[PATCH v4 20/20] imx95_evk: add i.MX95 19x19 EVK board basic support

[Tim Harvey]

On Thu, Jan 16, 2025 at 11:38 AM Tim Harvey <tharvey at gateworks.com> wrote:
>
> On Wed, Jan 15, 2025 at 5:30 AM Alice Guo <alice.guo at oss.nxp.com> wrote:
> >
> > From: Ye Li <ye.li at nxp.com>
> >
> > This patch adds i.MX95 19x19 EVK board basic support.
> >
> > Messaging unit for EdgeLock Secure Enclave, messaging unit for System
> > Manager, uSDHC for SD Card, gpio, lpuart are supported now.
> >
> > Signed-off-by: Ye Li <ye.li at nxp.com>
> > Signed-off-by: Alice Guo <alice.guo at nxp.com>
> > Reviewed-by: Peng Fan <peng.fan at nxp.com>
> > ---
> <snip...>
> > diff --git a/board/freescale/imx95_evk/imx95_evk.c b/board/freescale/imx95_evk/imx95_evk.c
> > new file mode 100644
> > index 0000000000000000000000000000000000000000..1ed15ca47b157067a7376b0b32101dc7f9899f4f
> > --- /dev/null
> > +++ b/board/freescale/imx95_evk/imx95_evk.c
> > @@ -0,0 +1,54 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2025 NXP
> > + */
> > +
> > +#include <env.h>
> > +#include <init.h>
> > +#include <asm/global_data.h>
> > +#include <asm/arch-imx9/ccm_regs.h>
> > +#include <asm/arch/clock.h>
> > +#include <fdt_support.h>
> > +#include <asm/io.h>
> > +#include <linux/bitfield.h>
> > +#include <linux/bitops.h>
> > +#include <linux/delay.h>
> > +#include <miiphy.h>
> > +#include <netdev.h>
> > +#include <asm/gpio.h>
> > +#include <asm/mach-imx/sys_proto.h>
> > +#include <scmi_agent.h>
> > +#include <scmi_protocols.h>
> > +#include "../../../dts/upstream/src/arm64/freescale/imx95-clock.h"
> > +#include "../../../dts/upstream/src/arm64/freescale/imx95-power.h"
>
> Hi Alice,
>
> Most of the above are not needed (and should be alphabetized anyway)
>
> The only ones needed are:
> #include <asm/arch/clock.h>
> #include <asm/gpio.h>
> #include <asm/mach-imx/sys_proto.h>
>
> > +
> > +DECLARE_GLOBAL_DATA_PTR;
>
> not needed as you don't use gd
>
> Best Regards,
>
> Tim

Hi Alic,

One more thing to do for next series. Refresh your
imx95_19x19_evk_defconfig as its very out of sync:

make imx95_19x19_evk_defconfig
make savedefconfig
cp defconfig configs/imx95_19x19_evk_defconfig

Best Regards,

Tim