[PATCH 11/13] configs: am62p: Add configs for enabling ETHBOOT in R5SPL

[Chintan Vankar]

From: Andreas Dannenberg <dannenberg at ti.com>

Add configs for enabling ETHBOOT in R5SPL.

Signed-off-by: Andreas Dannenberg <dannenberg at ti.com>
Signed-off-by: Chintan Vankar <c-vankar at ti.com>
---
 configs/am62px_evm_r5_ethboot_defconfig | 35 +++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 configs/am62px_evm_r5_ethboot_defconfig

diff --git a/configs/am62px_evm_r5_ethboot_defconfig b/configs/am62px_evm_r5_ethboot_defconfig
new file mode 100644
index 00000000000..d97b2b73680
--- /dev/null
+++ b/configs/am62px_evm_r5_ethboot_defconfig
@@ -0,0 +1,35 @@
+#include<configs/am62px_evm_r5_defconfig>
+
+CONFIG_ARM=y
+CONFIG_ARCH_K3=y
+CONFIG_SOC_K3_AM62P5=y
+CONFIG_TARGET_AM62P5_R5_EVM=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-am62p5-r5-sk"
+CONFIG_SPL_MMC=n
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x300000
+CONFIG_SPL_DMA=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_ETH=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_NET=y
+CONFIG_SPL_NET_VCI_STRING="AM62PX U-Boot R5 SPL"
+CONFIG_CMD_DHCP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
+CONFIG_DM_I2C=y
+CONFIG_PHY_TI_DP83867=y
+CONFIG_TI_AM65_CPSW_NUSS=y
+CONFIG_NET=y
+CONFIG_SPL_SPI=n
+CONFIG_SPL_MTD_LOAD=n
+CONFIG_SPL_NAND_SPI_SUPPORT=n
+CONFIG_SPL_DM_DEVICE_REMOVE=n
+CONFIG_DM_MTD=n
+CONFIG_MTD_SPI_NAND=n
+CONFIG_DM_SPI_FLASH=n
+CONFIG_SPI=n
+CONFIG_DM_SPI=n
+CONFIG_CADENCE_QSPI=n
+CONFIG_SPL_DRIVERS_MISC=y
-- 
2.34.1