[PATCH v2 6/6] configs: add qcs9100_defconfig

[Varadarajan Narayanan]

Introduce a defconfig for the Ride R3 and other QCS9100 boards with a
dedicated uefi partition. These can replace EDK2 entirely with U-Boot.

Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
---
v2: Use qcs9100-ride-r3 for default DT instead of sa8775p-ride-r3
---
 configs/qcs9100_defconfig | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 configs/qcs9100_defconfig

diff --git a/configs/qcs9100_defconfig b/configs/qcs9100_defconfig
new file mode 100644
index 00000000000..7e72c64968b
--- /dev/null
+++ b/configs/qcs9100_defconfig
@@ -0,0 +1,24 @@
+# Configuration for building U-Boot to be flashed
+# to the uefi partition of QCS9100 based dev boards with
+# the "Linux Embedded" partition layout (which have
+# a dedicated "uefi" partition for edk2/U-Boot)
+
+#include "qcom_defconfig"
+
+# Otherwise buildman thinks this isn't an ARM platform
+CONFIG_ARM=y
+
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_BASE=0xA8C000
+CONFIG_DEBUG_UART_MSM_GENI=y
+CONFIG_DEBUG_UART_CLOCK=14745600
+
+# Address where U-Boot will be loaded
+CONFIG_TEXT_BASE=0xaf000000
+CONFIG_REMAKE_ELF=y
+
+CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs9100-ride-r3"
+
+CONFIG_PHY_QCOM_QMP_UFS=y
+CONFIG_QCOM_UFS=y
-- 
2.34.1