[PATCH 2/6] km: Kconfig: set KM_RESERVED_PRAM to zero for all designs

[Tom Rini]

On Mon, Jul 14, 2025 at 02:57:41PM +0000, Holger Brunck wrote:
> > On Mon, Jul 14, 2025 at 03:22:17PM +0200, Holger Brunck wrote:
> > 
> > > This area was used for special purposes on kirkwood. On the current
> > > designs we don't need this anymore.
> > >
> > > Signed-off-by: Holger Brunck <holger.brunck at hitachienergy.com>
> > > ---
> > >  board/keymile/Kconfig | 3 +--
> > >  1 file changed, 1 insertion(+), 2 deletions(-)
> > >
> > > diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig index
> > > 41458813858..3a66b2915ac 100644
> > > --- a/board/keymile/Kconfig
> > > +++ b/board/keymile/Kconfig
> > > @@ -31,8 +31,7 @@ config KM_PHRAM
> > >
> > >  config KM_RESERVED_PRAM
> > >  	hex "Reserved RAM"
> > > -	default 0x0 if MPC83xx
> > > -	default 0x1000 if MPC85xx || ARCH_LS1021A
> > > +	default 0x0
> > >  	depends on !ARCH_SOCFPGA
> > >  	help
> > >  	  Reserved physical RAM area at the end of memory for special
> > purposes.
> > 
> > Can the whole thing be removed then? Thanks.
> > 
> 
> Good point, I can drop it completely. Should I send a v2 for the whole series
> then or only for this one?

Assuming there's no conflicts, v2 of just this patch is fine.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20250714/dccc9ace/attachment-0001.sig>