[PATCH 4/4] drivers: clk: qcom: Add SDM630/660 GCC driver
Caleb Connolly
caleb.connolly at linaro.org
Wed Jan 8 15:45:10 CET 2025
Hi Alexey,
On 08/01/2025 12:59, Alexey Minnekhanov wrote:
> Add driver for Global Clock Controller used in Qualcomm
> SDM630/660 SoCs.
>
> Signed-off-by: Alexey Minnekhanov <alexeymin at postmarketos.org>
> ---
> drivers/clk/qcom/Kconfig | 8 ++
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/clock-sdm660.c | 180 ++++++++++++++++++++++++++++++++
> 3 files changed, 189 insertions(+)
> create mode 100644 drivers/clk/qcom/clock-sdm660.c
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index d76fca5dba41..29767ab256f3 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -47,6 +47,14 @@ config CLK_QCOM_QCS404
> on the Snapdragon QCS404 SoC. This driver supports the clocks
> and resets exposed by the GCC hardware block.
>
> +config CLK_QCOM_SDM660
> + bool "Qualcomm SDM630/660 GCC"
> + select CLK_QCOM
> + help
> + Say Y here to enable support for the Global Clock Controller
> + on the Snapdragon 630/660 SoCs. This driver supports the clocks
> + and resets exposed by the GCC hardware block.
> +
> config CLK_QCOM_SDM845
> bool "Qualcomm SDM845 GCC"
> select CLK_QCOM
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index ab33f1c5faf9..3065ba90cb7a 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -3,6 +3,7 @@
> # (C) Copyright 2023 Linaro
>
> obj-y += clock-qcom.o
> +obj-$(CONFIG_CLK_QCOM_SDM660) += clock-sdm660.o
> obj-$(CONFIG_CLK_QCOM_SDM845) += clock-sdm845.o
> obj-$(CONFIG_CLK_QCOM_APQ8016) += clock-apq8016.o
> obj-$(CONFIG_CLK_QCOM_APQ8096) += clock-apq8096.o
> diff --git a/drivers/clk/qcom/clock-sdm660.c b/drivers/clk/qcom/clock-sdm660.c
> new file mode 100644
> index 000000000000..c4cd49f39a57
> --- /dev/null
> +++ b/drivers/clk/qcom/clock-sdm660.c
> @@ -0,0 +1,180 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Clock drivers for Qualcomm sdm630/660
> + */
> +
> +#include <clk-uclass.h>
> +#include <dm.h>
> +#include <linux/delay.h>
> +#include <asm/io.h>
> +#include <linux/bitops.h>
> +#include <linux/bug.h>
> +#include <dt-bindings/clock/qcom,gcc-sdm660.h>
> +
> +#include "clock-qcom.h"
> +
> +#define GCC_BLSP1_UART2_APPS_CLK_CMD_RCGR 0x1c00c
> +#define SDCC1_APPS_CLK_CMD_RCGR 0x1602c
> +#define SDCC2_APPS_CLK_CMD_RCGR 0x14010
> +
> +/* blsp1_uart{1,2}_apps_clk_src share the same frequency table */
> +static const struct freq_tbl ftbl_blsp1_uart1_apps_clk_src[] = {
> + F(3686400, CFG_CLK_SRC_GPLL0, 1, 96, 15625),
> + F(7372800, CFG_CLK_SRC_GPLL0, 1, 192, 15625),
> + F(14745600, CFG_CLK_SRC_GPLL0, 1, 384, 15625),
> + F(16000000, CFG_CLK_SRC_GPLL0, 5, 2, 15),
> + F(19200000, CFG_CLK_SRC_CXO, 1, 0, 0),
> + F(24000000, CFG_CLK_SRC_GPLL0, 5, 1, 5),
> + F(32000000, CFG_CLK_SRC_GPLL0, 1, 4, 75),
> + F(40000000, CFG_CLK_SRC_GPLL0, 15, 0, 0),
> + F(46400000, CFG_CLK_SRC_GPLL0, 1, 29, 375),
> + F(48000000, CFG_CLK_SRC_GPLL0, 12.5, 0, 0),
> + F(51200000, CFG_CLK_SRC_GPLL0, 1, 32, 375),
> + F(56000000, CFG_CLK_SRC_GPLL0, 1, 7, 75),
> + F(58982400, CFG_CLK_SRC_GPLL0, 1, 1536, 15625),
> + F(60000000, CFG_CLK_SRC_GPLL0, 10, 0, 0),
> + F(63157895, CFG_CLK_SRC_GPLL0, 9.5, 0, 0),
> + { }
> +};
> +
> +/*
> + * In Linux's parent_map for this clock ( gcc_parent_map_xo_gpll0_gpll0_early_div_gpll4 ):
> + * { P_GPLL0_EARLY_DIV, 2 }
> + */
> +#define CFG_CLK_SRC_GPLL0_EARLY_DIV_SDCC2 (2 << 8)
This can go into clock-qcom.h with the others.
