[PATCH] riscv: spacemit: k1: probe dram size during boot phase.

[Huan Zhou]

On Wed, Jan 08, 2025 at 12:21:18PM +0100, Heinrich Schuchardt wrote:
> Am 8. Januar 2025 12:11:05 MEZ schrieb Yixun Lan <dlan at gentoo.org>:
> >Hi Huan:
> >
> >On 16:49 Wed 08 Jan     , Huan Zhou wrote:
> >> 
> >> 
> >..
> >> ---
> >remove above "---"? otherwise following commit message will be
> >dropped during patch application..
> >
> >> This patch introduce improvement for get dram size on bananapi BPI-F3,
> >> retrieving the dram size dynamically.
> >> Have tested on bananapi BPIF3 4G and jupiter 8G.
> >> 
> >> Signed-off-by: Huan Zhou <me at per1cycle.org>
> >> ---
> >>  arch/riscv/cpu/k1/dram.c | 40 ++++++++++++++++++++++++++++++++++++++--
> >>  1 file changed, 38 insertions(+), 2 deletions(-)
> >> 
> >> diff --git a/arch/riscv/cpu/k1/dram.c b/arch/riscv/cpu/k1/dram.c
> >> index c477c15cbfb19f0e3a0ee72985b602f5bda352d7..095217f2a4c053f7477d62c0776bcb51e623db47 100644
> >> --- a/arch/riscv/cpu/k1/dram.c
> >> +++ b/arch/riscv/cpu/k1/dram.c
> >> @@ -4,17 +4,53 @@
> >>   */
> >>  
> >>  #include <asm/global_data.h>
> >> +#include <asm/io.h>
> >>  #include <config.h>
> >> +#include <bitfield.h>
> >>  #include <fdt_support.h>
> >>  #include <linux/sizes.h>
> >>  
> >> +#define DDR_BASE 0xC0000000
> >>  DECLARE_GLOBAL_DATA_PTR;
> >>  
> >> +static inline u32 map_format_size(u32 val)
> >> +{
> >> +	u32 tmp;
> >> +
> >> +	if (val & 0x1 == 0)
> >please add brackets explicitly, something like
> >	if ((val & 0x1) == 0)
> 
> We tend to avoid == 0 in U-Boot
ok, got it.
> 
> if (val & BIT(0))
> 
> >
> >> +		return 0;
> >> +
> >> +	tmp = bitfield_extract(val, 16, 5);
> >> +	switch (tmp) {
> >> +	case 0xd:
> >> +		return 512;
> >> +	case 0xe:
> >> +		return 1024;
> >> +	case 0xf:
> >> +		return 2048;
> >> +	case 0x10:
> >> +		return 4096;
> >> +	case 0x11:
> >> +		return 8192;
> >> +	default:
> >> +		pr_info("Invalid DRAM density %x\n", val);
> >> +		return 0;
> >> +	}
> >> +}
> >> +
> >> +u32 ddr_get_density(void)
> >> +{
> >> +	u32 cs0_size = map_format_size(readl((void *)DDR_BASE + 0x200));
> >> +	u32 cs1_size = map_format_size(readl((void *)DDR_BASE + 0x208));
> >> +	u32 ddr_size = cs0_size + cs1_size;
> >> +
> >> +	return ddr_size;
> >> +}
> >> +
> >>  int dram_init(void)
> >>  {
> >>  	gd->ram_base = CFG_SYS_SDRAM_BASE;
> >> -	/* TODO get ram size from ddr controller */
> >> -	gd->ram_size = SZ_4G;
> >> +	gd->ram_size = (u64)ddr_get_density() * SZ_1M;
> 
> This is C and not C++. We don't need a cast to assign here.
> 
ok, will fixed and retested, links to test log will be added too.
> Best regards
> 
> Heinrich
> 
> >while using cast, why not define ddr_get_density() return as same type?
> >also it's more reasonable to use phys_size_t as I checked gd_t
> >
> >>  	return 0;
> >>  }
> >>  
> >> 
> >> ---
> >> base-commit: 19fc0b7f7d907119a13e9c207991899f0817f8fc
> >> change-id: 20250108-get-dram-size-65cf59a15201
> >> 
> >> Best regards,
> >> -- 
> >> Huan Zhou <me at per1cycle.org>
> >> 
> >
>