[PATCH 6/8] power: pmic: sunxi: add SPL support for the AXP803

[Jernej Škrabec]

Dne petek, 17. januar 2025 ob 02:45:35 Srednjeevropski standardni čas je Andre Przywara napisal(a):
> The AXP803 has been around for about a decade now, but so far we didn't
> need SPL support, since the DRAM rail was wired up correctly at reset.
> 
> Now some boards using the A133 SoC use the (compatible) AXP707 with DDR4
> memory, which requires the SPL to set the required 1.1V voltage manually.
> 
> Add the descriptions for the DC/DC regulators of the AXP803, and enable
> that when CONFIG_AXP803_POWER is enabled.
> 
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>

Acked-by: Jernej Skrabec <jernej.skrabec at gmail.com>

Best regards,
Jernej