With that, please add
Reviewed-by: Caleb Connolly <caleb.connolly at linaro.org>
Kind regards,
> +
> +static const struct freq_tbl ftbl_sdcc2_apps_clk_src[] = {
> + F(144000, CFG_CLK_SRC_CXO, 16, 3, 25),
> + F(400000, CFG_CLK_SRC_CXO, 12, 1, 4),
> + F(20000000, CFG_CLK_SRC_GPLL0_EARLY_DIV_SDCC2, 5, 1, 3),
> + F(25000000, CFG_CLK_SRC_GPLL0_EARLY_DIV_SDCC2, 6, 1, 2),
> + F(50000000, CFG_CLK_SRC_GPLL0_EARLY_DIV_SDCC2, 6, 0, 0),
> + F(100000000, CFG_CLK_SRC_GPLL0, 6, 0, 0),
> + F(192000000, CFG_CLK_SRC_GPLL4, 8, 0, 0),
> + F(200000000, CFG_CLK_SRC_GPLL0, 3, 0, 0),
> + { }
> +};
> +
> +static const struct pll_vote_clk gpll0_clk = {
> + .status = 0,
> + .status_bit = BIT(31),
> + .ena_vote = 0x52000,
> + .vote_bit = BIT(0),
> +};
> +
> +static const struct gate_clk sdm660_clks[] = {
> + GATE_CLK(GCC_BLSP1_AHB_CLK, 0x52004, BIT(17)),
> + GATE_CLK(GCC_SDCC1_AHB_CLK, 0x16008, BIT(0)),
> + GATE_CLK(GCC_SDCC1_APPS_CLK, 0x16004, BIT(0)),
> + GATE_CLK(GCC_SDCC1_ICE_CORE_CLK, 0x1600c, BIT(0)),
> + GATE_CLK(GCC_SDCC2_AHB_CLK, 0x14008, BIT(0)),
> + GATE_CLK(GCC_SDCC2_APPS_CLK, 0x14004, BIT(0)),
> +};
> +
> +static ulong sdm660_gcc_set_rate(struct clk *clk, ulong rate)
> +{
> + struct msm_clk_priv *priv = dev_get_priv(clk->dev);
> + const struct freq_tbl *ftbl_entry;
> +
> + debug("%s: clk %s rate %lu\n", __func__, sdm660_clks[clk->id].name, rate);
> +
> + switch (clk->id) {
> + case GCC_BLSP1_UART2_APPS_CLK:
> + ftbl_entry = qcom_find_freq(ftbl_blsp1_uart1_apps_clk_src, rate);
> + clk_rcg_set_rate_mnd(priv->base, GCC_BLSP1_UART2_APPS_CLK_CMD_RCGR,
> + ftbl_entry->pre_div, ftbl_entry->m, ftbl_entry->n,
> + ftbl_entry->src, 8);
> + return ftbl_entry->freq;
> + case GCC_SDCC2_APPS_CLK:
> + ftbl_entry = qcom_find_freq(ftbl_sdcc2_apps_clk_src, rate);
> + /* we probably should enable source PLL for the selected frequency */
> + switch (ftbl_entry->src) {
> + case CFG_CLK_SRC_GPLL0:
> + /* enable gpll0 */
> + clk_enable_gpll0(priv->base, &gpll0_clk);
> + break;
> + case CFG_CLK_SRC_GPLL4:
> + /* enable gpll4 */
> + debug("can't use GPLL4 as src for SDCC2_APPS_CLK, req rate: %lu", rate);
> + break;
> + case CFG_CLK_SRC_GPLL0_EARLY_DIV_SDCC2:
> + /* enable gpll0_early */
> + debug("can't use GPLL0_EARLY as src for SDCC2_APPS_CLK, req rate: %lu",
> + rate);
