March 2025 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Mar 1 01:59:14 CET 2025
Ending: Mon Mar 31 23:28:34 CEST 2025
Messages: 3089

• 回复: [PATCH v6 02/20] firmware: scmi: smt: Interrupt communication enable   Alice Guo (OSS)
• [PATCH v1] mailbox: add i.MX Messaging Unit (MU) driver   Alice Guo (OSS)
• 回复: [PATCH v6 03/20] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Alice Guo (OSS)
• 回复: 回复: 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Alice Guo (OSS)
• 回复: [PATCH v6 01/20] mailbox: add i.MX Messaging Unit (MU) driver   Alice Guo (OSS)
• 回复: [PATCH v6 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Alice Guo (OSS)
• 回复: [EXT] Re: [PATCH v4 10/20] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Alice Guo (OSS)
• 回复: [PATCH v6 10/20] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Alice Guo (OSS)
• 回复: [PATCH v1] mailbox: add i.MX Messaging Unit (MU) driver   Alice Guo (OSS)
• 回复: 回复: [PATCH v1] mailbox: add i.MX Messaging Unit (MU) driver   Alice Guo (OSS)
• [PATCH v2] mailbox: add i.MX Messaging Unit (MU) driver   Alice Guo (OSS)
• 回复: 回复: [PATCH v6 02/20] firmware: scmi: smt: Interrupt communication enable   Alice Guo (OSS)
• 回复: 回复: [EXT] Re: [PATCH v4 10/20] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Alice Guo (OSS)
• [PATCH v7 00/19] imx: add i.MX95 support   Alice Guo (OSS)
• [PATCH v7 01/19] firmware: scmi: smt: Interrupt communication enable   Alice Guo (OSS)
• [PATCH v7 02/19] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Alice Guo (OSS)
• [PATCH v7 03/19] firmware: scmi_agent: add SCMI pin control protocol support   Alice Guo (OSS)
• [PATCH v7 04/19] scmi_protocols: add SCMI misc protocol protocol_id and message_id for getting the ROM passover data   Alice Guo (OSS)
• [PATCH v7 05/19] scmi_protocols: add SCMI Performance domain management protocol message IDs   Alice Guo (OSS)
• [PATCH v7 06/19] clk: scmi: add the command CLOCK_PARENT_SET   Alice Guo (OSS)
• [PATCH v7 07/19] clk: scmi: check the clock state/parent/rate control permissions   Alice Guo (OSS)
• [PATCH v7 09/19] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Alice Guo (OSS)
• [PATCH v7 10/19] imx9: scmi: add i.MX95 SoC and clock related code   Alice Guo (OSS)
• [PATCH v7 11/19] spl: imx: use trampoline buffer to load images to secure region   Alice Guo (OSS)
• [PATCH v7 12/19] imx9: add i.MX95 Kconfig and Makefile   Alice Guo (OSS)
• [PATCH v7 13/19] imx: Kconfig: IMX8_ROMAPI is not configured for i.MX95   Alice Guo (OSS)
• [PATCH v7 14/19] binman: add a new entry type for packing DDR PHY firmware images   Alice Guo (OSS)
• [PATCH v7 15/19] tools: imx8image: add i.MX95 support   Alice Guo (OSS)
• [PATCH v7 16/19] imx: add V2X container support on i.MX95   Alice Guo (OSS)
• [PATCH v7 17/19] doc: imx: add document for i.MX95 Image Container Format   Alice Guo (OSS)
• [PATCH v7 18/19] imx95_evk: add i.MX95 19x19 EVK board basic support   Alice Guo (OSS)
• 回复: 回复: 回复: 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Alice Guo (OSS)
• 回复: [PATCH v2] mailbox: add i.MX Messaging Unit (MU) driver   Alice Guo (OSS)
• 回复: 回复: 回复: 回复: 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Alice Guo (OSS)
• [PATCH v8 00/19] imx: add i.MX95 support   Alice Guo (OSS)
• [PATCH v8 01/19] firmware: scmi: smt: Interrupt communication enable   Alice Guo (OSS)
• [PATCH v8 02/19] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Alice Guo (OSS)
• [PATCH v8 03/19] firmware: scmi_agent: add SCMI pin control protocol support   Alice Guo (OSS)
• [PATCH v8 04/19] scmi_protocols: add SCMI misc protocol protocol_id and message_id for getting the ROM passover data   Alice Guo (OSS)
• [PATCH v8 05/19] scmi_protocols: add SCMI Performance domain management protocol message IDs   Alice Guo (OSS)
• [PATCH v8 06/19] clk: scmi: add the command CLOCK_PARENT_SET   Alice Guo (OSS)
• [PATCH v8 07/19] clk: scmi: check the clock state/parent/rate control permissions   Alice Guo (OSS)
• [PATCH v8 08/19] sandbox: add SCMI clock control permissions to sandbox   Alice Guo (OSS)
• [PATCH v8 09/19] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Alice Guo (OSS)
• [PATCH v8 10/19] imx9: scmi: add i.MX95 SoC and clock related code   Alice Guo (OSS)
• [PATCH v8 11/19] spl: imx: use trampoline buffer to load images to secure region   Alice Guo (OSS)
• [PATCH v8 12/19] imx9: add i.MX95 Kconfig and Makefile   Alice Guo (OSS)
• [PATCH v8 13/19] imx: Kconfig: IMX8_ROMAPI is not configured for i.MX95   Alice Guo (OSS)
• [PATCH v8 14/19] binman: add a new entry type for packing DDR PHY firmware images   Alice Guo (OSS)
• [PATCH v8 15/19] tools: imx8image: add i.MX95 support   Alice Guo (OSS)
• [PATCH v8 16/19] imx: container: add V2X container support for i.MX95   Alice Guo (OSS)
• [PATCH v8 17/19] doc: imx: add document for i.MX95 Image Container Format   Alice Guo (OSS)
• [PATCH v8 18/19] imx95_evk: add i.MX95 19x19 EVK board basic support   Alice Guo (OSS)
• [PATCH v8 19/19] Makefile: add some files to CLEAN_FILES   Alice Guo (OSS)
• 回复: [PATCH v7 10/19] imx9: scmi: add i.MX95 SoC and clock related code   Alice Guo (OSS)
• 回复: 回复: 回复: 回复: 回复: 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Alice Guo (OSS)
• 回复: [PATCH v8 07/19] clk: scmi: check the clock state/parent/rate control permissions   Alice Guo (OSS)
• Problem with UART in U-Boot.   .
• [PATCH] armv8: start.S: Subordinate CPUs psci setup vector   0.0
• [RFC PATCH] UFS: Remove the timeout while send command   Abbarapu, Venkatesh
• Reading QSPI on zynq7 broken since commit 9bb02f7f4533   Abbarapu, Venkatesh
• [PATCH v2] spi: cadence_ospi: Add device reset via OSPI controller   Venkatesh Yadav Abbarapu
• [PATCH] mtd: spi-nor: Add NO_CHIP_ERASE flag for mt35xu01g/2g   Venkatesh Yadav Abbarapu
• eMMC and UFS   Alexandra
• [PATCH 2/2] mtd: spi-nor-core: Rework spansion_sr_ready() for parallel memories support   Tudor Ambarus
• undefined reference to `__stack_chk_guard' when building with sandbox_defconfig   McLaughlin Amy
• Invalid SPDX License Identifier for test/lib/strlcat.c   Sean Anderson
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Leonard Anderweit
• [PATCH 4/5] net: lwip: add support for built-in root certificates   Ilias Apalodimas
• [PATCH v4 0/6] Fix page permission on arm64 architectures   Ilias Apalodimas
• [PATCH v4 1/6] meminfo: add memory details for armv8   Ilias Apalodimas
• [PATCH v4 2/6] doc: update meminfo with arch specific information   Ilias Apalodimas
• [PATCH v4 3/6] arm: Prepare linker scripts for memory permissions   Ilias Apalodimas
• [PATCH v4 4/6] arm64: mmu_change_region_attr() add an option not to break PTEs   Ilias Apalodimas
• [PATCH v4 5/6] treewide: Add a function to change page permissions   Ilias Apalodimas
• [PATCH v4 6/6] arm64: Enable RW, RX and RO mappings for the relocated binary   Ilias Apalodimas
• [PATCH] lib: correct description of CONFIG_SYS_FDT_PAD   Ilias Apalodimas
• [PATCH 5/5] arm: use type jmp_buf instead of struct jmp_buf_data   Ilias Apalodimas
• [PATCH 4/5] efi_loader: Clean up usage of structure jmp_buf_data   Ilias Apalodimas
• [PATCH 00/17] Various toolchain compatibility fixes/improvements   Ilias Apalodimas
• [PATCH 2/2] net: lwip: add CONFIG_LWIP_DEBUG_RXTX   Ilias Apalodimas
• [PATCH 1/2] net: lwip: rename linkoutput() as net_lwip_tx()   Ilias Apalodimas
• [PATCH v3 13/14] test: cmd: add test for spawn and wait commands   Ilias Apalodimas
• [PATCH 03/17] arm: Add __aeabi_memclr in eabi_compat   Ilias Apalodimas
• [PATCH 02/17] arm: Exclude eabi_compat from LTO   Ilias Apalodimas
• [PATCH 04/17] arm: Add aligned-memory aliases to eabi_compat   Ilias Apalodimas
• [PATCH v6 6/6] blkmap: pass information on ISO image to the OS   Ilias Apalodimas
• [PATCH v2 1/6] net: lwip: extend wget to support CA (root) certificates   Ilias Apalodimas
• [PATCH v2 1/6] net: lwip: extend wget to support CA (root) certificates   Ilias Apalodimas
• [PATCH v2 4/6] net: lwip: add support for built-in root certificates   Ilias Apalodimas
• [PATCH v2 5/6] doc: cmd: wget: document cacert subcommand   Ilias Apalodimas
• [PATCH v2 1/6] net: lwip: extend wget to support CA (root) certificates   Ilias Apalodimas
• [PATCH v2 4/6] net: lwip: add support for built-in root certificates   Ilias Apalodimas
• [PATCH v2 4/6] net: lwip: add support for built-in root certificates   Ilias Apalodimas
• [PATCH v2 4/6] net: lwip: add support for built-in root certificates   Ilias Apalodimas
• [PATCH v2 4/6] net: lwip: add support for built-in root certificates   Ilias Apalodimas
• boottime->efi_allocate_pages() returning EFI_NOT_FOUND   Ilias Apalodimas
• [PATCH v3 14/14] MAINTAINERS: add UTHREAD   Ilias Apalodimas
• [PATCH 2/5] arm: include asm-generic/int-ll64.h in setjmp.h   Ilias Apalodimas
• [PATCH v7 1/8] efi_loader: remove unused code from copy_fdt()   Ilias Apalodimas
• [PATCH v7 2/8] efi_loader: install device-tree on configuration table on every invocation   Ilias Apalodimas
• [PATCH v2 1/1] cmd: simplify eficonfig_init()   Ilias Apalodimas
• [PATCH 06/10] test/py: Rework test_eficonfig to not use virt-make-fs   Ilias Apalodimas
• [PATCH 08/10] test/py: Rework test_efi_secboot to not use virt-make-fs   Ilias Apalodimas
• [PATCH 07/10] test/py: Rework test_efi_capsule to not use virt-make-fs   Ilias Apalodimas
• [PATCH v3 06/14] uthread: add cooperative multi-tasking interface   Ilias Apalodimas
• [PATCH 13/17] makefile: Add `norelro` linker option   Ilias Apalodimas
• [PATCH 1/1] tpm: fixed the nv_define_space command in TPMv2   Ilias Apalodimas
• [PATCH v4 4/6] arm64: mmu_change_region_attr() add an option not to break PTEs   Ilias Apalodimas
• [PATCH v4 2/3] efi_firmware: set EFI capsule dfu_alt_info env explicitly   Ilias Apalodimas
• [PATCH v8 4/8] efi_loader: add a function to remove memory from the EFI map   Ilias Apalodimas
• boottime->efi_allocate_pages() returning EFI_NOT_FOUND   Ilias Apalodimas
• [PATCH] lmb: change the return code on lmb_alloc_addr()   Ilias Apalodimas
• [PATCH] net: lwip: do_ping() should return CMD_RET_FAILURE when no device   Ilias Apalodimas
• Pull request for mmu-next-14032025   Ilias Apalodimas
• [PATCH] lmb: change the return code on lmb_alloc_addr()   Ilias Apalodimas
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Ilias Apalodimas
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Ilias Apalodimas
• [RFC PATCH] Gitlab CI: Clean up more   Ilias Apalodimas
• [PATCH v4 02/14] arm: add initjmp()   Ilias Apalodimas
• [PATCH v4 08/14] lib: time: hook uthread_schedule() into udelay()   Ilias Apalodimas
• [PATCH v4 12/14] cmd: add spawn and wait commands   Ilias Apalodimas
• [PATCH] arm64: Fix page permissions for platforms running at EL2   Ilias Apalodimas
• [PATCH 0/3] Add initrd support to bootm EFI payloads   Ilias Apalodimas
• [PATCH 1/3] efi_loader: efi_load_initrd: provide a memory mapped initrd   Ilias Apalodimas
• [PATCH 2/3] efi_loader: binary_run: register an initrd   Ilias Apalodimas
• [PATCH 0/3] Add initrd support to bootm EFI payloads   Ilias Apalodimas
• [PATCH 2/3] efi_loader: binary_run: register an initrd   Ilias Apalodimas
• [PATCH] arm64: Fix page permissions for platforms running at EL2   Ilias Apalodimas
• [PATCH 2/3] efi_loader: binary_run: register an initrd   Ilias Apalodimas
• [PATCH] net: remove commented out line   Ilias Apalodimas
• [PATCH v1] efi_loader: Handle GD_FLG_SKIP_RELOC   Ilias Apalodimas
• [PATCH 1/5] acpi: new function acpi_update_checksum()   Ilias Apalodimas
• [PATCH 2/5] acpi: simplify updating header checksum   Ilias Apalodimas
• [PATCH 4/5] qemu-sbsa: simplify updating ACPI table header checksum   Ilias Apalodimas
• [PATCH 5/5] arm: simplify updating ACPI table header checksum   Ilias Apalodimas
• [PATCH] efi_loader: fix ipv4 device path node conversion   Ilias Apalodimas
• [PATCH v9 3/8] fdt: add support for adding pmem nodes   Ilias Apalodimas
• [PATCH v9 2/8] efi_loader: install device-tree on configuration table on every invocation   Ilias Apalodimas
• [PATCH] net: lwip: Remove error print on failed tx   Ilias Apalodimas
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Ilias Apalodimas
• [PATCH v9 2/8] efi_loader: install device-tree on configuration table on every invocation   Ilias Apalodimas
• Pull request for efi-master-26032025 urgent   Ilias Apalodimas
• Pull request for efi-next-26032025   Ilias Apalodimas
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Ilias Apalodimas
• [PATCH v1] efi_loader: Handle GD_FLG_SKIP_RELOC   Ilias Apalodimas
• [PATCH 1/2] bloblist: fix the overriding of fdt from bloblist   Ilias Apalodimas
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Ilias Apalodimas
• [PATCH] qcom_defconfig: enable OF_UPSTREAM_BUILD_VENDOR   Ilias Apalodimas
• [PATCH v2 1/3] efi_loader: efi_load_initrd: provide a memory mapped initrd   Ilias Apalodimas
• [PATCH 3/3] bootm: add support for initrd in do_bootm_efi   Ilias Apalodimas
• [PATCH v2 3/3] bootm: add support for initrd in do_bootm_efi   Ilias Apalodimas
• [PATCH v2 2/3] efi_loader: binary_run: register an initrd   Ilias Apalodimas
• [PATCH] mach-snapdragon: always select SYSRESET_PSCI for ARCH_SNAPDRAGON   Ilias Apalodimas
• [PATCH] efi_loader: Print extra information from the bootmgr   Ilias Apalodimas
• [PATCH v1] efi_loader: Handle GD_FLG_SKIP_RELOC   Ilias Apalodimas
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Ilias Apalodimas
• [PATCH v1] efi_loader: Handle GD_FLG_SKIP_RELOC   Ilias Apalodimas
• [PATCH v2 06/15] arm: Replace 'adrl' in EFI crt0   Ilias Apalodimas
• [PATCH v2 08/15] makefile: Avoid objcopy --gap-fill for .hex/.srec   Ilias Apalodimas
• [PATCH v2 05/15] arm: Discard unwanted sections in linker script   Ilias Apalodimas
• [PATCH 4/4] qcom_defconfig: enable capsule update support   Ilias Apalodimas
• [PATCH 3/4] dfu: scsi: don't call scsi_scan()   Ilias Apalodimas
• [PATCH 2/2] power: regulator: add qcom-usb-vbus   Neil Armstrong
• [PATCH] pci: dw_common: Set INCREASE_REGION_SIZE flag based on limit address   Neil Armstrong
• [PATCH 1/3] clk/qcom: bubble up qcom_gate_clk_en() errors   Neil Armstrong
• [PATCH 2/3] clk/qcom: sc7280: add some debug data   Neil Armstrong
• [PATCH 3/3] clk/qcom: sc7280: add GENI, PCIe, and more USB clocks   Neil Armstrong
• [PATCH 1/3] i2c: geni: fix error message wording in clk_disable   Neil Armstrong
• [PATCH 2/3] misc: introduce Qcom GENI wrapper   Neil Armstrong
• [PATCH 3/3] i2c: geni: load firmware if required   Neil Armstrong
• [PATCH 1/2] clk/stub: add sc7280-rpmh clock   Neil Armstrong
• [PATCH 2/2] clk/qcom: sc7280: add missing UFS and MMC clocks   Neil Armstrong
• [PATCH v2 0/6] ufs: core: initial cleanup and defines sync with Linux v6.12   Neil Armstrong
• [GIT PULL] Please pull u-boot-amlogic-20250318 into next   Neil Armstrong
• [GIT PULL] Please pull u-boot-ufs-next-20250318   Neil Armstrong
• [PATCH] clk/qcom: sdm845: add missing USB3 clocks   Neil Armstrong
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Neil Armstrong
• [PATCH] usb: dwc3: gadget: Fix excepts/expects typo   Neil Armstrong
• [PATCH 2/4] clk/qcom: sdm845: add GCC_AGGRE_UFS_PHY_AXI_CLK   Neil Armstrong
• [PATCH 1/4] clk/stub: add sdm845 rpmh clock   Neil Armstrong
• [PATCH 4/4] qcom_defconfig: enable fastboot   Neil Armstrong
• [PATCH 1/3] scsi: fix typo in setup_read_ext()   Neil Armstrong
• [PATCH 3/3] scsi: sync cache on write   Neil Armstrong
• [PATCH 2/3] scsi: de-dup calls to scsi_setup_write_ext()   Neil Armstrong
• [PATCH v2 1/3] scsi: fix typo in setup_read_ext()   Neil Armstrong
• [PATCH v2 2/3] scsi: sync cache on write   Neil Armstrong
• [PATCH v2 3/3] ata: ahci: implement SCSI_SYNC_CACHE   Neil Armstrong
• [PATCH] part_efi: cache last scanned GPT for next partition   Neil Armstrong
• [PATCH 0/4] spmi: msm: fix pid mapping for v5 & v7 controllers   Neil Armstrong
• [PATCH 1/4] spmi: msm: use real number of channels for v5 & v7   Neil Armstrong
• [PATCH 2/4] spmi: msm: factor out channel mapping for v5 & v7   Neil Armstrong
• [PATCH 3/4] spmi: msm: introduce SPMI_CHANNEL_VALID flag   Neil Armstrong
• [PATCH 4/4] spmi: msm: correctly handle multiple mapping entries   Neil Armstrong
• [PATCH] part_efi: cache last scanned GPT for next partition   Neil Armstrong
• [PATCH 1/4] mach-snapdragon: track boot source   Neil Armstrong
• [PATCH 3/4] dfu: scsi: don't call scsi_scan()   Neil Armstrong
• [PATCH 01/11] net: miiphybb: Split off struct bb_miiphy_bus_ops   Paul Barker
• [PATCH 01/11] net: miiphybb: Split off struct bb_miiphy_bus_ops   Paul Barker
• [PATCH 01/11] net: miiphybb: Split off struct bb_miiphy_bus_ops   Paul Barker
• [PATCH 02/11] net: miiphybb: Wrap driver side bb_miiphy_read/write() accessors   Paul Barker
• [PATCH 03/11] net: miiphybb: Pass struct bb_miiphy_bus_ops directly to bb_miiphy_read/write()   Paul Barker
• [PATCH 04/11] net: miiphybb: Pass struct mii_dev directly to bb_miiphy_read/write()   Paul Barker
• [PATCH 05/11] net: miiphybb: Drop priv from struct bb_miiphy_bus   Paul Barker
• [PATCH 06/11] net: designware: Switch back to mdio_alloc()   Paul Barker
• [PATCH 07/11] net: ravb: Switch back to mdio_alloc()   Paul Barker
• [PATCH 08/11] net: sh_eth: Switch back to mdio_alloc()   Paul Barker
• [PATCH 09/11] arm: mvebu: a38x: Switch back to mdio_alloc()   Paul Barker
• [PATCH 10/11] net: miiphybb: Drop bb_miiphy_alloc()/bb_miiphy_free() and struct bb_miiphy_bus   Paul Barker
• [PATCH 11/11] net: miiphybb: Drop mdio_init()   Paul Barker
• [PATCH 0/5] Add support for RZ/G2L USB interface   Paul Barker
• [PATCH 1/5] reset: rzg2l-usbphy-ctrl: Add new driver   Paul Barker
• [PATCH 2/5] regulator: rzg2l-usbphy: Add new driver   Paul Barker
• [PATCH 3/5] reset: rzg2l-usbphy-ctrl: Connect up vbus regulator   Paul Barker
• [PATCH 4/5] phy: rcar: Support RZ/G2L USB PHY   Paul Barker
• [PATCH 5/5] renesas_rzg2l_smarc_defconfig: Enable USB support   Paul Barker
• [PATCH] clk: rzg2l: Ignore disable for core clocks   Paul Barker
• [PATCH 0/3] ravb driver fixes   Paul Barker
• [PATCH 1/3] net: ravb: Add dependency on CONFIG_BITBANGMII   Paul Barker
• [PATCH 2/3] net: ravb: Fix RX frame size limit   Paul Barker
• [PATCH 3/3] net: ravb: Fix error handling in ravb_probe   Paul Barker
• [PATCH 1/5] reset: rzg2l-usbphy-ctrl: Add new driver   Paul Barker
• [PATCH 3/3] net: ravb: Fix error handling in ravb_probe   Paul Barker
• [PATCH 2/3] net: ravb: Fix RX frame size limit   Paul Barker
• [PATCH] cmd: Kconfig: Fix submenu for network commands   Paul Barker
• [PATCH] net: miiphybb: Update documentation   Paul Barker
• [PATCH 1/5] reset: rzg2l-usbphy-ctrl: Add new driver   Paul Barker
• [PATCH 1/5] reset: rzg2l-usbphy-ctrl: Add new driver   Paul Barker
• [PATCH v2 0/5] Add support for RZ/G2L USB interface   Paul Barker
• [PATCH v2 1/5] reset: rzg2l-usbphy-ctrl: Add new driver   Paul Barker
• [PATCH v2 2/5] regulator: rzg2l-usbphy: Add new driver   Paul Barker
• [PATCH v2 3/5] reset: rzg2l-usbphy-ctrl: Connect up vbus regulator   Paul Barker
• [PATCH v2 4/5] phy: rcar: Support RZ/G2L USB PHY   Paul Barker
• [PATCH v2 5/5] renesas_rzg2l_smarc_defconfig: Enable USB support   Paul Barker
• [PATCH v2 0/4] Add support for Ethernet interfaces on RZ/G2L   Paul Barker
• [PATCH v2 1/4] net: ravb: Refactor out R-Car specific code   Paul Barker
• [PATCH v2 2/4] net: ravb: Add optional reset deassertion   Paul Barker
• [PATCH v2 3/4] net: ravb: Add RZ/G2L Support   Paul Barker
• [PATCH v2 4/4] renesas_rzg2l_smarc_defconfig: Enable networking support   Paul Barker
• [PATCH v2 2/4] net: ravb: Add optional reset deassertion   Paul Barker
• [PATCH v2 3/4] net: ravb: Add RZ/G2L Support   Paul Barker
• [PATCH] xilinx: Remove tftp block size 4096   Padmarao Begari
• [PATCH v2] xilinx: Remove tftp block size 4096   Padmarao Begari
• [PATCH] video: ti: am335x: Fix tilcdc clock names.   Sukrut Bellary
• [PATCH 0/3] Add support for eCAP PWM and LCD   Sukrut Bellary
• [PATCH 1/3] pwm: ti: am33xx: Enable Auxiliary PWM using eCAP   Sukrut Bellary
• [PATCH 2/3] board: ti: am335x: Enable eCAP0 PWM and LCD pin muxing   Sukrut Bellary
• [PATCH 3/3] arm: dts: am335x: Add nodes for lcdc, panel and backlight   Sukrut Bellary
• [PATCH 3/3] arm: dts: am335x: Add nodes for lcdc, panel and backlight   Sukrut Bellary
• boottime->efi_allocate_pages() returning EFI_NOT_FOUND   Ard Biesheuvel
• [PATCH 0/6] Support NT35510 panel controller on stm32f769i-disco board   Dario Binacchi
• [PATCH 1/6] ARM: dts: stm32: add DSI support on stm32f769   Dario Binacchi
• [PATCH 2/6] ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco   Dario Binacchi
• [PATCH 3/6] ARM: dts: stm32: add display support on stm32f769-disco   Dario Binacchi
• [PATCH 4/6] ARM: dts: add stm32f769-disco-mb1166-reva09   Dario Binacchi
• [PATCH 5/6] video: support FRIDA FRD400B25025-A-CTK   Dario Binacchi
• [PATCH 6/6] board: stm32f769-disco: support FRD400B25025-A-CTK display   Dario Binacchi
• [PATCH] cmd: fuse: add switch for quiet operation   Rogerio Guerra Borin
• [PATCH] cmd: fuse: add switch for quiet operation   Rogerio Guerra Borin
• [PATCH] cmd: fuse: add switch for quiet operation   Rogerio Guerra Borin
• [PATCH 1/2] arc: Rework Kconfig choice menus   Alexey Brodkin
• [PATCH 2/2] arc: Migrate to SYS_{BIG,LITTLE}_ENDIAN fully   Alexey Brodkin
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   Michael Brown
• Pull request: rpi-2025.04   Matthias Brugger
• [PATCH 1/5] acpi: new function acpi_update_checksum()   Matthias Brugger
• [PATCH 2/5] acpi: simplify updating header checksum   Matthias Brugger
• [PATCH 3/5] x86/acpi: simplify updating header checksum   Matthias Brugger
• [PATCH 4/5] qemu-sbsa: simplify updating ACPI table header checksum   Matthias Brugger
• [PATCH 5/5] arm: simplify updating ACPI table header checksum   Matthias Brugger
• [PATCH] ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC rev.200 board   Patrice CHOTARD
• [PATCH] ARM: stm32: Introduce DH STM32MP15xx DHSOM board specific defconfigs   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Add support for environment in eMMC on STM32MP13xx DHCOR SoM   Patrice CHOTARD
• [PATCH 1/5] dm: pwm: Check if duty_ns is lower than period_ns   Patrice CHOTARD
• [PATCH 4/5] configs: stm32mp13: Enable MFD timer and PWM for stm32mp13_defconfig   Patrice CHOTARD
• [PATCH 5/5] ARM: dts: stm32: Add TIMERS inverted PWM channel 3 on STM32MP135F-DK   Patrice CHOTARD
• [PATCH 2/5] mach-stm32: add multifunction timer driver support   Patrice CHOTARD
• [PATCH 3/5] pwm: stm32: add driver to support pwm with timer   Patrice CHOTARD
• [PATCH] ARM: stm32mp: Fix dram_bank_mmu_setup() for ram_top=0   Patrice CHOTARD
• [PATCH] ARM: stm32mp: Fix dram_bank_mmu_setup() for ram_top=0   Patrice CHOTARD
• [PATCH 5/5] ARM: dts: stm32: Add TIMERS inverted PWM channel 3 on STM32MP135F-DK   Patrice CHOTARD
• [PATCH 4/5] configs: stm32mp13: Enable MFD timer and PWM for stm32mp13_defconfig   Patrice CHOTARD
• [PATCH 3/5] pwm: stm32: add driver to support pwm with timer   Patrice CHOTARD
• [PATCH 2/5] mach-stm32: add multifunction timer driver support   Patrice CHOTARD
• [PATCH 1/5] dm: pwm: Check if duty_ns is lower than period_ns   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC rev.200 board   Patrice CHOTARD
• [PATCH v2 2/3] ARM: dts: stm32: drop "st,led1" compatible   Patrice CHOTARD
• [PATCH v2 1/3] ARM: dts: stm32: drop "st,button1" compatible   Patrice CHOTARD
• [PATCH v2 1/3] ARM: dts: stm32: drop "st,button1" compatible   Patrice CHOTARD
• [PATCH] ARM: stm32: Introduce DH STM32MP15xx DHSOM board specific defconfigs   Patrice CHOTARD
• [PATCH] ARM: stm32: Fix CONFIG_BOOTCOUNT_ALTBOOTCMD update on DH STM32MP1 DHSOM   Patrice CHOTARD
• [PATCH] configs: stm32f769-disco: Fix console cmdline   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Add support for environment in eMMC on STM32MP13xx DHCOR SoM   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/5] dm: pwm: Check if duty_ns is lower than period_ns   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/5] dm: pwm: Check if duty_ns is lower than period_ns   Patrice CHOTARD
• [PATCH v2 2/4] pwm: stm32: add driver to support pwm with timer   Patrice CHOTARD
• [PATCH] board: st: stm32f746-disco: Update MAINTAINERS file   Patrice CHOTARD
• [PATCH v2 1/4] mach-stm32: add multifunction timer driver support   Patrice CHOTARD
• [PATCH v2 2/4] pwm: stm32: add driver to support pwm with timer   Patrice CHOTARD
• [PATCH v2 3/4] configs: stm32mp13: Enable MFD timer and PWM for stm32mp13_defconfig   Patrice CHOTARD
• [PATCH v2 4/4] ARM: dts: stm32: Add TIMERS inverted PWM channel 3 on STM32MP135F-DK   Patrice CHOTARD
• [PATCH] serial: stm32: restrict _debug_uart_init() usage   Patrice CHOTARD
• [PULL] Pull request for u-boot next / v2025.07 = u-boot-stm32-20250312   Patrice CHOTARD
• [PATCH 4/6] ARM: dts: add stm32f769-disco-mb1166-reva09   Patrice CHOTARD
• [PATCH 3/6] ARM: dts: stm32: add display support on stm32f769-disco   Patrice CHOTARD
• [PATCH 2/6] ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco   Patrice CHOTARD
• [PATCH 1/6] ARM: dts: stm32: add DSI support on stm32f769   Patrice CHOTARD
• [PATCH 6/6] board: stm32f769-disco: support FRD400B25025-A-CTK display   Patrice CHOTARD
• dtc: "syntax error" linked to &{label/subnode} syntax   Patrice CHOTARD
• [PATCH] dtc: introduce label relative path references   Patrice CHOTARD
• [PATCH v4 0/8] Introduce J742S2 SoC and EVM   Manorit Chawdhry
• [PATCH v4 1/8] tools: binman: control.py: Delete template nodes after parsing   Manorit Chawdhry
• [PATCH v4 2/8] arm: dts: k3-j784s4-binman.dtsi: Clean up and templatize boot binaries   Manorit Chawdhry
• [PATCH v4 3/8] arm: dts: k3-j784s4-ddr: Refactor J784s4 ddr file to a common file   Manorit Chawdhry
• [PATCH v4 4/8] soc: Add information to identify the J742S2 SoC family   Manorit Chawdhry
• [PATCH v4 5/8] arm: mach-k3: j742s2: Introduce clock and device files for J742S2 SoC   Manorit Chawdhry
• [PATCH v4 6/8] board: ti: Introduce basic board files for the J742S2 family   Manorit Chawdhry
• [PATCH v4 7/8] arm: dts: Introduce J742S2 U-boot DTS files   Manorit Chawdhry
• [PATCH v4 8/8] configs: Introduce configs for J742S2   Manorit Chawdhry
• [PATCH v4 03/11] ARM: dts: socfpga: add Mercury+ AA1 for u-boot dts   Chee, Tien Fong
• [PATCH v4 03/11] ARM: dts: socfpga: add Mercury+ AA1 for u-boot dts   Chee, Tien Fong
• [PATCH 1/2] arch: arm: dts: Enable kernel itb file generation for Agilex5 SoCFPGA   Chee, Tien Fong
• [PATCH 2/2] configs: Enable VAB flow for Agilex5 SoCFPGA boards   Chee, Tien Fong
• [PATCH] drivers: ddr: altera: Fix integer overflow during size calculation   Chee, Tien Fong
• [PATCH v1 1/2] arm: socfpga: mailbox: Notify SDM on HPS code execution stages   Chee, Tien Fong
• [PATCH v1 2/2] arm: socfpga: spl: Notify SDM on FSBL execution   Chee, Tien Fong
• [PATCH 1/1] drivers: fpga: Add partial reconfiguration console commands   Chee, Tien Fong
• [PATCH] ARM: socfpga: Drop incorrect imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION*   Chee, Tien Fong
• [PATCH] ARM: socfpga: Drop incorrect imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION*   Chee, Tien Fong
• [PATCH v4 03/11] ARM: dts: socfpga: add Mercury+ AA1 for u-boot dts   Chee, Tien Fong
• [PATCH] configs: Remove duplicated bootcmd 'mmc dev ${mmcdev}'   Aristo Chen
• [PATCH v2 06/11] video: rockchip: Add VOP2 support   Chaoyi Chen
• [PATCH v6 0/8] Add Starfive JH7110 Cadence USB driver   Minda Chen
• [PATCH v7 0/8] Add Starfive JH7110 Cadence USB driver   Minda Chen
• [PATCH v7 1/8] usb: cdns3: Set USB PHY mode in cdns3_drd_update_mode()   Minda Chen
• [PATCH v7 2/8] phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver   Minda Chen
• [PATCH v7 3/8] phy: starfive: Add Starfive JH7110 PCIe 2.0 PHY driver   Minda Chen
• [PATCH v7 4/8] usb: cdns: starfive: Get dr mode from wrapper device dts node   Minda Chen
• [PATCH v7 5/8] usb: cdns: starfive: Add cdns USB driver   Minda Chen
• [PATCH v7 6/8] spl: starfive: visionfive2: Disable USB overcurrent pin by default.   Minda Chen
• [PATCH v7 7/8] configs: starfive: Add visionfive2 cadence USB configuration   Minda Chen
• [PATCH v7 8/8] MAINTAINERS: Update Starfive visionfive2 maintain files.   Minda Chen
• [PATCH v7 0/8] Add Starfive JH7110 Cadence USB driver   Minda Chen
• [PATCH v1] MAINTAINERS: Add USB driver file to visionfive2 maintain files.   Minda Chen
• [PATCH v1] MAINTAINERS: Add USB driver file to visionfive2 maintain files.   Minda Chen
• [PATCH v1 0/3] Risc-V 32 bit/64 bit images   Mayuresh Chitale
• [PATCH v1 1/3] riscv: image: Add new image type for RV64   Mayuresh Chitale
• [PATCH v1 2/3] riscv: Select appropriate image type   Mayuresh Chitale
• [PATCH v1 3/3] booti/bootm: riscv: Verify image arch type   Mayuresh Chitale
• [PATCH] board: st: stm32f746-disco: Update MAINTAINERS file   Patrice Chotard
• [PATCH] dtc: introduce label relative path references   Patrice Chotard
• [PATCH] arch/x86: Add 64-bit U-Boot configuration without SPL   Jeremy Compostella
• [PATCH 0/5] 64-bit U-Boot configuration without SPL   Jeremy Compostella
• [PATCH 1/5] arch/x86: Add 64-bit U-Boot configuration without SPL   Jeremy Compostella
• [PATCH 2/5] arch/x86/cpu: Call x86_cpu_reinit_f for 64-bits   Jeremy Compostella
• [PATCH 3/5] arch/x86/lib: Fix CONFIG_X86_64 usage in zimage.c   Jeremy Compostella
• [PATCH 4/5] Fix EFI boot file name definition for 64-bit x86   Jeremy Compostella
• [PATCH 5/5] configs: Add coreboot64-no-spl_defconfig for 64-bit X86 without SPL   Jeremy Compostella
• [PATCH] arch/x86: Add 64-bit U-Boot configuration without SPL   Jeremy Compostella
