[U-Boot][PATCH v4 4/5] fpga: xilinx exclusive commands

[Ibai Erkiaga]

Ensure all Xilinx exclusive fpga commands have a KConfig symbol and
dependency to FPGA_XILINX listed. Remove (Xilinx only) text from the
help command.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza at amd.com>
---

(no changes since v1)

 cmd/Kconfig | 10 +++++-----
 cmd/fpga.c  |  6 +++---
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/cmd/Kconfig b/cmd/Kconfig
index b362595af83..c9600498787 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1187,15 +1187,15 @@ config CMD_FPGA_LOADP
 	  a partial bitstream.
 
 config CMD_FPGA_LOADBP
-	bool "fpga loadbp - load partial bitstream (Xilinx only)"
-	depends on CMD_FPGA
+	bool "fpga loadbp - load partial bitstream"
+	depends on CMD_FPGA && FPGA_XILINX
 	help
 	  Supports loading an FPGA device from a bitstream buffer containing
 	  a partial bitstream.
 
 config CMD_FPGA_LOADFS
-	bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
-	depends on CMD_FPGA
+	bool "fpga loadfs - load bitstream from FAT filesystem"
+	depends on CMD_FPGA && FPGA_XILINX
 	help
 	  Supports loading an FPGA device from a FAT filesystem.
 
@@ -1207,7 +1207,7 @@ config CMD_FPGA_LOADMK
 
 config CMD_FPGA_LOAD_SECURE
 	bool "fpga loads - loads secure bitstreams"
-	depends on CMD_FPGA
+	depends on CMD_FPGA && FPGA_XILINX
 	select FPGA_LOAD_SECURE
 	help
 	  Enables the fpga loads command which is used to load secure
diff --git a/cmd/fpga.c b/cmd/fpga.c
index 13aabc95abc..75d2f824998 100644
--- a/cmd/fpga.c
+++ b/cmd/fpga.c
@@ -420,11 +420,11 @@ U_BOOT_CMD(fpga, 6, 1, do_fpga_wrapper,
 #endif
 #if defined(CONFIG_CMD_FPGA_LOADBP)
 	 "fpga loadbp <dev> <address> <size> Load device from bitstream buffer\n"
-	 "             with partial bitstream (Xilinx only)\n"
+	 "             with partial bitstream\n"
 #endif
 #if defined(CONFIG_CMD_FPGA_LOADFS)
 	 "fpga loadfs <dev> <address> <size> <blocksize> <interface> [<dev[:part]>] <filename>\n"
-	 "            Load device from filesystem (FAT by default) (Xilinx only)\n"
+	 "            Load device from filesystem (FAT by default)\n"
 #endif
 #if defined(CONFIG_CMD_FPGA_LOADMK)
 	 "fpga loadmk <dev> <address>        Load device generated with mkimage\n"
@@ -436,7 +436,7 @@ U_BOOT_CMD(fpga, 6, 1, do_fpga_wrapper,
 #if defined(CONFIG_CMD_FPGA_LOAD_SECURE)
 	 "fpga loads  <dev> <address> <size> <authflag> <encflag> [Userkey address]\n"
 	 "            Load device from memory buffer with secure bistream\n"
-	 "            (authenticated/encrypted/both)(Xilinx only)\n"
+	 "            (authenticated/encrypted/both)\n"
 	 "            -authflag: 0 for OCM, 1 for DDR, 2 for no authentication\n"
 	 "            (specifies where to perform authentication)\n"
 	 "            -encflag: 0 for device key, 1 for user key, 2 for no encryption\n"
-- 
2.42.0.325.g3a06386e31