[PATCH 04/10] video: Add BOE TH101MB31IG002-28A MIPI-DSI panel
Dang Huynh
danct12 at riseup.net
Thu Jan 16 10:15:53 CET 2025
BOE TH101MB31IG002-28A is a MIPI-DSI panel used in the Pine64
PineTab2.
Signed-off-by: Dang Huynh <danct12 at riseup.net>
---
drivers/video/Kconfig | 10 ++
drivers/video/Makefile | 1 +
drivers/video/boe-th101mb31ig002-28a.c | 231 +++++++++++++++++++++++++++++++++
3 files changed, 242 insertions(+)
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 3c3cebaacd02b847e2817d465123b088edfc70c0..bb76df7b7d5ef426b018f37160f4d0863f087f57 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -531,6 +531,16 @@ config VIDEO_BCM2835
that same resolution (or as near as possible) and 32bpp depth, so
that U-Boot can access it with full colour depth.
+config VIDEO_LCD_BOE_TH101MB31IG002_28A
+ bool "BOE TH101MB31IG002-28A DSI LCD panel support"
+ depends on PANEL && BACKLIGHT
+ select VIDEO_MIPI_DSI
+ help
+ Say Y here if you want to enable support for BOE TH101MB31IG002-28A
+ panel.
+
+ This panel has a 800x1280 resolution and uses 24 bit RGB per pixel.
+
config VIDEO_LCD_ENDEAVORU
tristate "Endeavoru 720x1280 DSI video mode panel"
depends on PANEL && BACKLIGHT
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 5a00438ce0648effdcade42ee255f037c65b00d3..d41e3ad5750fc0de4451d7c0be0e9fc7074ce532 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_VIDEO_EFI) += efi.o
obj-$(CONFIG_VIDEO_IPUV3) += imx/
obj-$(CONFIG_VIDEO_IVYBRIDGE_IGD) += ivybridge_igd.o
obj-$(CONFIG_VIDEO_LCD_ANX9804) += anx9804.o
+obj-$(CONFIG_VIDEO_LCD_BOE_TH101MB31IG002_28A) += boe-th101mb31ig002-28a.o
obj-$(CONFIG_VIDEO_LCD_ENDEAVORU) += endeavoru-panel.o
obj-$(CONFIG_VIDEO_LCD_HIMAX_HX8394) += himax-hx8394.o
obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
diff --git a/drivers/video/boe-th101mb31ig002-28a.c b/drivers/video/boe-th101mb31ig002-28a.c
new file mode 100644
index 0000000000000000000000000000000000000000..6182ac2f5fba0176cf28a662384e6e3a7b709e10
--- /dev/null
+++ b/drivers/video/boe-th101mb31ig002-28a.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023 Alexander Warnecke <awarnecke002 at hotmail.com>
+ * Copyright (c) 2023 Manuel Traut <manut at mecka.net>
+ * Copyright (c) 2023 Dang Huynh <danct12 at riseup.net>
+ */
+
+#include <backlight.h>
+#include <dm.h>
+#include <mipi_dsi.h>
+#include <panel.h>
+#include <asm/gpio.h>
+#include <dm/device_compat.h>
+#include <linux/delay.h>
+#include <power/regulator.h>
+
+struct th101mb31ig002_28a_panel_priv {
+ struct udevice *backlight;
+ struct udevice *reg_power;
+ struct gpio_desc enable;
+ struct gpio_desc reset;
+};
+
+static const struct display_timing boe_th101mb31ig002_default_timing = {
+ .pixelclock.typ = 73500000,
+ .hactive.typ = 800,
+ .hfront_porch.typ = 64,
+ .hback_porch.typ = 64,
+ .hsync_len.typ = 16,
+ .vactive.typ = 1280,
+ .vfront_porch.typ = 2,
+ .vback_porch.typ = 12,
+ .vsync_len.typ = 4,
+};
+
+#define dsi_dcs_write_seq(device, seq...) do { \
+ static const u8 d[] = { seq }; \
+ int ret; \