• [PATCH v2 0/4] Better smartphone support (Qualcomm)   Caleb Connolly
• [PATCH v2 1/4] board/qualcomm: introduce phone config   Caleb Connolly
• [PATCH v2 2/4] cli_hush: support running bootcmd on boot retry   Caleb Connolly
• [PATCH v2 3/4] bootretry: check for bootretry variable changes   Caleb Connolly
• [PATCH v2 4/4] doc: board/qualcomm: describe phone support and bringup   Caleb Connolly
• [PATCH v1 6/6] configs: add qcom_ipq5424_mmc_defconfig   Caleb Connolly
• [PATCH 0/3] clk/qcom: fixes and more SC7280 clocks   Caleb Connolly
• [PATCH 1/3] clk/qcom: bubble up qcom_gate_clk_en() errors   Caleb Connolly
• [PATCH 2/3] clk/qcom: sc7280: add some debug data   Caleb Connolly
• [PATCH 3/3] clk/qcom: sc7280: add GENI, PCIe, and more USB clocks   Caleb Connolly
• [PATCH v2 0/4] Better smartphone support (Qualcomm)   Caleb Connolly
• [PATCH 0/3] Qualcomm: implement support for GENI firmware loading   Caleb Connolly
• [PATCH 1/3] i2c: geni: fix error message wording in clk_disable   Caleb Connolly
• [PATCH 2/3] misc: introduce Qcom GENI wrapper   Caleb Connolly
• [PATCH 3/3] i2c: geni: load firmware if required   Caleb Connolly
• [PATCH] lmb: change the return code on lmb_alloc_addr()   Caleb Connolly
• [PATCH 0/6] MSM8916: Bring secondary cores online with spin-table   Caleb Connolly
• [PATCH v1 6/6] configs: add qcom_ipq5424_mmc_defconfig   Caleb Connolly
• [PATCH] pinctrl/qcom: fix kconfig option names   Caleb Connolly
• [PATCH v2 0/6] Add initial support for IPQ9574 based boards   Caleb Connolly
• [PATCH v5 0/7] Add initial support for IPQ9574 based boards   Caleb Connolly
• [PATCH v6 0/7] Add initial support for IPQ9574 based boards   Caleb Connolly
• [PATCH v2 0/5] rng: msm: fixes for MSM8916   Caleb Connolly
• [PATCH v3] mach-snapdragon: support parsing memory info from external FDT   Caleb Connolly
• [PATCH] mach-snapdragon: handle platforms without PSCI support   Caleb Connolly
• [PATCH 0/2] Snapdragon SC7280 pinctrl   Caleb Connolly
• [PATCH 0/3] qcom: MSM8916 sysreset support   Caleb Connolly
• [PATCH] pinctrl/qcom: fix kconfig option names   Caleb Connolly
• [PATCH 0/6] MSM8916: Bring secondary cores online with spin-table   Caleb Connolly
• [PATCH 2/3] misc: introduce Qcom GENI wrapper   Caleb Connolly
• [PULL] Please pull qcom-next-20250317   Caleb Connolly
• [PATCH 0/2] clk/qcom: fix UFS and MMC clock enable errors   Caleb Connolly
• [PATCH 1/2] clk/stub: add sc7280-rpmh clock   Caleb Connolly
• [PATCH 2/2] clk/qcom: sc7280: add missing UFS and MMC clocks   Caleb Connolly
• [PATCH 3/6] mach-snapdragon: qcom SCM call support   Caleb Connolly
• [PATCH] mach-snapdragon: always select SYSRESET_PSCI for ARCH_SNAPDRAGON   Caleb Connolly
• [PATCH 0/2] power: regulator: add qcom usb vbus   Caleb Connolly
• [PATCH 2/2] power: regulator: add qcom-usb-vbus   Caleb Connolly
• [PATCH v4 1/1] efi_loader: expose the device-tree file name   Caleb Connolly
• [PATCH 1/2] mach-snapdragon: of_fixup: fix property length at writing   Caleb Connolly
• [PATCH 0/4] Qualcomm: fix sdm845 clocks and enable fastboot   Caleb Connolly
• [PATCH 1/4] clk/stub: add sdm845 rpmh clock   Caleb Connolly
• [PATCH 2/4] clk/qcom: sdm845: add GCC_AGGRE_UFS_PHY_AXI_CLK   Caleb Connolly
• [PATCH 3/4] mach-snapdragon: enable DM_USB_GADGET by default   Caleb Connolly
• [PATCH 4/4] qcom_defconfig: enable fastboot   Caleb Connolly
• [PULL] Please pull qcom-next-20250324   Caleb Connolly
• [PATCH 0/3] scsi: ensure writes are flushed to disk   Caleb Connolly
• [PATCH 1/3] scsi: fix typo in setup_read_ext()   Caleb Connolly
• [PATCH 2/3] scsi: de-dup calls to scsi_setup_write_ext()   Caleb Connolly
• [PATCH 3/3] scsi: sync cache on write   Caleb Connolly
• [PULL] Please pull qcom-next-20250324   Caleb Connolly
• [PATCH 2/3] scsi: de-dup calls to scsi_setup_write_ext()   Caleb Connolly
• [PATCH 3/3] scsi: sync cache on write   Caleb Connolly
• [PATCH 3/3] scsi: sync cache on write   Caleb Connolly
• [PATCH v2 0/3] scsi: ensure writes are flushed to disk   Caleb Connolly
• [PATCH v2 1/3] scsi: fix typo in setup_read_ext()   Caleb Connolly
• [PATCH v2 2/3] scsi: sync cache on write   Caleb Connolly
• [PATCH v2 3/3] ata: ahci: implement SCSI_SYNC_CACHE   Caleb Connolly
• [PATCH 0/4] Qualcomm: expand capsule update support   Caleb Connolly
• [PATCH 1/4] mach-snapdragon: track boot source   Caleb Connolly
• [PATCH 2/4] mach-snapdragon: CapsuleUpdate: support all boot methods   Caleb Connolly
• [PATCH 3/4] dfu: scsi: don't call scsi_scan()   Caleb Connolly
• [PATCH 4/4] qcom_defconfig: enable capsule update support   Caleb Connolly
• [PATCH 0/4] Qualcomm: expand capsule update support   Caleb Connolly
• [PATCH 4/4] qcom_defconfig: enable capsule update support   Caleb Connolly
• [PATCH v4 03/29] video: Use a local mode_info struct in the EFI driver   Caleb Connolly
• [PATCH v4 13/29] efi: lmb: Avoid access to _start   Caleb Connolly
• [PATCH v4 14/29] efi: arm: Don't do the EL2 switch when running under EFI   Caleb Connolly
• [PATCH v4 15/29] efi: arm: Avoid allocating page tables when running under EFI   Caleb Connolly
• [PATCH v4 16/29] efi: arm: Avoid enabling caches when running under EFI   Caleb Connolly
• [PATCH v4 17/29] efi: arm: Implement access to global_data for EFI   Caleb Connolly
• [PATCH v4 18/29] efi: arm: Omit the ARM start-up code in the EFI app   Caleb Connolly
• [PATCH v4 22/29] efi: arm: Drop startup code from the app   Caleb Connolly
• [PATCH v4 29/29] efi: arm: Add an EFI app for arm64   Caleb Connolly
• [PATCH v4 00/29] arm: Support building as an EFI app   Caleb Connolly
• [PATCH v2 13/15] mach-snapdragon: Support booting as a coreboot payload   Caleb Connolly
• [PATCH] qcom_defconfig: enable OF_UPSTREAM_BUILD_VENDOR   Caleb Connolly
• [PATCH 1/2] bloblist: fix the overriding of fdt from bloblist   Caleb Connolly
• [PATCH 1/2] bloblist: fix the overriding of fdt from bloblist   Caleb Connolly
• [PATCH 0/4] spmi: msm: fix pid mapping for v5 & v7 controllers   Caleb Connolly
• [PATCH v4 1/1] efi_loader: expose the device-tree file name   Caleb Connolly
• [PATCH v2 1/4] board/qualcomm: introduce phone config   Caleb Connolly
• [PATCH v4 1/1] efi_loader: expose the device-tree file name   Caleb Connolly
• [PATCH] phy: Add SDM660 support to Qualcomm QUSB2 phy   Caleb Connolly
• [PATCH] drivers: pinctrl: Add Qualcomm SDM630/660 TLMM driver   Caleb Connolly
• [PATCH v1] regulator: qcom-rpmh-regulator: add support for pmm8654 regulators   Caleb Connolly
• [PATCH v1 1/2] pinctrl: qcom: add driver for SA8775P SoC   Caleb Connolly
• [PATCH v1 2/2] qcom_defconfig: enable pinctrl for SA8775P   Caleb Connolly
• [PATCH v2 00/56] expo: Various features and improvements   Caleb Connolly
• [PATCH] mach-snapdragon: of_fixup: fix condition check in ft_board_setup()   Caleb Connolly
• [PATCH v4 0/6] Better smartphone support (Qualcomm)   Caleb Connolly
• [PATCH v4 1/6] board/qualcomm: introduce phone config   Caleb Connolly
• [PATCH v4 2/6] cli_hush: support running bootcmd on boot retry   Caleb Connolly
• [PATCH v4 3/6] bootretry: check for bootretry variable changes   Caleb Connolly
• [PATCH v4 4/6] doc: board/qualcomm: describe phone support and bringup   Caleb Connolly
• [PATCH v4 5/6] button: qcom-pmic: prettify and standardise button labels   Caleb Connolly
• [PATCH v4 6/6] button: make button_get_by_label() case insensitive   Caleb Connolly
• [PATCH] qcom_defconfig: enable OF_UPSTREAM_BUILD_VENDOR   Caleb Connolly
• [PATCH] phy: Add SDM660 support to Qualcomm QUSB2 phy   Caleb Connolly
• [PATCH] clk/qcom: sdm845: add missing USB3 clocks   Caleb Connolly
• [PATCH 0/4] Qualcomm: fix sdm845 clocks and enable fastboot   Caleb Connolly
• [PATCH 0/2] power: regulator: add qcom usb vbus   Caleb Connolly
• [PATCH v1] regulator: qcom-rpmh-regulator: add support for pmm8654 regulators   Caleb Connolly
• [PATCH 0/4] spmi: msm: fix pid mapping for v5 & v7 controllers   Caleb Connolly
• [PATCH] mach-snapdragon: of_fixup: fix condition check in ft_board_setup()   Caleb Connolly
• [PATCH v2 1/8] legacy-net: wget: fix wget_info handling after new tcp legacy stack   Adriano Cordova
• [PATCH v2 2/8] efi_loader: expose symbols to be used by the EFI network stack   Adriano Cordova
• [PATCH v2 3/8] efi_loader: efi_setup: Add efi_start_obj_list() to efi_setup.c   Adriano Cordova
• [PATCH v2 4/8] efi_loader: efi_net: Add efi_net_do_start() to efi_net.c   Adriano Cordova
• [PATCH v2 5/8] efi_loader: efi_device_path: Pass net udevice as argument   Adriano Cordova
• [PATCH v2 6/8] efi_loader: efi_net: Add device path cache   Adriano Cordova
• [PATCH v2 7/8] efi_loader: efi_net: Add dhcp cache   Adriano Cordova
• [PATCH v2 8/8] efi_loader: efi_net: Add support for multiple efi_net_obj   Adriano Cordova
• [PATCH v3 1/8] legacy-net: wget: fix wget_info handling after new tcp legacy stack   Adriano Cordova
• [PATCH v3 2/8] efi_loader: expose symbols to be used by the EFI network stack   Adriano Cordova
• [PATCH v3 3/8] efi_loader: efi_setup: Add efi_start_obj_list() to efi_setup.c   Adriano Cordova
• [PATCH v3 4/8] efi_loader: efi_net: Add efi_net_do_start() to efi_net.c   Adriano Cordova
• [PATCH v3 5/8] efi_loader: efi_device_path: Pass net udevice as argument   Adriano Cordova
• [PATCH v3 6/8] efi_loader: efi_net: Add device path cache   Adriano Cordova
• [PATCH v3 7/8] efi_loader: efi_net: Add dhcp cache   Adriano Cordova
• [PATCH v3 8/8] efi_loader: efi_net: Add support for multiple efi_net_obj   Adriano Cordova
• [PATCH 00/16] EFI net driver - series 2/2: Support multiple EFI net objects   Adriano Cordova
• [PATCH 01/16] efi_driver: efi_net: Add EFI network device driver   Adriano Cordova
• [PATCH 02/16] efi_loader: efi_net: check efi_search_protocol return value   Adriano Cordova
• [PATCH 03/16] efi_loader: efi_net: Reuse efi_net_obj's   Adriano Cordova
• [PATCH 04/16] efi_loader: efi_net: Let efi_net_obj store pointers to efi_simple_network, efi_simple_network_mode, and the efi handle   Adriano Cordova
• [PATCH 05/16] efi_net: efi_loader: Add efi_netobj_alloc to allocate an efi_net_obj   Adriano Cordova
• [PATCH 06/16] efi_loader: efi_net: Manage EFI net objects with efi_[dis]connect_controller   Adriano Cordova
• [PATCH 07/16] eth_uclass: Add eth_create_device to create a net udevice   Adriano Cordova
• [PATCH 08/16] efi_driver: efi_net: UCLASS_ETH driver for EFI net devices   Adriano Cordova
• [PATCH 09/16] efi_driver: efi_uclass: Add unbind method to efi_driver_ops   Adriano Cordova
• [PATCH 10/16] efi_driver: efi_net: Add efi_net_unbind_drv method to efi_net driver   Adriano Cordova
• [PATCH 11/16] efi_loader: efi_net: Add http, ip4_config2, and pxe on demand   Adriano Cordova
• [PATCH 12/16] efi_loader: efi_net: add snp_owner field to efi_net_obj struct   Adriano Cordova
• [PATCH 13/16] efi_selftest: Add selftest for counting EFI netdevices   Adriano Cordova
• [PATCH 14/16] py/tests: test_efi_selftest: Add test for counting EFI netdevices   Adriano Cordova
• [PATCH 15/16] py/tests: test_efi_selftest: Add test for removing EFI netdevices   Adriano Cordova
• [PATCH 16/16] efi_selftest: Add test for efi_netdev driver   Adriano Cordova
• [PATCH 0/3] Add initrd support to bootm EFI payloads   Adriano Cordova
• [PATCH 1/3] efi_loader: efi_load_initrd: provide a memory mapped initrd   Adriano Cordova
• [PATCH 2/3] efi_loader: binary_run: register an initrd   Adriano Cordova
• [PATCH 3/3] bootm: add support for initrd in do_bootm_efi   Adriano Cordova
• [PATCH v2 0/3] Add initrd support to bootm EFI payloads   Adriano Cordova
• [PATCH v2 1/3] efi_loader: efi_load_initrd: provide a memory mapped initrd   Adriano Cordova
• [PATCH v2 2/3] efi_loader: binary_run: register an initrd   Adriano Cordova
• [PATCH v2 3/3] bootm: add support for initrd in do_bootm_efi   Adriano Cordova
• [PATCH 2/3] efi_loader: binary_run: register an initrd   Adriano Córdova
• [PATCH 1/3] efi_loader: efi_load_initrd: provide a memory mapped initrd   Adriano Córdova
• [PATCH 0/3] Add initrd support to bootm EFI payloads   Adriano Córdova
• [PATCH 2/3] efi_loader: binary_run: register an initrd   Adriano Córdova
• [PATCH 2/3] efi_loader: binary_run: register an initrd   Adriano Córdova
• [PATCH v2 5/6] efi_loader: move path out of file_handle   Gabriel D'Alimonte
• [PATCH 00/10] Add falcon support for am62a, 62p and 62x   Anshul Dalal
• [PATCH 01/10] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
• [PATCH 02/10] cmd: Kconfig: enable CMD_BOOTI for ARCH_K3   Anshul Dalal
• [PATCH 03/10] mach-k3: fix reading size and addr from fdt on R5   Anshul Dalal
• [PATCH 04/10] arm: dts: am62a: allow booting from eMMC   Anshul Dalal
• [PATCH 05/10] arch: arm: k3-binman: add fit for falcon boot   Anshul Dalal
• [PATCH 06/10] mach-k3: add eMMC FS boot support for am62[ap]   Anshul Dalal
• [PATCH 07/10] mach-k3: sysfw-loader: update img_hdr for falcon   Anshul Dalal
• [PATCH 08/10] configs: ti_armv7_common: add cfgs for SPI falcon boot   Anshul Dalal
• [PATCH 09/10] config: add falcon boot config fragment for am62x   Anshul Dalal
• [PATCH 10/10] mach-k3: common: add falcon support for 62[axp]   Anshul Dalal
• [PATCH 02/10] cmd: Kconfig: enable CMD_BOOTI for ARCH_K3   Anshul Dalal
• [EXTERNAL] Re: [PATCH 08/10] configs: ti_armv7_common: add cfgs for SPI falcon boot   Anshul Dalal
• [EXTERNAL] Re: [PATCH 09/10] config: add falcon boot config fragment for am62x   Anshul Dalal
• [PATCH 02/10] cmd: Kconfig: enable CMD_BOOTI for ARCH_K3   Anshul Dalal
• [PATCH v1] config: falcon: move CFG_SYS_SPI_* to Kconfig   Anshul Dalal
• [PATCH v2] config: falcon: move CFG_SYS_SPI_* to Kconfig   Anshul Dalal
• [PATCH v3] spl: return header size to spl_load in os boot   Anshul Dalal
• [PATCH v1] spl: remove usage of CMD_(BOOTI|BOOTZ) from image parsing   Anshul Dalal
• [PATCH v2 0/8] Add falcon support for am62a, 62p and 62x   Anshul Dalal
• [PATCH v2 1/8] spl: Kconfig: allow K3 devices to use falcon mode   Anshul Dalal
• [PATCH v2 2/8] mach-k3: fix reading size and addr from fdt on R5   Anshul Dalal
• [PATCH v2 3/8] arm: dts: am62a: allow booting from eMMC   Anshul Dalal
• [PATCH v2 4/8] arch: arm: k3-binman: add fit for falcon boot   Anshul Dalal
• [PATCH v2 5/8] mach-k3: add eMMC FS boot support for am62[ap]   Anshul Dalal
• [PATCH v2 6/8] mach-k3: sysfw-loader: update img_hdr for falcon   Anshul Dalal
• [PATCH v2 7/8] config: add falcon boot config fragment for am62x   Anshul Dalal
• [PATCH v2 8/8] mach-k3: common: add falcon support for 62[axp]   Anshul Dalal
• [PATCH v2] spl: remove usage of CMD_BOOT[IZ] from image parsing   Anshul Dalal
• [PATCH v3] spl: remove usage of CMD_BOOT[IZ] from image parsing   Anshul Dalal
• [PATCH v2] spl: remove usage of CMD_BOOT[IZ] from image parsing   Anshul Dalal
• [PATCH v3] spl: remove usage of CMD_BOOT[IZ] from image parsing   Anshul Dalal
• [PATCH v4] spl: remove usage of CMD_BOOT[IZ] from image parsing   Anshul Dalal
• [PATCH v3] spl: remove usage of CMD_BOOT[IZ] from image parsing   Anshul Dalal
• [PATCH v5] spl: remove usage of CMD_BOOT[IZ] from image parsing   Anshul Dalal
• [PATCH v4] spl: remove usage of CMD_BOOT[IZ] from image parsing   Anshul Dalal
• [PATCH v4] spl: remove usage of CMD_BOOT[IZ] from image parsing   Anshul Dalal
• [PATCH v2] config: falcon: move CFG_SYS_SPI_* to Kconfig   Anshul Dalal
• [PATCH 1/5] reset: rzg2l-usbphy-ctrl: Add new driver   Biju Das
• [PATCH 1/5] reset: rzg2l-usbphy-ctrl: Add new driver   Biju Das
• [PATCH] board: beagle: Add support for BeagleY-AI   Andrew Davis
• [PATCH] arm: dts: k3: Remove leftover file after OF_UPSTREAM   Andrew Davis
• [PATCH] doc: Fix typo bootfloe to bootflow   Andrew Davis
• [PATCH] arm: mach-k3: j721e: Split out J7200 SoC support from J721e   Andrew Davis
• [PATCH 1/3] arm: mach-k3: Remove undefined Kconfig symbols BOARD and SPL_BOARD   Andrew Davis
• [PATCH 2/3] arm: mach-k3: Enable BINMAN Kconfig symbol for all ARCH_K3   Andrew Davis
• [PATCH 3/3] arm: mach-k3: Make K3_LOAD_SYSFW and SYS_K3_SPL_ATF default enabled   Andrew Davis
• [PATCH 0/6] MSM8916: Bring secondary cores online with spin-table   Sam Day
• [PATCH] clk/qcom: sdm845: add missing USB3 clocks   Sam Day
• [PATCH v2 1/4] board/qualcomm: introduce phone config   Sam Day
• [PATCH] mach-snapdragon: of_fixup: fix condition check in ft_board_setup()   Sam Day
• [PATCH v1] board: verdin-am62: fix missing memory fixup call   Francesco Dolcini
• [PATCH v1] common/memsize.c: Fix get_ram_size() original data restore   Francesco Dolcini
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Francesco Dolcini
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Francesco Dolcini
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Francesco Dolcini
• [PATCH] toradex: apalis-imx6: Fix build failure when CONFIG_VIDEO_IPUV3 is enabled   Francesco Dolcini
• [PATCH] toradex: apalis-imx6: Fix build failure when CONFIG_VIDEO_IPUV3 is enabled   Francesco Dolcini
• [PATCH 0/2] Build fixes for CONFIG_XPL_BUILD in dts files   Hendrik Donner
• [PATCH 1/2] imx8qm: Fix build when using SPL   Hendrik Donner
• [PATCH 2/2] Makefile.lib: Set xPL build related defines for DTB build   Hendrik Donner
• [PATCH 2/2] Makefile.lib: Set xPL build related defines for DTB build   Hendrik Donner
• [PATCH] checkpatch.pl: Report an error for CONFIG_xPL_BUILD in device trees   Hendrik Donner
• [PATCH 0/2] Do not use CONFIG_XPL_BUILD in device tree   Hendrik Donner
• [PATCH 1/2] imx8qxp: Do not use CONFIG_XPL_BUILD in device tree   Hendrik Donner
• [PATCH 2/2] imx8qm: Do not use CONFIG_XPL_BUILD in device tree   Hendrik Donner
• [PATCH 1/2] imx8qxp: Do not use CONFIG_XPL_BUILD in device tree   Hendrik Donner
• [PATCH 0/3] Enable MUX_MMIO at SPL stage   Anurag Dutta
• [PATCH 1/3] mux: Kconfig: Add Kconfig options for MUX_MMIO   Anurag Dutta
• [PATCH 2/3] configs: j7200_evm_a72_defconfig: Enable MUX_MMIO at SPL   Anurag Dutta
• [PATCH 3/3] configs: j721e_evm_a72_defconfig: Enable MUX_MMIO at SPL   Anurag Dutta
• [PATCH 16/17] efi_loader: Move .dynamic out of .text in EFI   Sam Edwards
• [PATCH 00/17] Various toolchain compatibility fixes/improvements   Sam Edwards
• [PATCH 00/17] Various toolchain compatibility fixes/improvements   Sam Edwards
• [PATCH v2 00/15] Various toolchain compatibility fixes/improvements   Sam Edwards
• [PATCH v2 01/15] arm: Remove stray .mmutable reference in linker script   Sam Edwards
• [PATCH v2 02/15] arm: Exclude eabi_compat from LTO   Sam Edwards
• [PATCH v2 03/15] arm: Add __aeabi_memclr in eabi_compat   Sam Edwards
• [PATCH v2 04/15] arm: Add aligned-memory aliases to eabi_compat   Sam Edwards
• [PATCH v2 05/15] arm: Discard unwanted sections in linker script   Sam Edwards
• [PATCH v2 06/15] arm: Replace 'adrl' in EFI crt0   Sam Edwards
• [PATCH v2 07/15] x86: Fix call64's section flags   Sam Edwards
• [PATCH v2 08/15] makefile: Avoid objcopy --gap-fill for .hex/.srec   Sam Edwards
• [PATCH v2 09/15] makefile: Add `norelro` linker option   Sam Edwards
• [PATCH v2 10/15] makefile: Add READELF command variable   Sam Edwards
• [PATCH v2 11/15] arm: riscv: efi: Export _start symbol from crt0_*_efi stubs   Sam Edwards
• [PATCH v2 12/15] efi_loader: Move .dynamic out of .text in EFI   Sam Edwards
• [PATCH v2 13/15] scripts/Makefile.lib: efi: Preserve the .dynstr section as well   Sam Edwards
• [PATCH v2 14/15] spl: riscv: opensbi: Error on misaligned FDT   Sam Edwards
• [PATCH v2 15/15] spl: Align FDT load address   Sam Edwards
• [PATCH v2 00/15] Various toolchain compatibility fixes/improvements   Sam Edwards
• [PATCH 00/13] *** Various Improvements for phyCORE-AM62/A SoMs ***   Wadim Egorov
• [PATCH 01/13] arm: dts: k3-am62a-phycore-som-binman: Provide capsule nodes   Wadim Egorov
• [PATCH 02/13] include: configs: phycore-am62ax: Define capsule FW names   Wadim Egorov
• [PATCH 03/13] configs: phycore_am62ax_a53_defconfig: Enable capsule update   Wadim Egorov
• [PATCH 04/13] doc: phytec: k3: Add a common part for Environment and EFI Capsules   Wadim Egorov
• [PATCH 05/13] configs: Add phycore_am62ax_r5_usbdfu_defconfig   Wadim Egorov
• [PATCH 06/13] board: phytec: phycore_am62x: Use custom k3_dfu.env fragment   Wadim Egorov
• [PATCH 07/13] board: phytec: phycore_am62ax: Add Network/SPI/DFU env variables   Wadim Egorov
• [PATCH 08/13] arch: arm: dts: k3-am62a7-phyboard-lyra: Add missing boot phase tag   Wadim Egorov
• [PATCH 09/13] arch: arm: dts: k3-am625-phyboard-lyra: Add missing boot phase tag   Wadim Egorov
• [PATCH 10/13] board: phytec: common: k3: Make configure_capsule_updates() static   Wadim Egorov
• [PATCH 11/13] board: phytec: common: Add phyCORE-AM62Ax   Wadim Egorov
• [PATCH 12/13] arm: dts: k3-am62a-phycore-som-binman: Add SoM overlays   Wadim Egorov
• [PATCH 13/13] configs: phycore_am62ax_a53_defconfig: Add SoM overlays to OF_OVERLAY_LIST   Wadim Egorov
• [PATCH 01/13] net: tftp: Increase TFTP pkt string length to include null character   Wadim Egorov
• [PATCH 0/8] *** Add Ethernet boot support for AM62Ax + phyCORE-AM62 SoMs ***   Wadim Egorov
• [PATCH 1/8] arm: dts: k3-am625-phyboard-lyra-rdk: Add boot phase tag to phy_gmii_sel   Wadim Egorov
• [PATCH 2/8] configs: Add phycore_am62x_r5_ethboot_defconfig   Wadim Egorov
• [PATCH 3/8] configs: phycore_am62x_a53_defconfig: Update for ethernet boot   Wadim Egorov
• [PATCH 4/8] arch: arm: dts: k3-am62a7-phyboard-lyra-rdk-u-boot: Disable Ethernet2   Wadim Egorov
• [PATCH 5/8] arch: arm: mach-k3: am62a7: Probe CPSW NUSS in board_init_f()   Wadim Egorov
• [PATCH 6/8] arch: arm: mach-k3: r5: am62ax: Update SoC auto-gen data to enable CPSW boot   Wadim Egorov
• [PATCH 7/8] board: phytec: phycore_am62ax: Share ethernet resources with boot r5 core   Wadim Egorov
• [PATCH 8/8] configs: Add phycore_am62ax_r5_ethboot_defconfig   Wadim Egorov
• [PATCH v1] board: verdin-am62: fix missing memory fixup call   Stefan Eichenberger
• [PATCH v1] common/memsize.c: Fix get_ram_size() original data restore   Stefan Eichenberger
• [PATCH v1] common/memsize.c: Fix get_ram_size() original data restore   Stefan Eichenberger
• [PATCH v1] board: verdin-am62: remove spl_perform_fixups   Stefan Eichenberger
• examples: I2C Driver Model in Standalone Applications   Joshua Estes
• [PATCH v4 00/12] Add imx8mp video support   Fabio Estevam
• [PATCH v4 00/12] Add imx8mp video support   Fabio Estevam
• [PATCH v4 00/12] Add imx8mp video support   Fabio Estevam
• [PATCH v4 00/12] Add imx8mp video support   Fabio Estevam
• [PATCH 05/10] serial: mxc: Support bulk enabling clocks   Fabio Estevam
• [PATCH 01/10] clk: imx6q: Properly handle imx6qp ESPI clk_sels   Fabio Estevam
• [PATCH 01/10] clk: imx6q: Properly handle imx6qp ESPI clk_sels   Fabio Estevam
• [PATCH v1] config: falcon: move CFG_SYS_SPI_* to Kconfig   Fabio Estevam
• [PATCH v1] config: falcon: move CFG_SYS_SPI_* to Kconfig   Fabio Estevam
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Fabio Estevam
• [PATCH 00/10] clk: imx: Use Clock frameworkt to register UART clocks   Fabio Estevam
• [PATCH] imx8m: soc: cope with existing optee node   Fabio Estevam
• [PATCH] imx8m: soc: cope with existing optee node   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-master-20250312   Fabio Estevam
• [PATCH] imx93_evk: Fix wrong VDDQ voltage setting for LPDDR4x   Fabio Estevam
• [PATCH v4 00/12] Add imx8mp video support   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-next-20250313   Fabio Estevam
• [PATCH v2 1/2] board: toradex: apalis/colibri imx6: Detect new v1.2 SoM variant   Fabio Estevam
• [PATCH] mmc: fsl_esdhc: Migrate ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE to Kconfig   Fabio Estevam
• [PATCH v2] mailbox: add i.MX Messaging Unit (MU) driver   Fabio Estevam
• [PATCH] ARM: dts: imx: Drop bogus regulator extras on DH i.MX6 DHCOM DRC02   Fabio Estevam
• [PATCH] imx9: container.cfg: Guard tee.bin inclusion   Fabio Estevam
• [PATCH] ARM: dts: imx: Drop bogus regulator extras on DH i.MX6 DHCOM DRC02   Fabio Estevam
• [PATCH 1/2] imx8qxp: Do not use CONFIG_XPL_BUILD in device tree   Fabio Estevam
• [PATCH 00/10] clk: imx: Use Clock frameworkt to register UART clocks   Fabio Estevam
• [PATCH 00/10] clk: imx: Use Clock frameworkt to register UART clocks   Fabio Estevam
• [PATCH v4 02/14] arm: add initjmp()   Fabio Estevam
• [PATCH v4 02/14] arm: add initjmp()   Fabio Estevam
• [PATCH 00/10] clk: imx: Use Clock framework to register UART clocks   Fabio Estevam
• Re: [PATCH 00/24] clk: Add clk_resolve_parent_clk() and fix up iMX clock drivers   Fabio Estevam
• [PATCH V3 01/10] clk: imx6q: Properly handle imx6qp ECSPI clk_sels   Fabio Estevam
• [PATCH V3 01/10] clk: imx6q: Properly handle imx6qp ECSPI clk_sels   Fabio Estevam
• [PATCH V2 3/5] arm64: imx: imx8mm-beacon: Enable CPU_IMX   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-next-20250321   Fabio Estevam
• [PATCH V3 01/10] clk: imx6q: Properly handle imx6qp ECSPI clk_sels   Fabio Estevam
• [PATCH] configs: Remove duplicated bootcmd 'mmc dev ${mmcdev}'   Fabio Estevam
• [PATCH] phycore_imx8mp: Rework some of the RAM related Kconfig symbols   Fabio Estevam
• [PATCH 00/24] clk: Add clk_resolve_parent_clk() and fix up iMX clock drivers   Fabio Estevam
• [PATCH] board: beacon: imx8mp: Fix GIC clock for Overdrive mode   Fabio Estevam
• [PATCH V4 4/7] cpu: imx8_cpu: Print Speed grade if IMX_TMU.   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-next-20250325   Fabio Estevam
• [PATCH v2 00/24] clk: Add clk_resolve_parent_clk() and fix up iMX clock drivers   Fabio Estevam
• [PATCH] board: beacon: imx8mp: Fix GIC clock for Overdrive mode   Fabio Estevam
• [PATCH V4 0/7] Migrate IMX8, IMX8M and IMX9 to use imx8_cpu   Fabio Estevam
• [PATCH] arm64: imx8mp: Gracefully handle disabled ENV_IS_IN_SPI_FLASH   Fabio Estevam
• [PATCH V4 4/7] cpu: imx8_cpu: Print Speed grade if IMX_TMU.   Fabio Estevam
• [PATCH v4 00/12] Add imx8mp video support   Fabio Estevam
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Fabio Estevam
• [PATCH] sama5d27: Fix the 'reset' command   Fabio Estevam
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Fabio Estevam
• [PATCH v2] sama5d27: Fix the 'reset' command   Fabio Estevam
• [PATCH] crypto: fsl_hash: fix flush dcache alignment in caam_hash()   Peng Fan
• [PATCH 2/2] powerpc: mpc8xxx_spi: Catch bad chip variants earlier   Peng Fan
• [GIT PULL] please pull fsl-qoriq-2025-3-3   Peng Fan
• [PATCH V2 02/10] clk: imx6q: Register UART clocks   Peng Fan
• [PATCH] imx8m: soc: cope with existing optee node   Peng Fan
• [PATCH V2 01/10] clk: imx6q: Properly handle imx6qp ECSPI clk_sels   Peng Fan
• [PATCH V2 03/10] clk: imx8mm: register UART clocks   Peng Fan
• [PATCH V2 04/10] clk: imx8mn: register UART clocks   Peng Fan
• [PATCH V2 05/10] serial: mxc: Support bulk enabling clocks   Peng Fan
• [PATCH V2 06/10] board: beacon: imx8mm: Let clock system enable UART clock   Peng Fan
• [PATCH V2 07/10] board: beacon: imx8mn: Let clock system enable UART clock   Peng Fan
• [PATCH V2 08/10] clk: imx: select SPL_CLK_COMPOSITE_CCF when SPL_CLK_IMX8MP   Peng Fan
• [PATCH V2 09/10] configs: imx8mp_beacon: Select SPL_CLK_IMX8MP   Peng Fan
• [PATCH V2 10/10] board: beacon: imx8mp: Let clock system enable UART clock   Peng Fan
• [PATCH] imx8m: soc: cope with existing optee node   Peng Fan
• [PATCH] imx93_evk: Fix wrong VDDQ voltage setting for LPDDR4x   Peng Fan
• [PATCH] imx8m: soc: cope with existing optee node   Peng Fan
• [PATCH v2] mmc: mmc_boot: support sandisk and micron emmc boot/rpmb partition resizing   Peng Fan
• [PATCH V4 0/7] Migrate IMX8, IMX8M and IMX9 to use imx8_cpu   Peng Fan
• [PATCH v2 00/24] clk: Add clk_resolve_parent_clk() and fix up iMX clock drivers   Peng Fan
• [PATCH v8 02/19] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Peng Fan
• [PATCH v8 02/19] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Peng Fan
• [PATCH v8 02/19] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Peng Fan
• [PATCH 4/4] qcom_defconfig: enable capsule update support   Peng Fan
• [PATCH 00/10] clk: imx: Use Clock frameworkt to register UART clocks   Adam Ford
• [PATCH 01/10] clk: imx6q: Properly handle imx6qp ESPI clk_sels   Adam Ford
• [PATCH 02/10] clk: imx6q: Register UART clocks   Adam Ford
• [PATCH 03/10] clk: imx8mm: register UART clocks   Adam Ford
• [PATCH 04/10] clk: imx8mn: register UART clocks   Adam Ford
• [PATCH 05/10] serial: mxc: Support bulk enabling clocks   Adam Ford
• [PATCH 06/10] board: beacon: imx8mm: Let clock system enable UART clock   Adam Ford
• [PATCH 07/10] board: beacon: imx8mn: Let clock system enable UART clock   Adam Ford
• [PATCH 08/10] clk: imx: select SPL_CLK_COMPOSITE_CCF when SPL_CLK_IMX8MP   Adam Ford
• [PATCH 09/10] configs: imx8mp_beacon: Select SPL_CLK_IMX8MP   Adam Ford
• [PATCH 10/10] board: beacon: imx8mp: Let clock system enable UART clock   Adam Ford
• [PATCH 01/10] clk: imx6q: Properly handle imx6qp ESPI clk_sels   Adam Ford
• [PATCH 05/10] serial: mxc: Support bulk enabling clocks   Adam Ford
• [PATCH 01/10] clk: imx6q: Properly handle imx6qp ESPI clk_sels   Adam Ford
• [PATCH 00/10] clk: imx: Use Clock frameworkt to register UART clocks   Adam Ford
• [PATCH V2 01/10] clk: imx6q: Properly handle imx6qp ECSPI clk_sels   Adam Ford
• [PATCH V2 02/10] clk: imx6q: Register UART clocks   Adam Ford
• [PATCH V2 03/10] clk: imx8mm: register UART clocks   Adam Ford
• [PATCH V2 04/10] clk: imx8mn: register UART clocks   Adam Ford
• [PATCH V2 05/10] serial: mxc: Support bulk enabling clocks   Adam Ford
• [PATCH V2 06/10] board: beacon: imx8mm: Let clock system enable UART clock   Adam Ford
