[PATCH] arm: The CHIP DIP SCAN option should not be displayed in other mach

[Andre Przywara]

On Tue, 28 Jan 2025 21:37:37 +0800
1425075683 at qq.com wrote:

Hi,

> From: Liya Huang <1425075683 at qq.com>
> 
> When I use mach STM32,
> menuconfig sees this option; It bothers me.
> I observed that the root cause was that the
> option was not included in the endif,
> but when I tried to fix it, an error occurred.

Can you say what the error is, exactly?
Because you are right, it should be before the endif.
I moved that, and compiled it for all Allwinner boards, which worked.
So what is the problem there, exactly?

Cheers,
Andre

> I didn't find a solution. Only deponds can be used for hiding.
> 
> Signed-off-by: Liya Huang <1425075683 at qq.com>
> ---
> 
>  arch/arm/mach-sunxi/Kconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index ba1b1541437..48dd1e68363 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -1137,6 +1137,7 @@ endif
>  
>  config CHIP_DIP_SCAN
>  	bool "Enable DIPs detection for CHIP board"
> +	depends on ARCH_SUNXI
>  	select SUPPORT_EXTENSION_SCAN
>  	select W1
>  	select W1_GPIO