+ ret = mipi_dsi_dcs_write_buffer(device, d, ARRAY_SIZE(d)); \
+ if (ret < 0) \
+ return ret; \
+ } while (0)
+
+static int th101mb31ig002_28a_init_sequence(struct udevice *dev)
+{
+ struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
+ struct mipi_dsi_device *device = plat->device;
+ int ret;
+
+ dsi_dcs_write_seq(device, 0xE0, 0xAB, 0xBA);
+ dsi_dcs_write_seq(device, 0xE1, 0xBA, 0xAB);
+ dsi_dcs_write_seq(device, 0xB1, 0x10, 0x01, 0x47, 0xFF);
+ dsi_dcs_write_seq(device, 0xB2, 0x0C, 0x14, 0x04, 0x50, 0x50, 0x14);
+ dsi_dcs_write_seq(device, 0xB3, 0x56, 0x53, 0x00);
+ dsi_dcs_write_seq(device, 0xB4, 0x33, 0x30, 0x04);
+ dsi_dcs_write_seq(device, 0xB6, 0xB0, 0x00, 0x00, 0x10, 0x00, 0x10, 0x00);
+ dsi_dcs_write_seq(device, 0xB8, 0x05, 0x12, 0x29, 0x49, 0x48, 0x00, 0x00);
+ dsi_dcs_write_seq(device, 0xB9, 0x7C, 0x65, 0x55, 0x49, 0x46, 0x36, 0x3B, 0x24, 0x3D,
+ 0x3C, 0x3D, 0x5C, 0x4C, 0x55, 0x47, 0x46, 0x39, 0x26, 0x06, 0x7C, 0x65,
+ 0x55, 0x49, 0x46, 0x36, 0x3B, 0x24, 0x3D, 0x3C, 0x3D, 0x5C, 0x4C, 0x55,
+ 0x47, 0x46, 0x39, 0x26, 0x06);
+ dsi_dcs_write_seq(device, 0xC0, 0xFF, 0x87, 0x12, 0x34, 0x44, 0x44, 0x44,
+ 0x44, 0x98, 0x04, 0x98, 0x04, 0x0F, 0x00, 0x00, 0xC1);
+ dsi_dcs_write_seq(device, 0xC1, 0x54, 0x94, 0x02, 0x85, 0x9F, 0x00, 0x7F, 0x00, 0x54,
+ 0x00);
+ dsi_dcs_write_seq(device, 0xC2, 0x17, 0x09, 0x08, 0x89, 0x08, 0x11, 0x22, 0x20, 0x44,
+ 0xFF, 0x18, 0x00);
+ dsi_dcs_write_seq(device, 0xC3, 0x86, 0x46, 0x05, 0x05, 0x1C, 0x1C, 0x1D, 0x1D, 0x02,
+ 0x1F, 0x1F, 0x1E, 0x1E, 0x0F, 0x0F, 0x0D, 0x0D, 0x13, 0x13, 0x11, 0x11,
+ 0x00);
+ dsi_dcs_write_seq(device, 0xC4, 0x07, 0x07, 0x04, 0x04, 0x1C, 0x1C, 0x1D, 0x1D, 0x02,
+ 0x1F, 0x1F, 0x1E, 0x1E, 0x0E, 0x0E, 0x0C, 0x0C, 0x12, 0x12, 0x10, 0x10,
+ 0x00);
+ dsi_dcs_write_seq(device, 0xC6, 0x2A, 0x2A);
+ dsi_dcs_write_seq(device, 0xC8, 0x21, 0x00, 0x31, 0x42, 0x34, 0x16);
+ dsi_dcs_write_seq(device, 0xCA, 0xCB, 0x43);
+ dsi_dcs_write_seq(device, 0xCD, 0x0E, 0x4B, 0x4B, 0x20, 0x19, 0x6B, 0x06, 0xB3);
+ dsi_dcs_write_seq(device, 0xD2, 0xE3, 0x2B, 0x38, 0x00);
+ dsi_dcs_write_seq(device, 0xD4, 0x00, 0x01, 0x00, 0x0E, 0x04, 0x44, 0x08, 0x10, 0x00,
+ 0x00, 0x00);
+ dsi_dcs_write_seq(device, 0xE6, 0x80, 0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF);
+ dsi_dcs_write_seq(device, 0xF0, 0x12, 0x03, 0x20, 0x00, 0xFF);
+ dsi_dcs_write_seq(device, 0xF3, 0x00);
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(device);
+ if (ret)
+ return ret;
+
+ mdelay(120);
+
+ ret = mipi_dsi_dcs_set_display_on(device);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int th101mb31ig002_28a_panel_enable_backlight(struct udevice *dev)
+{
+ struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
+ struct mipi_dsi_device *device = plat->device;
+ struct th101mb31ig002_28a_panel_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = mipi_dsi_attach(device);
+ if (ret < 0) {
+ printf("mipi_dsi_attach failed %d\n", ret);
+ return ret;
+ }
+
+ ret = th101mb31ig002_28a_init_sequence(dev);
+ if (ret) {
+ printf("hx8394_init_sequence failed %d\n", ret);