• [PATCH V2 07/10] board: beacon: imx8mn: Let clock system enable UART clock   Adam Ford
• [PATCH V2 08/10] clk: imx: select SPL_CLK_COMPOSITE_CCF when SPL_CLK_IMX8MP   Adam Ford
• [PATCH V2 09/10] configs: imx8mp_beacon: Select SPL_CLK_IMX8MP   Adam Ford
• [PATCH V2 10/10] board: beacon: imx8mp: Let clock system enable UART clock   Adam Ford
• [PATCH 00/10] clk: imx: Use Clock frameworkt to register UART clocks   Adam Ford
• [PATCH 00/10] clk: imx: Use Clock frameworkt to register UART clocks   Adam Ford
• [PATCH 00/10] clk: imx: Use Clock framework to register UART clocks   Adam Ford
• [PATCH V3 01/10] clk: imx6q: Properly handle imx6qp ECSPI clk_sels   Adam Ford
• [PATCH V3 02/10] clk: imx6q: Register UART clocks   Adam Ford
• [PATCH V3 03/10] clk: imx8mm: register UART clocks   Adam Ford
• [PATCH V3 04/10] clk: imx8mn: register UART clocks   Adam Ford
• [PATCH V3 05/10] serial: mxc: Support bulk enabling clocks   Adam Ford
• [PATCH V3 06/10] board: beacon: imx8mm: Let clock system enable UART clock   Adam Ford
• [PATCH V3 07/10] board: beacon: imx8mn: Let clock system enable UART clock   Adam Ford
• [PATCH V3 08/10] clk: imx: select SPL_CLK_COMPOSITE_CCF when SPL_CLK_IMX8MP   Adam Ford
• [PATCH V3 09/10] configs: imx8mp_beacon: Select SPL_CLK_IMX8MP   Adam Ford
• [PATCH V3 10/10] board: beacon: imx8mp: Let clock system enable UART clock   Adam Ford
• [PATCH 1/4] cpu: imx8_cpu: Print Speed grade if IMX_THERMAL or IMX_TMU   Adam Ford
• [PATCH 2/4] arm64: imx: imx8mm-beacon: Enable CPU_IMX   Adam Ford
• [PATCH 3/4] arm64: imx: imx8mn-beacon: Enable CPU_IMX   Adam Ford
• [PATCH 4/4] arm64: imx: imx8mp-beacon: Enable CPU_IMX   Adam Ford
• [PATCH V3 01/10] clk: imx6q: Properly handle imx6qp ECSPI clk_sels   Adam Ford
• [PATCH 00/24] clk: Add clk_resolve_parent_clk() and fix up iMX clock drivers   Adam Ford
• [PATCH V3 01/10] clk: imx6q: Properly handle imx6qp ECSPI clk_sels   Adam Ford
• [PATCH 1/4] cpu: imx8_cpu: Print Speed grade if IMX_THERMAL or IMX_TMU   Adam Ford
• [PATCH V2 1/5] imx: imx9: Imply IMX_TMU   Adam Ford
• [PATCH V2 2/5] cpu: imx8_cpu: Print Speed grade if IMX_THERMAL or IMX_TMU   Adam Ford
• [PATCH V2 3/5] arm64: imx: imx8mm-beacon: Enable CPU_IMX   Adam Ford
• [PATCH V2 4/5] arm64: imx: imx8mn-beacon: Enable CPU_IMX   Adam Ford
• [PATCH V2 5/5] arm64: imx: imx8mp-beacon: Enable CPU_IMX   Adam Ford
• [PATCH V2 3/5] arm64: imx: imx8mm-beacon: Enable CPU_IMX   Adam Ford
• [PATCH V2 3/5] arm64: imx: imx8mm-beacon: Enable CPU_IMX   Adam Ford
• [PATCH V3 0/6] Migrate IMX8, IMX8M and IMX9 to use imx8_cpu   Adam Ford
• [PATCH V3 1/6] imx: imx9: Imply IMX_TMU   Adam Ford
• [PATCH V3 2/6] imx: imx8m: Imply IMX_TMU   Adam Ford
• [PATCH V3 3/6] cpu: imx8_cpu: Print Speed grade if IMX_THERMAL or IMX_TMU   Adam Ford
• [PATCH V3 4/6] imx: imx8m: Imply CPU_IMX by default   Adam Ford
• [PATCH V3 5/6] imx: imx8: Imply CPU_IMX by default   Adam Ford
• [PATCH V3 6/6] imx: imx9: Imply CPU_IMX by default   Adam Ford
• [PATCH V3 5/6] imx: imx8: Imply CPU_IMX by default   Adam Ford
• [PATCH V3 3/6] cpu: imx8_cpu: Print Speed grade if IMX_THERMAL or IMX_TMU   Adam Ford
• [PATCH 00/24] clk: Add clk_resolve_parent_clk() and fix up iMX clock drivers   Adam Ford
• [PATCH] board: beacon: imx8mp: Fix GIC clock for Overdrive mode   Adam Ford
• [PATCH v2 00/24] clk: Add clk_resolve_parent_clk() and fix up iMX clock drivers   Adam Ford
• [PATCH] board: beacon: imx8mp: Fix GIC clock for Overdrive mode   Adam Ford
• [PATCH V4 0/7] Migrate IMX8, IMX8M and IMX9 to use imx8_cpu   Adam Ford
• [PATCH V4 1/7] imx: imx9: Imply IMX_TMU   Adam Ford
• [PATCH V4 2/7] cpu: imx8_cpu: Expand get_imx_type_str list of supported CPUs   Adam Ford
• [PATCH V4 3/7] imx: imx8m: Imply IMX_TMU   Adam Ford
• [PATCH V4 4/7] cpu: imx8_cpu: Print Speed grade if IMX_TMU.   Adam Ford
• [PATCH V4 5/7] imx: imx8m: Imply CPU_IMX by default   Adam Ford
• [PATCH V4 6/7] imx: imx8: Imply CPU_IMX by default   Adam Ford
• [PATCH V4 7/7] imx: imx9: Imply CPU_IMX by default   Adam Ford
• [PATCH V4 4/7] cpu: imx8_cpu: Print Speed grade if IMX_TMU.   Adam Ford
• [PATCH V4 4/7] cpu: imx8_cpu: Print Speed grade if IMX_TMU.   Adam Ford
• [PATCH V4 4/7] cpu: imx8_cpu: Print Speed grade if IMX_TMU.   Adam Ford
• [PATCH v5 07/12] clk: imx8mp: Add media related clocks   Adam Ford
• [PATCH 0/5] common: clean up usage of structure jmp_buf_data   Jerome Forissier
• [PATCH v2 0/3] Static initcalls   Jerome Forissier
• [PATCH 1/5] sandbox: remove linux/types.h dependency in setjmp.h   Jerome Forissier
• [PATCH 2/5] arm: include asm-generic/int-ll64.h in setjmp.h   Jerome Forissier
• [PATCH 3/5] common: clean up setjmp.h   Jerome Forissier
• [PATCH 4/5] efi_loader: Clean up usage of structure jmp_buf_data   Jerome Forissier
• [PATCH 5/5] arm: use type jmp_buf instead of struct jmp_buf_data   Jerome Forissier
• [PATCH v3 00/14] Uthreads   Jerome Forissier
• [PATCH v3 01/14] arch: introduce initjmp() and Kconfig symbol HAVE_INITJMP   Jerome Forissier
• [PATCH v3 02/14] arm: add initjmp()   Jerome Forissier
• [PATCH v3 03/14] riscv: add initjmp()   Jerome Forissier
• [PATCH v3 04/14] sandbox: add initjmp()   Jerome Forissier
• [PATCH v3 05/14] test: lib: add initjmp() test   Jerome Forissier
• [PATCH v3 06/14] uthread: add cooperative multi-tasking interface   Jerome Forissier
• [PATCH v3 07/14] cyclic: invoke uthread_schedule() from schedule()   Jerome Forissier
• [PATCH v3 08/14] lib: time: hook uthread_schedule() into udelay()   Jerome Forissier
• [PATCH v3 09/14] test: lib: add uthread test   Jerome Forissier
• [PATCH v3 10/14] dm: usb: move bus initialization into new static function usb_init_bus()   Jerome Forissier
• [PATCH v3 11/14] dm: usb: initialize and scan multiple buses simultaneously with uthread   Jerome Forissier
• [PATCH v3 12/14] cmd: add spawn and wait commands   Jerome Forissier
• [PATCH v3 13/14] test: cmd: add test for spawn and wait commands   Jerome Forissier
• [PATCH v3 14/14] MAINTAINERS: add UTHREAD   Jerome Forissier
• [PATCH 1/5] net: lwip: extend wget to support CA (root) certificates   Jerome Forissier
• [PATCH 2/5] lwip: tls: enforce checking of server certificates based on CA availability   Jerome Forissier
• [PATCH 4/5] net: lwip: add support for built-in root certificates   Jerome Forissier
• [PATCH v2 0/6] net: lwip: root certificates   Jerome Forissier
• [PATCH v2 1/6] net: lwip: extend wget to support CA (root) certificates   Jerome Forissier
• [PATCH v2 2/6] lwip: tls: enforce checking of server certificates based on CA availability   Jerome Forissier
• [PATCH v2 3/6] lwip: tls: warn when no CA exists amd log certificate validation errors   Jerome Forissier
• [PATCH v2 4/6] net: lwip: add support for built-in root certificates   Jerome Forissier
• [PATCH v2 5/6] doc: cmd: wget: document cacert subcommand   Jerome Forissier
• [PATCH v2 6/6] configs: qemu_arm64_lwip_defconfig: enable WGET_CACERT   Jerome Forissier
• [PATCH v2 1/6] net: lwip: extend wget to support CA (root) certificates   Jerome Forissier
• [PATCH v3 08/14] lib: time: hook uthread_schedule() into udelay()   Jerome Forissier
• [PATCH 0/3] net: lwip: map struct udevice to struct netif   Jerome Forissier
• [PATCH 1/3] dm: core: add 'netif' field to struct udevice for NET_LWIP   Jerome Forissier
• [PATCH 2/3] net: lwip: save struct netif in struct udevice   Jerome Forissier
• [PATCH 3/3] net: lwip: remove net_lwip_remove_netif()   Jerome Forissier
• [PATCH 0/2] net: lwip: rename output function, add packet dump   Jerome Forissier
• [PATCH 1/2] net: lwip: rename linkoutput() as net_lwip_tx()   Jerome Forissier
• [PATCH 2/2] net: lwip: add CONFIG_LWIP_DEBUG_RXTX   Jerome Forissier
• [PATCH 0/5] net: lwip: root certificates   Jerome Forissier
• [PATCH v2 4/6] net: lwip: add support for built-in root certificates   Jerome Forissier
• [PATCH v2 1/6] net: lwip: extend wget to support CA (root) certificates   Jerome Forissier
• [PATCH v2 1/6] net: lwip: extend wget to support CA (root) certificates   Jerome Forissier
• [PATCH v2 4/6] net: lwip: add support for built-in root certificates   Jerome Forissier
• [PATCH v2 4/6] net: lwip: add support for built-in root certificates   Jerome Forissier
• [PATCH v2 4/6] net: lwip: add support for built-in root certificates   Jerome Forissier
• [PATCH] cmd: Kconfig: Fix submenu for network commands   Jerome Forissier
• Please pull net-next-20250310   Jerome Forissier
• [PATCH 1/3] fastboot: lift restrictions on !NET_LWIP for USB   Jerome Forissier
• [PATCH 2/3] net: lwip: remove superfluous newline at tftp help text   Jerome Forissier
• [PATCH 0/5] net: lwip: root certificates   Jerome Forissier
• [PATCH] net: lwip: do_ping() should return CMD_RET_FAILURE when no device   Jerome Forissier
• [PATCH 00/12] lwIP sandbox tests   Jerome Forissier
• [PATCH 01/12] net: lwip: do_ping() should return CMD_RET_FAILURE when no device   Jerome Forissier
• [PATCH 02/12] net: lwip: fix initialization sequence before a command   Jerome Forissier
• [PATCH 03/12] net: lwip: provide net_start_again()   Jerome Forissier
• [PATCH 04/12] net: lwip: add restart support to ping   Jerome Forissier
• [PATCH 05/12] net: lwip: use timer_early_get_count() when CONFIG_SANDBOX_TIMER=y   Jerome Forissier
• [PATCH 06/12] drivers: net: sandbox: add support for NET_LWIP   Jerome Forissier
• [PATCH 07/12] sandbox: provide static IP addresses for eth{2, 3, 5, 6, 7}   Jerome Forissier
• [PATCH 08/12] net: ping: make do_ping() available via <net.h>   Jerome Forissier
• [PATCH 09/12] test: dm: eth, dsa: update tests for NET_LWIP   Jerome Forissier
• [PATCH 10/12] net: lwip: allow DM_DSA=y when NET_LWIP=y   Jerome Forissier
• [PATCH 11/12] configs: add sandbox64_lwip_defconfig   Jerome Forissier
• [PATCH 12/12] CI: add sandbox64_lwip   Jerome Forissier
• [PATCH 0/5] net: lwip: root certificates   Jerome Forissier
• [PATCH v4 00/14] Uthreads   Jerome Forissier
• [PATCH v4 01/14] arch: introduce initjmp() and Kconfig symbol HAVE_INITJMP   Jerome Forissier
• [PATCH v4 02/14] arm: add initjmp()   Jerome Forissier
• [PATCH v4 03/14] riscv: add initjmp()   Jerome Forissier
• [PATCH v4 04/14] sandbox: add initjmp()   Jerome Forissier
• [PATCH v4 05/14] test: lib: add initjmp() test   Jerome Forissier
• [PATCH v4 06/14] uthread: add cooperative multi-tasking interface   Jerome Forissier
• [PATCH v4 07/14] cyclic: invoke uthread_schedule() from schedule()   Jerome Forissier
• [PATCH v4 08/14] lib: time: hook uthread_schedule() into udelay()   Jerome Forissier
• [PATCH v4 09/14] test: lib: add uthread test   Jerome Forissier
• [PATCH v4 10/14] dm: usb: move bus initialization into new static function usb_init_bus()   Jerome Forissier
• [PATCH v4 11/14] dm: usb: initialize and scan multiple buses simultaneously with uthread   Jerome Forissier
• [PATCH v4 12/14] cmd: add spawn and wait commands   Jerome Forissier
• [PATCH v4 13/14] test: cmd: add test for spawn and wait commands   Jerome Forissier
• [PATCH v4 14/14] MAINTAINERS: add UTHREAD   Jerome Forissier
• [PATCH v4 02/14] arm: add initjmp()   Jerome Forissier
• [PATCH v4 10/14] dm: usb: move bus initialization into new static function usb_init_bus()   Jerome Forissier
• [PATCH] net: remove commented out line   Jerome Forissier
• [PATCH] net: lwip: Remove error print on failed tx   Jerome Forissier
• Please pull net-20250314   Jerome Forissier
• [PATCH v4 12/14] cmd: add spawn and wait commands   Jerome Forissier
• [PATCH v5 00/16] Uthreads   Jerome Forissier
• [PATCH v5 01/16] arch: introduce initjmp() and Kconfig symbol HAVE_INITJMP   Jerome Forissier
• [PATCH v5 02/16] arm: add initjmp()   Jerome Forissier
• [PATCH v5 03/16] riscv: add initjmp()   Jerome Forissier
• [PATCH v5 04/16] sandbox: add initjmp()   Jerome Forissier
• [PATCH v5 05/16] test: lib: add initjmp() test   Jerome Forissier
• [PATCH v5 06/16] uthread: add cooperative multi-tasking interface   Jerome Forissier
• [PATCH v5 07/16] uthread: add uthread_mutex   Jerome Forissier
• [PATCH v5 08/16] cyclic: invoke uthread_schedule() from schedule()   Jerome Forissier
• [PATCH v5 09/16] lib: time: hook uthread_schedule() into udelay()   Jerome Forissier
• [PATCH v5 10/16] test: lib: add uthread test   Jerome Forissier
• [PATCH v5 11/16] test: lib: add uthread_mutex test   Jerome Forissier
• [PATCH v5 12/16] dm: usb: move bus initialization into new static function usb_init_bus()   Jerome Forissier
• [PATCH v5 13/16] dm: usb: initialize and scan multiple buses simultaneously with uthread   Jerome Forissier
• [PATCH v5 14/16] cmd: add spawn and wait commands   Jerome Forissier
• [PATCH v5 15/16] test: cmd: add test for spawn and wait commands   Jerome Forissier
• [PATCH v5 16/16] MAINTAINERS: add UTHREAD   Jerome Forissier
• [PATCH 00/12] lwIP sandbox tests   Jerome Forissier
• [PATCH] configs: am68_sk_r5: Enable AVS config   Neha Malcom Francis
• [PATCH v2 0/2] Change DRAM message and add RAM doc   Neha Malcom Francis
• [PATCH v2 1/2] board_f: Modify DRAM message   Neha Malcom Francis
• [PATCH v2 2/2] doc: memory: Add documentation for system RAM   Neha Malcom Francis
• [PATCH] arm: mach-k3: k3-ddr.h: Include spl.h   Neha Malcom Francis
• [PATCH 1/3] mux: Kconfig: Add Kconfig options for MUX_MMIO   Neha Malcom Francis
• [PATCH 1/3] mux: Kconfig: Add Kconfig options for MUX_MMIO   Neha Malcom Francis
• [PATCH v3 0/3] Add support for K3 BIST   Neha Malcom Francis
• [PATCH v3 1/3] drivers: misc: k3_bist: Add K3 BIST driver   Neha Malcom Francis
• [PATCH v3 2/3] arm: mach-k3: j784s4_init: Trigger LBIST and PBIST on MAIN R5 2_0   Neha Malcom Francis
• [PATCH v3 3/3] DONOTMERGE: arm: dts: k3-j784s4-main: Add PBIST_14 node   Neha Malcom Francis
• [PATCH] binman: Fix a typo in elf.py   Neha Malcom Francis
• [PATCH v2 0/4] USB-PD TCPM improvements   Nicolas Frattaroli
• [PATCH v3 0/6] lmb: miscellaneous fixes and improvements   Sughosh Ganu
• [PATCH v3 1/6] lmb: check if a region can be reserved by lmb_reserve()   Sughosh Ganu
• [PATCH v3 2/6] lmb: handle scenario of encompassing overlap   Sughosh Ganu
• [PATCH v3 3/6] lmb: check for a region's coalescing with all existing regions   Sughosh Ganu
• [PATCH v3 4/6] lmb: remove superfluous address overlap check from lmb_add_region_flags()   Sughosh Ganu
• [PATCH v3 5/6] lmb: use a common function to check if regions overlap or are adjacent   Sughosh Ganu
• [PATCH v3 6/6] lmb: optimise the lmb allocation functions   Sughosh Ganu
• [PATCH] wget: check return value of store_block()   Sughosh Ganu
• [PATCH] wget: check return value of store_block()   Sughosh Ganu
• boottime->efi_allocate_pages() returning EFI_NOT_FOUND   Sughosh Ganu
• [PATCH v6 6/6] blkmap: pass information on ISO image to the OS   Sughosh Ganu
• [PATCH v7 0/8] Add pmem node for preserving distro ISO's   Sughosh Ganu
• [PATCH v7 1/8] efi_loader: remove unused code from copy_fdt()   Sughosh Ganu
• [PATCH v7 2/8] efi_loader: install device-tree on configuration table on every invocation   Sughosh Ganu
• [PATCH v7 3/8] fdt: add support for adding pmem nodes   Sughosh Ganu
• [PATCH v7 4/8] efi_loader: add a function to remove memory from the EFI map   Sughosh Ganu
• [PATCH v7 5/8] efi_loader: preserve installer images in pmem   Sughosh Ganu
• [PATCH v7 6/8] blkmap: store type of blkmap slice in corresponding structure   Sughosh Ganu
• [PATCH v7 7/8] blkmap: add an attribute to preserve the mem mapping   Sughosh Ganu
• [PATCH v7 8/8] blkmap: pass information on ISO image to the OS   Sughosh Ganu
• [PATCH v7 2/8] efi_loader: install device-tree on configuration table on every invocation   Sughosh Ganu
• [PATCH v8 0/8] Add pmem node for preserving distro ISO's   Sughosh Ganu
• [PATCH v8 1/8] efi_loader: remove unused code from copy_fdt()   Sughosh Ganu
• [PATCH v8 2/8] efi_loader: install device-tree on configuration table on every invocation   Sughosh Ganu
• [PATCH v8 3/8] fdt: add support for adding pmem nodes   Sughosh Ganu
• [PATCH v8 4/8] efi_loader: add a function to remove memory from the EFI map   Sughosh Ganu
• [PATCH v8 5/8] efi_loader: preserve installer images in pmem   Sughosh Ganu
• [PATCH v8 6/8] blkmap: store type of blkmap slice in corresponding structure   Sughosh Ganu
• [PATCH v8 7/8] blkmap: add an attribute to preserve the mem mapping   Sughosh Ganu
• [PATCH v8 8/8] blkmap: pass information on ISO image to the OS   Sughosh Ganu
• [PATCH v8 4/8] efi_loader: add a function to remove memory from the EFI map   Sughosh Ganu
• [PATCH v8 2/8] efi_loader: install device-tree on configuration table on every invocation   Sughosh Ganu
• [PATCH v8 3/8] fdt: add support for adding pmem nodes   Sughosh Ganu
• [PATCH v8 5/8] efi_loader: preserve installer images in pmem   Sughosh Ganu
• [PATCH v8 6/8] blkmap: store type of blkmap slice in corresponding structure   Sughosh Ganu
• [PATCH v8 7/8] blkmap: add an attribute to preserve the mem mapping   Sughosh Ganu
• [PATCH v8 8/8] blkmap: pass information on ISO image to the OS   Sughosh Ganu
• [PATCH v8 8/8] blkmap: pass information on ISO image to the OS   Sughosh Ganu
• [PATCH v9 0/8] Add pmem node for preserving distro ISO's   Sughosh Ganu
• [PATCH v9 1/8] efi_loader: remove unused code from copy_fdt()   Sughosh Ganu
• [PATCH v9 2/8] efi_loader: install device-tree on configuration table on every invocation   Sughosh Ganu
• [PATCH v9 3/8] fdt: add support for adding pmem nodes   Sughosh Ganu
• [PATCH v9 4/8] efi_loader: allow for removal of memory from the EFI map   Sughosh Ganu
• [PATCH v9 5/8] efi_loader: remove memory occupied by a ramdisk from EFI memory map   Sughosh Ganu
• [PATCH v9 6/8] blkmap: store type of blkmap slice in corresponding structure   Sughosh Ganu
• [PATCH v9 7/8] blkmap: add an attribute to preserve the mem mapping   Sughosh Ganu
• [PATCH v9 8/8] blkmap: pass information on ISO image to the OS   Sughosh Ganu
• [PATCH] lmb: change the return code on lmb_alloc_addr()   Sughosh Ganu
• [RFC PATCH] cmd: fwu: Dump custom fields from mdata structure   Sughosh Ganu
• [PATCH] cmd: cls: do not repeat clearing of console   Sughosh Ganu
• [RFC PATCH] cmd: fwu: Dump custom fields from mdata structure   Sughosh Ganu
• [RFC PATCH] cmd: fwu: Dump custom fields from mdata structure   Sughosh Ganu
• [PATCH v9 2/8] efi_loader: install device-tree on configuration table on every invocation   Sughosh Ganu
• [PATCH] test: lmb: fix the lmb_alloc_addr() based test cases   Sughosh Ganu
• [PATCH] arm: mediatek: remove wmcpu-reserved at 50000000 node from mt7987 dts   Weijie Gao
• [PATCH 1/2] pwm: mediatek: add pwm support for MediaTek MT7987 SoC   Weijie Gao
• [PATCH 2/2] arm: dts: mediatek: disable fan node for mt7987   Weijie Gao
• [PATCH v2 1/8] dt-bindings: clk: define additional PMC clocks   Sumit Garg
• [PATCH v3 1/8] dt-bindings: clock: rename at91.h to at91-pmc-status.h   Sumit Garg
• [PATCH v3 1/8] dt-bindings: clock: rename at91.h to at91-pmc-status.h   Sumit Garg
• [PATCH 00/19] am62: IO+DDR resume support   Sumit Garg
• [PATCH 2/5] mach-stm32: add multifunction timer driver support   Fabrice Gasnier
• [PATCH 3/5] pwm: stm32: add driver to support pwm with timer   Fabrice Gasnier
• [PATCH v2 2/4] pwm: stm32: add driver to support pwm with timer   Fabrice Gasnier
• [PATCH v2 4/4] ARM: dts: stm32: Add TIMERS inverted PWM channel 3 on STM32MP135F-DK   Fabrice Gasnier
• [PATCH] net: am65-cpsw: cpsw_mdio: fix typo in error message   Richard Genoud
• [PATCH 0/7] binman: Check code-coverage requirements   Simon Glass
• [PATCH 1/7] binman: Exclude dist-packages and site-packages   Simon Glass
• [PATCH 2/7] binman: Drop GetRootSkipAtStart()   Simon Glass
• [PATCH 3/7] binman: fit: Drop unused code   Simon Glass
• [PATCH 4/7] binman: Drop algo check in CheckSetHashValue()   Simon Glass
• [PATCH 5/7] binman: Workaround lz4 cli padding in test cases   Simon Glass
• [PATCH 6/7] binman: Work around missing test coverage   Simon Glass
• [PATCH 7/7] CI: Run code-coverage test for Binman   Simon Glass
• [PATCH 0/7] binman: Check code-coverage requirements   Simon Glass
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Simon Glass
• [PATCH v2 2/5] samsung: snow: Use BLOBLIST_FIXED   Simon Glass
• [PATCH v4 05/12] power-domain: Add refcounting   Simon Glass
• [PATCH v2 12/14] dm: usb: initialize and scan multiple buses simultaneously with uthread   Simon Glass
• [PATCH v2 14/14] test: dm: add test for spawn and wait commands   Simon Glass
• [PATCH 0/7] binman: Check code-coverage requirements   Simon Glass
• [PATCH 0/8] membuff: Add tests and update to support a flag for empty/full   Simon Glass
• xPL Proposal   Simon Glass
• [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
• [PATCH 0/7] binman: Check code-coverage requirements   Simon Glass
• [PATCH 8/8] membuf: Support a flag for being full   Simon Glass
• [PATCH 7/8] membuf: Minor code-style improvements   Simon Glass
• [PATCH 6/8] membuf: Add some tests   Simon Glass
• [PATCH 5/8] membuf: Correct implementation of membuf_dispose()   Simon Glass
• [PATCH 4/8] membuf: Include stdbool   Simon Glass
• [PATCH 3/8] membuf: Rename struct   Simon Glass
• [PATCH 1/8] membuff: Rename functions to have membuf_ prefix   Simon Glass
• [PATCH 0/5] net: lwip: root certificates   Simon Glass
• [PATCH v3 1/4] video: bridge-uclass: add get_display_timing ops   Simon Glass
• [PATCH v3 2/4] video: bridge-uclass: add inline fallbacks of video bridge functions   Simon Glass
• [PATCH v3 3/4] video: bridge: add transparent LVDS de/encoder bridge   Simon Glass
• [PATCH v3 4/4] test: dm: add video bridge tests   Simon Glass
• [PATCH 0/8] membuff: Add tests and update to support a flag for empty/full   Simon Glass
• [PATCH v4 00/29] arm: Support building as an EFI app   Simon Glass
• [RFC PATCH 0/2 v1] Propagate bootph* property to all parent nodes   Simon Glass
• [PATCH v2 1/3] binman: build_from_git: Add argument specifying branch   Simon Glass
• [PATCH v2 2/3] binman: build_from_git: Add optional make path inside git repo   Simon Glass
• [PATCH v2 3/3] binman: cst: Build from source   Simon Glass
• [RFC PATCH] Kbuild: Always use $(PHASE_)   Simon Glass
• [PATCH v2 6/6] binman: Authenticate the image when testing the preload signature   Simon Glass
• xPL Proposal   Simon Glass
• [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
• (subset) [u-boot-test-hooks PATCH 1/3] labgrid: Deal with strange Python error   Simon Glass
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Simon Glass
• xPL Proposal   Simon Glass
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Simon Glass
• [PATCH v5 01/29] x86: Make do_zboot_states() static   Simon Glass
• [PATCH v5 02/29] x86: Rename zboot_run() to zboot_run_args()   Simon Glass
• [PATCH v5 03/29] x86: Drop duplicate definition of zimage_dump()   Simon Glass
• [PATCH v5 04/29] x86: Move x86 zboot state into struct bootm_info   Simon Glass
• [PATCH v5 05/29] x86: Rename state to bmi   Simon Glass
• [PATCH v5 06/29] x86: Move the bootm state for zimage into cmd/   Simon Glass
• [PATCH v5 07/29] bootstd: Correct display of kernel version   Simon Glass
• [PATCH v5 08/29] x86: Drop the unnecessary base_ptr argument to zboot_dump()   Simon Glass
• [PATCH v5 09/29] boot: Use strlcpy() in label_boot()   Simon Glass
• [PATCH v5 10/29] boot: Split pxe label_boot() into two parts   Simon Glass
• [PATCH v5 11/29] boot: Split pxe label_run_boot() into two parts   Simon Glass
• [PATCH v5 12/29] boot: Pass just the FDT argument to label_process_fdt()   Simon Glass
• [PATCH v5 13/29] bootm: Allow building bootm.c without CONFIG_SYS_BOOTM_LEN   Simon Glass
• [PATCH v5 14/29] boot: Convert IMAGE_FORMAT into an enum   Simon Glass
• [PATCH v5 15/29] boot: arm: riscv: sandbox: Add a format for the booti file   Simon Glass
• [PATCH v5 16/29] boot: Support booti format in bootm   Simon Glass
• [PATCH v5 17/29] boot: Support compressed booti images in bootm   Simon Glass
• [PATCH v5 18/29] boot: pxe: Use bootm_...() functions where possible   Simon Glass
• [PATCH v5 19/29] pxe_utils: Simplify default fdt in label_run_boot()   Simon Glass
• [PATCH v5 20/29] boot: pxe: Refactor label_run_boot() to avoid cmdline   Simon Glass
• [PATCH v5 21/29] net: Keep the bootstage functions together   Simon Glass
• [PATCH v5 22/29] net: Tidy up the comments to parse_args()   Simon Glass
• [PATCH v5 23/29] net: Simplify parse_args()   Simon Glass
• [PATCH v5 24/29] net: Return the load address from parse_args()   Simon Glass
• [PATCH v5 25/29] net: Return the address and size from parse_addr_size()   Simon Glass
• [PATCH v5 26/29] net: Return the size from parse_args()   Simon Glass
• [PATCH v5 27/29] net: Refactor part of netboot_common() into a function   Simon Glass
• [PATCH v5 28/29] net: Drop #ifdef in parse_args()   Simon Glass
• [PATCH v5 29/29] net: Provide a function to run network operations   Simon Glass
• [PATCH 05/12] arm: Support running U-Boot as a coreboot payload on ARM64   Simon Glass
• Halting auto-boot process in the U-Boot shell https://lore.kernel.org/u-boot/20220614060203.33600-1-heinrich.schuchardt at canonical.com/   Simon Glass
• [RFC PATCH] Kbuild: Always use $(PHASE_)   Simon Glass
• [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
• [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Simon Glass
• [PATCH] efi_loader: Install the ACPI table from the bloblist   Simon Glass
• [PATCH v3 00/30] upl: Prerequite patches for updated spec   Simon Glass
• [PATCH v4 00/47] x86: Improve operation under QEMU   Simon Glass
• [PATCH v4 01/47] boot: Correct ramdisk address   Simon Glass
• [PATCH v4 02/47] sandbox: Correct a typo in mapmem   Simon Glass
• [PATCH v4 03/47] x86: Expand x86_64 early memory   Simon Glass
• [PATCH v4 04/47] x86: qemu: Switch to bochs display   Simon Glass
• [PATCH v4 05/47] x86: qemu: Enable dhrystone   Simon Glass
• [PATCH v4 06/47] x86: qemu: Avoid accessing BSS too early   Simon Glass
• [PATCH v4 07/47] x86: Drop mpspec from the SPL build   Simon Glass
• [PATCH v4 08/47] x86: Add some log categories   Simon Glass
• [PATCH v4 09/47] x86: Drop use of CONFIG_REALMODE_DEBUG   Simon Glass
• [PATCH v4 10/47] x86: Avoid clearing the VESA display   Simon Glass
• [PATCH v4 11/47] x86: Add 64-bit entries to the GDT   Simon Glass
• [PATCH v4 12/47] x86: Use defines for the cache flags   Simon Glass
• [PATCH v4 13/47] x86: spl: Drop duplicate CPU init   Simon Glass
• [PATCH v4 14/47] x86: Drop the message about features missing in 64-bit   Simon Glass
• [PATCH v4 15/47] x86: Include stdbool.h in interrupt header   Simon Glass
• [PATCH v4 16/47] x86: Tidy up the GDT size in start/16.S   Simon Glass
• [PATCH v4 17/47] x86: Disable paging before changing to long mode   Simon Glass
• [PATCH v4 18/47] x86: Use the same GDT when jumping to long mode   Simon Glass
• [PATCH v4 19/47] x86: Use a simple jump into long mode   Simon Glass
• [PATCH v4 20/47] x86: Rename the _D dirty flag   Simon Glass
• [PATCH v4 21/47] x86: Support CPU functions in long mode   Simon Glass
• [PATCH v4 22/47] x86: Add functions to convert between mtrr size and mask   Simon Glass
• [PATCH v4 23/47] x86: Update mtrr command to support 64-bit values   Simon Glass
• [PATCH v4 24/47] x86: Update cpuid_eax et al to work on amd64   Simon Glass
• [PATCH v4 25/47] x86: Correct msr operation on amd64   Simon Glass
• [PATCH v4 26/47] x86: Allow adding non-aligned size for MTRR   Simon Glass
• [PATCH v4 27/47] x86: emulation: Set an MTRR for the RAM   Simon Glass
• [PATCH v4 28/47] x86: qemu: Support environment and cat command   Simon Glass
• [PATCH v4 29/47] test/py: Correct sizing of created disks   Simon Glass
• [PATCH v4 30/47] test/py: Add a helper to send characters   Simon Glass
• [PATCH v4 31/47] test/py: Allow tests to be filtered by role   Simon Glass
• [PATCH v4 32/47] x86: e820: Add a function to dump the e820 table   Simon Glass
• [PATCH v4 33/47] x86: Add a new API for e820   Simon Glass
• [PATCH v4 34/47] x86: qemu: Use the new e820 API   Simon Glass
• [PATCH v4 35/47] x86: emulation: Support BLOBLIST_TABLES properly   Simon Glass
• [PATCH v4 36/47] x86: Support a 64-bit ramdisk address   Simon Glass
• [PATCH v4 37/47] acpi: Mark struct acpi_rsdp as packed   Simon Glass
• [PATCH v4 38/47] boot: Consider non-bootable partitions   Simon Glass
• [PATCH v4 39/47] boot: Handle running out of labels   Simon Glass
• [PATCH v4 40/47] boot: Support IO UARTs for earlycon and console   Simon Glass
• [PATCH v4 41/47] sandbox: acpi: Avoid a warning about FADT   Simon Glass
• [PATCH v4 42/47] sandbox: acpi: Correct mapping in FADT   Simon Glass
• [PATCH v4 43/47] acpi: Add a checksum to the DMAR table   Simon Glass
• [PATCH v4 44/47] test: acpi: Correct memory leaks   Simon Glass
• [PATCH v4 45/47] acpi: Support checking checksums   Simon Glass
• [PATCH v4 46/47] RFC: test/py: Deal with timeouts   Simon Glass
• [PATCH v4 47/47] test: Add a test for booting Ubuntu 24.04   Simon Glass
• [PATCH 0/8] membuff: Add tests and update to support a flag for empty/full   Simon Glass
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Simon Glass
• [PATCH] efi_loader: Install the ACPI table from the bloblist   Simon Glass
• [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Simon Glass
• [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
• [PATCH 2/2] Makefile.lib: Set xPL build related defines for DTB build   Simon Glass
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Simon Glass
• [PATCH] checkpatch.pl: Report an error for CONFIG_xPL_BUILD in device trees   Simon Glass
• [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Simon Glass
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Simon Glass
