[PATCH v2 0/6] Add initial support for IPQ9574 based boards

[Varadarajan Narayanan]

These patches introduce the initial support code needed
for the QTI IPQ9574 SoC and RDP433 board.

	SoC	: Qualcomm IPQ9574
	RAM	: 2GB DDR4
	Flash	: eMMC 8GB
	WiFi	: 1 x 2.4GHz, 1 x 5GHz, 1 x 6GHz

Thanks
Varada

v2: Have tried to address the issues raised in v1
    * Use the upstream kernel dts itself
    * Dropped linker script changes
    * Break up the patches in clock, pinctrl and defconfig subsets
    * Dropped ipq9574 specific files and use existing mach-snapdragon
      infrastructure itself
    * Dropped SMEM related changes. Will have them in a separate
      series
    * Use reset_get_by_index instead of reset_get_by_name

v1: https://lore.kernel.org/u-boot/20240226100807.1095607-1-quic_varada@quicinc.com/
Varadarajan Narayanan (6):
  dts: ipq9574-rdp433-u-boot: add override dtsi
  clk/qcom: add initial clock driver for ipq9574
  pinctrl: qcom: Add ipq9574 pinctrl driver
  mmc: msm_sdhci: Reset clocks before reconfiguration
  qcom_defconfig: enable ipq9574 clock & pinctrl driver
  configs: add ipq9574_defconfig

 arch/arm/dts/ipq9574-rdp433-u-boot.dtsi |  19 ++
 configs/ipq9574_defconfig               | 111 ++++++++++++
 configs/qcom_defconfig                  |   2 +
 drivers/clk/qcom/Kconfig                |   8 +
 drivers/clk/qcom/Makefile               |   1 +
 drivers/clk/qcom/clock-ipq9574.c        | 100 +++++++++++
 drivers/clk/qcom/clock-qcom.h           |   1 +
 drivers/mmc/msm_sdhci.c                 |  10 ++
 drivers/pinctrl/qcom/Kconfig            |   7 +
 drivers/pinctrl/qcom/Makefile           |   1 +
 drivers/pinctrl/qcom/pinctrl-ipq9574.c  | 226 ++++++++++++++++++++++++
 11 files changed, 486 insertions(+)
 create mode 100644 arch/arm/dts/ipq9574-rdp433-u-boot.dtsi
 create mode 100644 configs/ipq9574_defconfig
 create mode 100644 drivers/clk/qcom/clock-ipq9574.c
 create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq9574.c


base-commit: a2b489b170f8382f746202c36616eaf2bc38fe86
-- 
2.34.1