+ return ret;
+ }
+
+ if (priv->backlight) {
+ ret = backlight_enable(priv->backlight);
+ if (ret) {
+ printf("backlight enabled failed %d\n", ret);
+ return ret;
+ }
+
+ backlight_set_brightness(priv->backlight, 60);
+ }
+
+ mdelay(10);
+
+ return 0;
+}
+
+static int th101mb31ig002_28a_panel_get_display_timing(struct udevice *dev,
+ struct display_timing *timings)
+{
+ memcpy(timings, &boe_th101mb31ig002_default_timing, sizeof(*timings));
+
+ return 0;
+}
+
+static int th101mb31ig002_28a_panel_of_to_plat(struct udevice *dev)
+{
+ struct th101mb31ig002_28a_panel_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ if (CONFIG_IS_ENABLED(DM_REGULATOR)) {
+ ret = device_get_supply_regulator(dev, "power-supply",
+ &priv->reg_power);
+ if (ret && ret != -ENOENT) {
+ dev_err(dev, "Warning: cannot get power supply\n");
+ return ret;
+ }
+ }
+
+ ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
+ "backlight", &priv->backlight);
+ if (ret)
+ dev_warn(dev, "failed to get backlight\n");
+
+ ret = gpio_request_by_name(dev, "enable-gpios", 0, &priv->enable,
+ GPIOD_IS_OUT);
+ if (ret) {
+ dev_err(dev, "Failed to get enable GPIO (%d)\n", ret);
+ if (ret != -ENOENT)
+ return ret;
+ }
+
+ ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset,
+ GPIOD_IS_OUT);
+ if (ret) {
+ dev_err(dev, "Failed to get reset GPIO (%d)\n", ret);
+ if (ret != -ENOENT)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int th101mb31ig002_28a_panel_probe(struct udevice *dev)
+{
+ struct th101mb31ig002_28a_panel_priv *priv = dev_get_priv(dev);
+ struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
+ int ret;
+
+ if (CONFIG_IS_ENABLED(DM_REGULATOR) && priv->reg_power) {
+ ret = regulator_set_enable(priv->reg_power, true);
+ if (ret)
+ return ret;
+ }
+
+ /* enable panel */
+ dm_gpio_set_value(&priv->enable, 1);
+ mdelay(50);
+
+ /* reset panel */
+ dm_gpio_set_value(&priv->reset, 0);
+ udelay(100);
+ dm_gpio_set_value(&priv->reset, 1);
+ udelay(100);
+ dm_gpio_set_value(&priv->reset, 0);
+ mdelay(6);
+
+ plat->lanes = 4;
+ plat->format = MIPI_DSI_FMT_RGB888;
+ plat->mode_flags = MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_EOT_PACKET |
+ MIPI_DSI_MODE_LPM;
+
+ return 0;
+}
+
+static const struct panel_ops th101mb31ig002_28a_panel_ops = {
+ .enable_backlight = th101mb31ig002_28a_panel_enable_backlight,
+ .get_display_timing = th101mb31ig002_28a_panel_get_display_timing,
+};
+
+static const struct udevice_id th101mb31ig002_28a_ids[] = {
+ { .compatible = "boe,th101mb31ig002-28a", },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(th101mb31ig002_28a_panel) = {
+ .name = "th101mb31ig002_28a_panel",
+ .id = UCLASS_PANEL,
+ .of_match = th101mb31ig002_28a_ids,
+ .ops = &th101mb31ig002_28a_panel_ops,
+ .of_to_plat = th101mb31ig002_28a_panel_of_to_plat,
+ .probe = th101mb31ig002_28a_panel_probe,
+ .plat_auto = sizeof(struct mipi_dsi_panel_plat),
+ .priv_auto = sizeof(struct th101mb31ig002_28a_panel_priv),
+};
--
2.48.1
More information about the U-Boot
mailing list