• [PATCH 0/5] net: lwip: root certificates   Simon Glass
• [PATCH v2 1/1] sandbox: remap memory load addresses   Simon Glass
• [PATCH] x86: spl: Add support for NVMe boot device   Simon Glass
• [PATCH v5 06/29] x86: Move the bootm state for zimage into cmd/   Simon Glass
• [PATCH v5 07/29] bootstd: Correct display of kernel version   Simon Glass
• [PATCH v5 15/29] boot: arm: riscv: sandbox: Add a format for the booti file   Simon Glass
• [PATCH v4 46/47] RFC: test/py: Deal with timeouts   Simon Glass
• [PATCH v4 30/47] test/py: Add a helper to send characters   Simon Glass
• [PATCH v4 00/47] x86: Improve operation under QEMU   Simon Glass
• [PATCH 1/1] drivers: fpga: Add partial reconfiguration console commands   Simon Glass
• [PATCH v2 27/28] RFC: test/py: Deal with timeouts   Simon Glass
• [PATCH 2/2] u_boot_pylib: Clean up pylint warnings in gitutil.py   Simon Glass
• Please pull u-boot-dm   Simon Glass
• [PATCH] arch/x86: Add 64-bit U-Boot configuration without SPL   Simon Glass
• [PATCH 0/5] net: lwip: root certificates   Simon Glass
• [PATCH v4 00/47] x86: Improve operation under QEMU   Simon Glass
• [PATCH] disable mail for swarren   Simon Glass
• [PATCH v5 00/46] x86: Improve operation under QEMU   Simon Glass
• [PATCH v5 01/46] boot: Correct ramdisk address   Simon Glass
• [PATCH v5 02/46] sandbox: Correct a typo in mapmem   Simon Glass
• [PATCH v5 03/46] x86: Expand x86_64 early memory   Simon Glass
• [PATCH v5 04/46] x86: qemu: Switch to bochs display   Simon Glass
• [PATCH v5 05/46] x86: qemu: Enable dhrystone   Simon Glass
• [PATCH v5 06/46] x86: qemu: Avoid accessing BSS too early   Simon Glass
• [PATCH v5 07/46] x86: Drop mpspec from the SPL build   Simon Glass
• [PATCH v5 08/46] x86: Add some log categories   Simon Glass
• [PATCH v5 09/46] x86: Drop use of CONFIG_REALMODE_DEBUG   Simon Glass
• [PATCH v5 10/46] x86: Avoid clearing the VESA display   Simon Glass
• [PATCH v5 11/46] x86: Add 64-bit entries to the GDT   Simon Glass
• [PATCH v5 12/46] x86: Use defines for the cache flags   Simon Glass
• [PATCH v5 13/46] x86: spl: Drop duplicate CPU init   Simon Glass
• [PATCH v5 14/46] x86: Drop the message about features missing in 64-bit   Simon Glass
• [PATCH v5 15/46] x86: Include stdbool.h in interrupt header   Simon Glass
• [PATCH v5 16/46] x86: Tidy up the GDT size in start/16.S   Simon Glass
• [PATCH v5 17/46] x86: Disable paging before changing to long mode   Simon Glass
• [PATCH v5 18/46] x86: Use the same GDT when jumping to long mode   Simon Glass
• [PATCH v5 19/46] x86: Use a simple jump into long mode   Simon Glass
• [PATCH v5 20/46] x86: Rename the _D dirty flag   Simon Glass
• [PATCH v5 21/46] x86: Support CPU functions in long mode   Simon Glass
• [PATCH v5 22/46] x86: Add functions to convert between mtrr size and mask   Simon Glass
• [PATCH v5 23/46] x86: Update mtrr command to support 64-bit values   Simon Glass
• [PATCH v5 24/46] x86: Update cpuid_eax et al to work on amd64   Simon Glass
• [PATCH v5 25/46] x86: Correct msr operation on amd64   Simon Glass
• [PATCH v5 26/46] x86: Allow adding non-aligned size for MTRR   Simon Glass
• [PATCH v5 27/46] x86: emulation: Set an MTRR for the RAM   Simon Glass
• [PATCH v5 28/46] x86: qemu: Support environment and cat command   Simon Glass
• [PATCH v5 29/46] test/py: Correct sizing of created disks   Simon Glass
• [PATCH v5 30/46] test/py: Add a helper to send characters   Simon Glass
• [PATCH v5 31/46] test/py: Allow tests to be filtered by role   Simon Glass
• [PATCH v5 32/46] x86: e820: Add a function to dump the e820 table   Simon Glass
• [PATCH v5 33/46] x86: Add a new API for e820   Simon Glass
• [PATCH v5 34/46] x86: qemu: Use the new e820 API   Simon Glass
• [PATCH v5 35/46] x86: emulation: Support BLOBLIST_TABLES properly   Simon Glass
• [PATCH v5 36/46] x86: Support a 64-bit ramdisk address   Simon Glass
• [PATCH v5 37/46] acpi: Mark struct acpi_rsdp as packed   Simon Glass
• [PATCH v5 38/46] boot: Consider non-bootable partitions   Simon Glass
• [PATCH v5 39/46] boot: Handle running out of labels   Simon Glass
• [PATCH v5 40/46] boot: Support IO UARTs for earlycon and console   Simon Glass
• [PATCH v5 41/46] sandbox: acpi: Avoid a warning about FADT   Simon Glass
• [PATCH v5 42/46] sandbox: acpi: Correct mapping in FADT   Simon Glass
• [PATCH v5 43/46] acpi: Add a checksum to the DMAR table   Simon Glass
• [PATCH v5 44/46] test: acpi: Correct memory leaks   Simon Glass
• [PATCH v5 45/46] acpi: Support checking checksums   Simon Glass
• [PATCH v5 46/46] test: Add a test for booting Ubuntu 24.04   Simon Glass
• [PATCH v4 46/47] RFC: test/py: Deal with timeouts   Simon Glass
• [PATCH v4 00/47] x86: Improve operation under QEMU   Simon Glass
• [PATCH 2/2] u_boot_pylib: Clean up pylint warnings in gitutil.py   Simon Glass
• [PATCH 2/2] u_boot_pylib: Clean up pylint warnings in gitutil.py   Simon Glass
• [PATCH v2] u_boot_pylib: Clean up pylint warnings in gitutil.py   Simon Glass
• [PATCH v4 00/47] x86: Improve operation under QEMU   Simon Glass
• [PATCH v5 07/46] x86: Drop mpspec from the SPL build   Simon Glass
• [PATCH v2 0/7] membuff: Add tests and update to support a flag for empty/full   Simon Glass
• [PATCH v2 1/7] membuff: Rename functions to have membuf_ prefix   Simon Glass
• [PATCH v2 2/7] membuff: Rename the files to membuf   Simon Glass
• [PATCH v2 3/7] membuf: Rename struct   Simon Glass
• [PATCH v2 4/7] membuf: Include stdbool   Simon Glass
• [PATCH v2 5/7] membuf: Correct implementation of membuf_dispose()   Simon Glass
• [PATCH v2 6/7] membuf: Add some tests   Simon Glass
• [PATCH v2 7/7] membuf: Minor code-style improvements   Simon Glass
• [PATCH v5 38/46] boot: Consider non-bootable partitions   Simon Glass
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Simon Glass
• [PATCH 0/6] Test improvements   Simon Glass
• [PATCH 1/6] abuf: Add a function to copy a buffer   Simon Glass
• [PATCH 2/6] abuf: Add a way to printf() into a buffer   Simon Glass
• [PATCH 3/6] test: Add a test for strim()   Simon Glass
• [PATCH 4/6] membuf: Add an easy way to set up a buffer with data   Simon Glass
• [PATCH 5/6] sandbox: Enable PHYS_64BIT for 64-bit builds   Simon Glass
• [PATCH 6/6] lib: Provide a signed version of simple_itoa()   Simon Glass
• [PATCH 00/17] bootstd: Useability improvements   Simon Glass
• [PATCH 01/17] fs: boot: Update fs_read_alloc() to use abuf   Simon Glass
• [PATCH 02/17] fs: boot: Update fs_load_alloc() to use abuf   Simon Glass
• [PATCH 03/17] fs: boot: Update bootmeth_alloc_other() to use abuf   Simon Glass
• [PATCH 04/17] bootstd: Add more debugging to bootmeth_efi   Simon Glass
• [PATCH 05/17] bootstd: Add more debugging to bootmeth_extlinux   Simon Glass
• [PATCH 06/17] bootstd: Try all bootmeths on the final partition   Simon Glass
• [PATCH 07/17] bootstd: Fully complete iteration of a uclass   Simon Glass
• [PATCH 08/17] test/py: Split out core of Fedora image into a new function   Simon Glass
• [PATCH 09/17] test/py: Add a test image for Ubuntu   Simon Glass
• [PATCH 10/17] usb: Use more useful names for block devices   Simon Glass
• [PATCH 11/17] sandbox: Use a unique name for each USB controller   Simon Glass
• [PATCH 12/17] bootstd: Tweak scanning with labels   Simon Glass
• [PATCH 13/17] bootstd: Tidy up a nested CONFIG_IS_ENABLED(BOOTSTD)   Simon Glass
• [PATCH 14/17] bootstd: Provide a command to select the bootdev order   Simon Glass
• [PATCH 15/17] bootstd: Correct the comment for bootmeth_set_order()   Simon Glass
• [PATCH 16/17] bootstd: Expand debugging in bootdev_find_in_blk()   Simon Glass
• [PATCH 17/17] bootstd: Mention FS state in bootmeth_read_bootflow()   Simon Glass
• [PATCH 00/52] expo: Various features and improvements   Simon Glass
• [PATCH 01/52] video: Make white-on-black a video-device property   Simon Glass
• [PATCH 02/52] sandbox: Select white-on-black   Simon Glass
• [PATCH 03/52] video: Add a test for font measurement   Simon Glass
• [PATCH 04/52] video: Begin support for measuring multiple lines of text   Simon Glass
• [PATCH 05/52] video: truetype: Fill in the measured line   Simon Glass
• [PATCH 06/52] video: truetype: Support newlines in the measured string   Simon Glass
• [PATCH 07/52] video: truetype: Support a limit on the width of a line   Simon Glass
• [PATCH 08/52] video: Add a way to write a partial string to the console   Simon Glass
• [PATCH 09/52] console: Support a format string for stderr output   Simon Glass
• [PATCH 10/52] test: video: Export the video-checking functions   Simon Glass
• [PATCH 11/52] video: Allow console output to be silenced   Simon Glass
• [PATCH 12/52] video: Add a function to draw a rectangle   Simon Glass
• [PATCH 13/52] expo: Add CLI context to the expo   Simon Glass
• [PATCH 14/52] expo: Add a function to poll for input   Simon Glass
• [PATCH 15/52] expo: Destroy the cedit expo when done   Simon Glass
• [PATCH 16/52] expo: Create a rendering test for cedit   Simon Glass
• [PATCH 17/52] expo: Move cedit-state fields into expo   Simon Glass
• [PATCH 18/52] expo: Test some cedit actions   Simon Glass
• [PATCH 19/52] expo: Provide access to the current menu item   Simon Glass
• [PATCH 20/52] expo: Adjust how menu items are highlighted   Simon Glass
• [PATCH 21/52] expo: Split bootflow_menu_run() into two pieces   Simon Glass
• [PATCH 22/52] expo: Split bootflow_menu_new() into two pieces   Simon Glass
• [PATCH 23/52] expo: Allow adding a single bootflow to a menu   Simon Glass
• [PATCH 24/52] expo: Rename scene_dim to scene_obj_bbox   Simon Glass
• [PATCH 25/52] expo: Rename x and y in struct scene_obj_bbox   Simon Glass
• [PATCH 26/52] expo: Use an abuf to hold strings   Simon Glass
• [PATCH 27/52] expo: Separate dimensions from the bounding box   Simon Glass
• [PATCH 28/52] expo: Make bounding-box calculation more flexible   Simon Glass
• [PATCH 29/52] expo: Support setting the size and bounds of an object   Simon Glass
• [PATCH 30/52] expo: Line up all menu objects   Simon Glass
• [PATCH 31/52] expo: Create a struct for generic text attributes   Simon Glass
• [PATCH 32/52] expo: Move text-rendering into its own function   Simon Glass
• [PATCH 33/52] expo: Tidy up scene_txt_render()   Simon Glass
• [PATCH 34/52] expo: Allow strings to be editable   Simon Glass
• [PATCH 35/52] expo: Check the screen contents after rendering   Simon Glass
• [PATCH 36/52] expo: Support rendering multiple lines of text   Simon Glass
• [PATCH 37/52] expo: Support white-on-black in the theme   Simon Glass
• [PATCH 38/52] expo: Implement a box   Simon Glass
• [PATCH 39/52] expo: Support object alignment   Simon Glass
• [PATCH 40/52] expo: Begin implementation of a text editor   Simon Glass
• [PATCH 41/52] expo: Use a simpler name for USB media   Simon Glass
• [PATCH 42/52] expo: Drop the gap between groups of menu items   Simon Glass
• [PATCH 43/52] expo: Add forward declarations to scene_internal.h   Simon Glass
• [PATCH 44/52] expo: Support highlighting menu items   Simon Glass
• [PATCH 45/52] expo: Adjust expo_poll() to avoid looping forever   Simon Glass
• [PATCH 46/52] expo: Drop the render from expo_poll()   Simon Glass
• [PATCH 47/52] expo: Provide a way to position things relative to display   Simon Glass
• [PATCH 48/52] expo: Improve the visual appearance of the menu   Simon Glass
• [PATCH 49/52] expo: Update bootflow_menu_poll() to return a sequence ID   Simon Glass
• [PATCH 50/52] expo: Split setting up the menu from adding items   Simon Glass
• [PATCH 51/52] expo: Set up menu fully in bootflow_menu_start()   Simon Glass
• [PATCH 52/52] expo: Drop the special theme code for bootflow_menu   Simon Glass
• [PATCH v5 38/46] boot: Consider non-bootable partitions   Simon Glass
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Simon Glass
• [PATCH v4 10/14] dm: usb: move bus initialization into new static function usb_init_bus()   Simon Glass
• [PATCH 6/6] lib: Provide a signed version of simple_itoa()   Simon Glass
• [PATCH 3/6] test: Add a test for strim()   Simon Glass
• [PATCH] arm64: Fix page permissions for platforms running at EL2   Simon Glass
• [PATCH 09/17] test/py: Add a test image for Ubuntu   Simon Glass
• [PATCH 6/6] lib: Provide a signed version of simple_itoa()   Simon Glass
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Simon Glass
• [PATCH 00/52] expo: Various features and improvements   Simon Glass
• [PATCH] arm64: Fix page permissions for platforms running at EL2   Simon Glass
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Simon Glass
• [PATCH 09/17] test/py: Add a test image for Ubuntu   Simon Glass
• [PATCH 6/6] lib: Provide a signed version of simple_itoa()   Simon Glass
• [PATCH 3/6] test: Add a test for strim()   Simon Glass
• [PATCH v5 38/46] boot: Consider non-bootable partitions   Simon Glass
• [PATCH v5 38/46] boot: Consider non-bootable partitions   Simon Glass
• [PATCH 00/52] expo: Various features and improvements   Simon Glass
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Simon Glass
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Simon Glass
• [PATCH 00/52] expo: Various features and improvements   Simon Glass
• [PATCH v4 00/29] arm: Support building as an EFI app   Simon Glass
• Unexpected RPi5 Behavior with Saved U-Boot Environment   Simon Glass
• [PATCH v1 2/2] drivers: scsi: Add 'erase' support   Simon Glass
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Simon Glass
• [PATCH] efi: Tidy up nits in the ARM64 EFI app   Simon Glass
• [PATCH v4 29/29] efi: arm: Add an EFI app for arm64   Simon Glass
• [PATCH v4 14/29] efi: arm: Don't do the EL2 switch when running under EFI   Simon Glass
• [PATCH v4 16/29] efi: arm: Avoid enabling caches when running under EFI   Simon Glass
• [PATCH v4 13/29] efi: lmb: Avoid access to _start   Simon Glass
• [PATCH v4 22/29] efi: arm: Drop startup code from the app   Simon Glass
• [PATCH v4 00/29] arm: Support building as an EFI app   Simon Glass
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Simon Glass
• [PATCH 1/2] bloblist: fix the overriding of fdt from bloblist   Simon Glass
• [PATCH 2/2] env: point fdt address to the fdt in a bloblist   Simon Glass
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Simon Glass
• [PATCH v5 45/46] acpi: Support checking checksums   Simon Glass
• [PATCH v4 1/1] efi_loader: expose the device-tree file name   Simon Glass
• [PATCH v2 0/1] efi: Tidy up nits in the ARM64 EFI app   Simon Glass
• [PATCH v2 1/1] efi: Tidy up nits in the ARM64 EFI app   Simon Glass
• [PATCH] binman: Fix a typo in elf.py   Simon Glass
• [PATCH] patman: Show base commit on each patch when no cover letter   Simon Glass
• [PATCH 00/52] expo: Various features and improvements   Simon Glass
• [PATCH v2 00/56] expo: Various features and improvements   Simon Glass
• [PATCH v2 01/56] video: Make white-on-black a video-device property   Simon Glass
• [PATCH v2 02/56] sandbox: Select white-on-black   Simon Glass
• [PATCH v2 03/56] video: Add a test for font measurement   Simon Glass
• [PATCH v2 04/56] video: Begin support for measuring multiple lines of text   Simon Glass
• [PATCH v2 05/56] video: truetype: Fill in the measured line   Simon Glass
• [PATCH v2 06/56] video: truetype: Support newlines in the measured string   Simon Glass
• [PATCH v2 07/56] video: truetype: Support a limit on the width of a line   Simon Glass
• [PATCH v2 08/56] video: Add a way to write a partial string to the console   Simon Glass
• [PATCH v2 09/56] console: Support a format string for stderr output   Simon Glass
• [PATCH v2 10/56] test: video: Export the video-checking functions   Simon Glass
• [PATCH v2 11/56] video: Allow console output to be silenced   Simon Glass
• [PATCH v2 12/56] video: Add a function to draw a rectangle   Simon Glass
• [PATCH v2 13/56] expo: Add CLI context to the expo   Simon Glass
• [PATCH v2 14/56] expo: Add a function to poll for input   Simon Glass
• [PATCH v2 15/56] expo: Destroy the cedit expo when done   Simon Glass
• [PATCH v2 16/56] vidconsole: Avoid kerning against an unrelated character   Simon Glass
• [PATCH v2 17/56] expo: Create a rendering test for cedit   Simon Glass
• [PATCH v2 18/56] expo: Move cedit-state fields into expo   Simon Glass
• [PATCH v2 19/56] expo: Test some cedit actions   Simon Glass
• [PATCH v2 20/56] expo: Pass in the video device for cedit_prepare()   Simon Glass
• [PATCH v2 21/56] expo: Test rendering a lineedit   Simon Glass
• [PATCH v2 22/56] expo: Provide access to the current menu item   Simon Glass
• [PATCH v2 23/56] expo: Adjust how menu items are highlighted   Simon Glass
• [PATCH v2 24/56] expo: Test editing a lineedit   Simon Glass
• [PATCH v2 25/56] expo: Split bootflow_menu_run() into two pieces   Simon Glass
• [PATCH v2 26/56] expo: Split bootflow_menu_new() into two pieces   Simon Glass
• [PATCH v2 27/56] expo: Allow adding a single bootflow to a menu   Simon Glass
• [PATCH v2 28/56] expo: Rename scene_dim to scene_obj_bbox   Simon Glass
• [PATCH v2 29/56] expo: Rename x and y in struct scene_obj_bbox   Simon Glass
• [PATCH v2 30/56] expo: Use an abuf to hold strings   Simon Glass
• [PATCH v2 31/56] expo: Separate dimensions from the bounding box   Simon Glass
• [PATCH v2 32/56] expo: Make bounding-box calculation more flexible   Simon Glass
• [PATCH v2 33/56] expo: Support setting the size and bounds of an object   Simon Glass
• [PATCH v2 34/56] expo: Line up all menu objects   Simon Glass
• [PATCH v2 35/56] expo: Create a struct for generic text attributes   Simon Glass
• [PATCH v2 36/56] expo: Move text-rendering into its own function   Simon Glass
• [PATCH v2 37/56] expo: Tidy up scene_txt_render()   Simon Glass
• [PATCH v2 38/56] expo: Allow strings to be editable   Simon Glass
• [PATCH v2 39/56] expo: Check the screen contents after rendering   Simon Glass
• [PATCH v2 40/56] expo: Support rendering multiple lines of text   Simon Glass
• [PATCH v2 41/56] expo: Support white-on-black in the theme   Simon Glass
• [PATCH v2 42/56] expo: Implement a box   Simon Glass
• [PATCH v2 43/56] expo: Support object alignment   Simon Glass
• [PATCH v2 44/56] expo: Begin implementation of a text editor   Simon Glass
• [PATCH v2 45/56] expo: Use a simpler name for USB media   Simon Glass
• [PATCH v2 46/56] expo: Drop the gap between groups of menu items   Simon Glass
• [PATCH v2 47/56] expo: Add forward declarations to scene_internal.h   Simon Glass
• [PATCH v2 48/56] expo: Support highlighting menu items   Simon Glass
• [PATCH v2 49/56] expo: Adjust expo_poll() to avoid looping forever   Simon Glass
• [PATCH v2 50/56] expo: Drop the render from expo_poll()   Simon Glass
• [PATCH v2 51/56] expo: Provide a way to position things relative to display   Simon Glass
• [PATCH v2 52/56] expo: Improve the visual appearance of the menu   Simon Glass
• [PATCH v2 53/56] expo: Update bootflow_menu_poll() to return a sequence ID   Simon Glass
• [PATCH v2 54/56] expo: Split setting up the menu from adding items   Simon Glass
• [PATCH v2 55/56] expo: Set up menu fully in bootflow_menu_start()   Simon Glass
• [PATCH v2 56/56] expo: Drop the special theme code for bootflow_menu   Simon Glass
• [PATCH 1/2] bloblist: fix the overriding of fdt from bloblist   Simon Glass
• [PATCH 1/2] bloblist: fix the overriding of fdt from bloblist   Simon Glass
• [PATCH v3 00/31] VBE serial part H: Implement VBE on Rockchip RK3399   Simon Glass
• [PATCH v3 01/31] spl: Adjust xPL symbols   Simon Glass
• [PATCH v3 02/31] spl: Allow VBE to handle xPL size   Simon Glass
• [PATCH v3 03/31] vbe: Show the margin when using SPL_RELOC   Simon Glass
• [PATCH v3 04/31] rockchip: Allow RAM init to happen in SPL on rk3399   Simon Glass
• [PATCH v3 05/31] rockchip: dts: Correct the OS for U-Boot   Simon Glass
• [PATCH v3 06/31] rockchip: dts: Factor out arch and compression   Simon Glass
• [PATCH v3 07/31] rockchip: dts: Add an fdtmap   Simon Glass
• [PATCH v3 08/31] rockchip: dts: Create a template for the FIT   Simon Glass
• [PATCH v3 09/31] rockchip: dts: Un-indent the FIT template   Simon Glass
• [PATCH v3 10/31] rockchip: dts: Use the new binman template for the SPI image too   Simon Glass
• [PATCH v3 11/31] rockchip: dts: Specify the phase in the image   Simon Glass
• [PATCH v3 12/31] rockchip: Provide a bootstd configuration   Simon Glass
• [PATCH v3 13/31] rockchip: Add SPL into the main FIT   Simon Glass
• [PATCH v3 14/31] rockchip: Include a compatible string in each configuration   Simon Glass
• [PATCH v3 15/31] rockchip: Add a template for SPL   Simon Glass
• [PATCH v3 16/31] rockchip: Add a VPL image   Simon Glass
• [PATCH v3 17/31] rockchip: Add TPL alternatives   Simon Glass
• [PATCH v3 18/31] rockchip: Update rk3399 bootph-tags for VPL   Simon Glass
• [PATCH v3 19/31] rockchip: Provide a VPL phase on rk3399   Simon Glass
• [PATCH v3 20/31] rockchip: Add symbols for spl_reloc   Simon Glass
• [PATCH v3 21/31] rockchip: rk3399: Adjust initial TPL-stack to match SPL   Simon Glass
• [PATCH v3 22/31] rockchip: Allow SPL to set up SDRAM   Simon Glass
• [PATCH v3 23/31] rockchip: Add a generic-ddr3 rk3399 board   Simon Glass
• [PATCH v3 24/31] rockchip: Add documentation for VBE   Simon Glass
• [PATCH v3 25/31] gitlab: Add an VBE board to the sjg lab   Simon Glass
• [PATCH v3 26/31] rockchip: Set the skip-at-start property correctly   Simon Glass
• [PATCH v3 27/31] vbe: Add a bootmeth driver for abrec   Simon Glass
• [PATCH v3 28/31] rockchip: Update binman image for new skip-at-start setup   Simon Glass
• [PATCH v3 29/31] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
• [PATCH v3 30/31] rockchip: Relocate bloblist at the end of the SPL phase   Simon Glass
• [PATCH v3 31/31] bloblist: Allow using a different bloblist address   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH 1/4] bloblist: Simplify bloblist init   Simon Glass
• [PATCH 2/4] fdt: Introduce OF_BLOBLIST   Simon Glass
• [PATCH 3/4] bloblist: Provide access to the FDT address   Simon Glass
• [PATCH 4/4] fdt: Obtain the FDT from bloblist without parsing it   Simon Glass
• [PATCH v3 10/31] rockchip: dts: Use the new binman template for the SPI image too   Simon Glass
• [PATCH 0/4] bloblist: fdt: Clean up the code   Simon Glass
• [PATCH v3 29/31] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Simon Glass
• [PATCH 2/2] env: point fdt address to the fdt in a bloblist   Simon Glass
• [PATCH] dtc: introduce label relative path references   Simon Glass
• [PATCH v3 19/31] rockchip: Provide a VPL phase on rk3399   Simon Glass
• [PATCH v3 19/31] rockchip: Provide a VPL phase on rk3399   Simon Glass
• [PATCH v5 38/46] boot: Consider non-bootable partitions   Simon Glass
• [PATCH 00/52] expo: Various features and improvements   Simon Glass
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Simon Glass
• [PATCH v3 1/2] CI: Move default image under global defaults   Simon Glass
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Simon Glass
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Simon Glass
• [RFC] memtest   Simon Glass
• [PATCH v2 00/56] expo: Various features and improvements   Simon Glass
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Simon Glass
• [PATCH 1/2] image-fit-sig: skip in tools build if key is missing   Daniel Golle
• [PATCH 2/2] tools/fit_check_sign: make key optional   Daniel Golle
• [PATCH 2/2] tools/fit_check_sign: make key optional   Daniel Golle
• [PATCH v2 1/2] image-fit-sig: skip in tools build if key is missing   Daniel Golle
• [PATCH v2 2/2] tools/fit_check_sign: make key optional   Daniel Golle
• [RFC] memtest   Andrew Goodbody
• undefined reference to `__stack_chk_guard' when building with sandbox_defconfig   Andrew Goodbody
• [PATCH] test/py: memtest: Fix test for non-trivial parameters   Andrew Goodbody
• [PATCH 2/2] Makefile.lib: Set xPL build related defines for DTB build   Oliver Graute
• [PATCH v7 08/19] sandbox: add SCMI clock control permissions to sandbox   Alice Guo
• [PATCH v7 19/19] Makefile: add some files to CLEAN_FILES   Alice Guo
• Invalid SPDX License Identifier for test/lib/strlcat.c   Diederik de Haas
• [PATCH] mcheck: Fix SPDX License Identifier to LGPL-2.1-or-later   Diederik de Haas
• Invalid SPDX License Identifier for test/lib/strlcat.c   Diederik de Haas
• [PATCH 2/2] tools: amlimage: Add support for GXBB eMMC header   Ferass El Hafidi
• [PATCH v1 00/11] Amlogic: ADNL and Optimus protocols support   Ferass El Hafidi
• [PATCH] RISCV: config: Remove CFG_SYS_SDRAM_BASE   Jimmy Ho
• [PATCH v3 1/8] dt-bindings: clock: rename at91.h to at91-pmc-status.h   Eugen Hristev
• [PATCH v4 4/8] clk: at91: sam9x7: add pmc driver for sam9x7 SoC family   Eugen Hristev
• [PATCH] usb: gadget: atmel: Add SAM9X60 support   Eugen Hristev
• [PATCH v5 6/8] ARM: dts: at91: sam9x75_curiosity: add tweaks for sam9x75 curiosity board   Eugen Hristev
• [PATCH] usb: gadget: atmel: Add SAM9X60 support   Eugen Hristev
• [PATCH] sama5d27: Fix the 'reset' command   Eugen Hristev
• [PATCH v2 2/3] ARM: dts: sam9x60: Add USB gadget DT node.   Eugen Hristev
• [PATCH v2 3/3] ARM: dts: at91: sam9x60-curiosity: Enable USB gadget node   Eugen Hristev
• [PATCH 1/2] configs: am62x_r5: introduce fragment for USB MSC boot   Jon Humphreys
• [PATCH v2 06/11] video: rockchip: Add VOP2 support   Dang Huynh
• [PATCH v2 06/11] video: rockchip: Add VOP2 support   Dang Huynh
• [PATCH v2 00/11] Rockchip VOP2 support   Dang Huynh
• Trying to port sitronix,st7701 panel driver but nothing shows on display   Michał Iwanicki
• [PATCH] net: usb: r8152: add device id of Linksys USB3GIGV1   Gabor Juhos
• [PATCH 0/3] Add UBIFS Support   Santhosh Kumar K
• [PATCH 1/3] configs: am64x: Add UBIFS support   Santhosh Kumar K
• [PATCH 2/3] configs: am62x: Add UBIFS support   Santhosh Kumar K
• [PATCH 3/3] configs: am62px: Add UBIFS support   Santhosh Kumar K
• [PATCH v3 18/31] rockchip: Update rk3399 bootph-tags for VPL   Jonas Karlman
• [PATCH v3 19/31] rockchip: Provide a VPL phase on rk3399   Jonas Karlman
• [PATCH v3 08/31] rockchip: dts: Create a template for the FIT   Jonas Karlman
• [PATCH v3 20/31] rockchip: Add symbols for spl_reloc   Jonas Karlman
• [PATCH v3 21/31] rockchip: rk3399: Adjust initial TPL-stack to match SPL   Jonas Karlman
• [PATCH v3 10/31] rockchip: dts: Use the new binman template for the SPI image too   Jonas Karlman
• [PATCH v3 19/31] rockchip: Provide a VPL phase on rk3399   Jonas Karlman
• [PATCH v4 00/10] rockchip: binman: Use a template for FIT and other improvements   Jonas Karlman
• [PATCH v4 01/10] rockchip: binman: Correct the OS prop for U-Boot   Jonas Karlman
• [PATCH v4 02/10] rockchip: binman: Factor out arch and compression   Jonas Karlman
• [PATCH v4 03/10] rockchip: binman: Add an fdtmap   Jonas Karlman
• [PATCH v4 04/10] rockchip: binman: Create a template for the FIT   Jonas Karlman
• [PATCH v4 05/10] rockchip: binman: Un-indent the FIT template   Jonas Karlman
• [PATCH v4 06/10] rockchip: binman: Use the FIT template in the SPI image   Jonas Karlman
• [PATCH v4 07/10] rockchip: binman: Include a compatible string in each configuration   Jonas Karlman
• [PATCH v4 08/10] rockchip: binman: Use the skip-at-start prop in simple-bin image   Jonas Karlman
• [PATCH v4 09/10] rockchip: binman: Support use of crc32 for SPL_FIT_SIGNATURE   Jonas Karlman
• [PATCH v4 10/10] rockchip: Add SPL_PAD_TO Kconfig default value   Jonas Karlman
• [PATCH v3 19/31] rockchip: Provide a VPL phase on rk3399   Jonas Karlman
• [PATCH] rockchip: io-domain: Enable by default for all supported SoCs   Jonas Karlman
• [PATCH] board: rockchip: Add LCKFB TaishanPi RK3566 Board   Jonas Karlman
• [PATCH v2 3/3] rockchip: rock64-rk3328_defconfig: enable HDMI output and USB keyboard   Jonas Karlman
• [PATCH v2 2/3] video: rockchip: rk3328: filter unsupported modes   Jonas Karlman
• [PATCH v2 3/3] rockchip: rock64-rk3328_defconfig: enable HDMI output and USB keyboard   Jonas Karlman
• [PATCH v1] arm: dts: rockchip: add rk3318 A95X Z2 board   Jonas Karlman
• [PATCH 10/13] arm: dts: rockchip: Add rk3528-pinctrl.dtsi   Jonas Karlman
• [PATCH v2 0/2] rockchip: Add minimal generic RK3328 and RK3399 boards   Jonas Karlman
• [PATCH v2 1/2] board: rockchip: Add minimal generic RK3328 board   Jonas Karlman
• [PATCH v2 2/2] board: rockchip: Add minimal generic RK3399 board   Jonas Karlman
• [PATCH 0/2] rockchip: Update rng compatible for RK356x and RK3588   Jonas Karlman
• [PATCH 1/2] rng: rockchip_rng: Add compatible for RK3568   Jonas Karlman
• [PATCH 2/2] rng: rockchip_rng: Update compatible for RK3588   Jonas Karlman
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Mark Kettenis
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Mark Kettenis
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Mark Kettenis
• [PATCH v2 1/3] clk: rockchip: rk3328: use HDMIPHY PLL as a clock parent for VOP_DCLK   Vasily Khoruzhick
• [PATCH v2 2/3] video: rockchip: rk3328: filter unsupported modes   Vasily Khoruzhick
• [PATCH v2 3/3] rockchip: rock64-rk3328_defconfig: enable HDMI output and USB keyboard   Vasily Khoruzhick
• [PATCH v2 2/3] video: rockchip: rk3328: filter unsupported modes   Vasily Khoruzhick
• [RFC] Raspberry Pi: copy /system/linux,{serial,revision} from firmware   Fiona Klute
• [PATCH v2] efi: Make FDT extra space configurable   Pawel Kochanowski
• [PATCH] efi: Make FDT extra space configurable   Paweł Kochanowski
• [PATCH] efi: Fix efiboot for payloads loaded from memory   Christian Kohlschütter
• U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   Christian Kohlschütter
• Re: U-Boot interferes with initrd binary — Revert "efi: Correct smbios-table installation" ?   Christian Kohlschütter
