[PATCH] pinctrl: rockchip: rk3328: Fix pinmux for GPIO2-B and GPIO3-B pins

[Jonas Karlman]

The pinmux bits for GPIO2-B0 to GPIO2-B6 actually have 2 bits width,
correct the bank flag for GPIO2-B. The pinmux bits for GPIO2-B7 is
recalculated so it remain unchanged. Add missing GPIO3-B1 to GPIO3-B7
pinmux data to rk3328_mux_recalced_data as mux register offset for these
pins does not follow rockchip convention.

This matches changes in following Linux commits:
- e8448a6c817c ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins")
- 5ef6914e0bf5 ("pinctrl: rockchip: fix pinmux bits for RK3328 GPIO3-B pins")
- 128f71fe014f ("pinctrl: rockchip: correct RK3328 iomux width flag for GPIO2-B pins")

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
 drivers/pinctrl/rockchip/pinctrl-rk3328.c | 59 ++++++++++++++++++++---
 1 file changed, 52 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3328.c b/drivers/pinctrl/rockchip/pinctrl-rk3328.c
index 47c2e923a1bb..dd0dc2eff270 100644
--- a/drivers/pinctrl/rockchip/pinctrl-rk3328.c
+++ b/drivers/pinctrl/rockchip/pinctrl-rk3328.c
@@ -14,23 +14,68 @@
 
 static struct rockchip_mux_recalced_data rk3328_mux_recalced_data[] = {
 	{
-		.num = 2,
-		.pin = 12,
-		.reg = 0x24,
-		.bit = 8,
-		.mask = 0x3
-	}, {
+		/* gpio2_b7_sel */
 		.num = 2,
 		.pin = 15,
 		.reg = 0x28,
 		.bit = 0,
 		.mask = 0x7
 	}, {
+		/* gpio2_c7_sel */
 		.num = 2,
 		.pin = 23,
 		.reg = 0x30,
 		.bit = 14,
 		.mask = 0x3
+	}, {
+		/* gpio3_b1_sel */
+		.num = 3,
+		.pin = 9,
+		.reg = 0x44,
+		.bit = 2,
+		.mask = 0x3
+	}, {
+		/* gpio3_b2_sel */
+		.num = 3,
+		.pin = 10,
+		.reg = 0x44,
+		.bit = 4,
+		.mask = 0x3
+	}, {
+		/* gpio3_b3_sel */
+		.num = 3,
+		.pin = 11,
+		.reg = 0x44,
+		.bit = 6,
+		.mask = 0x3
+	}, {
+		/* gpio3_b4_sel */
+		.num = 3,
+		.pin = 12,
+		.reg = 0x44,
+		.bit = 8,
+		.mask = 0x3
+	}, {
+		/* gpio3_b5_sel */
+		.num = 3,
+		.pin = 13,
+		.reg = 0x44,
+		.bit = 10,
+		.mask = 0x3
+	}, {
+		/* gpio3_b6_sel */
+		.num = 3,
+		.pin = 14,
+		.reg = 0x44,
+		.bit = 12,
+		.mask = 0x3
+	}, {
+		/* gpio3_b7_sel */
+		.num = 3,
+		.pin = 15,
+		.reg = 0x44,
+		.bit = 14,
+		.mask = 0x3
 	},
 };
 
@@ -275,7 +320,7 @@ static struct rockchip_pin_bank rk3328_pin_banks[] = {
 	PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0),
 	PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0),
 	PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0,
-			     IOMUX_WIDTH_3BIT,
+			     IOMUX_8WIDTH_2BIT,
 			     IOMUX_WIDTH_3BIT,
 			     0),
 	PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3",
-- 
2.47.1