[PATCH v3 15/23] net: ravb: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks

[Marek Vasut]

On 2/28/25 2:28 PM, Paul Barker wrote:
> On 22/02/2025 20:33, Marek Vasut wrote:
>> Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks
>> currently listed in bb_miiphy_buses[] array. This is a temporary
>> duplication of assignment to avoid breakage, which will be removed
>> in follow up patches. At this point, the bb_miiphy callbacks can
>> reach these accessors by doing container_of() on struct mii_dev.
>>
>> Reviewed-by: Paul Barker <paul.barker.ct at bp.renesas.com>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
>> ---
>> Cc: Christian Marangi <ansuelsmth at gmail.com>
>> Cc: Ilias Apalodimas <ilias.apalodimas at linaro.org>
>> Cc: Jerome Forissier <jerome.forissier at linaro.org>
>> Cc: Jim Liu <JJLIU0 at nuvoton.com>
>> Cc: Joe Hershberger <joe.hershberger at ni.com>
>> Cc: Mario Six <mario.six at gdsys.cc>
>> Cc: Michal Simek <michal.simek at amd.com>
>> Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
>> Cc: Paul Barker <paul.barker.ct at bp.renesas.com>
>> Cc: Ramon Fried <rfried.dev at gmail.com>
>> Cc: Simon Glass <sjg at chromium.org>
>> Cc: Sughosh Ganu <sughosh.ganu at linaro.org>
>> Cc: Tom Rini <trini at konsulko.com>
>> Cc: u-boot at lists.denx.de
>> ---
>> V2: No change
>> V3: Add RB from Paul
>> ---
>>   drivers/net/ravb.c | 19 ++++++++++++++++---
>>   1 file changed, 16 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/net/ravb.c b/drivers/net/ravb.c
>> index 381cf250ea2..0018b694ec1 100644
>> --- a/drivers/net/ravb.c
>> +++ b/drivers/net/ravb.c
>> @@ -553,6 +553,7 @@ static int ravb_probe(struct udevice *dev)
>>   {
>>   	struct eth_pdata *pdata = dev_get_plat(dev);
>>   	struct ravb_priv *eth = dev_get_priv(dev);
>> +	struct bb_miiphy_bus *bb_miiphy;
>>   	struct mii_dev *mdiodev;
>>   	void __iomem *iobase;
>>   	int ret;
>> @@ -564,17 +565,29 @@ static int ravb_probe(struct udevice *dev)
>>   	if (ret < 0)
>>   		goto err_mdio_alloc;
>>   
>> -	mdiodev = mdio_alloc();
>> -	if (!mdiodev) {
>> +	bb_miiphy = bb_miiphy_alloc();
>> +	if (!bb_miiphy) {
>>   		ret = -ENOMEM;
>>   		goto err_mdio_alloc;
>>   	}
>>   
>> +	mdiodev = &bb_miiphy->mii;
>> +
>>   	mdiodev->read = bb_miiphy_read;
>>   	mdiodev->write = bb_miiphy_write;
>>   	bb_miiphy_buses[0].priv = eth;
>>   	snprintf(mdiodev->name, sizeof(mdiodev->name), dev->name);
>>   
>> +	/* Copy the bus accessors, name and private data */
>> +	bb_miiphy->mdio_active = ravb_bb_mdio_active;
>> +	bb_miiphy->mdio_tristate = ravb_bb_mdio_tristate;
>> +	bb_miiphy->set_mdio = ravb_bb_set_mdio;
>> +	bb_miiphy->get_mdio = ravb_bb_get_mdio;
>> +	bb_miiphy->set_mdc = ravb_bb_set_mdc;
>> +	bb_miiphy->delay = ravb_bb_delay;
>> +	strlcpy(bb_miiphy->name, "ravb", MDIO_NAME_LEN);
>> +	bb_miiphy->priv = eth;
>> +
>>   	ret = mdio_register(mdiodev);
>>   	if (ret < 0)
>>   		goto err_mdio_register;
>> @@ -599,7 +612,7 @@ static int ravb_probe(struct udevice *dev)
>>   err_mdio_reset:
>>   	clk_release_bulk(&eth->clks);
>>   err_mdio_register:
>> -	mdio_free(mdiodev);
>> +	bb_miiphy_free(bb_miiphy);
>>   err_mdio_alloc:
>>   	unmap_physmem(eth->iobase, MAP_NOCACHE);
>>   	return ret;
> 
> Marek,
> 
> I've rebased my RZ/G2L Ethernet patches on top of this series and as
> part of tidying things up I spotted an issue that I'd missed -
> ravb_remove() still calls mdio_free(eth->bus). The error paths in the
> probe functions have been converted but the remove functions were
> missed. It should instead use something like:
> 
>      struct bb_miiphy_bus *bus = container_of(eth->bus, struct bb_miiphy_bus, mii);
>      bb_miiphy_free(bus);
> 
> The same applies to the following two patches (sh_eth.c & designware.c).
This should be fixed in

[PATCH 01/11] net: miiphybb: Split off struct bb_miiphy_bus_ops