• [PATCH v2 2/3] video: rockchip: rk3328: filter unsupported modes   Matwey V. Kornilov
• [PATCH v2 3/3] rockchip: rock64-rk3328_defconfig: enable HDMI output and USB keyboard   Matwey V. Kornilov
• [PATCH 1/2] usb: gadget: Remove final remnants of CONFIG_USB_DEVICE   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-next-20250310   Mattijs Korpershoek
• [PATCH 1/3] fastboot: lift restrictions on !NET_LWIP for USB   Mattijs Korpershoek
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-20250321   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-20250321   Mattijs Korpershoek
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Mattijs Korpershoek
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Mattijs Korpershoek
• [PATCH] usb: dwc3: gadget: Fix excepts/expects typo   Mattijs Korpershoek
• usb:composite: data abort on second ums launch   Mattijs Korpershoek
• usb:composite: data abort on second ums launch   Mattijs Korpershoek
• [ANN] U-Boot v2025.04-rc5 released   Mattijs Korpershoek
• usb:composite: data abort on second ums launch   Mattijs Korpershoek
• [PATCH 0/4] usb: gadget: f_mass_storage: Fix crashes on low memory devices   Mattijs Korpershoek
• [PATCH 1/4] usb: gadget: f_mass_storage: Remove kref structure use   Mattijs Korpershoek
• [PATCH 2/4] usb: gadget: f_mass_storage: Drop invalid kfree() in fsg_common_release()   Mattijs Korpershoek
• [PATCH 3/4] usb: gadget: f_mass_storage: Fix NULL dereference in fsg_add()   Mattijs Korpershoek
• [PATCH 4/4] usb: gadget: f_mass_storage: Fix memory leak of fsg buffers   Mattijs Korpershoek
• usb:composite: data abort on second ums launch   Mattijs Korpershoek
• [PATCH] MAINTAINERS: Update email of Mattijs Korpershoek   Mattijs Korpershoek
• [PATCH 1/3] fastboot: lift restrictions on !NET_LWIP for USB   Mattijs Korpershoek
• [PATCH 0/4] usb: gadget: f_mass_storage: Fix crashes on low memory devices   Mattijs Korpershoek
• [PATCH v4 12/14] cmd: add spawn and wait commands   Mattijs Korpershoek
• [PATCH 03/18] gadget: f_thor: annotate switch/case fallthrough   Mattijs Korpershoek
• [PATCH 06/18] fastboot: annotate switch/case fallthrough case   Mattijs Korpershoek
• [PATCH 1/3] configs: phycore_am64x_a53_defconfig: Enable remoteproc cmd   Mattijs Korpershoek
• [PATCH 2/3] configs: phycore_am62x_a53_defconfig: Enable remoteproc cmd   Mattijs Korpershoek
• [PATCH 3/3] configs: phycore_am62x_a53_defconfig: Enable gpio   Mattijs Korpershoek
• [PATCH] usb: gadget: atmel: Add SAM9X60 support   Mattijs Korpershoek
• [PATCH] usb: gadget: atmel: Add SAM9X60 support   Mattijs Korpershoek
• [PATCH 0/4] Support UART over MicroSD slot on Transformer T20   Artur Kowalski
• [PATCH 1/4] tegra: add funcmux for exposing UART over uSD slot on Tegra 20   Artur Kowalski
• [PATCH 2/4] tegra: respect CONFIG_TEGRA_ENABLE_UART* options on Transformer T20   Artur Kowalski
• [PATCH 3/4] ARM: tegra: expose UART-A over uSD on Transformer T20   Artur Kowalski
• [PATCH 4/4] board: asus: transformer: add DTSI file for enabling UART over uSD slot   Artur Kowalski
• [PATCH 0/4] Support UART over MicroSD slot on Transformer T20   Artur Kowalski
• [RFC PATCH] pinctrl: tegra: detect unknown/invalid pin/func configurations   Artur Kowalski
• [PATCH v2 0/3] Support UART over MicroSD slot on Transformer T20   Artur Kowalski
• [PATCH v2 1/3] tegra: add funcmux for exposing UART over uSD slot on Tegra 20   Artur Kowalski
• [PATCH v2 2/3] tegra: respect CONFIG_TEGRA_ENABLE_UART* options on Transformer T20   Artur Kowalski
• [PATCH v2 3/3] tegra: allow to expose UART on microSD slot   Artur Kowalski
• [PATCH 0/4] Support UART over MicroSD slot on Transformer T20   Artur Kowalski
• [PATCH v2 5/6] dt-bindings: clock: drop NUM_CLOCKS define for EN7581   Krzysztof Kozlowski
• [PATCH v2 6/6] dt-bindings: clock: add ID for eMMC for EN7581   Krzysztof Kozlowski
• [PATCH v2 5/6] dt-bindings: clock: drop NUM_CLOCKS define for EN7581   Krzysztof Kozlowski
• [PATCH RESEND] drivers: usb: gadget: composite: add checking for interface number   Arseniy Krasnov
• [PATCH v1] mtd: rawnand: meson: always use OOB bytes during write   Arseniy Krasnov
• [PATCH v1 00/11] Amlogic: ADNL and Optimus protocols support   Arseniy Krasnov
• [PATCH v1 01/11] arch: arm: meson: sm: add commands to reboot device in different modes   Arseniy Krasnov
• [PATCH v1 02/11] arch: arm: meson: use 'meson_sm_call()' in 'meson_sm_pwrdm_set()'   Arseniy Krasnov
• [PATCH v1 03/11] usb: gadget: fastboot: make part of USB fastboot code shared   Arseniy Krasnov
• [PATCH v1 04/11] usb: gadget: amlogic: common code for Amlogic flashing commands   Arseniy Krasnov
• [PATCH v1 05/11] mtd: rawnand: meson: move some defines to dedicated header   Arseniy Krasnov
• [PATCH v1 06/11] arch: arm: meson: bootloader write support   Arseniy Krasnov
• [PATCH v1 07/11] arm: meson: a1: add A1_SYSCTRL_SEC_STICKY_REG2   Arseniy Krasnov
• [PATCH v1 08/11] usb: gadget: amlogic: implement ADNL protocol   Arseniy Krasnov
• [PATCH v1 09/11] arm: meson: a1: ADNL protocol support   Arseniy Krasnov
• [PATCH v1 10/11] usb: gadget: amlogic: implement Optimus protocol   Arseniy Krasnov
• [PATCH v1 11/11] arch: arm: axg: Optimus protocol support   Arseniy Krasnov
• [PATCH] test/py: memtest: Fix test for non-trivial parameters   Love Kumar
• [PATCH v2] configs: j784s4-am69: Enable UFS   Udit Kumar
• [PATCH 0/2] Add WDT support for J7200 SOC   Udit Kumar
• [PATCH 1/2] arm: dts: k3-j7200: Add ESM PMIC support for tps659413   Udit Kumar
• [PATCH 2/2] configs: j7200_evm_r5: Add ESM related configs for J7200   Udit Kumar
• [PATCH] configs: am68_sk_r5: Enable AVS config   Udit Kumar
• [PATCH] configs: am68_sk_r5: Enable AVS config   Kumar, Udit
• [PATCH v2] configs: am68_sk_r5: Enable AVS config   Udit Kumar
• [PATCH] xilinx: versal: add firmware access to PMC multi Boot mode register   Prasad Kummari
• [PATCH 0/3] loadpdi related code changes.   Prasad Kummari
• [PATCH 1/3] arm64: versal-net: Add PL bit stream load support   Prasad Kummari
• [PATCH 2/3] arm64: versal2: Add PL bit stream load support   Prasad Kummari
• [PATCH 3/3] xilinx: versal: remove versal loadpdi command   Prasad Kummari
• [PATCH 2/2] mtd: spi-nor-core: Rework spansion_sr_ready() for parallel memories support   Takahiro Kuwano
• [PATCH] usb: gadget: atmel: Add SAM9X60 support   Zixun LI
• usb:composite: data abort on second ums launch   Zixun LI
• usb:composite: data abort on second ums launch   Zixun LI
• usb:composite: data abort on second ums launch   Zixun LI
• [PATCH 0/4] usb: gadget: f_mass_storage: Fix crashes on low memory devices   Zixun LI
• [PATCH 0/4] usb: gadget: f_mass_storage: Fix crashes on low memory devices   Zixun LI
• [PATCH] usb: gadget: atmel: Add SAM9X60 support   Zixun LI
• [PATCH v2 1/3] usb: gadget: atmel: Add SAM9X60 support   Zixun LI
• [PATCH v2 2/3] ARM: dts: sam9x60: Add USB gadget DT node.   Zixun LI
• [PATCH v2 3/3] ARM: dts: at91: sam9x60-curiosity: Enable USB gadget node   Zixun LI
• [PATCH 1/7] arm: at91: wdt: Remove unused at91_wdt struct   Zixun LI
• [PATCH 2/7] arm: at91: wdt: Rename regval in priv data to mr   Zixun LI
• [PATCH 3/7] watchdog: at91sam9_wdt: Rename priv to wdt   Zixun LI
• [PATCH 4/7] arm: at91: wdt: Add SAM9X60 register definition   Zixun LI
• [PATCH 5/7] watchdog: at91sam9_wdt: Add SAM9X60 support   Zixun LI
• [PATCH 6/7] ARM: dts: sam9x60: Add watchdog DT node.   Zixun LI
• [PATCH 7/7] ARM: dts: at91: sam9x60-curiosity: Enable watchdog node   Zixun LI
• Has CVE-2024-42040 ever been addressed?   Daniel Leidert
• [PATCH] imx93_evk: Fix wrong VDDQ voltage setting for LPDDR4x   Ye Li
• [PATCH 1/1] riscv: qemu: imply CONFIG_RNG_RISCV_ZKR   Leo Liang
• [PATCH v2 1/1] configs: SiFive Unmatched: add 'nvme scan' to preboot   Leo Liang
• [PATCH 1/5] riscv: lib: Add a default implementation of board_fdt_blob_setup   Leo Liang
• [PATCH 2/5] board: qemu: riscv: Remove duplicated board_fdt_blob_setup   Leo Liang
• [PATCH 3/5] board: starfive: Remove duplicated board_fdt_blob_setup   Leo Liang
• [PATCH 4/5] board: sifive: Remove duplicated board_fdt_blob_setup   Leo Liang
• [PATCH 5/5] riscv: select OF_HAS_PRIOR_STAGE by default if SBI is enabled   Leo Liang
• [PATCH 2/4] riscv: reset: k1: Add reset driver   Leo Liang
• [PATCH 5/5] riscv: select OF_HAS_PRIOR_STAGE by default if SBI is enabled   Leo Liang
• [GIT PULL] u-boot-riscv/master   Leo Liang
• [PATCH v2 1/4] riscv: lib: Add a default implementation of board_fdt_blob_setup   Leo Liang
• [PATCH] RISCV: config: Remove CFG_SYS_SDRAM_BASE   Leo Liang
• [PATCH] riscv: dts: cv18xx: Drop unused dummy clocks   Leo Liang
• [PATCH v2 1/4] riscv: dt-binding: k1: Add reset driver binding definition.   Leo Liang
• [PATCH v2 2/4] riscv: reset: k1: Add reset driver   Leo Liang
• [PATCH v2 3/4] riscv: dts: k1: add reset controller node in device tree   Leo Liang
• [PATCH v2 4/4] Add reset config options for k1   Leo Liang
• [GIT PULL] u-boot-riscv/master   Leo Liang
• [PATCH v2 1/4] riscv: lib: Add a default implementation of board_fdt_blob_setup   Leo Liang
• [GIT PULL] u-boot-riscv/next   Leo Liang
• [PATCH RFC/RFT 0/3] omap24xx_i2c: Enable Repeated Start functionality   Aniket Limaye
• [PATCH RFC/RFT 1/3] i2c: omap24xx_i2c: Use new function __omap24_i2c_xfer_msg()   Aniket Limaye
• [PATCH RFC/RFT 2/3] i2c: omap24xx_i2c: support CONFIG_I2C_REPEATED_START in DM_I2C xfer   Aniket Limaye
• [PATCH RFC/RFT 3/3] drivers: i2c: Kconfig: Add config for I2C_REPEATED_START   Aniket Limaye
• [PATCH RFC/RFT 1/3] i2c: omap24xx_i2c: Use new function __omap24_i2c_xfer_msg()   Aniket Limaye
• [PATCH RFC/RFT 2/3] i2c: omap24xx_i2c: support CONFIG_I2C_REPEATED_START in DM_I2C xfer   Aniket Limaye
• [PATCH RFC/RFT 0/3] omap24xx_i2c: Enable Repeated Start functionality   Aniket Limaye
• [PATCH v2 0/4] omap24xx_i2c: Enable Repeated Start functionality   Aniket Limaye
• [PATCH v2 1/4] i2c: omap24xx_i2c: Remove unused CONFIG_I2C_REPEATED_START   Aniket Limaye
• [PATCH v2 2/4] i2c: omap24xx_i2c: Use new function __omap24_i2c_xfer_msg()   Aniket Limaye
• [PATCH v2 3/4] i2c: omap24xx_i2c: support CONFIG for repeated start in DM_I2C xfer   Aniket Limaye
• [PATCH v2 4/4] drivers: i2c: Kconfig: Add CONFIG_SYS_I2C_OMAP24XX_REPEATED_START   Aniket Limaye
• [PATCH] xilinx: Allow alternative boot strategies in zynq-common.h   Mike Looijmans
• [PATCH 1/2] xilinx: Allow alternative boot strategies in zynq-common.h   Mike Looijmans
• [PATCH 2/2] topic: Use distro_boot for topic-miami boards   Mike Looijmans
• [PATCH 1/2] xilinx: Allow alternative boot strategies in zynq-common.h   Mike Looijmans
• Reading QSPI on zynq7 broken since commit 9bb02f7f4533   Mike Looijmans
• Reading QSPI on zynq7 broken since commit 9bb02f7f4533   Mike Looijmans
• [PATCH 1/2] xilinx: Allow alternative boot strategies in zynq-common.h   Mike Looijmans
• [PATCH v2 1/2] xilinx: Allow alternative boot strategies in zynq-common.h   Mike Looijmans
• [PATCH v2 2/2] topic: Use distro_boot for topic-miami boards   Mike Looijmans
• Reading QSPI on zynq7 broken since commit 9bb02f7f4533   Mike Looijmans
• block devices on MTD and UBI   Mike Looijmans
• block devices on MTD and UBI   Mike Looijmans
• block devices on MTD and UBI   Mike Looijmans
• [PATCH] mtdpart: Support MTDPART_SIZ_FULL in fixed-partitions   Mike Looijmans
• [PATCH] topic: zynqmp: Remove zynqmp-xilinx-xdp platform   Mike Looijmans
• [PATCH] topic: zynqmp: Remove zynqmp-xilinx-xdp platform   Mike Looijmans
• [PATCH v2] spi: Introduce initial EEPROM driver mode support   Loureiro, Joao
• [RFC PATCH 0/4] cmd: fuse: Introduce fuse writebuff sub-system and clean up   Harsha Vardhan V M
• [RFC PATCH 1/4] cmd: fuse: Remove custom string functions   Harsha Vardhan V M
• [RFC PATCH 2/4] cmd: fuse: Add fuse writebuff sub-system command   Harsha Vardhan V M
• [RFC PATCH 3/4] drivers: k3_fuse: Add fuse sub-system func calls   Harsha Vardhan V M
• [RFC PATCH 4/4] docs: fuse: Add fuse writebuff cmd docs   Harsha Vardhan V M
• [EXTERNAL] Re: [RFC PATCH 1/4] cmd: fuse: Remove custom string functions   Harsha Vardhan V M
• [EXTERNAL] Re: [RFC PATCH 2/4] cmd: fuse: Add fuse writebuff sub-system command   Harsha Vardhan V M
• [RFC PATCH v2 0/5] cmd: fuse: Introduce fuse writebuff sub-system and clean up   Harsha Vardhan V M
• [RFC PATCH v2 1/5] cmd: fuse: Remove custom string functions   Harsha Vardhan V M
• [RFC PATCH v2 2/5] doc: cmd: add documentation for fuse command   Harsha Vardhan V M
• [RFC PATCH v2 3/5] cmd: fuse: Add fuse writebuff sub-system command   Harsha Vardhan V M
• [RFC PATCH v2 4/5] drivers: k3_fuse: Add fuse sub-system func calls   Harsha Vardhan V M
• [RFC PATCH v2 5/5] doc: cmd: add fuse writebuff cmd documentation   Harsha Vardhan V M
• [RFC PATCH 1/4] cmd: fuse: Remove custom string functions   Harsha Vardhan V M
• [RFC PATCH v2 2/5] doc: cmd: add documentation for fuse command   Harsha Vardhan V M
• [RFC PATCH 3/4] drivers: k3_fuse: Add fuse sub-system func calls   Harsha Vardhan V M
• [RFC PATCH v3 0/5] cmd: fuse: Introduce fuse writebuff sub-system and clean up   Harsha Vardhan V M
• [RFC PATCH v3 1/5] cmd: fuse: Remove custom string functions   Harsha Vardhan V M
• [RFC PATCH v3 2/5] doc: cmd: Add documentation for fuse command   Harsha Vardhan V M
• [RFC PATCH v3 3/5] cmd: fuse: Add fuse writebuff sub-system command   Harsha Vardhan V M
• [RFC PATCH v3 4/5] drivers: k3_fuse: Add fuse sub-system func calls   Harsha Vardhan V M
• [RFC PATCH v3 5/5] doc: cmd: Add fuse writebuff cmd documentation   Harsha Vardhan V M
• [EXTERNAL] Re: [RFC PATCH v3 1/5] cmd: fuse: Remove custom string functions   Harsha Vardhan V M
• [PATCH 0/5] cmd: fuse: Introduce fuse writebuff sub-system and clean up   Harsha Vardhan V M
• [PATCH 1/5] cmd: fuse: Remove custom string functions   Harsha Vardhan V M
• [PATCH 2/5] doc: cmd: Add documentation for fuse command   Harsha Vardhan V M
• [PATCH 3/5] cmd: fuse: Add fuse writebuff sub-system command   Harsha Vardhan V M
• [PATCH 4/5] drivers: k3_fuse: Add fuse sub-system func calls   Harsha Vardhan V M
• [PATCH 5/5] doc: cmd: Add fuse writebuff cmd documentation   Harsha Vardhan V M
• [PATCH] board: ti: am62px: rm-cfg: Add support for HC BCDMA   Vishal Mahaveer
• [PATCH] board: ti: am335x: Fix selection of BeagleBone Green   Kory Maincent
• [RFC PATCH] docker: add ADI build-related tools to docker image   Greg Malysa
• [resend v3 00/19] Add Cadence NAND Driver support   Maniyam, Dinesh
• [resend v2 00/19] Add Cadence NAND Driver support   Maniyam, Dinesh
• [resend v3 00/19] Add Cadence NAND Driver support   Maniyam, Dinesh
• [resend v2 04/13] drivers: Enabled Kconfig and Makefile for i3c support   Maniyam, Dinesh
• [resend v2 05/13] drivers: i3c: Enabled Kconfig and Makefile for DWI3C   Maniyam, Dinesh
• [resend v2 06/13] drivers: i3c: Add i3c sandbox simple test.   Maniyam, Dinesh
• [resend v2 10/13] cmd: Enabled Kconfig and Makefile for DWI3C cmd support   Maniyam, Dinesh
• [resend v2 09/13] cmd: Add i3c command support.   Maniyam, Dinesh
• [resend v2 12/13] configs: sandbox_defconfig: Enable configs for sandbox i3c   Maniyam, Dinesh
• [resend v2 00/19] Add Cadence NAND Driver support   Maniyam, Dinesh
• [PATCH] common: spl: Enable Instruction cache after relocation in board_init_r   Prasanth Mantena
• [PATCH] common: spl: Enable Instruction cache after relocation in board_init_r   Prasanth Babu Mantena
• [PATCH] tools: add pkg-config for preload_check_sign   Raymond Mao
• [PATCH 1/2] bloblist: fix the overriding of fdt from bloblist   Raymond Mao
• [PATCH 2/2] env: point fdt address to the fdt in a bloblist   Raymond Mao
• [PATCH 1/2] bloblist: fix the overriding of fdt from bloblist   Raymond Mao
• [PATCH 1/2] bloblist: fix the overriding of fdt from bloblist   Raymond Mao
• [PATCH 1/2] bloblist: fix the overriding of fdt from bloblist   Raymond Mao
• [PATCH 2/2] env: point fdt address to the fdt in a bloblist   Raymond Mao
• [PATCH v3 29/31] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Raymond Mao
• [PATCH 2/2] env: point fdt address to the fdt in a bloblist   Raymond Mao
• [PATCH 0/4] bloblist: fdt: Clean up the code   Raymond Mao
• [PATCH 1/2] bloblist: fix the overriding of fdt from bloblist   Raymond Mao
• [PATCH 2/2] env: point fdt address to the fdt in a bloblist   Raymond Mao
• [PATCH 0/4] airoha: Add initial support AN7581   Christian Marangi
• [PATCH 1/4] airoha: Add initial support for Airoha AN7581 SoC   Christian Marangi
• [PATCH 2/4] clk: airoha: Add support for Airoha AN7581 SoC clock   Christian Marangi
• [PATCH 3/4] reset: airoha: Add driver for controlling reset line of AN7581   Christian Marangi
• [PATCH 4/4] arch: arm: dts: an7581-evb: Add clock and reset nodes   Christian Marangi
• [PATCH v2 0/6] airoha: Add initial support AN7581   Christian Marangi
• [PATCH v2 1/6] airoha: Add initial support for Airoha AN7581 SoC   Christian Marangi
• [PATCH v2 2/6] clk: airoha: Add support for Airoha AN7581 SoC clock   Christian Marangi
• [PATCH v2 3/6] reset: airoha: Add driver for controlling reset line of AN7581   Christian Marangi
• [PATCH v2 4/6] arm64: dts: airoha: en7581: Add Clock Controller node   Christian Marangi
• [PATCH v2 5/6] dt-bindings: clock: drop NUM_CLOCKS define for EN7581   Christian Marangi
• [PATCH v2 6/6] dt-bindings: clock: add ID for eMMC for EN7581   Christian Marangi
• [RESEND PATCH] clk: fix crash on clk_set_rate clean rate cache   Christian Marangi
• [PATCH v2 0/6] airoha: Add initial support AN7581   Christian Marangi
• [PATCH v2 5/6] dt-bindings: clock: drop NUM_CLOCKS define for EN7581   Christian Marangi
• [PATCH v3 3/3] DONOTMERGE: arm: dts: k3-j784s4-main: Add PBIST_14 node   Nishanth Menon
• [PATCH v2 4/4] board/BuR/zynq: initial commit   Bernhard Messerklinger
• [PATCH v2 4/4] board/BuR/zynq: initial commit   Bernhard Messerklinger
• [PATCH] drivers: pinctrl: Add Qualcomm SDM630/660 TLMM driver   Alexey Minnekhanov
• [PATCH] phy: Add SDM660 support to Qualcomm QUSB2 phy   Alexey Minnekhanov
• [PATCH] mach-snapdragon: of_fixup: fix condition check in ft_board_setup()   Alexey Minnekhanov
• [PATCH v2] drivers: pinctrl: Add Qualcomm SDM630/660 TLMM driver   Alexey Minnekhanov
• [PATCH] common: console: Delete obsolete VIDCONSOLE_AS_{LCD, NAME} options   Soeren Moch
• [PATCH v2 0/4] USB-PD TCPM improvements   Soeren Moch
• [PATCH v2 0/4] USB-PD TCPM improvements   Anand Moon
• [PATCH v2 0/4] USB-PD TCPM improvements   Anand Moon
• [PATCH v2 0/4] USB-PD TCPM improvements   Anand Moon
• [PATCH v2 0/4] USB-PD TCPM improvements   Anand Moon
• [PATCH] rockchip: io-domain: Enable by default for all supported SoCs   Anand Moon
• [PATCH v3 0/8] Add support for sam9x7 SoC and SAM9X75 Curiosity board   Manikandan Muralidharan
• [PATCH v3 1/8] dt-bindings: clock: rename at91.h to at91-pmc-status.h   Manikandan Muralidharan
• [PATCH v3 2/8] clk: at91: sam9x60-pll: add support for core clock frequency inputs   Manikandan Muralidharan
• [PATCH v3 3/8] clk: at91: sam9x60-pll: add support for HW PLL freq dividers   Manikandan Muralidharan
• [PATCH v3 4/8] clk: at91: sam9x7: add pmc driver for sam9x7 SoC family   Manikandan Muralidharan
• [PATCH v3 5/8] ARM: at91: Add sam9x7 soc   Manikandan Muralidharan
• [PATCH v3 6/8] ARM: dts: at91: sam9x75_curiosity: add tweaks for sam9x75 curiosity board   Manikandan Muralidharan
• [PATCH v3 7/8] board: sam9x75_curiosity: Add support for sam9x75 curiosity   Manikandan Muralidharan
• [PATCH v3 8/8] configs: sam9x75_curiosity: Add initial mmc default config   Manikandan Muralidharan
• [PATCH v4 0/8] Add support for sam9x7 SoC and SAM9X75 Curiosity board   Manikandan Muralidharan
• [PATCH v4 1/8] dt-bindings: drop at91.h from clock includes   Manikandan Muralidharan
• [PATCH v4 2/8] clk: at91: sam9x60-pll: add support for core clock frequency inputs   Manikandan Muralidharan
• [PATCH v4 3/8] clk: at91: sam9x60-pll: add support for HW PLL freq dividers   Manikandan Muralidharan
• [PATCH v4 4/8] clk: at91: sam9x7: add pmc driver for sam9x7 SoC family   Manikandan Muralidharan
• [PATCH v4 5/8] ARM: at91: Add sam9x7 soc   Manikandan Muralidharan
• [PATCH v4 6/8] ARM: dts: at91: sam9x75_curiosity: add tweaks for sam9x75 curiosity board   Manikandan Muralidharan
• [PATCH v4 7/8] board: sam9x75_curiosity: Add support for sam9x75 curiosity   Manikandan Muralidharan
• [PATCH v4 8/8] configs: sam9x75_curiosity: Add initial mmc default config   Manikandan Muralidharan
• [PATCH v5 0/8] Add support for sam9x7 SoC and SAM9X75 Curiosity board   Manikandan Muralidharan
• [PATCH v5 1/8] dt-bindings: drop at91.h from clock includes   Manikandan Muralidharan
• [PATCH v5 2/8] clk: at91: sam9x60-pll: add support for core clock frequency inputs   Manikandan Muralidharan
• [PATCH v5 3/8] clk: at91: sam9x60-pll: add support for HW PLL freq dividers   Manikandan Muralidharan
• [PATCH v5 4/8] clk: at91: sam9x7: add pmc driver for sam9x7 SoC family   Manikandan Muralidharan
• [PATCH v5 5/8] ARM: at91: Add sam9x7 soc   Manikandan Muralidharan
• [PATCH v5 6/8] ARM: dts: at91: sam9x75_curiosity: add tweaks for sam9x75 curiosity board   Manikandan Muralidharan
• [PATCH v5 7/8] board: sam9x75_curiosity: Add support for sam9x75 curiosity   Manikandan Muralidharan
• [PATCH v5 8/8] configs: sam9x75_curiosity: Add initial mmc default config   Manikandan Muralidharan
• [PATCH 0/2] vepxpress64: disable CRC32 by default and add FVP with TF-A guide   Harrison Mutai
• [PATCH 1/2] vepxress64: disable CRC32 by default to prevent aborts   Harrison Mutai
• [PATCH 2/2] vepxress64: add guide for running FVP with TF-A   Harrison Mutai
• [PATCH] rockchip: Enable usb gadget on Radxa ROCK 5C   FUKAUMI Naoki
• [PATCH v1 0/6] Add initial support for IPQ5424 based boards   Varadarajan Narayanan
• [PATCH v1 1/6] arm64: dts: qcom: ipq5424: Add USB controller and phy nodes   Varadarajan Narayanan
• [PATCH v1 2/6] dts: ipq5424-rdp466-u-boot: add override dtsi   Varadarajan Narayanan
• [PATCH v1 3/6] doc: board/qualcomm: Update RDP signing instructions   Varadarajan Narayanan
• [PATCH v1 4/6] clk/qcom: add initial clock driver for ipq5424   Varadarajan Narayanan
• [PATCH v1 5/6] pinctrl: qcom: Add ipq5424 pinctrl driver   Varadarajan Narayanan
• [PATCH v1 6/6] configs: add qcom_ipq5424_mmc_defconfig   Varadarajan Narayanan
• [PATCH v1 6/6] configs: add qcom_ipq5424_mmc_defconfig   Varadarajan Narayanan
• [PATCH v1 1/2] pinctrl: qcom: add driver for SA8775P SoC   Varadarajan Narayanan
• [PATCH v1 2/2] qcom_defconfig: enable pinctrl for SA8775P   Varadarajan Narayanan
• [PATCH v1 1/2] dm: blk: Add 'erase' generic block device commands   Varadarajan Narayanan
• [PATCH v1 2/2] drivers: scsi: Add 'erase' support   Varadarajan Narayanan
• [PATCH v1] regulator: qcom-rpmh-regulator: add support for pmm8654 regulators   Varadarajan Narayanan
• [PATCH v1] efi_loader: Handle GD_FLG_SKIP_RELOC   Varadarajan Narayanan
• [PATCH v1] efi_loader: Handle GD_FLG_SKIP_RELOC   Varadarajan Narayanan
• [PATCH 2/2] powerpc: mpc8xxx_spi: Catch bad chip variants earlier   J. Neuschäfer
• [CAD QSPI v1] spi: cadence-qspi: Add disable STIG mode quikrs.   Boon Khai Ng
• [PATCH] tiny-printf: Add support for upper case hex values   Christoph Niedermaier
• [PATCH] cmd: env: select: Add output for available evironment targets   Christoph Niedermaier
• [PATCH] tiny-printf: Add support for upper case hex values   Christoph Niedermaier
• [PATCH] cmd: env: select: Add output for available evironment targets   Christoph Niedermaier
• [PATCH] tiny-printf: Add support for upper case hex values   Christoph Niedermaier
• [PATCH V2] tiny-printf: Improve %X formatting   Christoph Niedermaier
• [PATCH V2] cmd: env: select: Add output for available evironment targets   Christoph Niedermaier
• [PATCH V2] cmd: env: select: Add output for available evironment targets   Christoph Niedermaier
• block devices on MTD and UBI   Oskar Nilsson
• [PATCH] ubi: fix bug creating partitions for non-existent volumes   Oskar Nilsson
• [PATCH v2] ubi: fix bug creating partitions for non-existent volumes   Oskar Nilsson
• block devices on MTD and UBI   Oskar Nilsson
• [PATCH 1/2] pinctrl: qcom: add sc7280 pinctrl driver   Christopher Obbard
• [PATCH 2/2] qcom_defconfig: enable PINCTRL_QCOM_SC7280   Christopher Obbard
• [PATCH] qcom_defconfig: enable OF_UPSTREAM_BUILD_VENDOR   Christopher Obbard
• [PATCH v4 0/5] rpi: Tidy up booting   Christopher Obbard
• [PATCH v4 2/5] rpi: Set bootm_size to 512MB   Christopher Obbard
• [PATCH v4 3/5] rpi: Drop fdt_high and initrd_high   Christopher Obbard
• [PATCH v4 4/5] rpi: Update environment to support booti and large initrd   Christopher Obbard
• [PATCH v4 5/5] rpi: Use the U-Boot control FDT for fdt_addr   Christopher Obbard
• [PATCH v4 1/5] rpi: Add myself to the list of maintainers   Christopher Obbard
• [PATCH v4 4/5] rpi: Update environment to support booti and large initrd   Christopher Obbard
• [PATCH v4 5/5] rpi: Use the U-Boot control FDT for fdt_addr   Christopher Obbard
• [PATCH v4 3/5] rpi: Drop fdt_high and initrd_high   Christopher Obbard
• [PATCH v4 0/5] rpi: Tidy up booting   Christopher Obbard
• [PATCH v2 1/2] board: rockchip: Add minimal generic RK3328 board   Christopher Obbard
• [PATCH v2 2/2] board: rockchip: Add minimal generic RK3399 board   Christopher Obbard
• [PATCH v4 00/29] arm: Support building as an EFI app   Igor Opaniuk
• [PATCH 0/3] Add support for RAM boot from maskrom mode   Arnaud Patard
• [PATCH] rockchip: Enable usb gadget on Radxa ROCK 5C   Arnaud Patard
• [PATCH] rockchip: Enable usb gadget on Radxa ROCK 5C   Arnaud Patard
• Rockchip VOP2 support   Maciej Pijanowski
• [PATCH v2 00/11] Rockchip VOP2 support   Maciej Pijanowski
• [PATCH] Add cross compile dependecy info for ARMv7   Peter Polgar
• [PATCH] fs/squashfs: Fix memory leak in sqfs_size_nest()   Andrea della Porta
• [PATCH v4 4/6] arm64: mmu_change_region_attr() add an option not to break PTEs   Andre Przywara
• [PATCH v1] sunxi: kconfig : Make CHIP_DIP_SCAN depend on ARCH_SUNXI   Andre Przywara
• [PATCH 2/8] sunxi: pmic_bus: support alternative I2C address   Andre Przywara
• [PATCH] sunxi: pmic_bus: Move SPL I2C addresses into Kconfig   Andre Przywara
• [PATCH 00/34] sunxi: clock refactoring and Allwinner A523 support   Andre Przywara
• [PATCH 01/34] sunxi: clock: H6: drop usage of struct sunxi_ccm_reg   Andre Przywara
• [PATCH 02/34] sunxi: mmc: remove usage of struct sunxi_ccm_reg   Andre Przywara
• [PATCH 03/34] sunxi: H616: dram: remove usage of struct sunxi_ccm_reg   Andre Przywara
• [PATCH 04/34] sunxi: H6: dram: remove usage of struct sunxi_ccm_reg   Andre Przywara
• [PATCH 05/34] sunxi: clock: H6: remove struct sunxi_ccm_reg   Andre Przywara
• [PATCH 06/34] sunxi: clock: H6: drop usage of struct sunxi_prcm_reg   Andre Przywara
• [PATCH 07/34] sunxi: H6/H616: dram: remove usage of struct sunxi_prcm_reg   Andre Przywara
• [PATCH 08/34] sunxi: clock: H6: remove struct sunxi_prcm_reg   Andre Przywara
• [PATCH 09/34] sunxi: clock: H6: unify PLL control bit definitions   Andre Przywara
• [PATCH 10/34] sunxi: clock: H6: factor out clock_set_pll()   Andre Przywara
• [PATCH 11/34] sunxi: clock: H6: factor out H6/H616 CPU clock setup   Andre Przywara
• [PATCH 12/34] sunxi: clock: H6: add A523 CPU PLL support   Andre Przywara
• [PATCH 13/34] sunxi: spl: add support for Allwinner A523 watchdog   Andre Przywara
• [PATCH 14/34] dt-bindings: add Allwinner A523 CCU bindings   Andre Przywara
• [PATCH 15/34] clk: sunxi: Add support for the A523 CCU   Andre Przywara
• [PATCH 16/34] clk: sunxi: Add support for the A523 -R CCU   Andre Przywara
• [PATCH 17/34] pinctrl: sunxi: add Allwinner A523 pinctrl description   Andre Przywara
• [PATCH 18/34] sunxi: mmc: add support for Allwinner A523 MMC mod clock   Andre Przywara
• [PATCH 19/34] watchdog: sunxi: add A523 support   Andre Przywara
• [PATCH 20/34] power: regulator: add AXP323 support   Andre Przywara
• [PATCH 21/34] sunxi: update cpu_sunxi_ncat2.h   Andre Przywara
• [PATCH 22/34] sunxi: Kconfig: consolidate SYS_CLK_FREQ selection   Andre Przywara
• [PATCH 23/34] spl: reorder SPL_MAX_SIZE defaults for sunxi   Andre Przywara
• [PATCH 24/34] sunxi: armv8: fel: move fel_stash variable to the front   Andre Przywara
• [PATCH 25/34] sunxi: arm64: boot0.h: move fel_stash_addr variable to the front   Andre Przywara
• [PATCH 26/34] sunxi: update rmr_switch.S source code   Andre Przywara
• [PATCH 27/34] sunxi: armv8: FEL: save and restore GICv3 registers   Andre Przywara
• [PATCH 28/34] sunxi: armv8: FEL: save and restore SP_IRQ   Andre Przywara
• [PATCH 29/34] sunxi: sun50i_h6: add A523 SPL clock setup code   Andre Przywara
• [PATCH 30/34] sunxi: A523: add DRAM initialisation routine   Andre Przywara
• [PATCH 31/34] sunxi: A523: add DDR3 DRAM support   Andre Przywara
• [PATCH 32/34] sunxi: add basic A523 support   Andre Przywara
• [PATCH 33/34] sunxi: A523: add DT files from Linux v3 branch   Andre Przywara
• [PATCH 34/34] sunxi: A523: add defconfigs for three boards   Andre Przywara
• [PATCH 01/34] sunxi: clock: H6: drop usage of struct sunxi_ccm_reg   Andre Przywara
• [PATCH 28/34] sunxi: armv8: FEL: save and restore SP_IRQ   Andre Przywara
• [PATCH 13/34] sunxi: spl: add support for Allwinner A523 watchdog   Andre Przywara
• [PATCH 16/34] clk: sunxi: Add support for the A523 -R CCU   Andre Przywara
• [PATCH 1/2] sunxi: h616: dram: Rework size detection   Andre Przywara
• [PATCH] ata: ahci: remove bad free   Andre Przywara
• [PATCH] efi_loader: fix ipv4 device path node conversion   Andre Przywara
