[PATCH v2 1/2] net: phy: Let gmiitorgmii converter create additional PHY

[Tapio Reijonen]

Change the order to connect gmiitorgmii before PHY creation.
The gmiitorgmii create additional in DTS configured PHY during
it's configuration. This ensures, that converter sits between the
MAC and the external phy
MAC <==> GMII2RGMII <==> RGMII_PHY.

Fixes: a744a284e354 ("net: phy: Add support for ethernet-phy-id with gpio reset")
Signed-off-by: Tapio Reijonen <tapio.reijonen at vaisala.com>

---

(no changes since v1)

---
 drivers/net/phy/phy.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 716a1d461115..740533adecac 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -939,14 +939,14 @@ struct phy_device *phy_connect(struct mii_dev *bus, int addr,
 		phydev = phy_device_create(bus, 0, PHY_NCSI_ID, false);
 #endif
 
-#ifdef CONFIG_PHY_ETHERNET_ID
+#ifdef CONFIG_PHY_XILINX_GMII2RGMII
 	if (!phydev)
-		phydev = phy_connect_phy_id(bus, dev, addr);
+		phydev = phy_connect_gmii2rgmii(bus, dev);
 #endif
 
-#ifdef CONFIG_PHY_XILINX_GMII2RGMII
+#ifdef CONFIG_PHY_ETHERNET_ID
 	if (!phydev)
-		phydev = phy_connect_gmii2rgmii(bus, dev);
+		phydev = phy_connect_phy_id(bus, dev, addr);
 #endif
 
 	if (!phydev)
-- 
2.39.5