[PATCH 5/8] arm64: renesas: Drop unused code and clean up headers on Salvator-X boards

[Marek Vasut]

CONFIG_IS_ENABLED(SYS_I2C_LEGACY) is not set on this board,
remove the code and also remove all unnecessary headers that
are included in this file.

Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
---
Cc: Adam Ford <aford173 at gmail.com>
Cc: Biju Das <biju.das.jz at bp.renesas.com>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
Cc: Paul Barker <paul.barker.ct at bp.renesas.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Tom Rini <trini at konsulko.com>
Cc: u-boot at lists.denx.de
---
 board/renesas/salvator-x/salvator-x.c | 38 +++------------------------
 1 file changed, 4 insertions(+), 34 deletions(-)

diff --git a/board/renesas/salvator-x/salvator-x.c b/board/renesas/salvator-x/salvator-x.c
index b6fb106ca5d..abb17c3fdc5 100644
--- a/board/renesas/salvator-x/salvator-x.c
+++ b/board/renesas/salvator-x/salvator-x.c
@@ -9,41 +9,18 @@
 
 #if !IS_ENABLED(CONFIG_XPL_BUILD)
 
-#include <cpu_func.h>
-#include <image.h>
-#include <init.h>
-#include <malloc.h>
-#include <netdev.h>
-#include <dm.h>
-#include <asm/global_data.h>
-#include <dm/platform_data/serial_sh.h>
-#include <asm/processor.h>
-#include <asm/mach-types.h>
 #include <asm/io.h>
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/renesas.h>
 #include <asm/arch/rcar-mstp.h>
-#include <i2c.h>
-#include <mmc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define DVFS_MSTP926		BIT(26)
-#define HSUSB_MSTP704		BIT(4)	/* HSUSB */
+#include <asm/arch/renesas.h>
+#include <init.h>
 
 int board_early_init_f(void)
 {
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) && defined(CONFIG_SYS_I2C_SH)
-	/* DVFS for reset */
-	mstp_clrbits_le32(SMSTPCR9, SMSTPCR9, DVFS_MSTP926);
-#endif
 	return 0;
 }
 
+#define HSUSB_MSTP704		BIT(4)	/* HSUSB */
+
 /* HSUSB block registers */
 #define HSUSB_REG_LPSTS			0xE6590102
 #define HSUSB_REG_LPSTS_SUSPM_NORMAL	BIT(14)
@@ -67,13 +44,6 @@ int board_init(void)
 	return 0;
 }
 
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) && defined(CONFIG_SYS_I2C_SH)
-void reset_cpu(void)
-{
-	i2c_reg_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x20, 0x80);
-}
-#endif
-
 #ifdef CONFIG_MULTI_DTB_FIT
 int board_fit_config_name_match(const char *name)
 {
-- 
2.45.2