• [PATCH 2/2] sunxi: H616: dram: Improve address wrapping detection   Andre Przywara
• [PATCH] sunxi: mmc: Improve reset procedure   Andre Przywara
• [PATCH] sunxi: mmc: Improve reset procedure   Andre Przywara
• FIXUP! sunxi: mmc: Improve reset procedure   Andre Przywara
• [PATCH] common: console: move break; statement   Andre Przywara
• [PATCH] topic: zynqmp: Remove zynqmp-xilinx-xdp platform   Andre Przywara
• Pull request: u-boot-sunxi/next for next   Andre Przywara
• [PATCH 00/18] Annotate switch/case fallthrough cases   Andre Przywara
• [PATCH 01/18] spl: mmc: properly annotate fallthrough   Andre Przywara
• [PATCH 02/18] zlib: annotate switch/case fallthrough cases   Andre Przywara
• [PATCH 03/18] gadget: f_thor: annotate switch/case fallthrough   Andre Przywara
• [PATCH 04/18] use proper fallthrough annotations   Andre Przywara
• [PATCH 05/18] net/net: fix switch/case fallthrough annotations   Andre Przywara
• [PATCH 06/18] fastboot: annotate switch/case fallthrough case   Andre Przywara
• [PATCH 07/18] net: sun8i-emac: annotate fallthrough   Andre Przywara
• [PATCH 08/18] usb: ohci-hcd: annotate switch/case fallthrough   Andre Przywara
• [PATCH 09/18] usb: xhci: annotate switch/case fallthrough properly   Andre Przywara
• [PATCH 10/18] video: annotate switch/case fall-through   Andre Przywara
• [PATCH 11/18] net: e1000: annotate switch/case fallthrough   Andre Przywara
• [PATCH 12/18] mtd: ubi: annotate fallthrough   Andre Przywara
• [PATCH 13/18] arm: mach-k3: am62p: annotate switch/case fallthrough   Andre Przywara
• [PATCH 14/18] mtd: spi-nor-tiny: annotate switch/case fallthrough   Andre Przywara
• [PATCH 15/18] mtd: rawnand: nand_base: annotate switch/case fallthrough   Andre Przywara
• [PATCH 16/18] cmd: pmic: annotate switch/case fallthrough   Andre Przywara
• [PATCH 17/18] cmd: spl: annotate switch/case fallthrough   Andre Przywara
• [PATCH 18/18] [DO NOT MERGE] Makefile: enable switch/case fallthrough warnings   Andre Przywara
• [PATCH] sunxi: h616: defconfigs: enable eMMC   Andre Przywara
• [PATCH 00/18] Annotate switch/case fallthrough cases   Andre Przywara
• [PATCH 00/18] Annotate switch/case fallthrough cases   Andre Przywara
• [PATCH] memory: ti-gpmc: Alloc per driver private struct   Vignesh Raghavendra
• [PATCH 0/2] Enable support for VAB flow on Agilex5 SoCFPGA boards   Naresh Kumar Ravulapalli
• [PATCH 1/2] arch: arm: dts: Enable kernel itb file generation for Agilex5 SoCFPGA   Naresh Kumar Ravulapalli
• [PATCH 2/2] configs: Enable VAB flow for Agilex5 SoCFPGA boards   Naresh Kumar Ravulapalli
• [PATCH] drivers: spi: Fix data loss issue in QSPI   Naresh Kumar Ravulapalli
• [PATCH] drivers: ddr: altera: Fix integer overflow during size calculation   Naresh Kumar Ravulapalli
• [PATCH 0/1] Add partial reconfiguration console commands   Naresh Kumar Ravulapalli
• [PATCH 1/1] drivers: fpga: Add partial reconfiguration console commands   Naresh Kumar Ravulapalli
• [PATCH] configs: Enable partial reconfiguration support for Stratix10   Naresh Kumar Ravulapalli
• [PATCH] reset: socfpga: release more A10 peripherals out of reset   Naresh Kumar Ravulapalli
• [PATCH] fs/squashfs: Fix memory leak in sqfs_size_nest()   Miquel Raynal
• [PATCH v4 05/12] power-domain: Add refcounting   Miquel Raynal
• [PATCH v4 05/12] power-domain: Add refcounting   Miquel Raynal
• [PATCH v4 00/12] Add imx8mp video support   Miquel Raynal
• [PATCH v5 00/12] Add imx8mp video support   Miquel Raynal
• [PATCH v5 01/12] core: ofnode: Fix a comment   Miquel Raynal
• [PATCH v5 02/12] dm: doc: Fix example   Miquel Raynal
• [PATCH v5 03/12] dm: core: Add a helper to retrieve devices through graph endpoints   Miquel Raynal
• [PATCH v5 04/12] test: dm: test-fdt: Add checks for uclass_get_device_by_endpoint()   Miquel Raynal
• [PATCH v5 05/12] power-domain: Add refcounting   Miquel Raynal
• [PATCH v5 06/12] clk: Ensure the parent clocks are enabled while reparenting   Miquel Raynal
• [PATCH v5 07/12] clk: imx8mp: Add media related clocks   Miquel Raynal
• [PATCH v5 08/12] imx: power-domain: Describe the i.MX8 MEDIAMIX domain   Miquel Raynal
• [PATCH v5 09/12] imx: power-domain: Add support for the MEDIAMIX control block   Miquel Raynal
• [PATCH v5 10/12] video: imx: Fix Makefile in order to be able to add other imx drivers   Miquel Raynal
• [PATCH v5 11/12] video: imx: Add LDB driver   Miquel Raynal
• [PATCH v5 12/12] video: imx: Add LCDIF driver   Miquel Raynal
• [PATCH v4 00/12] Add imx8mp video support   Miquel Raynal
• [PATCH v5 00/12] Add imx8mp video support   Miquel Raynal
• [PATCH v5 07/12] clk: imx8mp: Add media related clocks   Miquel Raynal
• [PATCH v5 01/12] core: ofnode: Fix a comment   Miquel Raynal
• [PATCH v4 00/12] Add imx8mp video support   Miquel Raynal
• [PATCH v4 00/12] Add imx8mp video support   Miquel Raynal
• [PATCH v1 1/2] ARM: tegra: clock: fix PLLD/PLLD2 related clock calculations   Thierry Reding
• [PATCH v1 1/2] ARM: tegra: clock: fix PLLD/PLLD2 related clock calculations   Thierry Reding
• [PATCH v2 0/4] USB-PD TCPM improvements   Sebastian Reichel
• [PATCH v2 0/4] USB-PD TCPM improvements   Sebastian Reichel
• [PATCH v2 0/4] Better smartphone support (Qualcomm)   Jens Reidel
• [PATCH] phycore_imx8mp: Rework some of the RAM related Kconfig symbols   Teresa Remmet
• Pull request: u-boot-rockchip-20250301   Tom Rini
• [PATCH v2 1/6] rsa: Add rsa_verify_openssl() to use openssl for host builds   Tom Rini
• Pull request efi-2025-04-rc4   Tom Rini
• [PATCH] feat: Add CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig   Tom Rini
• [PATCH] pci: dw_common: Set INCREASE_REGION_SIZE flag based on limit address   Tom Rini
• [PATCH v4 00/12] Add imx8mp video support   Tom Rini
• Pull request efi-2025-04-rc4   Tom Rini
• [GIT PULL] please pull fsl-qoriq-2025-3-3   Tom Rini
• [u-boot-test-hooks PATCH 1/2] labgrid-sjg: Add kea lab   Tom Rini
• (subset) [u-boot-test-hooks PATCH 1/3] labgrid: Deal with strange Python error   Tom Rini
• [PATCH] tiny-printf: emit \0 as %c   Tom Rini
• [PATCH 0/2] J784S4: Enable USB DFU boot, DFU flash and UMS configs   Tom Rini
• [PATCH v2] dma: ti: k3-udma: Avoid Memory leak issues during dma memcpy   Tom Rini
• [PATCH 0/2] arm: mach-k3: j722s: Enable ESM to support watchdogs   Tom Rini
• [PATCH] lib: ecdsa: fix prevent memory leak in ecdsa_add_verify_data   Tom Rini
• [PATCH 0/7] binman: Check code-coverage requirements   Tom Rini
• [PATCH 7/7] CI: Run code-coverage test for Binman   Tom Rini
• [PATCH] scripts/setlocalversion: Reinstate .scmversion support   Tom Rini
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Tom Rini
• [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
• xPL Proposal   Tom Rini
• [PATCH 1/2] vepxress64: disable CRC32 by default to prevent aborts   Tom Rini
• [PATCH 2/2] vepxress64: add guide for running FVP with TF-A   Tom Rini
• [PATCH v2] MAINTAINERS: Update contact information for Greg Malysa   Tom Rini
• [PATCH] miiphy: define mii_devs with LIST_HEAD()   Tom Rini
• [PATCH v1] board: verdin-am62: fix missing memory fixup call   Tom Rini
• [PATCH v2 0/5] Syncing up on skip-at-start   Tom Rini
• [PATCH] spi: Introduce initial eeprom driver mode support   Tom Rini
• [PATCH] configs: j784s4-am69: Enable UFS   Tom Rini
• [PATCH] lib: ecdsa: fix prevent memory leak in ecdsa_add_verify_data   Tom Rini
• [PATCH] net: dhcp6: Send DHCPv6 using multicast MAC   Tom Rini
• [PATCH] serial: Add missing TPL_SYS_NS16550_SERIAL symbol   Tom Rini
• [PATCH] sandbox_vpl: Enable missing TPL_DM_I2C symbol   Tom Rini
• [RFC PATCH] Kbuild: Always use $(PHASE_)   Tom Rini
• [PATCH 0/4] tools: Minor clean-ups for the command library   Tom Rini
• [PATCH] gpio: 74x146: depend on DM_SPI   Tom Rini
• [PATCH v2] led: fix next coverity scan error   Tom Rini
• (subset) [u-boot-test-hooks PATCH 1/3] labgrid: Deal with strange Python error   Tom Rini
• xPL Proposal   Tom Rini
• [RFC PATCH] Kbuild: Always use $(PHASE_)   Tom Rini
• [PATCH RFC/RFT 0/3] omap24xx_i2c: Enable Repeated Start functionality   Tom Rini
• [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Tom Rini
• Problems with test_net_pxe_get test   Tom Rini
• [PATCH v4 00/12] Add imx8mp video support   Tom Rini
• [PATCH] cmd: version: Get information about GCC and LD back   Tom Rini
• [PATCH v4 00/12] Add imx8mp video support   Tom Rini
• [RFC PATCH] Kbuild: Always use $(PHASE_)   Tom Rini
• [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
• [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Tom Rini
• [GIT PULL] amd/xilinx patches for v2025.04-rc4   Tom Rini
• [PATCH] MAINTAINERS: .mailmap: Update Sumit Garg's email address   Tom Rini
• [PATCH] mcheck: Fix SPDX License Identifier to LGPL-2.1-or-later   Tom Rini
• [PATCH] fs/squashfs: Fix memory leak in sqfs_size_nest()   Tom Rini
• [PATCH] scripts/checkpatch.pl: Upgrade IS_ENABLED_CONFIG to error for U-Boot   Tom Rini
• [PATCH RFC/RFT 0/3] omap24xx_i2c: Enable Repeated Start functionality   Tom Rini
• [PATCH 00/17] Various toolchain compatibility fixes/improvements   Tom Rini
• [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Tom Rini
• [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
• [PATCH 00/10] Improve pytest runtime   Tom Rini
• [PATCH 01/10] test/py: Rework test_cat to not use virt-make-fs   Tom Rini
• [PATCH 02/10] test/py: Rework test_xxd to not use virt-make-fs   Tom Rini
• [PATCH 03/10] test/py/tests: Move "setup_image" from test_ut.py to fs_helper.py   Tom Rini
• [PATCH 04/10] test/py: Fix two problems with setup_image   Tom Rini
• [PATCH 05/10] test/py: Rework test_efi_bootmgr to not use virt-make-fs   Tom Rini
• [PATCH 06/10] test/py: Rework test_eficonfig to not use virt-make-fs   Tom Rini
• [PATCH 07/10] test/py: Rework test_efi_capsule to not use virt-make-fs   Tom Rini
• [PATCH 08/10] test/py: Rework test_efi_secboot to not use virt-make-fs   Tom Rini
• [PATCH 09/10] doc/develop/py_testing.rst: Update section on filesystem images   Tom Rini
• [PATCH 10/10] Dockerfile: Update to drop virt-make-fs packages   Tom Rini
• [PATCH 09/10] doc/develop/py_testing.rst: Update section on filesystem images   Tom Rini
• [PATCH v4 29/47] test/py: Correct sizing of created disks   Tom Rini
• [PATCH RFC] doc: Include pytests directly in documentation   Tom Rini
• [PATCH v4 01/47] boot: Correct ramdisk address   Tom Rini
• [PATCH v4 00/47] x86: Improve operation under QEMU   Tom Rini
• [PATCH v4 46/47] RFC: test/py: Deal with timeouts   Tom Rini
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Tom Rini
• [PATCH v2 28/28] test: Add a test for booting Ubuntu 24.04   Tom Rini
• [PATCH 02/10] cmd: Kconfig: enable CMD_BOOTI for ARCH_K3   Tom Rini
• [PATCH 08/10] configs: ti_armv7_common: add cfgs for SPI falcon boot   Tom Rini
• [PATCH 09/10] config: add falcon boot config fragment for am62x   Tom Rini
• [PATCH 02/10] cmd: Kconfig: enable CMD_BOOTI for ARCH_K3   Tom Rini
• [PATCH v1 1/1] sandbox: swap bloblist and fdt loading address sequence   Tom Rini
• [PATCH v4 30/47] test/py: Add a helper to send characters   Tom Rini
• [PATCH v2 0/6] This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().   Tom Rini
• [PATCH 02/10] cmd: Kconfig: enable CMD_BOOTI for ARCH_K3   Tom Rini
• [PATCH 11/12] pytest: requirements.txt: Include setuptools   Tom Rini
• [PATCH] cmd: version: Get information about GCC and LD back   Tom Rini
• [PATCH 00/17] Various toolchain compatibility fixes/improvements   Tom Rini
• [PATCH 1/4] airoha: Add initial support for Airoha AN7581 SoC   Tom Rini
• [PATCH v1] config: falcon: move CFG_SYS_SPI_* to Kconfig   Tom Rini
• [RESEND PATCH 1/3] pci_auto: Downgrade prefetch if necessary   Tom Rini
• [PATCH 01/12] cmd: fs: Add generic mkdir implementation   Tom Rini
• [PATCH 02/12] cmd: fs: Add generic rm implementation   Tom Rini
• [PATCH 06/12] fs: exfat: Import libexfat from fuse-exfat   Tom Rini
• [PATCH 07/12] fs: exfat: Add U-Boot porting layer   Tom Rini
• [PATCH 0/4] airoha: Add initial support AN7581   Tom Rini
• [PATCH 09/12] fs: exfat: Demote filesystem detection failure message to debug()   Tom Rini
• [PATCH 12/12] test_fs: Add exfat tests   Tom Rini
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Tom Rini
• [RESEND PATCH 1/3] pci_auto: Downgrade prefetch if necessary   Tom Rini
• Pull request efi-next-20250310   Tom Rini
• [PULL] Pull request for u-boot master / v2025.04 = u-boot-stm32-20250310   Tom Rini
• [PATCH 11/12] pytest: requirements.txt: Include setuptools   Tom Rini
• [PATCH 12/12] test_fs: Add exfat tests   Tom Rini
• [PATCH 08/12] fs: exfat: Fix conversion overflow errors   Tom Rini
• [PATCH v5 7/8] env: Provide a work-around for unquoting fdtfile   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-next-20250310   Tom Rini
• [ANN] U-Boot v2025.04-rc4 released   Tom Rini
• Merge of v2025.04-rc4 in to next   Tom Rini
• [ANN] U-Boot v2025.04-rc4 released   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• Merge of v2025.04-rc4 in to next   Tom Rini
• [PATCH v1] spl: remove usage of CMD_(BOOTI|BOOTZ) from image parsing   Tom Rini
• [ANN] U-Boot v2025.04-rc4 released   Tom Rini
• Please pull net-next-20250310   Tom Rini
• [PATCH v2 1/3] Kbuild: Always use $(PHASE_)   Tom Rini
• [PATCH v2 2/3] doc/develop/codingstyle.rst: Add a section on conditional compilation   Tom Rini
• [PATCH v2 3/3] doc/develop/codingstyle.rst: Expand to include CONFIG_IS_ENABLED and PHASE_   Tom Rini
• [PULL] u-boot-sh/next   Tom Rini
• Please pull u-boot-tegra graph   Tom Rini
• Please pull u-boot-tegra staging   Tom Rini
• Please pull u-boot-tegra staging   Tom Rini
• [PATCH v3] spl: remove usage of CMD_BOOT[IZ] from image parsing   Tom Rini
• Please pull u-boot-tegra staging   Tom Rini
• [PATCH 1/3] pci_auto: Downgrade prefetch if necessary   Tom Rini
• [PATCH v3 00/12] drivers: Driver support for ADI SC5xx SoCs   Tom Rini
• [PATCH v2 1/3] binman: build_from_git: Add argument specifying branch   Tom Rini
• [GIT PULL] Please pull u-boot-imx-master-20250312   Tom Rini
• [PULL] Pull request for u-boot next / v2025.07 = u-boot-stm32-20250312   Tom Rini
• [PATCH v4] spl: remove usage of CMD_BOOT[IZ] from image parsing   Tom Rini
• [PATCH v2 1/3] Kbuild: Always use $(PHASE_)   Tom Rini
• [PATCH v2 2/3] doc/develop/codingstyle.rst: Add a section on conditional compilation   Tom Rini
• [PATCH v2 3/3] doc/develop/codingstyle.rst: Expand to include CONFIG_IS_ENABLED and PHASE_   Tom Rini
• [PATCH 02/19] arm: mach-k3: Kconfig: Add symbols for IO+DDR Low Power Mode   Tom Rini
• [RFC PATCH 1/4] cmd: fuse: Remove custom string functions   Tom Rini
• [RFC PATCH 2/4] cmd: fuse: Add fuse writebuff sub-system command   Tom Rini
• [RFC PATCH 3/4] drivers: k3_fuse: Add fuse sub-system func calls   Tom Rini
• [RFC PATCH 4/4] docs: fuse: Add fuse writebuff cmd docs   Tom Rini
• Pull request: rpi-2025.04   Tom Rini
• [PATCH 09/10] doc/develop/py_testing.rst: Update section on filesystem images   Tom Rini
• [PATCH] onenand: Remove ONENAND_BOOT option   Tom Rini
• [PATCH 0/5] Update DDR Configurations   Tom Rini
• [PATCH 1/2] arm: mach-sc5xx: Remove manual bss_clear   Tom Rini
• [PATCH v4 0/4] xPL-stack cleanup   Tom Rini
• [PATCH v2] configs: am65x_evm_r5_usbdfu_defconfig: Fix USB DFU boot   Tom Rini
• [PATCH] ARM: dts: imx: Drop bogus regulator extras on DH i.MX6 DHCOM DRC02   Tom Rini
• [PATCH] Dockerfile: Add missing 'rm -rf /tmp/coreboot-24.08'   Tom Rini
• [PATCH] tools: add HOSTCFLAGS from openssl pkg-config   Tom Rini
• [PATCH] test: event: Correct usage of IS_ENABLED() macro in test/common/event.c   Tom Rini
• [PATCH] mach-k3: common_fdt: create a reserved memory node   Tom Rini
• [PATCH] cmd: Drop last reference to CMD_REISERFS   Tom Rini
• [PATCH v2] board: ti: j784s4: Update Resource Management configs   Tom Rini
• [PATCH] memory: ti-gpmc: Alloc per driver private struct   Tom Rini
• [PATCH] lib: rsa: add NULL check for 'algo' in   Tom Rini
• [PATCH v2] Kconfig: Introduce CONFIG_WERROR   Tom Rini
• [PATCH] ARM: dts: imx: Drop bogus regulator extras on DH i.MX6 DHCOM DRC02   Tom Rini
• [EXTERNAL] Re: [RFC PATCH 1/4] cmd: fuse: Remove custom string functions   Tom Rini
• [PATCH v2 07/11] fs: exfat: Add U-Boot porting layer   Tom Rini
• [PATCH v2 11/11] test_fs: Add exfat tests   Tom Rini
• [PATCH] mmc: mmc_boot: support sandisk and micron emmc boot/rpmb partition resizing   Tom Rini
• [PATCH 2/2] mtd: spi-nor-core: Rework spansion_sr_ready() for parallel memories support   Tom Rini
• [PATCH v5] spl: remove usage of CMD_BOOT[IZ] from image parsing   Tom Rini
• [GIT PULL] Please pull u-boot-imx-next-20250313   Tom Rini
• [PATCH 2/2] u_boot_pylib: Clean up pylint warnings in gitutil.py   Tom Rini
• [PATCH v4 00/47] x86: Improve operation under QEMU   Tom Rini
• [PATCH v4 46/47] RFC: test/py: Deal with timeouts   Tom Rini
• [PATCH v1 0/1] video: edid: guard standard timings EDID expansion behind kconfig   Tom Rini
• [PATCH v1] common/memsize.c: Fix get_ram_size() original data restore   Tom Rini
• [RFC PATCH v2 2/5] doc: cmd: add documentation for fuse command   Tom Rini
• [resend v2 04/13] drivers: Enabled Kconfig and Makefile for i3c support   Tom Rini
• [resend v2 05/13] drivers: i3c: Enabled Kconfig and Makefile for DWI3C   Tom Rini
• [resend v2 06/13] drivers: i3c: Add i3c sandbox simple test.   Tom Rini
• [resend v2 09/13] cmd: Add i3c command support.   Tom Rini
• [resend v2 10/13] cmd: Enabled Kconfig and Makefile for DWI3C cmd support   Tom Rini
• [resend v2 12/13] configs: sandbox_defconfig: Enable configs for sandbox i3c   Tom Rini
• [PATCH v1 0/1] video: edid: guard standard timings EDID expansion behind kconfig   Tom Rini
• Pull request for mmu-next-14032025   Tom Rini
• [PATCH] disable mail for swarren   Tom Rini
• [PATCH v2 0/6] airoha: Add initial support AN7581   Tom Rini
• [PATCH v1] arm: dts: npcm7xx: correct the timer node   Tom Rini
• [PATCH] common: console: Delete obsolete VIDCONSOLE_AS_{LCD, NAME} options   Tom Rini
• [PATCH v2 0/2] Enable USB MSC Boot for AM62, AM62A and AM62P   Tom Rini
• [PATCH] lmb: change the return code on lmb_alloc_addr()   Tom Rini
• [PATCH 1/2] usb: ulpi: Remove unused omap-ulpi-viewport driver   Tom Rini
• [PATCH 2/2] usb: ulpi: Clean up how we enable support   Tom Rini
• [PATCH] mtd: nand: raw: Drop SYS_NAND_SOFT_ECC from NAND_SANDBOX   Tom Rini
• [PATCH] openpiton: riscv64: Drop unnecessary 'imply SPL_RISCV_MMODE'   Tom Rini
• [PATCH] x86: Correct usage of FSP_VERSION2   Tom Rini
• [PATCH] Kconfig: Do not "select OF_SEPARATE"   Tom Rini
• [PATCH] cmd: Correct dependency for CMD_LINK_LOCAL   Tom Rini
• [PATCH] ARM: socfpga: Drop incorrect imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION*   Tom Rini
• [PATCH] ARM: mvebu: Correct SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR usage   Tom Rini
• [PATCH] ARM: renesas: Drop 'imply MULTI_DTB_FIT_USER_DEFINED_AREA' lines   Tom Rini
• [PATCH] phycore_imx8mp: Rework some of the RAM related Kconfig symbols   Tom Rini
• [PATCH 1/2] arc: Rework Kconfig choice menus   Tom Rini
• [PATCH 2/2] arc: Migrate to SYS_{BIG,LITTLE}_ENDIAN fully   Tom Rini
• [PATCH] Kconfig: Fix "warning: style: quotes recommended" warnings   Tom Rini
• [PATCH v4 00/47] x86: Improve operation under QEMU   Tom Rini
• [RFC PATCH] Gitlab CI: Clean up more   Tom Rini
• [PATCH 2/2] u_boot_pylib: Clean up pylint warnings in gitutil.py   Tom Rini
• [PATCH 2/2] u_boot_pylib: Clean up pylint warnings in gitutil.py   Tom Rini
• Please pull u-boot-dm   Tom Rini
• [PATCH 1/2] imx8qxp: Do not use CONFIG_XPL_BUILD in device tree   Tom Rini
• [PATCH 0/6] MSM8916: Bring secondary cores online with spin-table   Tom Rini
• [PATCH] cmd: version: Get information about GCC and LD back   Tom Rini
• [RFC PATCH 1/4] cmd: fuse: Remove custom string functions   Tom Rini
• [PATCH v5 07/46] x86: Drop mpspec from the SPL build   Tom Rini
• [PATCH v5 09/46] x86: Drop use of CONFIG_REALMODE_DEBUG   Tom Rini
• [PATCH] common: spl: Enable Instruction cache after relocation in board_init_r   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• Pull request efi-2025-04-rc5   Tom Rini
• [PATCH] cmd: version: Get information about GCC and LD back   Tom Rini
• [RFC PATCH] Gitlab CI: Clean up more   Tom Rini
• [PULL] Please pull qcom-next-20250317   Tom Rini
• [PATCH v4 00/47] x86: Improve operation under QEMU   Tom Rini
• [PULL] u-boot-usb/next   Tom Rini
• Pull request for u-boot-nand-next External   Tom Rini
• [PATCH v3 0/6] lmb: miscellaneous fixes and improvements   Tom Rini
• [PATCH] ARM: socfpga: Drop incorrect imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION*   Tom Rini
• [PATCH v5 38/46] boot: Consider non-bootable partitions   Tom Rini
• [RFC PATCH v3 1/5] cmd: fuse: Remove custom string functions   Tom Rini
• [PATCH v4 00/47] x86: Improve operation under QEMU   Tom Rini
• [PATCH v5 38/46] boot: Consider non-bootable partitions   Tom Rini
• [EXTERNAL] Re: [RFC PATCH v3 1/5] cmd: fuse: Remove custom string functions   Tom Rini
• [PATCH] board: beagle: Add support for BeagleY-AI   Tom Rini
• [PATCH] serial: Add missing TPL_SYS_NS16550_SERIAL symbol   Tom Rini
• [PATCH] sandbox_vpl: Enable missing TPL_DM_I2C symbol   Tom Rini
• [PATCH 0/2] vepxpress64: disable CRC32 by default and add FVP with TF-A guide   Tom Rini
• [PATCH 00/13] *** Various Improvements for phyCORE-AM62/A SoMs ***   Tom Rini
• [PATCH v2] configs: j784s4-am69: Enable UFS   Tom Rini
• [PATCH 1/1] scripts: typos in event_dump.py   Tom Rini
• [PATCH] qconfig: Correct unhashable-type error with --scan-source   Tom Rini
• [PATCH 1/1] dumpimage: fix handling of StarFive SPL too long   Tom Rini
• [PATCH] checkpatch.pl: Report an error for CONFIG_xPL_BUILD in device trees   Tom Rini
• [GIT PULL] Please pull u-boot-amlogic-20250318 into next   Tom Rini
• [GIT PULL] Please pull u-boot-ufs-next-20250318   Tom Rini
• [PATCH 1/2] arc: Rework Kconfig choice menus   Tom Rini
• [PATCH v5 00/29] pxe: Precursor series for supporting read_all() in extlinux / PXE   Tom Rini
• [PATCH 6/6] lib: Provide a signed version of simple_itoa()   Tom Rini
• [PATCH 3/6] test: Add a test for strim()   Tom Rini
• [PATCH 09/17] test/py: Add a test image for Ubuntu   Tom Rini
• [PATCH 1/5] cmd: fuse: Remove custom string functions   Tom Rini
• [PATCH 00/52] expo: Various features and improvements   Tom Rini
• [PATCH 09/17] test/py: Add a test image for Ubuntu   Tom Rini
• [PATCH 6/6] lib: Provide a signed version of simple_itoa()   Tom Rini
• [PATCH 3/6] test: Add a test for strim()   Tom Rini
• [PATCH v5 38/46] boot: Consider non-bootable partitions   Tom Rini
• [PATCH] tiny-printf: Add support for upper case hex values   Tom Rini
• [PATCH v2 00/10] Improve pytest runtime   Tom Rini
• [PATCH v2 01/10] test/py: Rework test_cat to not use virt-make-fs   Tom Rini
• [PATCH v2 02/10] test/py: Rework test_xxd to not use virt-make-fs   Tom Rini
• [PATCH v2 03/10] test/py/tests: Move "setup_image" from test_ut.py to fs_helper.py   Tom Rini
• [PATCH v2 04/10] test/py: Fix a problem with setup_image   Tom Rini
• [PATCH v2 05/10] test/py: Rework test_efi_bootmgr to not use virt-make-fs   Tom Rini
• [PATCH v2 06/10] test/py: Rework test_eficonfig to not use virt-make-fs   Tom Rini
• [PATCH v2 07/10] test/py: Rework test_efi_capsule to not use virt-make-fs   Tom Rini
• [PATCH v2 08/10] test/py: Rework test_efi_secboot to not use virt-make-fs   Tom Rini
• [PATCH v2 09/10] doc/develop/py_testing.rst: Update section on filesystem images   Tom Rini
• [PATCH v2 10/10] Dockerfile: Update to drop virt-make-fs packages   Tom Rini
• [PATCH 3/6] test: Add a test for strim()   Tom Rini
• [PATCH] tiny-printf: Add support for upper case hex values   Tom Rini
• [PATCH 00/52] expo: Various features and improvements   Tom Rini
• [PATCH v5 38/46] boot: Consider non-bootable partitions   Tom Rini
• [PULL] u-boot-sh/next   Tom Rini
• [PATCH v1] board: verdin-am62: remove spl_perform_fixups   Tom Rini
• [PATCH] tiny-printf: Add support for upper case hex values   Tom Rini
• [PATCH V2] tiny-printf: Improve %X formatting   Tom Rini
• [GIT PULL] Please pull u-boot-imx-next-20250321   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-20250321   Tom Rini
• [PATCH] cmd: pmic: add fall through comment   Tom Rini
• [PATCH 3/3] arm: dts: am335x: Add nodes for lcdc, panel and backlight   Tom Rini
• [PATCH 1/3] mux: Kconfig: Add Kconfig options for MUX_MMIO   Tom Rini
• [PATCH v2] cmd: pmic: add fall through comment   Tom Rini
• [PATCH] lmb: change the return code on lmb_alloc_addr()   Tom Rini
• [PULL] Please pull qcom-next-20250324   Tom Rini
• [ANN] U-Boot v2025.04-rc5 released   Tom Rini
• Updated invitation: U-Boot community meeting @ Tue Apr 1, 2025 9am - 10am (CST) (u-boot at lists.denx.de)   Tom Rini
• [ANN] U-Boot v2025.04-rc5 released   Tom Rini
• [PATCH 00/52] expo: Various features and improvements   Tom Rini
• [PATCH 1/8] env: Rename OVERWRITE_ETHADDR_ONCE to ENV_OVERWRITE_ETHADDR_ONCE   Tom Rini
• [PATCH 2/8] env: Rename SYS_REDUNDAND_ENVIRONMENT to ENV_REDUNDAND_ENVIRONMENT   Tom Rini
• [PATCH 3/8] env: Rename SYS_RELOC_GD_ENV_ADDR to ENV_RELOC_GD_ENV_ADDR   Tom Rini
• [PATCH] common: console: move break; statement   Tom Rini
• [GIT PULL] u-boot-riscv/next   Tom Rini
• [GIT PULL] Please pull u-boot-imx-next-20250325   Tom Rini
• [GIT PULL] u-boot-riscv/master   Tom Rini
• [PATCH 4/8] env: Rename SYS_MMC_ENV_DEV to ENV_SDMMC_DEVICE_INDEX   Tom Rini
• [PATCH] test: lmb: fix the lmb_alloc_addr() based test cases   Tom Rini
• Pull request for efi-master-26032025 urgent   Tom Rini
• Pull request for efi-next-26032025   Tom Rini
• Please pull u-boot-tegra staging   Tom Rini
• [PATCH v4 00/12] Add imx8mp video support   Tom Rini
• [PATCH 00/52] expo: Various features and improvements   Tom Rini
• [PATCH v4 00/29] arm: Support building as an EFI app   Tom Rini
• [PATCH 4/8] env: Rename SYS_MMC_ENV_DEV to ENV_SDMMC_DEVICE_INDEX   Tom Rini
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Tom Rini
• [PATCH 00/18] Annotate switch/case fallthrough cases   Tom Rini
• [PATCH v5 00/12] Add imx8mp video support   Tom Rini
• [PATCH v4 00/12] Add imx8mp video support   Tom Rini
• [PATCH 1/3] fastboot: lift restrictions on !NET_LWIP for USB   Tom Rini
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Tom Rini
• [PATCH] toradex: apalis-imx6: Fix build failure when CONFIG_VIDEO_IPUV3 is enabled   Tom Rini
• [PATCH 18/18] [DO NOT MERGE] Makefile: enable switch/case fallthrough warnings   Tom Rini
• [PATCH v3 29/31] RFC: Revert "bloblist: Load the bloblist from the previous loader"   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Tom Rini
• [PATCH v5 38/46] boot: Consider non-bootable partitions   Tom Rini
• [PATCH 00/52] expo: Various features and improvements   Tom Rini
• [PATCH 2/2] env: point fdt address to the fdt in a bloblist   Tom Rini
• [PATCH 2/2] env: point fdt address to the fdt in a bloblist   Tom Rini
• [PATCH 0/4] bloblist: fdt: Clean up the code   Tom Rini
• [PATCH 2/2] env: point fdt address to the fdt in a bloblist   Tom Rini
• [PATCH] dtc: introduce label relative path references   Tom Rini
• [PATCH 01/18] spl: mmc: properly annotate fallthrough   Tom Rini
• [PATCH v3 19/31] rockchip: Provide a VPL phase on rk3399   Tom Rini
• [PATCH 00/52] expo: Various features and improvements   Tom Rini
• [PATCH v3 1/2] CI: Move default image under global defaults   Tom Rini
• [PATCH] board: ti: am335x: Fix selection of BeagleBone Green   Tom Rini
• [PATCH v1] board: starfive: Remove compatible boards Milk-V Mars CM and Mars CM Lite   Tom Rini
• [PATCH] MAINTAINERS: Update email of Mattijs Korpershoek   Tom Rini
• Pull request: u-boot-sunxi/next for next   Tom Rini
• [PULL] u-boot-sh/next   Tom Rini
• Please pull u-boot-tegra fixes   Tom Rini
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Tom Rini
• [PATCH 6/6] lib: Provide a signed version of simple_itoa()   Tom Rini
• [PATCH 09/17] test/py: Add a test image for Ubuntu   Tom Rini
• [PATCH v2 00/56] expo: Various features and improvements   Tom Rini
• [PATCH v2 00/56] expo: Various features and improvements   Tom Rini
• [PATCH 0/2] Clarify DM_FLAG_PROBE_AFTER_BIND behaviour   Tom Rini
• [PATCH 1/1] test: use truncate in mk_fs()   Tom Rini
• [PATCH] arm: mediatek: remove wmcpu-reserved at 50000000 node from mt7987 dts   Tom Rini
• [PATCH 1/2] pwm: mediatek: add pwm support for MediaTek MT7987 SoC   Tom Rini
• [PATCH] configs: am64x_evm_a53_defconfig: Enable support for UMS   Tom Rini
• [PATCH] board: ti: am62px: rm-cfg: Add support for HC BCDMA   Tom Rini
• [PATCH v2] config: falcon: move CFG_SYS_SPI_* to Kconfig   Tom Rini
• [PATCH v3] spl: return header size to spl_load in os boot   Tom Rini
• [PATCH 2/2] env: point fdt address to the fdt in a bloblist   Tom Rini
• [PATCH] toradex: apalis-imx6: Fix build failure when CONFIG_VIDEO_IPUV3 is enabled   Tom Rini
• [PATCH 04/18] use proper fallthrough annotations   Tom Rini
• [PATCH 13/18] arm: mach-k3: am62p: annotate switch/case fallthrough   Tom Rini
• Rate of innovation in the project (Was: Re: Rate of change in the project)   Tom Rini
• [PATCH 05/18] net/net: fix switch/case fallthrough annotations   Tom Rini
• [PATCH 09/18] usb: xhci: annotate switch/case fallthrough properly   Tom Rini
• [PATCH 10/18] video: annotate switch/case fall-through   Tom Rini
• [PATCH 14/18] mtd: spi-nor-tiny: annotate switch/case fallthrough   Tom Rini
• [PATCH 16/18] cmd: pmic: annotate switch/case fallthrough   Tom Rini
• [PATCH 17/18] cmd: spl: annotate switch/case fallthrough   Tom Rini
• [PATCH 02/18] zlib: annotate switch/case fallthrough cases   Tom Rini
• [PATCH v4 1/1] efi_loader: expose the device-tree file name   Tom Rini
