[PATCH v3 6/6] configs: add qcs9100_defconfig

[Sumit Garg]

On Fri, 10 Jan 2025 at 10:39, Varadarajan Narayanan
<quic_varada at quicinc.com> wrote:
>
> Introduce a defconfig for the Ride R3 and other QCS9100 boards with a
> dedicated uefi partition. These can replace EDK2 entirely with U-Boot.
>
> Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> ---
> v3: Removed duplicates
>         CONFIG_ARM, CONFIG_PHY_QCOM_QMP_UFS & CONFIG_QCOM_UFS
> v2: Use qcs9100-ride-r3 for default DT instead of sa8775p-ride-r3
> ---
>  configs/qcs9100_defconfig | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>  create mode 100644 configs/qcs9100_defconfig
>

Reviewed-by: Sumit Garg <sumit.garg at linaro.org>

-Sumit

> diff --git a/configs/qcs9100_defconfig b/configs/qcs9100_defconfig
> new file mode 100644
> index 0000000000..10ff4d2539
> --- /dev/null
> +++ b/configs/qcs9100_defconfig
> @@ -0,0 +1,18 @@
> +# Configuration for building U-Boot to be flashed
> +# to the uefi partition of QCS9100 based dev boards with
> +# the "Linux Embedded" partition layout (which have
> +# a dedicated "uefi" partition for edk2/U-Boot)
> +
> +#include "qcom_defconfig"
> +
> +CONFIG_DEBUG_UART=y
> +CONFIG_DEBUG_UART_ANNOUNCE=y
> +CONFIG_DEBUG_UART_BASE=0xA8C000
> +CONFIG_DEBUG_UART_MSM_GENI=y
> +CONFIG_DEBUG_UART_CLOCK=14745600
> +
> +# Address where U-Boot will be loaded
> +CONFIG_TEXT_BASE=0xaf000000
> +CONFIG_REMAKE_ELF=y
> +
> +CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs9100-ride-r3"
> --
> 2.34.1
>