> + break;
> + }
> + clk_rcg_set_rate_mnd(priv->base, SDCC2_APPS_CLK_CMD_RCGR,
> + ftbl_entry->pre_div, ftbl_entry->m, ftbl_entry->n,
> + ftbl_entry->src, 8);
> + return ftbl_entry->freq;
> + case GCC_SDCC1_APPS_CLK:
> + /* The firmware turns this on for us and always sets it to this rate */
> + return 384000000;
> + default:
> + debug("clock-sdm660: set_rate for some unknown clock %lu\n", clk->id);
> + return rate;
> + }
> +}
> +
> +static int sdm660_gcc_enable(struct clk *clk)
> +{
> + struct msm_clk_priv *priv = dev_get_priv(clk->dev);
> +
> + if (priv->data->num_clks < clk->id) {
> + debug("unknown clk id %lu\n", clk->id);
> + return 0;
> + }
> +
> + debug("enable clk %s\n", sdm660_clks[clk->id].name);
> + qcom_gate_clk_en(priv, clk->id);
> +
> + return 0;
> +}
> +
> +static const struct qcom_reset_map sdm660_gcc_resets[] = {
> + [GCC_QUSB2PHY_PRIM_BCR] = { 0x12000 },
> + [GCC_QUSB2PHY_SEC_BCR] = { 0x12004 },
> + /*
> + * Linux dt-bindings (and sdm630 dtsi) don't have the defines for
> + * (or uses of) GCC_SDCCn_BCR resets, so this won't compile,
> + * but the hardware exists and their offsets are:
> + */
> + /* [GCC_SDCC1_BCR] = { 0x16000 }, */
> + /* [GCC_SDCC2_BCR] = { 0x14000 }, */
> + [GCC_USB_20_BCR] = { 0x2f000 },
> + [GCC_USB_30_BCR] = { 0xf000 },
> + [GCC_USB3_PHY_BCR] = { 0x50020 },
> + [GCC_USB3PHY_PHY_BCR] = { 0x50024 },
> +};
> +
> +static const struct qcom_power_map sdm660_gdscs[] = {
> + [USB_30_GDSC] = { .reg = 0xf004, .flags = VOTABLE },
> +};
> +
> +static struct msm_clk_data sdm660_gcc_data = {
> + .resets = sdm660_gcc_resets,
> + .num_resets = ARRAY_SIZE(sdm660_gcc_resets),
> + .clks = sdm660_clks,
> + .num_clks = ARRAY_SIZE(sdm660_clks),
> + .power_domains = sdm660_gdscs,
> + .num_power_domains = ARRAY_SIZE(sdm660_gdscs),
> +
> + .enable = sdm660_gcc_enable,
> + .set_rate = sdm660_gcc_set_rate,
> +};
> +
> +static const struct udevice_id gcc_sdm660_of_match[] = {
> + {
> + .compatible = "qcom,gcc-sdm660",
> + .data = (ulong)&sdm660_gcc_data,
> + },
> + {}
> +};
> +
> +U_BOOT_DRIVER(gcc_sdm660) = {
> + .name = "gcc_sdm660",
> + .id = UCLASS_NOP,
> + .of_match = gcc_sdm660_of_match,
> + .bind = qcom_cc_bind,
> + .flags = DM_FLAG_PRE_RELOC,
> +};
--
// Caleb (they/them)
More information about the U-Boot
mailing list