[PATCH 14/15] arm: dts: mediatek: update mt7981 mmc node

[Weijie Gao]

1. Fix mmc clock order of mt7981 to match the clock name
2. Limit the max clock of SD to 50MHz to meet SD Card Spec 2.0
3. Increase the CLK pin driving strength to 8mA

Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>
---
 arch/arm/dts/mt7981-sd-rfb.dts |  6 ++++--
 arch/arm/dts/mt7981.dtsi       | 12 ++++++------
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/arch/arm/dts/mt7981-sd-rfb.dts b/arch/arm/dts/mt7981-sd-rfb.dts
index 41cccf3bbe1..347c252af53 100644
--- a/arch/arm/dts/mt7981-sd-rfb.dts
+++ b/arch/arm/dts/mt7981-sd-rfb.dts
@@ -118,7 +118,7 @@
 		};
 		conf-clk {
 			pins = "SPI1_CS";
-			drive-strength = <MTK_DRIVE_6mA>;
+			drive-strength = <MTK_DRIVE_8mA>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 		conf-rst {
@@ -140,10 +140,12 @@
 };
 
 &mmc0 {
+	assigned-clock-parents = <&topckgen CLK_TOP_CB_NET2_D4>,
+				 <&topckgen CLK_TOP_CB_NET2_D2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_default>;
 	bus-width = <4>;
-	max-frequency = <52000000>;
+	max-frequency = <50000000>;
 	cap-sd-highspeed;
 	r_smpl = <0>;
 	vmmc-supply = <&reg_3p3v>;
diff --git a/arch/arm/dts/mt7981.dtsi b/arch/arm/dts/mt7981.dtsi
index 43e505826f5..2844ab010de 100644
--- a/arch/arm/dts/mt7981.dtsi
+++ b/arch/arm/dts/mt7981.dtsi
@@ -306,13 +306,13 @@
 		reg = <0x11230000 0x1000>,
 		      <0x11C20000 0x1000>;
 		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&topckgen CLK_TOP_EMMC_400M>,
-			 <&topckgen CLK_TOP_EMMC_208M>,
+		clocks = <&topckgen CLK_TOP_EMMC_208M>,
+			 <&topckgen CLK_TOP_EMMC_400M>,
 			 <&infracfg CLK_INFRA_MSDC_CK>;
-		assigned-clocks = <&topckgen CLK_TOP_EMMC_400M_SEL>,
-				  <&topckgen CLK_TOP_EMMC_208M_SEL>;
-		assigned-clock-parents = <&topckgen CLK_TOP_CB_NET2_D2>,
-					 <&topckgen CLK_TOP_CB_M_D2>;
+		assigned-clocks = <&topckgen CLK_TOP_EMMC_208M_SEL>,
+				  <&topckgen CLK_TOP_EMMC_400M_SEL>;
+		assigned-clock-parents = <&topckgen CLK_TOP_CB_M_D2>,
+					 <&topckgen CLK_TOP_CB_NET2_D2>;
 		clock-names = "source", "hclk", "source_cg";
 		status = "disabled";
 	};
-- 
2.34.1