[PATCH] Fix fastboot handling of partitions when no slots are supported
Mattijs Korpershoek
mkorpershoek at baylibre.com
Fri Jan 31 08:26:47 CET 2025
Hi Federico,
On jeu., janv. 30, 2025 at 16:03, Federico Fuga <fuga at studiofuga.com> wrote:
> Hi Mattijs,
>
> thanks for your kind response and suggestions.
Happy to help!
>
> We are actually suspending the development on this board, because it
> seems the support for our hardware (sunxi A33) requires too much work
> than expected. We were trying to update our 2018-flavoured bootloader
> but it seems we did a lot of steps back, for reason I can't fully grasp.
>
> Anyway, I'll try to work on this patch in my spare time.
Thank you for contributing, it's very appreciated.
>
>
> Specifically:
>
>
>
> On 30/01/25 14:49, Mattijs Korpershoek wrote:
>> Hi Federico,
>>
>> Thank you for the patch.
>>
>> On mar., janv. 28, 2025 at 12:18, Federico Fuga via B4 Relay <devnull+fuga.studiofuga.com at kernel.org> wrote:
>>
>>> From: Federico Fuga <fuga at studiofuga.com>
>>>
>>> The fastboot module has a bug that prevents some command to work
>>> properly on devices that haven't an Android-like partition scheme, that
>>> is, just one spl and one kernel partition, instead of the redundant
>>> scheme with _a and _b slots.
>>>
>>> This is the schema of our NAND storage (board is based on an AllWinner
>>> A33 sunxi chip):
>>>
>>> => mtdparts
>>>
>>> device nand0 <1c03000.nand>, # parts = 4
>>> #: name size net size offset mask_flags
>>> 0: spl 0x00020000 0x00020000 0x00000000 0
>>> 1: uboot 0x00100000 0x00100000 0x00020000 0
>>> 2: kernel_a 0x00400000 0x00400000 0x00120000 0
>>> 3: ubi 0x07ae0000 0x079e0000 (!) 0x00520000 0
>>>
>>> active partition: nand0,0 - (spl) 0x00020000 @ 0x00000000
>>>
>>> This happens when we try to erase the spl partition using fastboot:
>>>
>>> $ fastboot erase spl
>>> Erasing 'spl_a' FAILED (remote: 'invalid NAND device')
>>> fastboot: error: Command failed
>>>
>>> The error occurs because getvars fails to handle the error returned by
>>> nand layer when a partition cannot be found.
>>>
>>> Indeed, getvar_get_part_info returns what is returned by
>>> fastboot_nand_get_part_info (0 on success, 1 on failure) but it should
>>> return -ENODEV or -EINVAL instead. Since the cause of failure is not
>>> returned by the nand function, I decided to return -EINVAL to make it
>>> simple.
>>>
>>> Signed-off-by: Federico Fuga <fuga at studiofuga.com>
>> I could apply this version, finally :)
>>
>> b4 got a bit confused since it has been send as a v1 but using the
>> following command worked for me:
>>
>> $ b4 shazam -s -l --check 20250128-fastboot_slot_fix-v1-1-1a4688936662 at studiofuga.com -v1
>
>
> Yes I did notice this, I tried it after sending and I was puzzled why it
> spit out the same error as before. I'm still learning.
b4 tries to do some intelligent lookup where it matches the subject name
to find "other versions" of the same patch. Since it found some other
patch with V2, it thought it was the latest one.
If you keep using b4 this should not happen anymore, as it automatically
increments the patch version.
>
>
>> Now for the patch itself:
>>
>> Please use 'fastboot:' prefix as a commit title.
>> Use '$ git log --oneline -- drivers/fastboot/' to see what other commits
>> where using as a title.
>>
>> Some more comments below. Please make sure to answer this email to
>> acknowledge/reject review feedback.
>> Also, when sending a v2, please make sure to include a changelog.
>>
>> If you need help setting things up properly, let me know. I'm also
>> reachable on IRC https://libera.chat/, channel #u-boot, my nickame is mkorpershoek.