• [PATCH 00/17] bootstd: Useability improvements   Tom Rini
• [PATCH 07/17] bootstd: Fully complete iteration of a uclass   Tom Rini
• [PATCH 06/17] bootstd: Try all bootmeths on the final partition   Tom Rini
• [PATCH 01/17] fs: boot: Update fs_read_alloc() to use abuf   Tom Rini
• [RFC PATCH] docker: add ADI build-related tools to docker image   Tom Rini
• Please pull net-20250314   Tom Rini
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Tom Rini
• [PATCH] tools: add HOSTCFLAGS from openssl pkg-config   Peter Robinson
• [PATCH v2 0/4] USB-PD TCPM improvements   Peter Robinson
• [PATCH] feat: Add CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig   Peter Robinson
• Pull request: rpi-2025.04   Peter Robinson
• Pull request: rpi-2025.04   Peter Robinson
• [PATCH v1 00/10] video: tegra: migrations, HDMI and HOST1x   Peter Robinson
• [PATCH v1 00/10] video: tegra: migrations, HDMI and HOST1x   Peter Robinson
• [PATCH v2 0/4] Better smartphone support (Qualcomm)   Peter Robinson
• [PATCH] arm64: Add MIDR entries for Cortex-A55, A73 and A75   Peter Robinson
• [PATCH v2] arm64: Add MIDR entries for Cortex-A55, A73 and A75   Peter Robinson
• [PATCH v3 19/31] rockchip: Provide a VPL phase on rk3399   Peter Robinson
• [PATCH] dtc: introduce label relative path references   Peter Robinson
• [PATCH v1 2/5] video: rename tegra20 to tegra   Peter Robinson
• [PATCH v3 07/14] cyclic: invoke uthread_schedule() from schedule()   Stefan Roese
• [PATCH] configs: mvebu_espressobin_ultra-88f3720_defconfig: disable SATA   Stefan Roese
• [PATCH] ARM: mvebu: Correct SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR usage   Stefan Roese
• [PATCH 19/34] watchdog: sunxi: add A523 support   Stefan Roese
• [PATCH] ubi: fix bug creating partitions for non-existent volumes   Alexey Romanov
• [PATCH v4 03/11] ARM: dts: socfpga: add Mercury+ AA1 for u-boot dts   Lothar Rubusch
• [PATCH] efi_loader: Install the ACPI table from the bloblist   Patrick Rudolph
• [RESEND PATCH 1/3] pci_auto: Downgrade prefetch if necessary   Patrick Rudolph
• [RESEND PATCH 2/3] emulation: qemu-sbsa: Select SYS_PCI_64BIT   Patrick Rudolph
• [RESEND PATCH 3/3] emulation: qemu-sbsa: Enable PCI enumeration   Patrick Rudolph
• [RESEND PATCH 1/3] pci_auto: Downgrade prefetch if necessary   Patrick Rudolph
• [PATCH 1/5] acpi_table: Fix IORT RC node   Patrick Rudolph
• [PATCH 2/5] acpi_table: Add asserts in IORT   Patrick Rudolph
• [PATCH 3/5] acpi: Clear reserved bits in IORT   Patrick Rudolph
• [PATCH 4/5] acpi: Conditionally set mapping_offset in IORT   Patrick Rudolph
• [PATCH 5/5] test: acpi: Add IORT tests   Patrick Rudolph
• [PATCH 1/3] arm: gic-v3: Scan for subnodes   Patrick Rudolph
• [PATCH 2/3] emulation: qemu-sbsa: Move ITS node into GICv3 node   Patrick Rudolph
• [PATCH 3/3] emulation: qemu-sbsa: Fill in correct ITS ID   Patrick Rudolph
• [PATCH 0/6] MSM8916: Bring secondary cores online with spin-table   Konstantin Ryabitsev
• [PATCH v4 00/12] Add imx8mp video support   Svyatoslav Ryhel
• [PATCH v4 00/12] Add imx8mp video support   Svyatoslav Ryhel
• [PATCH v1 0/1] common: edid: update timing selection logic   Svyatoslav Ryhel
• [PATCH v1 1/1] common: edid: update timing selection logic   Svyatoslav Ryhel
• [PATCH v1 0/2] Tegra: general improvements   Svyatoslav Ryhel
• [PATCH v1 1/2] ARM: tegra: clock: fix PLLD/PLLD2 related clock calculations   Svyatoslav Ryhel
• [PATCH v1 2/2] ARM: tegra20: mark second DC with bootph-all   Svyatoslav Ryhel
• [PATCH v1 1/2] ARM: tegra: clock: fix PLLD/PLLD2 related clock calculations   Svyatoslav Ryhel
• [PATCH v1 1/2] ARM: tegra: clock: fix PLLD/PLLD2 related clock calculations   Svyatoslav Ryhel
• [PATCH v1 0/1] sandbox: swap bloblist and fdt loading address sequence   Svyatoslav Ryhel
• [PATCH v1 1/1] sandbox: swap bloblist and fdt loading address sequence   Svyatoslav Ryhel
• [PATCH v1 1/1] sandbox: swap bloblist and fdt loading address sequence   Svyatoslav Ryhel
• [PATCH v1 1/1] sandbox: swap bloblist and fdt loading address sequence   Svyatoslav Ryhel
• [PATCH v2 0/1] sandbox: swap bloblist and fdt loading address sequence   Svyatoslav Ryhel
• [PATCH v2 1/1] sandbox: remap memory load addresses   Svyatoslav Ryhel
• [PATCH v2 0/1] common: edid: update timing selection logic   Svyatoslav Ryhel
• [PATCH v2 1/1] common: edid: update timing selection logic   Svyatoslav Ryhel
• [PATCH v1 1/2] ARM: tegra: clock: fix PLLD/PLLD2 related clock calculations   Svyatoslav Ryhel
• [PATCH v1 0/6] tegra: devices: add 3 second delay before power off   Svyatoslav Ryhel
• [PATCH v1 1/6] configs: transformer: add 3 second delay before power off   Svyatoslav Ryhel
• [PATCH v1 2/6] configs: endeavoru: add 3 second delay before power off   Svyatoslav Ryhel
• [PATCH v1 3/6] configs: grouper: add 3 second delay before power off   Svyatoslav Ryhel
• [PATCH v1 4/6] configs: picasso: add 3 second delay before power off   Svyatoslav Ryhel
• [PATCH v1 5/6] configs: x3_t30: add 3 second delay before power off   Svyatoslav Ryhel
• [PATCH v1 6/6] configs: qc750: add 3 second delay before power off   Svyatoslav Ryhel
• Please pull u-boot-tegra graph   Svyatoslav Ryhel
• Please pull u-boot-tegra staging   Svyatoslav Ryhel
• [PATCH v1 00/10] video: tegra: migrations, HDMI and HOST1x   Svyatoslav Ryhel
• [PATCH v1 01/10] video: tegra20: implement a minimal HOST1X driver for essential clock and reset setup   Svyatoslav Ryhel
• [PATCH v1 02/10] video: tegra20: provide driver support for the HDMI controller   Svyatoslav Ryhel
• [PATCH v1 03/10] video: tegra20: dc: add video bridge support   Svyatoslav Ryhel
• [PATCH v1 04/10] video: tegra20: dc: convert to use of_graph   Svyatoslav Ryhel
• [PATCH v1 05/10] video: tegra20: dc: get DSI/HDMI clock parent if internal DSI/HDMI is used   Svyatoslav Ryhel
• [PATCH v1 06/10] video: tegra20: dc: remove unused video operations   Svyatoslav Ryhel
• [PATCH v1 07/10] video: tegra20: dc: support binding child devices   Svyatoslav Ryhel
• [PATCH v1 08/10] video: tegra20: pwm-backlight: convert into DC child   Svyatoslav Ryhel
• [PATCH v1 09/10] video: tegra20: dsi: convert to video bridge UCLASS   Svyatoslav Ryhel
• [PATCH v1 10/10] video: tegra20: dsi: respect speed mode used for DSI commands transfer   Svyatoslav Ryhel
• [PATCH v1 00/13] video: bridge: migrations and fixes   Svyatoslav Ryhel
• [PATCH v1 01/13] video: bridge: dp501: convert to video bridge UCLASS   Svyatoslav Ryhel
• [PATCH v1 02/13] video: bridge: tc358768: convert to video bridge UCLASS   Svyatoslav Ryhel
• [PATCH v1 03/13] video: bridge: tc358768: convert to use of_graph   Svyatoslav Ryhel
• [PATCH v1 04/13] video: bridge: tc358768: simplify power supplies request   Svyatoslav Ryhel
• [PATCH v1 05/13] video: bridge: tc358768: remove need in clock name   Svyatoslav Ryhel
• [PATCH v1 06/13] video: bridge: ssd2825: convert to video bridge UCLASS   Svyatoslav Ryhel
• [PATCH v1 07/13] video: bridge: ssd2825: convert to use of_graph   Svyatoslav Ryhel
• [PATCH v1 08/13] video: bridge: ssd2825: move post configuration from transfer function   Svyatoslav Ryhel
• [PATCH v1 09/13] video: bridge: ssd2825: add HS delays configuration   Svyatoslav Ryhel
• [PATCH v1 10/13] video: bridge: ssd2825: make pixel format calculation more obvious   Svyatoslav Ryhel
• [PATCH v1 11/13] video: bridge: ssd2825: set default minimum tx_clk   Svyatoslav Ryhel
• [PATCH v1 12/13] video: bridge: ssd2825: add power supplies   Svyatoslav Ryhel
• [PATCH v1 13/13] video: bridge: ssd2825: fix reset gpio direction   Svyatoslav Ryhel
• [PATCH v1 00/11] video: panel: various panel fixes   Svyatoslav Ryhel
• [PATCH v1 01/11] video: endeavoru-panel: move backlight request after probe   Svyatoslav Ryhel
• [PATCH v1 02/11] video: endeavoru-panel: add missing LPM flag   Svyatoslav Ryhel
• [PATCH v1 03/11] video: lg-ld070wx3: add missing LPM flag   Svyatoslav Ryhel
• [PATCH v1 04/11] video: renesas-r61307: add missing mode flags   Svyatoslav Ryhel
• [PATCH v1 05/11] video: renesas-r61307: adjust compatible   Svyatoslav Ryhel
• [PATCH v1 06/11] video: renesas-r61307: fix reset gpio direction   Svyatoslav Ryhel
• [PATCH v1 07/11] video: renesas-r69328: add missing mode flags   Svyatoslav Ryhel
• [PATCH v1 08/11] video: renesas-r69328: fix reset gpio direction   Svyatoslav Ryhel
• [PATCH v1 09/11] video: renesas-r69328: add power supplies   Svyatoslav Ryhel
• [PATCH v1 10/11] video: samsung-ltl106hl02: add missing LPM flag   Svyatoslav Ryhel
• [PATCH v1 11/11] video: sharp-lq101r1sx01: add missing LPM flag   Svyatoslav Ryhel
• [PATCH v1 0/3] video: backlight: lm3533: improve configurability of device   Svyatoslav Ryhel
• [PATCH v1 1/3] video: backlight: lm3533: add more flexibility with device tree   Svyatoslav Ryhel
• [PATCH v1 2/3] video: backlight: lm3533: configure core in the probe   Svyatoslav Ryhel
• [PATCH v1 3/3] video: backlight: lm3533: set up backlight according to device tree   Svyatoslav Ryhel
• Please pull u-boot-tegra staging   Svyatoslav Ryhel
• [PATCH v1 0/1] board: tegra30: ouya: add basic support for Ouya Game Console   Svyatoslav Ryhel
• [PATCH v1 1/1] board: ouya: add Ouya Game Console support   Svyatoslav Ryhel
• [PATCH v2 1/1] common: edid: update timing selection logic   Svyatoslav Ryhel
• [PATCH v1 00/10] video: tegra: migrations, HDMI and HOST1x   Svyatoslav Ryhel
• [PATCH v1 00/10] video: tegra: migrations, HDMI and HOST1x   Svyatoslav Ryhel
• [PATCH v1 0/1] video: edid: guard standard timings EDID expansion behind kconfig   Svyatoslav Ryhel
• [PATCH v1 1/1] video: edid: guard standard timings EDID expansion behind kconfig   Svyatoslav Ryhel
• [PATCH v1 0/4] ARM: tegra: update bindings to fit video changes   Svyatoslav Ryhel
• [PATCH v1 1/4] ARM: tegra: lg_x3: upgrade bindings   Svyatoslav Ryhel
• [PATCH v1 2/4] ARM: tegra: endeavoru: upgrade bindings   Svyatoslav Ryhel
• [PATCH v1 3/4] ARM: tegra: p1801-t: enable HDMI   Svyatoslav Ryhel
• [PATCH v1 4/4] ARM: tegra: tf700t: upgrade bindings   Svyatoslav Ryhel
• [PATCH v1 0/4] pinctrl: tegra: minor driver fixes   Svyatoslav Ryhel
• [PATCH v1 1/4] pinctrl: tegra: adjust default values of pins   Svyatoslav Ryhel
• [PATCH v1 2/4] pinctrl: tegra: adjust pin state lists   Svyatoslav Ryhel
• [PATCH v1 3/4] pinctrl: tegra20: fix function naming mismatches   Svyatoslav Ryhel
• [PATCH v1 4/4] ARM: tegra: dts: fix lock, io-reset and open-drain properties   Svyatoslav Ryhel
• [PATCH v2 0/1] board: tegra30: ouya: add basic support for Ouya Game Console   Svyatoslav Ryhel
• [PATCH v2 1/1] board: ouya: add Ouya Game Console support   Svyatoslav Ryhel
• [PATCH v1 0/1] video: edid: guard standard timings EDID expansion behind kconfig   Svyatoslav Ryhel
• [PATCH 0/4] Support UART over MicroSD slot on Transformer T20   Svyatoslav Ryhel
• [PATCH 0/4] Support UART over MicroSD slot on Transformer T20   Svyatoslav Ryhel
• [PATCH v5 01/12] core: ofnode: Fix a comment   Svyatoslav Ryhel
• [PATCH v5 03/12] dm: core: Add a helper to retrieve devices through graph endpoints   Svyatoslav Ryhel
• Please pull u-boot-tegra staging   Svyatoslav Ryhel
• [PATCH v1 0/2] Add missing SPL_HAVE_INIT_STACK for ouya and mocha   Svyatoslav Ryhel
• [PATCH v1 1/2] configs: ouya: add missing SPL_HAVE_INIT_STACK option   Svyatoslav Ryhel
• [PATCH v1 2/2] configs: mocha: add missing SPL_HAVE_INIT_STACK option   Svyatoslav Ryhel
• Please pull u-boot-tegra fixes   Svyatoslav Ryhel
• [PATCH v1 0/1] spi: tegra: fix CS polarity setup   Svyatoslav Ryhel
• [PATCH v1 1/1] spi: tegra20_slink: fix CS polarity setup   Svyatoslav Ryhel
• [PATCH v1 0/2] ARM: tegra: fix PLLD/D2 relates configurations   Svyatoslav Ryhel
• [PATCH v1 1/2] ARM: tegra: clock: take in account PLLD/D2 enable bit on clock_set_rate   Svyatoslav Ryhel
• [PATCH v1 2/2] ARM: tegra: clock: fix PLLD2 info table entry on Tegra124 and Tegra210   Svyatoslav Ryhel
• [PATCH v1 0/1] sysreset: add PHASE_ to GPIO reset and poweroff configs   Svyatoslav Ryhel
• [PATCH v1 1/1] sysreset: add PHASE_ to GPIO reset and poweroff configs   Svyatoslav Ryhel
• [PATCH v1 0/5] video: tegra: adjust namings and paths   Svyatoslav Ryhel
• [PATCH v1 1/5] video: tegra20: dsi: add Tegra20 support   Svyatoslav Ryhel
• [PATCH v1 2/5] video: rename tegra20 to tegra   Svyatoslav Ryhel
• [PATCH v1 3/5] video: move tegra124 into common tegra dir   Svyatoslav Ryhel
• [PATCH v1 4/5] video: tegra: drop prefix from file names   Svyatoslav Ryhel
• [PATCH v1 5/5] video: tegra: adjust DC and DSI config names   Svyatoslav Ryhel
• [PATCH v1 0/6] tegra20: add Atrix 4G MB860 and Droid X2 MB870 support   Svyatoslav Ryhel
• [PATCH v1 1/6] power: pmic: add the basic CPCAP PMIC support   Svyatoslav Ryhel
• [PATCH v1 2/6] power: regulator: add regulator support for CPCAP PMIC   Svyatoslav Ryhel
• [PATCH v1 3/6] input: add support for CPCAP power button   Svyatoslav Ryhel
• [PATCH v1 4/6] video: panel: add Motorola Atrix 4G and Droid X2 panel   Svyatoslav Ryhel
• [PATCH v1 5/6] video: backlight: add TI LM3532 led controller   Svyatoslav Ryhel
• [PATCH v1 6/6] board: motorola: add Atrix 4G MB860 and Droid X2 MB870 support   Svyatoslav Ryhel
• [PATCH v1 2/5] video: rename tegra20 to tegra   Svyatoslav Ryhel
• [PATCH v2 1/3] tegra: add funcmux for exposing UART over uSD slot on Tegra 20   Svyatoslav Ryhel
• [PATCH v2 2/3] tegra: respect CONFIG_TEGRA_ENABLE_UART* options on Transformer T20   Svyatoslav Ryhel
• [PATCH v2 3/3] tegra: allow to expose UART on microSD slot   Svyatoslav Ryhel
• [RFC PATCH] pinctrl: tegra: detect unknown/invalid pin/func configurations   Svyatoslav Ryhel
• [PATCH 0/4] Support UART over MicroSD slot on Transformer T20   Svyatoslav Ryhel
• [RFC PATCH] pinctrl: tegra: detect unknown/invalid pin/func configurations   Svyatoslav Ryhel
• [PATCH v1 1/1] sysreset: add PHASE_ to GPIO reset and poweroff configs   Svyatoslav Ryhel
• [PATCH v1 1/1] sysreset: add PHASE_ to GPIO reset and poweroff configs   Svyatoslav Ryhel
• [PATCH] configs: am64x_evm_a53_defconfig: Enable support for UMS   Hrushikesh Salunke
• [PATCH v3] configs: am65x_evm_r5_usbdfu_defconfig: Fix USB DFU boot   Hrushikesh Salunke
• Unexpected RPi5 Behavior with Saved U-Boot Environment   Mauro Salvini
• Unexpected RPi5 Behavior with Saved U-Boot Environment   Mauro Salvini
• boottime->efi_allocate_pages() returning EFI_NOT_FOUND   Ben Schneider
• boottime->efi_allocate_pages() returning EFI_NOT_FOUND   Ben Schneider
• boottime->efi_allocate_pages() returning EFI_NOT_FOUND   Ben Schneider
• boottime->efi_allocate_pages() returning EFI_NOT_FOUND   Ben Schneider
• [PATCH] lmb: change the return code on lmb_alloc_addr()   Ben Schneider
• [PATCH] lmb: change the return code on lmb_alloc_addr()   Ben Schneider
• [PATCH 00/19] am62: IO+DDR resume support   Markus Schneider-Pargmann
• [PATCH 01/19] arm: mach-k3: Remove CANUART IO isolation   Markus Schneider-Pargmann
• [PATCH 02/19] arm: mach-k3: Kconfig: Add symbols for IO+DDR Low Power Mode   Markus Schneider-Pargmann
• [PATCH 03/19] ram: k3-ddrss: Add support for DDR in self-refresh   Markus Schneider-Pargmann
• [PATCH 04/19] firmware: ti_sci: Add TI_SCI_MSG_MIN_CONTEXT_RESTORE   Markus Schneider-Pargmann
• [PATCH 05/19] arm: mach-k3: common: Add CANUART wakeup check helpers   Markus Schneider-Pargmann
• [PATCH 06/19] arm: mach-k3: common: Add lpm_resume_from_ddr   Markus Schneider-Pargmann
• [PATCH 07/19] arm: mach-k3: common: Helper for LPM meta data address from DT   Markus Schneider-Pargmann
• [PATCH 08/19] arm: mach-k3: am62a7_init: Resume on LPM exit   Markus Schneider-Pargmann
• [PATCH 09/19] arm: mach-k3: am62p5_init: Resume on LPM exit   Markus Schneider-Pargmann
• [PATCH 10/19] arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc node   Markus Schneider-Pargmann
• [PATCH 11/19] arm64: dts: ti: k3-am62a-wakeup: Add R5F device node   Markus Schneider-Pargmann
• [PATCH 12/19] arm64: dts: ti: k3-am62a-main: Add C7xv device node   Markus Schneider-Pargmann
• [PATCH 13/19] arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors   Markus Schneider-Pargmann
• [PATCH 14/19] arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors   Markus Schneider-Pargmann
• [PATCH 15/19] arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors   Markus Schneider-Pargmann
• [PATCH 16/19] arm: dts: k3-am62a: Add r5 device nodes   Markus Schneider-Pargmann
• [PATCH 17/19] arm: dts: k3-am62p: Add r5 device nodes   Markus Schneider-Pargmann
• [PATCH 18/19] configs: am62ax_evm_r5: Enable IODDR resume support   Markus Schneider-Pargmann
• [PATCH 19/19] configs: am62p_evm_r5_defconfig: Enable IODDR resume support   Markus Schneider-Pargmann
• [PATCH 00/19] am62: IO+DDR resume support   Markus Schneider-Pargmann
• [PATCH 02/19] arm: mach-k3: Kconfig: Add symbols for IO+DDR Low Power Mode   Markus Schneider-Pargmann
• [PATCH RFC/RFT 0/3] omap24xx_i2c: Enable Repeated Start functionality   Heiko Schocher
• [PATCH RFC/RFT 1/3] i2c: omap24xx_i2c: Use new function __omap24_i2c_xfer_msg()   Heiko Schocher
• [PATCH RFC/RFT 2/3] i2c: omap24xx_i2c: support CONFIG_I2C_REPEATED_START in DM_I2C xfer   Heiko Schocher
• [PATCH v3 06/12] i2c: Add support for ADI SC5XX-family I2C peripheral   Heiko Schocher
• [PATCH v2 1/4] i2c: omap24xx_i2c: Remove unused CONFIG_I2C_REPEATED_START   Heiko Schocher
• [PATCH v2 2/4] i2c: omap24xx_i2c: Use new function __omap24_i2c_xfer_msg()   Heiko Schocher
• [PATCH v2 3/4] i2c: omap24xx_i2c: support CONFIG for repeated start in DM_I2C xfer   Heiko Schocher
• [PATCH v2 4/4] drivers: i2c: Kconfig: Add CONFIG_SYS_I2C_OMAP24XX_REPEATED_START   Heiko Schocher
• [PATCH] sunxi: pmic_bus: Move SPL I2C addresses into Kconfig   Heiko Schocher
• block devices on MTD and UBI   Heiko Schocher
• block devices on MTD and UBI   Heiko Schocher
• [PATCH v2] ubi: fix bug creating partitions for non-existent volumes   Heiko Schocher
• [PATCH 12/18] mtd: ubi: annotate fallthrough   Heiko Schocher
• Pull request efi-2025-04-rc4   Heinrich Schuchardt
• [PATCH 1/1] riscv: qemu: imply CONFIG_RNG_RISCV_ZKR   Heinrich Schuchardt
• [PATCH 8/8] efi_loader: efi_net: Add support for multiple efi_net_obj   Heinrich Schuchardt
• [PATCH 0/8] EFI net driver - series 1/2: Support multiple EFI net objects   Heinrich Schuchardt
• [PATCH 0/5] common: clean up usage of structure jmp_buf_data   Heinrich Schuchardt
• [PATCH 1/5] sandbox: remove linux/types.h dependency in setjmp.h   Heinrich Schuchardt
• [PATCH 2/5] arm: include asm-generic/int-ll64.h in setjmp.h   Heinrich Schuchardt
• [PATCH 3/5] common: clean up setjmp.h   Heinrich Schuchardt
• [PATCH 4/5] efi_loader: Clean up usage of structure jmp_buf_data   Heinrich Schuchardt
• [PATCH 5/5] arm: use type jmp_buf instead of struct jmp_buf_data   Heinrich Schuchardt
• [PATCH] lib: correct description of CONFIG_SYS_FDT_PAD   Heinrich Schuchardt
• [PATCH] efi: Make FDT extra space configurable   Heinrich Schuchardt
• [PATCH 2/5] arm: include asm-generic/int-ll64.h in setjmp.h   Heinrich Schuchardt
• Pull request efi-2025-04-rc4   Heinrich Schuchardt
• [PATCH 1/1] dumpimage: fix handling of StarFive SPL too long   Heinrich Schuchardt
• boottime->efi_allocate_pages() returning EFI_NOT_FOUND   Heinrich Schuchardt
• [PATCH v2 1/6] net: lwip: extend wget to support CA (root) certificates   Heinrich Schuchardt
• [PATCH] efi_loader: Install the ACPI table from the bloblist   Heinrich Schuchardt
• [PATCH RFC] doc: Include pytests directly in documentation   Heinrich Schuchardt
• [PATCH 1/1] test: use truncate in mk_fs()   Heinrich Schuchardt
• Re: [PATCH 09/10] doc/develop/py_testing.rst: Update section on filesystem images   Heinrich Schuchardt
• [PATCH v5 06/29] x86: Move the bootm state for zimage into cmd/   Heinrich Schuchardt
• [PATCH v5 07/29] bootstd: Correct display of kernel version   Heinrich Schuchardt
• [PATCH v5 15/29] boot: arm: riscv: sandbox: Add a format for the booti file   Heinrich Schuchardt
• [PATCH v2 1/1] cmd: simplify eficonfig_init()   Heinrich Schuchardt
• [PATCH v2 8/8] efi_loader: efi_net: Add support for multiple efi_net_obj   Heinrich Schuchardt
• Pull request efi-next-20250310   Heinrich Schuchardt
• [PATCH v2] net: miiphybb: Update documentation   Heinrich Schuchardt
• [PATCH v7 1/8] efi_loader: remove unused code from copy_fdt()   Heinrich Schuchardt
• [PATCH v1 3/3] booti/bootm: riscv: Verify image arch type   Heinrich Schuchardt
• [PATCH v8 4/8] efi_loader: add a function to remove memory from the EFI map   Heinrich Schuchardt
• [PATCH v8 2/8] efi_loader: install device-tree on configuration table on every invocation   Heinrich Schuchardt
• [PATCH v8 3/8] fdt: add support for adding pmem nodes   Heinrich Schuchardt
• [PATCH v8 5/8] efi_loader: preserve installer images in pmem   Heinrich Schuchardt
• [PATCH v8 6/8] blkmap: store type of blkmap slice in corresponding structure   Heinrich Schuchardt
• [PATCH v8 7/8] blkmap: add an attribute to preserve the mem mapping   Heinrich Schuchardt
• [PATCH v8 8/8] blkmap: pass information on ISO image to the OS   Heinrich Schuchardt
• [PATCH v8 2/8] efi_loader: install device-tree on configuration table on every invocation   Heinrich Schuchardt
• [PATCH v8 8/8] blkmap: pass information on ISO image to the OS   Heinrich Schuchardt
• [PATCH 08/12] fs: exfat: Fix conversion overflow errors   Heinrich Schuchardt
• [PATCH 06/12] fs: exfat: Import libexfat from fuse-exfat   Heinrich Schuchardt
• Re: [PATCH v2 00/15] Various toolchain compatibility fixes/improvements   Heinrich Schuchardt
• [PATCH v2 12/15] efi_loader: Move .dynamic out of .text in EFI   Heinrich Schuchardt
• [PATCH v2 11/15] arm: riscv: efi: Export _start symbol from crt0_*_efi stubs   Heinrich Schuchardt
• Pull request efi-2025-04-rc5   Heinrich Schuchardt
• [PATCH 6/6] lib: Provide a signed version of simple_itoa()   Heinrich Schuchardt
• [PATCH v5 45/46] acpi: Support checking checksums   Heinrich Schuchardt
• [PATCH v5 44/46] test: acpi: Correct memory leaks   Heinrich Schuchardt
• [PATCH v5 43/46] acpi: Add a checksum to the DMAR table   Heinrich Schuchardt
• [PATCH v5 45/46] acpi: Support checking checksums   Heinrich Schuchardt
• [PATCH] net: remove commented out line   Heinrich Schuchardt
• [PATCH 0/5] acpi: simplify updating ACPI table header checksum   Heinrich Schuchardt
• [PATCH 1/5] acpi: new function acpi_update_checksum()   Heinrich Schuchardt
• [PATCH 2/5] acpi: simplify updating header checksum   Heinrich Schuchardt
• [PATCH 3/5] x86/acpi: simplify updating header checksum   Heinrich Schuchardt
• [PATCH 4/5] qemu-sbsa: simplify updating ACPI table header checksum   Heinrich Schuchardt
• [PATCH 5/5] arm: simplify updating ACPI table header checksum   Heinrich Schuchardt
• [PATCH] efi_loader: fix ipv4 device path node conversion   Heinrich Schuchardt
• [PATCH] cmd: pmic: add fall through comment   Heinrich Schuchardt
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Heinrich Schuchardt
• [PATCH v2] cmd: pmic: add fall through comment   Heinrich Schuchardt
• [PATCH 1/1] doc: correct references to overlay-fdt-boot.txt   Heinrich Schuchardt
• [PATCH] part_efi: cache last scanned GPT for next partition   Heinrich Schuchardt
• [PATCH 00/18] Annotate switch/case fallthrough cases   Heinrich Schuchardt
• [PATCH v4 1/1] efi_loader: expose the device-tree file name   Heinrich Schuchardt
• [PATCH] efi_loader: remove EFI_BOUNCE_BUFFER   Heinrich Schuchardt
• [PATCH v1] efi_loader: Handle GD_FLG_SKIP_RELOC   Heinrich Schuchardt
• [PATCH v2 14/24] clk: clk-composite: Resolve parent clock by name   Heinrich Schuchardt
• [PATCH v2 14/24] clk: clk-composite: Resolve parent clock by name   Heinrich Schuchardt
• [PATCH 1/1] riscv: dts: jh7110: add bootph-pre-ram for &pllclk   Heinrich Schuchardt
• [PATCH v2 0/8] board: starfive: DeepComputing FML13V01   Heinrich Schuchardt
• [PATCH v2 1/8] configs: add jh7110-deepcomputing-fml13v01 to VF2 defconfig   Heinrich Schuchardt
• [PATCH v2 2/8] riscv: dts: jh7110: add DeepComputing FML13V01 device-tree   Heinrich Schuchardt
• [PATCH v2 3/8] board: starfive: DeepComputing FML13V01 fdt selection   Heinrich Schuchardt
• [PATCH v2 4/8] board: starfive: spl: support DeepComputing FML13V01   Heinrich Schuchardt
• [PATCH v2 5/8] doc: add DeepComputing FML13V01 documentation   Heinrich Schuchardt
• [PATCH v2 6/8] doc: starfive: use consistent formatting   Heinrich Schuchardt
• [PATCH v2 7/8] doc: starfive: use jh7110_common.rst   Heinrich Schuchardt
• [PATCH v2 8/8] doc: jh7110: describe debug UART   Heinrich Schuchardt
• [PATCH v4 1/1] efi_loader: expose the device-tree file name   Heinrich Schuchardt
• [PATCH 1/8] arm: dts: k3-am625-phyboard-lyra-rdk: Add boot phase tag to phy_gmii_sel   Daniel Schultz
• [PATCH 1/3] configs: phycore_am64x_a53_defconfig: Enable remoteproc cmd   Daniel Schultz
• [PATCH 2/3] configs: phycore_am62x_a53_defconfig: Enable remoteproc cmd   Daniel Schultz
• [PATCH 3/3] configs: phycore_am62x_a53_defconfig: Enable gpio   Daniel Schultz
• [PATCH v3] arm64: renesas: Add TFA BL31 handoff support on Renesas R-Car Gen4   Quentin Schulz
• [PATCH] lib: ecdsa: fix prevent memory leak in ecdsa_add_verify_data   Quentin Schulz
• [PATCH] lib: ecdsa: fix prevent memory leak in ecdsa_add_verify_data   Quentin Schulz
• [PATCH 2/2] Makefile.lib: Set xPL build related defines for DTB build   Quentin Schulz
• [PATCH 2/2] Makefile.lib: Set xPL build related defines for DTB build   Quentin Schulz
• [PATCH 08/12] fs: exfat: Fix conversion overflow errors   Quentin Schulz
• [PATCH v2 1/1] common: edid: update timing selection logic   Quentin Schulz
• [PATCH v2 1/3] Kbuild: Always use $(PHASE_)   Quentin Schulz
• [PATCH v2 2/3] doc/develop/codingstyle.rst: Add a section on conditional compilation   Quentin Schulz
• [PATCH v2 3/3] doc/develop/codingstyle.rst: Expand to include CONFIG_IS_ENABLED and PHASE_   Quentin Schulz
• [PATCH 3/3] env: mmc: fix offsets relative to the end of the partition   Quentin Schulz
• [PATCH v2 3/3] doc/develop/codingstyle.rst: Expand to include CONFIG_IS_ENABLED and PHASE_   Quentin Schulz
• [PATCH 1/2] imx8qxp: Do not use CONFIG_XPL_BUILD in device tree   Quentin Schulz
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Quentin Schulz
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Quentin Schulz
• [PATCH] tiny-printf: Add support for upper case hex values   Quentin Schulz
• [PATCH] cmd: fuse: add switch for quiet operation   Quentin Schulz
• [PATCH 1/8] env: Rename OVERWRITE_ETHADDR_ONCE to ENV_OVERWRITE_ETHADDR_ONCE   Quentin Schulz
• [PATCH 2/8] env: Rename SYS_REDUNDAND_ENVIRONMENT to ENV_REDUNDAND_ENVIRONMENT   Quentin Schulz
• [PATCH 4/8] env: Rename SYS_MMC_ENV_DEV to ENV_SDMMC_DEVICE_INDEX   Quentin Schulz
• [PATCH 5/8] env: Rename SYS_MMC_ENV_PART to ENV_SDMMC_EMMC_HW_PARTITION   Quentin Schulz
• [PATCH 6/8] env: Rename ENV_MMC_PARTITION to ENV_SDMMC_SW_PARTITION   Quentin Schulz
• [PATCH 2/8] env: Rename SYS_REDUNDAND_ENVIRONMENT to ENV_REDUNDAND_ENVIRONMENT   Quentin Schulz
• [PATCH] arm64: zynqmp: Use CONFIG_SPL_FS_LOAD_PAYLOAD_NAME in binman   Quentin Schulz
• [PATCH] log: Add helpers for calling log_msg_ret() et al   Quentin Schulz
• [PATCH 4/8] env: Rename SYS_MMC_ENV_DEV to ENV_SDMMC_DEVICE_INDEX   Quentin Schulz
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Quentin Schulz
• [PATCH] arm64: zynqmp: Use CONFIG_SPL_FS_LOAD_PAYLOAD_NAME in binman   Quentin Schulz
• [PATCH v1 1/1] sysreset: add PHASE_ to GPIO reset and poweroff configs   Quentin Schulz
• [PATCH v1 1/1] sysreset: add PHASE_ to GPIO reset and poweroff configs   Quentin Schulz
• [EXTERNAL] Re: [RFC PATCH 1/2 v1] arch: arm: Kconfig: Add config to use subnode's bootph property for binding drivers   Moteen Shah
• [EXTERNAL] Re: [RFC PATCH 1/2 v1] arch: arm: Kconfig: Add config to use subnode's bootph property for binding drivers   Moteen Shah
• [RFC PATCH 0/1 v2] Propagate bootph* property to all parent nodes   Moteen Shah
• [RFC PATCH 1/2 v2] tools: binman: control.py: Propagate bootph-* properties to supernodes   Moteen Shah
• [RFC PATCH 2/2 v2] tools: binman: ftest.py: Add testcase for bootph-* propagation   Moteen Shah
• [PATCH v1] board: starfive: Remove compatible boards Milk-V Mars CM and Mars CM Lite   E Shattow
• does spl in falcon mode support decompressing the linux kernel?   Ilya Shpoliansky
• [PATCH 2/2] power: regulator: add qcom-usb-vbus   Rui Miguel Silva
• [PATCH v4 1/3] xilinx: dfu: Fill directly update_info.dfu_string   Michal Simek
• [PATCH] xilinx: Remove tftp block size 4096   Michal Simek
• [PATCH v2] xilinx: Remove tftp block size 4096   Michal Simek
• [GIT PULL] amd/xilinx patches for v2025.04-rc4   Michal Simek
• [PATCH] cmd: version: Get information about GCC and LD back   Michal Simek
• [PATCH v2 4/4] board/BuR/zynq: initial commit   Michal Simek
• [PATCH v2 4/4] board/BuR/zynq: initial commit   Michal Simek
• [PATCH] cmd: version: Get information about GCC and LD back   Michal Simek
• [PATCH] cmd: version: Get information about GCC and LD back   Michal Simek
• [PATCH] spi: cadence_ospi: Add device reset via OSPI controller   Michal Simek
• [PATCH v2] amd: versal2: Add the UFS boot mode support   Michal Simek
• [PATCH] xilinx: versal: add firmware access to PMC multi Boot mode register   Michal Simek
• [PATCH] spi: cadence_ospi: Add device reset via OSPI controller   Michal Simek
• [PATCH 1/2] xilinx: Allow alternative boot strategies in zynq-common.h   Michal Simek
• [PATCH 1/2] xilinx: Allow alternative boot strategies in zynq-common.h   Michal Simek
• [PATCH 2/2] topic: Use distro_boot for topic-miami boards   Michal Simek
