[PATCH 2/2] usb: ehci-mx6: Use regulator_set_enable_if_allowed

[Marek Vasut]

With the commit 4fcba5d556b4 ("regulator: implement basic reference
counter") the return value of regulator_set_enable may be EALREADY or
EBUSY for fixed/gpio regulators.

Change to use the more relaxed regulator_set_enable_if_allowed to
continue if regulator already was enabled or disabled.

Based on 335799b7252a ("usb: dwc2: Use regulator_set_enable_if_allowed")

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Alice Guo <alice.guo at nxp.com>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Mathieu Othacehe <othacehe at gnu.org>
Cc: Mattijs Korpershoek <mkorpershoek at baylibre.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Tom Rini <trini at konsulko.com>
Cc: u-boot at lists.denx.de
---
 drivers/usb/host/ehci-mx6.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index a93fa5d5455..a8748cef7ad 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -479,9 +479,9 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev)
 #if CONFIG_IS_ENABLED(DM_REGULATOR)
 	if (priv->vbus_supply) {
 		int ret;
-		ret = regulator_set_enable(priv->vbus_supply,
-					   (type == USB_INIT_DEVICE) ?
-					   false : true);
+		ret = regulator_set_enable_if_allowed(priv->vbus_supply,
+						      (type == USB_INIT_DEVICE) ?
+						      false : true);
 		if (ret && ret != -ENOSYS) {
 			printf("Error enabling VBUS supply (ret=%i)\n", ret);
 			return ret;
-- 
2.45.2