>
>
> Thanks, I'll surely do.
Do not hesitate. I'm not always around but I try to answer when possible :)
>
>
>>> ---
>>> drivers/fastboot/fb_getvar.c | 5 ++++-
>>> drivers/fastboot/fb_nand.c | 2 +-
>>> 2 files changed, 5 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/fastboot/fb_getvar.c b/drivers/fastboot/fb_getvar.c
>>> index 9c2ce65a4e5bce0da6b18aa1b2818f7db556c528..816ed8a6213b5c1f0948a813c6f6a865a4b47ba8 100644
>>> --- a/drivers/fastboot/fb_getvar.c
>>> +++ b/drivers/fastboot/fb_getvar.c
>>> @@ -121,8 +121,11 @@ static int getvar_get_part_info(const char *part_name, char *response,
>>> *size = disk_part.size * disk_part.blksz;
>>> } else if (IS_ENABLED(CONFIG_FASTBOOT_FLASH_NAND)) {
>>> r = fastboot_nand_get_part_info(part_name, &part_info, response);
>>> - if (r >= 0 && size)
>>> + if (r == 0 && size) {
>>> *size = part_info->size;
>> Maybe the patch is simpler this way, but I think that it would be better
>> if fastboot_mmc_get_part_info() and fastboot_nand_get_part_info() would
>> behave the same. The naming is pretty close already, and having
>> different behaviours/return codes seems confusing to me.
>
>
> Indeed, having the same code would be definitely proper.
Yes. I thinks that if fastboot_mmc_get_part_info() and
fastboot_nand_get_part_info() don't behave the same, it will cause
confusing.
>
>
>> Is there a strong reason for not modifying fb_nand_lookup() so that it
>> will return a negative error code?
>
>
> The reason was I didn't think about it. I misread the code and thought
> the error code were different.
Ok, thanks
>
>
>>
>> This way, we can keep the same logic in getvar_get_part_info()
>>> + } else {
>>> + r = -EINVAL;
>>> + }
>>> } else {
>>> fastboot_fail("this storage is not supported in bootloader", response);
>>> r = -ENODEV;
>>> diff --git a/drivers/fastboot/fb_nand.c b/drivers/fastboot/fb_nand.c
>>> index afc64fd5280717ae4041ed70268ccc01cfbb0496..9e2f7c01895785a4409eb67ea48abd02a6a6da26 100644
>>> --- a/drivers/fastboot/fb_nand.c
>>> +++ b/drivers/fastboot/fb_nand.c
>>> @@ -151,7 +151,7 @@ static lbaint_t fb_nand_sparse_reserve(struct sparse_storage *info,
>>> *
>>> * @part_name: Named device to lookup
>>> * @part_info: Pointer to returned part_info pointer
>>> - * @response: Pointer to fastboot response buffer
>>> + * @response: 0 on success, 1 otherwise
>> Why has this been modified? @response is still a pointer to fastboot
>> response buffer.
>
>
> Yes, reason is same as above. I simply misread the code.
Understood.
>
>
> Thanks
>
>
> Federico
>
>
>> If we wish to document the return code, use the Return: syntax:
>>
>> For example, here it would be:
>>
>> /**
>> * fastboot_nand_get_part_info() - Lookup NAND partion by name
>> *
>> * @part_name: Named device to lookup
>> * @part_info: Pointer to returned part_info pointer
>> * @response: Pointer to fastboot response buffer
>> *
>> * Return: 0 on success, 1 otherwise
>> */
>>
>>> */
>>> int fastboot_nand_get_part_info(const char *part_name,
>>> struct part_info **part_info, char *response)
>>>
>>> ---
>>> base-commit: a517796cfa5d8f4ca2f0c11c78c24a08a102c047
>>> change-id: 20250128-fastboot_slot_fix-69251576d9bb
>>>
>>> Best regards,
>>> --
>>> Federico Fuga <fuga at studiofuga.com>
More information about the U-Boot
mailing list