[PATCH 00/12] rockchip: rk3399: Migrate to use TPL on bob and kevin

[Tom Rini]

On Fri, Jan 10, 2025 at 03:09:33PM +0800, Kever Yang wrote:
> Hi Tom,
> 
> On 2024/12/21 00:29, Tom Rini wrote:
> > On Fri, Dec 20, 2024 at 05:22:28PM +0100, Jonas Karlman wrote:
> > > Hi Simon,
> > > 
> > > On 2024-12-13 04:09, Simon Glass wrote:
> > > > Hi Jonas,
> > > > 
> > > > On Thu, 12 Dec 2024 at 16:57, Jonas Karlman <jonas at kwiboo.se> wrote:
> > > > > This is a continuation of an RFC [1] sent back in August.
> > > > > 
> > > > > All Rockchip aarch64 boards, beside bob and kevin, use TPL to initialize
> > > > > DRAM and SPL to load FIT with U-Boot proper and TF-A.
> > > > > 
> > > > > Bob and kevin currently does not use TPL and instead initialize DRAM
> > > > > in SPL and directly after tries to load a FIT with only U-Boot proper.
> > > > > 
> > > > > This series migrate bob and kevin to also use TPL to uniform TPL/SPL use
> > > > > for all Rockchip aarch64 boards.
> > > > > 
> > > > > Features and changes in this series:
> > > > > - Use of Rockchip aarch64 common bss and stack addresses
> > > > > - SHA256 checksum/signature check of FIT images in SPL
> > > > > - Use of dcache to speed up checksum check in SPL
> > > > > - SDMA use for eMMC access to speed up read/write in U-Boot proper
> > > > > - FIT location moved from 0x40000 to 0xE0000 in SPI flash
> > > > > 
> > > > > Changes sinc RFC:
> > > > > - Include pinctrl props and enable regulators based on DT in SPL
> > > > > - Drop bob and kevin board specific code from common rk3399.c
> > > > > 
> > > > > Please note that I do not have any bob or kevin so this has only been
> > > > > compile tested and the original RFC [1] was runtime tested by Simon.
> > > > > 
> > > > > [1] https://patchwork.ozlabs.org/patch/1967517/
> > > > > 
> > > > > Jonas Karlman (12):
> > > > >    rockchip: rk3399: Fix TPL build of bob and kevin
> > > > >    rockchip: rk3399-gru: Use SYS_SPI_U_BOOT_OFFS value in offset prop
> > > > >    rockchip: rk3399-gru: Move SPI flash payload offset for bob and kevin
> > > > >    rockchip: rk3399-gru: Fix include of TPL in u-boot.rom image
> > > > >    rockchip: rk3399-gru: Use TPL with common bss and stack addresses
> > > > >    rockchip: rk3399-gru: Include binman generated FIT in u-boot.rom image
> > > > >    rockchip: rk3399: Drop common Kconfig options already implied
> > > > >    rockchip: rk3399-gru: Remove unused nodes from xPL control FDT
> > > > >    rockchip: rk3399-gru: Enable dcache and signature validation in SPL
> > > > >    rockchip: rk3399-gru: Use SDMA mode to read from eMMC
> > > > >    rockchip: rk3399-gru: Include pinctrl and regulators in SPL
> > > > >    rockchip: rk3399: Drop unneeded bob and kevin board specific code
> > > > > 
> > > > >   arch/arm/dts/rk3399-gru-u-boot.dtsi    | 29 ++++++++++++++++++++++++--
> > > > >   arch/arm/dts/rk3399-u-boot.dtsi        | 14 +++++++++++--
> > > > >   arch/arm/mach-rockchip/rk3399/Kconfig  | 12 -----------
> > > > >   arch/arm/mach-rockchip/rk3399/rk3399.c | 23 +-------------------
> > > > >   configs/chromebook_bob_defconfig       | 23 ++++++--------------
> > > > >   configs/chromebook_kevin_defconfig     | 23 ++++++--------------
> > > > >   6 files changed, 52 insertions(+), 72 deletions(-)
> > > > Thank you for doing this!
> > > > 
> > > > I'm not sure if you have access to your own denx tree. If so, kevin
> > > > and bob are in the sjg lab. If not, you can sign up at sjg.u-boot.org
> > > > to get access to my tree.
> > > I do not have access to my own tree.
> > > 
> > > > This series eems to work for me, except for the final commit, which
> > > > hangs with no output.
> > > Strange, guess we can just skip the last patch, should I send a v2
> > > without the last patch?
> > > 
> > > I wonder if it is not setting io_vsel or the regulators that is causing
> > > an issue. Setting io_vsel is probably delayed until U-Boot proper
> > > instead of being set very early in SPL (due to no IO-domain driver in
> > > SPL), and enable of regulators may happen later in SPL with the last
> > > patch applied.
> > > 
> > > There is also some code in board/google/gru/gru.c that mention a delay
> > > related to the regulators may be needed, however board_early_init_f() is
> > > never called as following can be found in .config:
> > > 
> > >    # CONFIG_BOARD_EARLY_INIT_F is not set
> > > 
> > > Will you be able to test with just the rk_setreg(&grf->io_vsel, 1 << 0);
> > > and remove the spl_gpio_output/set_pull parts of the last patch before I
> > > send a v2?
> > If you send a v2, please include disabling TPL_BLOBLIST and then the
> > boards should boot in mainline as well as Simon's tree. Thanks!
> Do you mean add below code in configs/chromebook_bob_defconfig and
> configs/chromebook_kevin_defconfig will make this patch set available?
>  # CONFIG_TPL_BLOBLIST is not set
> If yes, then I can do that when apply the patches.

Yes, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20250110/c3f1e9d0/attachment.sig>