[PATCH] usb: ehci-mx6: Add i.MX95 support

[Marek Vasut]

i.MX95 uses the same USB IP as i.MX8MM. It can then reuse the ehci-mx6
driver.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Alice Guo <alice.guo at nxp.com>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Mathieu Othacehe <othacehe at gnu.org>
Cc: Mattijs Korpershoek <mkorpershoek at baylibre.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Tom Rini <trini at konsulko.com>
Cc: u-boot at lists.denx.de
---
 drivers/usb/host/Kconfig | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 24786a2bc91..a656265890e 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -217,14 +217,14 @@ config USB_EHCI_MX6
 	  Enables support for the on-chip EHCI controller on i.MX6 SoCs.
 
 config USB_EHCI_MX7
-	bool "Support for i.MX7 on-chip EHCI USB controller"
-	depends on ARCH_MX7 || IMX8M || IMX93
+	bool "Support for i.MX7/i.MX8M/i.MX9 on-chip EHCI USB controller"
+	depends on ARCH_MX7 || IMX8M || IMX93 || IMX95
 	select EHCI_HCD_INIT_AFTER_RESET if ARCH_MX7
-	select PHY if IMX8M || IMX93
-	select NOP_PHY if IMX8M || IMX93
+	select PHY if IMX8M || IMX93 || IMX95
+	select NOP_PHY if IMX8M || IMX93 || IMX95
 	default y
 	---help---
-	  Enables support for the on-chip EHCI controller on i.MX7 SoCs.
+	  Enables support for the on-chip EHCI controller on i.MX7/i.MX8M/i.MX9 SoCs.
 
 config USB_EHCI_MXS
 	bool "Support for i.MX23/i.MX28 EHCI USB controller"
-- 
2.45.2