[PATCH 09/13] arm: mach-k3: am62p5_init: Probe AM65 CPSW NUSS for R5/A53 SPL

[Roger Quadros]

On 07/01/2025 11:38, Chintan Vankar wrote:
> In order to support Ethernet boot on AM62p, probe AM65 CPSW NUSS
> driver in board_init_f().
> 
> Signed-off-by: Chintan Vankar <c-vankar at ti.com>
> ---
>  arch/arm/mach-k3/am62px/am62p5_init.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/mach-k3/am62px/am62p5_init.c b/arch/arm/mach-k3/am62px/am62p5_init.c
> index 34ed01cd78c..f8e98b09402 100644
> --- a/arch/arm/mach-k3/am62px/am62p5_init.c
> +++ b/arch/arm/mach-k3/am62px/am62p5_init.c
> @@ -159,6 +159,16 @@ void board_init_f(ulong dummy)
>  	}
>  
>  	spl_enable_cache();
> +
> +	if (IS_ENABLED(CONFIG_SPL_ETH) && IS_ENABLED(CONFIG_TI_AM65_CPSW_NUSS) &&
> +	    spl_boot_device() == BOOT_DEVICE_ETHERNET) {
> +		struct udevice *cpswdev;
> +
> +		if (uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(am65_cpsw_nuss),
> +						&cpswdev))
> +			printf("Failed to probe am65_cpsw_nuss driver\n");
> +	}
> +

Why do you need to do this?

from drivers/net/ti/am65-cpsw-nuss.c

U_BOOT_DRIVER(am65_cpsw_nuss) = {
        .name   = "am65_cpsw_nuss",
        .id     = UCLASS_MISC,
        .of_match = am65_cpsw_nuss_ids,
        .probe  = am65_cpsw_probe_nuss,
        .priv_auto = sizeof(struct am65_cpsw_common),
};

U_BOOT_DRIVER(am65_cpsw_nuss_port) = {
        .name   = "am65_cpsw_nuss_port",
        .id     = UCLASS_ETH,
        .probe  = am65_cpsw_port_probe,
        .ops    = &am65_cpsw_ops,
        .priv_auto      = sizeof(struct am65_cpsw_priv),
        .plat_auto      = sizeof(struct eth_pdata),
        .flags = DM_FLAG_ALLOC_PRIV_DMA | DM_FLAG_OS_PREPARE,
};

Isn't am65_cpsw_port_probe() and am65_cpsw_probe_nuss() getting called?
If not, you need to identify why and fix it the proper way. Not by hacking
it like you do now.

>  	debug("am62px_init: %s done\n", __func__);
>  }
>  

-- 
cheers,
-roger