[PATCH 05/13] configs: am68: Add configs for enabling Ethboot in R5SPL

[Chintan Vankar]

Add configs for enabling Ethernet boot in R5SPL.

Signed-off-by: Chintan Vankar <c-vankar at ti.com>
---
 configs/am68_sk_r5_ethboot_defconfig | 80 ++++++++++++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 configs/am68_sk_r5_ethboot_defconfig

diff --git a/configs/am68_sk_r5_ethboot_defconfig b/configs/am68_sk_r5_ethboot_defconfig
new file mode 100644
index 00000000000..9bfbb5a3bfe
--- /dev/null
+++ b/configs/am68_sk_r5_ethboot_defconfig
@@ -0,0 +1,80 @@
+#include <configs/am68_sk_r5_defconfig>
+
+CONFIG_ARM=y
+CONFIG_ARCH_K3=y
+CONFIG_SOC_K3_J721S2=y
+CONFIG_TARGET_J721S2_R5_EVM=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-am68-sk-r5-base-board"
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x200000
+CONFIG_SPL_DMA=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_ETH=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_NET=y
+CONFIG_SPL_NET_VCI_STRING="AM68 U-Boot R5 SPL"
+CONFIG_CMD_DHCP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
+CONFIG_DM_I2C=y
+CONFIG_PHY_TI_DP83867=y
+CONFIG_TI_AM65_CPSW_NUSS=y
+CONFIG_SPI=n
+CONFIG_SPL_SPI=n
+CONFIG_DM_SPI=n
+CONFIG_SPL_DM_SPI=n
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPI_MEM=n
+CONFIG_CMD_FAT=n
+CONFIG_FS_FAT=n
+CONFIG_SPL_FS_FAT=n
+CONFIG_MMC_SDHCI=n
+CONFIG_MTD=n
+CONFIG_CMD_FAT=n
+CONFIG_SYS_RELOC_GD_ENV_ADD=y
+CONFIG_SPL_DM_SPI_FLASH=n
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=n
+CONFIG_HUSH_PARSER=n
+CONFIG_CMD_DFU=n
+CONFIG_CMD_GPT=n
+CONFIG_SPL_YMODEM_SUPPORT=n
+CONFIG_ARCH_FIXUP_FDT_MEMORY=n
+CONFIG_SPL_ENV_IS_NOWHERE=y
+CONFIG_DM_EVENT=y
+CONFIG_INPUT=n
+CONFIG_ESM_K3=y
+CONFIG_SPL_LOAD_BLOCK=y
+CONFIG_DFU=n
+CONFIG_SPL_DFU=n
+CONFIG_TI_I2C_BOARD_DETECT=y
+CONFIG_K3_EARLY_CONS=n
+CONFIG_K3_QOS=n
+CONFIG_USE_BOOTCOMMAND=n
+CONFIG_SPL_MTD=n
+CONFIG_SPL_NAND_SPI_SUPPORT=n
+CONFIG_BOOTDEV_ETH=y
+CONFIG_USB=n
+CONFIG_FS_LOADER=n
+CONFIG_SPL_FS_LOADER=n
+CONFIG_SPL_DM_SPI=y
+CONFIG_PINCTRL_GENERIC=n
+CONFIG_PINMUX=n
+CONFIG_SPL_PINCTRL_GENERIC=n
+CONFIG_SPL_PINMUX=n
+CONFIG_DM_REGULATOR=n
+CONFIG_TI_SCI_POWER_DOMAIN=n
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_SYSRESET=n
+CONFIG_LAST_STAGE_INIT=y
+CONFIG_OF_UPSTREAM=n
+CONFIG_K3_DM_FW=y
+CONFIG_SPL_SPI_LOAD=n
+CONFIG_SPL_DM_SPI=n
+CONFIG_NOR_SUPPORT=n
+CONFIG_SPL_NOR_SUPPORT=n
+CONFIG_SPL_DM_SPI=n
+CONFIG_SYS_MALLOC_CLEAR_ON_INIT=n
+CONFIG_SPL_SYS_MALLOC_CLEAR_ON_INIT=n
+CONFIG_BOOTDEV_ETH=n
-- 
2.34.1