• [PATCH] serial: Setup default base and frequency for Versal platforms   Michal Simek
• [PATCH] arm64: versal2: Disable debug console   Michal Simek
• [PATCH] xilinx: Allow alternative boot strategies in zynq-common.h   Michal Simek
• [PATCH] cmd: version: Get information about GCC and LD back   Michal Simek
• [PATCH 1/1] drivers: fpga: Add partial reconfiguration console commands   Michal Simek
• [RFC PATCH] cmd: fwu: Dump custom fields from mdata structure   Michal Simek
• [PATCH v2] spi: cadence_ospi: Add device reset via OSPI controller   Michal Simek
• [PATCH] arm64: zynqmp: Use CONFIG_SPL_FS_LOAD_PAYLOAD_NAME in binman   Michal Simek
• [PATCH v2 1/2] xilinx: Allow alternative boot strategies in zynq-common.h   Michal Simek
• [PATCH] serial: Setup default base and frequency for Versal platforms   Michal Simek
• [PATCH] arm64: versal2: Disable debug console   Michal Simek
• [PATCH] arm64: versal2: Disable DEBUG uart for mini configurations   Michal Simek
• [PATCH] arm64: versal2: Update the text base and dtb address   Michal Simek
• [PATCH] ufs: amd-versal2: Use raw read/write for SLCR/CACHE registers   Michal Simek
• [RFC PATCH] cmd: fwu: Dump custom fields from mdata structure   Michal Simek
• [PATCH v2] cmd: fwu: Dump custom fields from mdata structure   Michal Simek
• [PATCH] topic: zynqmp: Remove zynqmp-xilinx-xdp platform   Michal Simek
• [PATCH] arm64: zynqmp: Use CONFIG_SPL_FS_LOAD_PAYLOAD_NAME in binman   Michal Simek
• [PATCH] arm64: versal2: Disable DEBUG uart for mini configurations   Michal Simek
• [PATCH] arm64: versal2: Update the text base and dtb address   Michal Simek
• [PATCH] ufs: amd-versal2: Use raw read/write for SLCR/CACHE registers   Michal Simek
• [PATCH] arm64: zynqmp: Use CONFIG_SPL_FS_LOAD_PAYLOAD_NAME in binman   Michal Simek
• [PATCH] common: console: Delete obsolete VIDCONSOLE_AS_{LCD, NAME} options   Dragan Simic
• [PATCH] sunxi: mmc: Improve reset procedure   Jernej Skrabec
• [PATCH 0/2] sunxi: h616: fix DRAM size detection   Jernej Skrabec
• [PATCH 1/2] sunxi: h616: dram: Rework size detection   Jernej Skrabec
• [PATCH 2/2] sunxi: H616: dram: Improve address wrapping detection   Jernej Skrabec
• [PATCH] x86: spl: Add support for NVMe boot device   Naresh Solanki
• [PATCH] imx8m: soc: cope with existing optee node   Vincent Stehlé
• [PATCH] imx8m: soc: cope with existing optee node   Vincent Stehlé
• [PATCH] ata: ahci: remove bad free   Vincent Stehlé
• [PATCH] efi_loader: fix ipv4 device path node conversion   Vincent Stehlé
• Pull request efi-next-20250104   Heiko Stübner
• [Uboot-stm32] [PATCH 1/5] dm: pwm: Check if duty_ns is lower than period_ns   Cheick TRAORE
• Building separate SPL with U-boot   Ali Tariq
• [PATCH v2 0/4] Better smartphone support (Qualcomm)   Danila Tikhonov
• [PATCH 0/5] Add support for STM32 TIMERS and STM32 PWM   Cheick Traore
• [PATCH 1/5] dm: pwm: Check if duty_ns is lower than period_ns   Cheick Traore
• [PATCH 2/5] mach-stm32: add multifunction timer driver support   Cheick Traore
• [PATCH 3/5] pwm: stm32: add driver to support pwm with timer   Cheick Traore
• [PATCH 4/5] configs: stm32mp13: Enable MFD timer and PWM for stm32mp13_defconfig   Cheick Traore
• [PATCH 5/5] ARM: dts: stm32: Add TIMERS inverted PWM channel 3 on STM32MP135F-DK   Cheick Traore
• [PATCH v2 0/4] Add support for STM32 TIMERS and STM32 PWM   Cheick Traore
• [PATCH v2 1/4] mach-stm32: add multifunction timer driver support   Cheick Traore
• [PATCH v2 2/4] pwm: stm32: add driver to support pwm with timer   Cheick Traore
• [PATCH v2 3/4] configs: stm32mp13: Enable MFD timer and PWM for stm32mp13_defconfig   Cheick Traore
• [PATCH v2 4/4] ARM: dts: stm32: Add TIMERS inverted PWM channel 3 on STM32MP135F-DK   Cheick Traore
• [PATCH 01/10] clk: imx6q: Properly handle imx6qp ESPI clk_sels   Michael Nazzareno Trimarchi
• [PATCH 01/10] clk: imx6q: Properly handle imx6qp ESPI clk_sels   Michael Nazzareno Trimarchi
• [resend v2 00/19] Add Cadence NAND Driver support   Michael Nazzareno Trimarchi
• [resend v3 00/19] Add Cadence NAND Driver support   Michael Nazzareno Trimarchi
• [RESEND PATCH] clk: fix crash on clk_set_rate clean rate cache   Michael Nazzareno Trimarchi
• Pull request for u-boot-nand-next External   Michael Nazzareno Trimarchi
• [PATCH v1] mtd: rawnand: meson: always use OOB bytes during write   Michael Nazzareno Trimarchi
• [resend v2 00/19] Add Cadence NAND Driver support   Michael Nazzareno Trimarchi
• [PATCH 15/18] mtd: rawnand: nand_base: annotate switch/case fallthrough   Michael Nazzareno Trimarchi
• [PATCH] rockchip: io-domain: Enable by default for all supported SoCs   Chen-Yu Tsai
• [PATCH v2 3/4] net: ravb: Add RZ/G2L Support   Geert Uytterhoeven
• [PATCH 0/2] Enable USB MSC Boot for AM62, AM62A and AM62P   Siddharth Vadapalli
• [PATCH 1/2] configs: am62x_r5: introduce fragment for USB MSC boot   Siddharth Vadapalli
• [PATCH v2 0/2] Enable USB MSC Boot for AM62, AM62A and AM62P   Siddharth Vadapalli
• [PATCH v2 1/2] configs: am62x_r5: introduce fragment for USB MSC boot   Siddharth Vadapalli
• [PATCH v2 2/2] configs: am62x_a53: introduce fragment for USB MSC boot   Siddharth Vadapalli
• [PATCH v3 01/15] net: ti: am65-cpsw-nuss: Define bind method for CPSW driver   Vankar, Chintan
• [PATCH 01/13] net: tftp: Increase TFTP pkt string length to include null character   Chintan Vankar
• [PATCH 01/11] net: miiphybb: Split off struct bb_miiphy_bus_ops   Marek Vasut
• [PATCH 02/11] net: miiphybb: Wrap driver side bb_miiphy_read/write() accessors   Marek Vasut
• [PATCH 03/11] net: miiphybb: Pass struct bb_miiphy_bus_ops directly to bb_miiphy_read/write()   Marek Vasut
• [PATCH 04/11] net: miiphybb: Pass struct mii_dev directly to bb_miiphy_read/write()   Marek Vasut
• [PATCH 05/11] net: miiphybb: Drop priv from struct bb_miiphy_bus   Marek Vasut
• [PATCH 06/11] net: designware: Switch back to mdio_alloc()   Marek Vasut
• [PATCH 07/11] net: ravb: Switch back to mdio_alloc()   Marek Vasut
• [PATCH 08/11] net: sh_eth: Switch back to mdio_alloc()   Marek Vasut
• [PATCH 09/11] arm: mvebu: a38x: Switch back to mdio_alloc()   Marek Vasut
• [PATCH 10/11] net: miiphybb: Drop bb_miiphy_alloc()/bb_miiphy_free() and struct bb_miiphy_bus   Marek Vasut
• [PATCH 11/11] net: miiphybb: Drop mdio_init()   Marek Vasut
• [PATCH] ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC rev.200 board   Marek Vasut
• [PATCH] scripts/setlocalversion: Reinstate .scmversion support   Marek Vasut
• [PATCH v3] arm64: renesas: Add TFA BL31 handoff support on Renesas R-Car Gen4   Marek Vasut
• [PATCH] arm64: renesas: Enable fallback PSCI on Renesas R-Car R8A779G0 V4H White Hawk   Marek Vasut
• [PATCH v6 0/8] Add Starfive JH7110 Cadence USB driver   Marek Vasut
• [PATCH v1] mailbox: add i.MX Messaging Unit (MU) driver   Marek Vasut
• Re: 回复: [EXT] Re: [PATCH v4 10/20] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Marek Vasut
• Re: 回复: 回复: 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Marek Vasut
• Re: 回复: [PATCH v6 02/20] firmware: scmi: smt: Interrupt communication enable   Marek Vasut
• Re: 回复: [PATCH v6 01/20] mailbox: add i.MX Messaging Unit (MU) driver   Marek Vasut
• Re: 回复: [PATCH v6 03/20] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Marek Vasut
• Re: 回复: [PATCH v6 10/20] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Marek Vasut
• [PATCH v3 15/23] net: ravb: Allocate bb_miiphy using bb_miiphy_alloc() and fill in callbacks   Marek Vasut
• [PATCH 01/11] net: miiphybb: Split off struct bb_miiphy_bus_ops   Marek Vasut
• Re: 回复: [PATCH v1] mailbox: add i.MX Messaging Unit (MU) driver   Marek Vasut
• [PATCH] scripts/setlocalversion: Reinstate .scmversion support   Marek Vasut
• [PATCH] scripts/setlocalversion: Reinstate .scmversion support   Marek Vasut
• [PATCH] scripts/setlocalversion: Reinstate .scmversion support   Marek Vasut
• [PATCH v3] arm64: renesas: Add TFA BL31 handoff support on Renesas R-Car Gen4   Marek Vasut
• [PATCH] clk: rzg2l: Ignore disable for core clocks   Marek Vasut
• [PATCH 1/3] net: ravb: Add dependency on CONFIG_BITBANGMII   Marek Vasut
• [PATCH 2/3] net: ravb: Fix RX frame size limit   Marek Vasut
• [PATCH 3/3] net: ravb: Fix error handling in ravb_probe   Marek Vasut
• [PATCH 1/5] reset: rzg2l-usbphy-ctrl: Add new driver   Marek Vasut
• [PATCH 2/5] regulator: rzg2l-usbphy: Add new driver   Marek Vasut
• [PATCH 3/5] reset: rzg2l-usbphy-ctrl: Connect up vbus regulator   Marek Vasut
• [PATCH 4/5] phy: rcar: Support RZ/G2L USB PHY   Marek Vasut
• [PATCH 2/3] net: ravb: Fix RX frame size limit   Marek Vasut
• [PATCH] net: miiphybb: Update documentation   Marek Vasut
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Marek Vasut
• [PATCH 01/11] net: miiphybb: Split off struct bb_miiphy_bus_ops   Marek Vasut
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Marek Vasut
• [PATCH 00/12] fs: exfat: Add exfat port based on exfat-fuse   Marek Vasut
• [PATCH 01/12] cmd: fs: Add generic mkdir implementation   Marek Vasut
• [PATCH 02/12] cmd: fs: Add generic rm implementation   Marek Vasut
• [PATCH 03/12] test_fs: Allow testing FS_GENERIC   Marek Vasut
• [PATCH 04/12] linux: Add generic struct stat {}   Marek Vasut
• [PATCH 05/12] fs: Add generic fs_devread() implementation   Marek Vasut
• [PATCH 06/12] fs: exfat: Import libexfat from fuse-exfat   Marek Vasut
• [PATCH 07/12] fs: exfat: Add U-Boot porting layer   Marek Vasut
• [PATCH 08/12] fs: exfat: Fix conversion overflow errors   Marek Vasut
• [PATCH 09/12] fs: exfat: Demote filesystem detection failure message to debug()   Marek Vasut
• [PATCH 10/12] configs: sandbox: Enable exfat support   Marek Vasut
• [PATCH 11/12] pytest: requirements.txt: Include setuptools   Marek Vasut
• [PATCH 12/12] test_fs: Add exfat tests   Marek Vasut
• [PATCH v2] net: miiphybb: Update documentation   Marek Vasut
• [RFC][PATCH] net: miiphybb: Convert documentation to rst   Marek Vasut
• [PATCH] net: miiphybb: Update documentation   Marek Vasut
• [PATCH] ARM: stm32mp: Fix dram_bank_mmu_setup() for ram_top=0   Marek Vasut
• Re: 回复: 回复: [EXT] Re: [PATCH v4 10/20] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Marek Vasut
• Re: 回复: 回复: 回复: 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Marek Vasut
• Re: 回复: 回复: [PATCH v6 02/20] firmware: scmi: smt: Interrupt communication enable   Marek Vasut
• Re: 回复: 回复: [PATCH v1] mailbox: add i.MX Messaging Unit (MU) driver   Marek Vasut
• [PATCH v2] mailbox: add i.MX Messaging Unit (MU) driver   Marek Vasut
• [PATCH 07/12] fs: exfat: Add U-Boot porting layer   Marek Vasut
• [PATCH 12/12] test_fs: Add exfat tests   Marek Vasut
• [PATCH 08/12] fs: exfat: Fix conversion overflow errors   Marek Vasut
• [PATCH 11/12] pytest: requirements.txt: Include setuptools   Marek Vasut
• [PATCH 11/12] pytest: requirements.txt: Include setuptools   Marek Vasut
• [PATCH 12/12] test_fs: Add exfat tests   Marek Vasut
• [PATCH 08/12] fs: exfat: Fix conversion overflow errors   Marek Vasut
• [ANN] U-Boot v2025.04-rc4 released   Marek Vasut
• [PATCH] ARM: dts: imx: Drop bogus regulator extras on DH i.MX6 DHCOM DRC02   Marek Vasut
• [PULL] u-boot-sh/next   Marek Vasut
• [PATCH v2 00/11] fs: exfat: Add exfat port based on exfat-fuse   Marek Vasut
• [PATCH v2 01/11] cmd: fs: Add generic mkdir implementation   Marek Vasut
• [PATCH v2 02/11] cmd: fs: Add generic rm implementation   Marek Vasut
• [PATCH v2 03/11] test_fs: Allow testing FS_GENERIC   Marek Vasut
• [PATCH v2 04/11] linux: Add generic struct stat {}   Marek Vasut
• [PATCH v2 05/11] fs: Add generic fs_devread() implementation   Marek Vasut
• [PATCH v2 06/11] fs: exfat: Import libexfat from fuse-exfat   Marek Vasut
• [PATCH v2 07/11] fs: exfat: Add U-Boot porting layer   Marek Vasut
• [PATCH v2 08/11] fs: exfat: Fix conversion overflow errors   Marek Vasut
• [PATCH v2 09/11] fs: exfat: Demote filesystem detection failure message to debug()   Marek Vasut
• [PATCH v2 10/11] configs: sandbox: Enable exfat support   Marek Vasut
• [PATCH v2 11/11] test_fs: Add exfat tests   Marek Vasut
• [PATCH] ARM: dts: imx: Drop bogus regulator extras on DH i.MX6 DHCOM DRC02   Marek Vasut
• [PATCH] ARM: renesas: Drop stale common Makefile description   Marek Vasut
• [PATCH] arm64: renesas: Drop stale R-Car V4H SPL implementation description   Marek Vasut
• [PATCH 1/7] arm64: dts: renesas: Make OTP available in SPL on R8A779G0 V4H   Marek Vasut
• [PATCH 2/7] ram: renesas: dbsc5: Fix bitrate MD pin parsing   Marek Vasut
• [PATCH 3/7] ram: renesas: dbsc5: Fix JS1 index calculation   Marek Vasut
• [PATCH 4/7] ram: renesas: dbsc5: Fix DBTR11 calculation   Marek Vasut
• [PATCH 5/7] ram: renesas: dbsc5: Synchronize initialization code to rev.1.10   Marek Vasut
• [PATCH 6/7] ram: renesas: dbsc5: Add V4H-3/V4H-5/V4H-7 OTP based detection   Marek Vasut
• [PATCH 7/7] ram: renesas: dbsc5: Make struct renesas_dbsc5_board_config public   Marek Vasut
• [PATCH v2 11/11] test_fs: Add exfat tests   Marek Vasut
• [PATCH v3 00/11] fs: exfat: Add exfat port based on exfat-fuse   Marek Vasut
• [PATCH v3 01/11] cmd: fs: Add generic mkdir implementation   Marek Vasut
• [PATCH v3 02/11] cmd: fs: Add generic rm implementation   Marek Vasut
• [PATCH v3 03/11] test_fs: Allow testing FS_GENERIC   Marek Vasut
• [PATCH v3 04/11] linux: Add generic struct stat {}   Marek Vasut
• [PATCH v3 05/11] fs: Add generic fs_devread() implementation   Marek Vasut
• [PATCH v3 06/11] fs: exfat: Import libexfat from fuse-exfat   Marek Vasut
• [PATCH v3 07/11] fs: exfat: Add U-Boot porting layer   Marek Vasut
• [PATCH v3 08/11] fs: exfat: Fix conversion overflow errors   Marek Vasut
• [PATCH v3 09/11] fs: exfat: Demote filesystem detection failure message to debug()   Marek Vasut
• [PATCH v3 10/11] configs: sandbox: Enable exfat support   Marek Vasut
• [PATCH v3 11/11] test_fs: Add exfat tests   Marek Vasut
• [PULL] u-boot-usb/next   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH v7 0/8] Add Starfive JH7110 Cadence USB driver   Marek Vasut
• [PATCH v1] MAINTAINERS: Add USB driver file to visionfive2 maintain files.   Marek Vasut
• [PATCH v4 10/14] dm: usb: move bus initialization into new static function usb_init_bus()   Marek Vasut
• [PATCH 1/4] cpu: imx8_cpu: Print Speed grade if IMX_THERMAL or IMX_TMU   Marek Vasut
• [PATCH v2 1/5] reset: rzg2l-usbphy-ctrl: Add new driver   Marek Vasut
• [PATCH v2 5/5] renesas_rzg2l_smarc_defconfig: Enable USB support   Marek Vasut
• [PATCH 1/5] reset: rzg2l-usbphy-ctrl: Add new driver   Marek Vasut
• [PATCH 3/3] net: ravb: Fix error handling in ravb_probe   Marek Vasut
• [PATCH 3/3] net: ravb: Fix error handling in ravb_probe   Marek Vasut
• [PATCH v2] net: miiphybb: Update documentation   Marek Vasut
• [PATCH 00/24] clk: Add clk_resolve_parent_clk() and fix up iMX clock drivers   Marek Vasut
• [PATCH 01/24] clk: Add clk_resolve_parent_clk()   Marek Vasut
• [PATCH 02/24] clk: clk-mux: Fold clk_register_mux()   Marek Vasut
• [PATCH 03/24] clk: clk-mux: Use struct udevice instead of struct device   Marek Vasut
• [PATCH 04/24] clk: clk-mux: Resolve parent clock by name   Marek Vasut
• [PATCH 05/24] clk: imx: Pass struct udevice into imx_clk_mux*()   Marek Vasut
• [PATCH 06/24] clk: imx: Pass struct udevice to clk_register_mux()   Marek Vasut
• [PATCH 07/24] clk: clk-gate: Use struct udevice instead of struct device   Marek Vasut
• [PATCH 08/24] clk: clk-gate: Resolve parent clock by name   Marek Vasut
• [PATCH 09/24] clk: imx: gate2: Use struct udevice instead of struct device   Marek Vasut
• [PATCH 10/24] clk: imx: gate2: Resolve parent clock by name   Marek Vasut
• [PATCH 11/24] clk: imx: Pass struct udevice into imx_clk_gate*()   Marek Vasut
• [PATCH 12/24] clk: imx: Pass struct udevice to clk_register_gate*()   Marek Vasut
• [PATCH 13/24] clk: clk-composite: Use struct udevice instead of struct device   Marek Vasut
• [PATCH 14/24] clk: clk-composite: Resolve parent clock by name   Marek Vasut
• [PATCH 15/24] clk: imx: Pass struct udevice into imx_clk_composite*()   Marek Vasut
• [PATCH 16/24] clk: imx: Convert clock-osc-* back to osc_*   Marek Vasut
• [PATCH 17/24] clk: imx: Pass struct udevice into imx_clk_pllv3*()   Marek Vasut
• [PATCH 18/24] clk: imx: pllv3: Resolve parent clock by name   Marek Vasut
• [PATCH 19/24] clk: clk-divider: Use struct udevice instead of struct device   Marek Vasut
• [PATCH 20/24] clk: imx: Pass struct udevice into imx_clk_divider*()   Marek Vasut
• [PATCH 21/24] clk: clk-divider: Resolve parent clock by name   Marek Vasut
• [PATCH 22/24] clk: clk-fixed-factor: Use struct udevice instead of struct device   Marek Vasut
• [PATCH 23/24] clk: clk-fixed-factor: Resolve parent clock by name   Marek Vasut
• [PATCH 24/24] clk: imx: Pass struct udevice into imx_clk_fixed_factor*()   Marek Vasut
• [PATCH 00/24] clk: Add clk_resolve_parent_clk() and fix up iMX clock drivers   Marek Vasut
• [PATCH] arm64: imx8mp: Gracefully handle disabled ENV_IS_IN_SPI_FLASH   Marek Vasut
• [PATCH] arm64: imx8mp: Gracefully handle disabled ENV_IS_IN_SPI_FLASH   Marek Vasut
• [PATCH 00/24] clk: Add clk_resolve_parent_clk() and fix up iMX clock drivers   Marek Vasut
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Marek Vasut
• [PATCH 1/4] cpu: imx8_cpu: Print Speed grade if IMX_THERMAL or IMX_TMU   Marek Vasut
• [PULL] u-boot-sh/next   Marek Vasut
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Marek Vasut
• Re: 回复: 回复: 回复: 回复: 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol support to SCMI agent   Marek Vasut
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Marek Vasut
• [PATCH] tiny-printf: Add support for upper case hex values   Marek Vasut
• [PATCH] cmd: env: select: Add output for available evironment targets   Marek Vasut
• [PATCH] tiny-printf: Add support for upper case hex values   Marek Vasut
• [PATCH V2 3/5] arm64: imx: imx8mm-beacon: Enable CPU_IMX   Marek Vasut
• [PATCH V2 3/5] arm64: imx: imx8mm-beacon: Enable CPU_IMX   Marek Vasut
• [PATCH V2] tiny-printf: Improve %X formatting   Marek Vasut
• [PATCH v1] MAINTAINERS: Add USB driver file to visionfive2 maintain files.   Marek Vasut
• [PATCH V2 3/5] arm64: imx: imx8mm-beacon: Enable CPU_IMX   Marek Vasut
• [PATCH V2] cmd: env: select: Add output for available evironment targets   Marek Vasut
• Re: 回复: [PATCH v7 10/19] imx9: scmi: add i.MX95 SoC and clock related code   Marek Vasut
• [PATCH v8 01/19] firmware: scmi: smt: Interrupt communication enable   Marek Vasut
• [PATCH v8 02/19] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Marek Vasut
• [PATCH] power: regulator: scmi: Move regulator subnode hack to scmi_regulator   Marek Vasut
• [PATCH v8 03/19] firmware: scmi_agent: add SCMI pin control protocol support   Marek Vasut
• [PATCH v8 04/19] scmi_protocols: add SCMI misc protocol protocol_id and message_id for getting the ROM passover data   Marek Vasut
• [PATCH v8 05/19] scmi_protocols: add SCMI Performance domain management protocol message IDs   Marek Vasut
• [PATCH v8 06/19] clk: scmi: add the command CLOCK_PARENT_SET   Marek Vasut
• [PATCH v8 07/19] clk: scmi: check the clock state/parent/rate control permissions   Marek Vasut
• [PATCH v8 09/19] scmi_protocols: update struct scmi_base_discover_list_protocols_out   Marek Vasut
• [PATCH v8 11/19] spl: imx: use trampoline buffer to load images to secure region   Marek Vasut
• [PATCH v8 13/19] imx: Kconfig: IMX8_ROMAPI is not configured for i.MX95   Marek Vasut
• [PATCH v8 00/19] imx: add i.MX95 support   Marek Vasut
• [PATCH 1/8] env: Rename OVERWRITE_ETHADDR_ONCE to ENV_OVERWRITE_ETHADDR_ONCE   Marek Vasut
• [PATCH 2/8] env: Rename SYS_REDUNDAND_ENVIRONMENT to ENV_REDUNDAND_ENVIRONMENT   Marek Vasut
• [PATCH 3/8] env: Rename SYS_RELOC_GD_ENV_ADDR to ENV_RELOC_GD_ENV_ADDR   Marek Vasut
• [PATCH 4/8] env: Rename SYS_MMC_ENV_DEV to ENV_SDMMC_DEVICE_INDEX   Marek Vasut
• [PATCH 5/8] env: Rename SYS_MMC_ENV_PART to ENV_SDMMC_EMMC_HW_PARTITION   Marek Vasut
• [PATCH 6/8] env: Rename ENV_MMC_PARTITION to ENV_SDMMC_SW_PARTITION   Marek Vasut
• [PATCH 7/8] env: Rename DEFAULT_ENV_FILE to ENV_DEFAULT_ENV_TEXT_FILE   Marek Vasut
• [PATCH 8/8] env: Drop DELAY_ENVIRONMENT   Marek Vasut
• [PATCH] usb: gadget: atmel: Add SAM9X60 support   Marek Vasut
• [PATCH V3 1/6] imx: imx9: Imply IMX_TMU   Marek Vasut
• [PATCH V3 2/6] imx: imx8m: Imply IMX_TMU   Marek Vasut
• [PATCH V3 3/6] cpu: imx8_cpu: Print Speed grade if IMX_THERMAL or IMX_TMU   Marek Vasut
• [PATCH V3 4/6] imx: imx8m: Imply CPU_IMX by default   Marek Vasut
• [PATCH V3 5/6] imx: imx8: Imply CPU_IMX by default   Marek Vasut
• [PATCH V3 6/6] imx: imx9: Imply CPU_IMX by default   Marek Vasut
• [PATCH V3 3/6] cpu: imx8_cpu: Print Speed grade if IMX_THERMAL or IMX_TMU   Marek Vasut
• [PATCH V3 5/6] imx: imx8: Imply CPU_IMX by default   Marek Vasut
• [PATCH v2 00/24] clk: Add clk_resolve_parent_clk() and fix up iMX clock drivers   Marek Vasut
• [PATCH v2 01/24] clk: Add clk_resolve_parent_clk()   Marek Vasut
• [PATCH v2 02/24] clk: clk-mux: Fold clk_register_mux()   Marek Vasut
• [PATCH v2 03/24] clk: clk-mux: Use struct udevice instead of struct device   Marek Vasut
• [PATCH v2 04/24] clk: clk-mux: Resolve parent clock by name   Marek Vasut
• [PATCH v2 05/24] clk: imx: Pass struct udevice into imx_clk_mux*()   Marek Vasut
• [PATCH v2 06/24] clk: imx: Pass struct udevice to clk_register_mux()   Marek Vasut
• [PATCH v2 07/24] clk: clk-gate: Use struct udevice instead of struct device   Marek Vasut
• [PATCH v2 08/24] clk: clk-gate: Resolve parent clock by name   Marek Vasut
• [PATCH v2 09/24] clk: imx: gate2: Use struct udevice instead of struct device   Marek Vasut
• [PATCH v2 10/24] clk: imx: gate2: Resolve parent clock by name   Marek Vasut
• [PATCH v2 11/24] clk: imx: Pass struct udevice into imx_clk_gate*()   Marek Vasut
• [PATCH v2 12/24] clk: imx: Pass struct udevice to clk_register_gate*()   Marek Vasut
• [PATCH v2 13/24] clk: clk-composite: Use struct udevice instead of struct device   Marek Vasut
• [PATCH v2 14/24] clk: clk-composite: Resolve parent clock by name   Marek Vasut
• [PATCH v2 15/24] clk: imx: Pass struct udevice into imx_clk_composite*()   Marek Vasut
• [PATCH v2 16/24] clk: imx: Convert clock-osc-* back to osc_*   Marek Vasut
• [PATCH v2 17/24] clk: imx: Pass struct udevice into imx_clk_pllv3*()   Marek Vasut
• [PATCH v2 18/24] clk: imx: pllv3: Resolve parent clock by name   Marek Vasut
• [PATCH v2 19/24] clk: clk-divider: Use struct udevice instead of struct device   Marek Vasut
• [PATCH v2 20/24] clk: imx: Pass struct udevice into imx_clk_divider*()   Marek Vasut
• [PATCH v2 21/24] clk: clk-divider: Resolve parent clock by name   Marek Vasut
• [PATCH v2 22/24] clk: clk-fixed-factor: Use struct udevice instead of struct device   Marek Vasut
• [PATCH v2 23/24] clk: clk-fixed-factor: Resolve parent clock by name   Marek Vasut
• [PATCH v2 24/24] clk: imx: Pass struct udevice into imx_clk_fixed_factor*()   Marek Vasut
• [PATCH v2 4/4] renesas_rzg2l_smarc_defconfig: Enable networking support   Marek Vasut
• [PATCH v2 2/4] net: ravb: Add optional reset deassertion   Marek Vasut
• [PATCH v2 3/4] net: ravb: Add RZ/G2L Support   Marek Vasut
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Marek Vasut
• usb:composite: data abort on second ums launch   Marek Vasut
• [PATCH v2] mmc: mmc_boot: support sandisk and micron emmc boot/rpmb partition resizing   Marek Vasut
• [PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool   Marek Vasut
• [PATCH] usb: dwc3: gadget: Fix excepts/expects typo   Marek Vasut
• [PATCH v2 2/4] net: ravb: Add optional reset deassertion   Marek Vasut
• [PATCH 2/8] env: Rename SYS_REDUNDAND_ENVIRONMENT to ENV_REDUNDAND_ENVIRONMENT   Marek Vasut
• [PATCH v2 3/4] net: ravb: Add RZ/G2L Support   Marek Vasut
• [PATCH v2 00/24] clk: Add clk_resolve_parent_clk() and fix up iMX clock drivers   Marek Vasut
• [PATCH V4 4/7] cpu: imx8_cpu: Print Speed grade if IMX_TMU.   Marek Vasut
• [PATCH V4 4/7] cpu: imx8_cpu: Print Speed grade if IMX_TMU.   Marek Vasut
• [PATCH v3] mmc: mmc_boot: Support Sandisk and Micron eMMC BOOT/RPMB hardware partition resizing   Marek Vasut
• [PATCH 1/5] ram: renesas: dbsc5: Clarify MR27/MR28/MR57 register operations   Marek Vasut
• [PATCH 2/5] ram: renesas: dbsc5: Drop space before dbsc5_ddr_setval_all_ch()   Marek Vasut
• [PATCH 3/5] ram: renesas: dbsc5: Improve dbsc5_send_dbcmd2() signature   Marek Vasut
• [PATCH 4/5] ram: renesas: dbsc5: Factor out dbsc5_wait_dbwait()   Marek Vasut
• [PATCH 5/5] ram: renesas: dbsc5: Pass udevice and MODEMR0 to dbsc5_get_board_data()   Marek Vasut
• [PATCH 4/8] env: Rename SYS_MMC_ENV_DEV to ENV_SDMMC_DEVICE_INDEX   Marek Vasut
• [PATCH v8 02/19] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Marek Vasut
• [PATCH 4/8] env: Rename SYS_MMC_ENV_DEV to ENV_SDMMC_DEVICE_INDEX   Marek Vasut
• [EXT] Re: [PATCH v3] mmc: mmc_boot: Support Sandisk and Micron eMMC BOOT/RPMB hardware partition resizing   Marek Vasut
• [PATCH v8 02/19] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Marek Vasut
• [PATCH v8 02/19] pinctrl: nxp: add a pin controller driver based on SCMI pin control protocol   Marek Vasut
• [PULL] u-boot-sh/next   Marek Vasut
• Re: 回复: [PATCH v8 07/19] clk: scmi: check the clock state/parent/rate control permissions   Marek Vasut
• [PATCH] binman: Fill in most of the imx8mimage and imx8mcst tests   Marek Vasut
• [PATCH] scripts/setlocalversion: Reinstate .scmversion support   Rasmus Villemoes
• [PATCH 0/8] membuff: Add tests and update to support a flag for empty/full   Rasmus Villemoes
• [PATCH] scripts/setlocalversion: Reinstate .scmversion support   Rasmus Villemoes
• [PATCH 0/8] membuff: Add tests and update to support a flag for empty/full   Rasmus Villemoes
• [PATCH 2/2] sunxi: H616: dram: Improve address wrapping detection   Ryan Walklin
• [PATCH 1/3] fastboot: lift restrictions on !NET_LWIP for USB   Michael Walle
• [PATCH 2/3] net: lwip: remove superfluous newline at tftp help text   Michael Walle
• [PATCH 3/3] env: mmc: fix offsets relative to the end of the partition   Michael Walle
• [PATCH 1/3] fastboot: lift restrictions on !NET_LWIP for USB   Michael Walle
• [PATCH 2/3] net: lwip: remove superfluous newline at tftp help text   Michael Walle
• [PATCH 3/3] env: mmc: fix offsets relative to the end of the partition   Michael Walle
• [PATCH 3/3] env: mmc: fix offsets relative to the end of the partition   Michael Walle
• [PATCH 1/3] fastboot: lift restrictions on !NET_LWIP for USB   Michael Walle
• [EXT] Re: [PATCH] mmc: mmc_boot: support sandisk and micron emmc boot/rpmb partition resizing   Luke Wang
• [EXT] Re: [PATCH v2] mmc: mmc_boot: support sandisk and micron emmc boot/rpmb partition resizing   Luke Wang
• [EXT] Re: [PATCH v3] mmc: mmc_boot: Support Sandisk and Micron eMMC BOOT/RPMB hardware partition resizing   Luke Wang
• [EXT] Re: [PATCH v3] mmc: mmc_boot: Support Sandisk and Micron eMMC BOOT/RPMB hardware partition resizing   Luke Wang
• [PATCH] disable mail for swarren   Stephen Warren
• [PATCH v7 06/19] clk: scmi: add the command CLOCK_PARENT_SET   Lothar Waßmann
• [PATCH v7 07/19] clk: scmi: check the clock state/parent/rate control permissions   Lothar Waßmann
• [PATCH v7 10/19] imx9: scmi: add i.MX95 SoC and clock related code   Lothar Waßmann
• [PATCH v7 15/19] tools: imx8image: add i.MX95 support   Lothar Waßmann
• [PATCH v7 18/19] imx95_evk: add i.MX95 19x19 EVK board basic support   Lothar Waßmann
• [PATCH] openpiton: riscv64: Drop unnecessary 'imply SPL_RISCV_MMODE'   Tianrui Wei
• Unexpected RPi5 Behavior with Saved U-Boot Environment   Richard Weinberger
• Unexpected RPi5 Behavior with Saved U-Boot Environment   Richard Weinberger
• [PATCH v2 06/11] video: rockchip: Add VOP2 support   Andy Yan
• Pull request: u-boot-rockchip-20250301   Kever Yang
• [PATCH 10/13] arm: dts: rockchip: Add rk3528-pinctrl.dtsi   Kever Yang
• [PATCH] armv8: start.S: Subordinate CPUs psci setup vector   Xu Zhang
• [PATCH 1/2] sunxi: h616: dram: Rework size detection   Icenowy Zheng
• [PATCH 0/4] Add k1 reset driver for bananapi-bpif3 platform.   Huan Zhou
• [PATCH 1/4] riscv: dt-binding: k1: Add reset driver binding definition.   Huan Zhou
• [PATCH 2/4] riscv: reset: k1: Add reset driver   Huan Zhou
• [PATCH 3/4] riscv: dts: k1: add reset controller node in device tree   Huan Zhou
• [PATCH 4/4] Add reset config options for k1   Huan Zhou
• [PATCH 2/4] riscv: reset: k1: Add reset driver   Huan Zhou
• [PATCH v2 0/4] Add k1 reset driver for bananapi-bpif3 platform.   Huan Zhou
• [PATCH v2 1/4] riscv: dt-binding: k1: Add reset driver binding definition.   Huan Zhou
• [PATCH v2 2/4] riscv: reset: k1: Add reset driver   Huan Zhou
• [PATCH v2 3/4] riscv: dts: k1: add reset controller node in device tree   Huan Zhou
• [PATCH v2 4/4] Add reset config options for k1   Huan Zhou
• [PATCH 0/2] riscv: pinctrl: k1: Add pinctrl support for bannanapi-f3   Huan Zhou
• [PATCH 1/2] riscv: dts: k1: add pinctrl property in dts.   Huan Zhou
• [PATCH 2/2] config: Enable pinctrl in bananapi-f3   Huan Zhou
• [PATCH 2/5] arm: include asm-generic/int-ll64.h in setjmp.h   Yao Zi
• [PATCH 2/5] arm: include asm-generic/int-ll64.h in setjmp.h   Yao Zi
• [PATCH 5/5] riscv: select OF_HAS_PRIOR_STAGE by default if SBI is enabled   Yao Zi
• [PATCH 5/5] riscv: select OF_HAS_PRIOR_STAGE by default if SBI is enabled   Yao Zi
• [GIT PULL] u-boot-riscv/master   Yao Zi
• [PATCH v2 0/4] Simplify retrieving FDT from SBI in S-Mode   Yao Zi
• [PATCH v2 1/4] riscv: lib: Add a default implementation of board_fdt_blob_setup   Yao Zi
• [PATCH v2 2/4] board: qemu: riscv: Remove duplicated board_fdt_blob_setup   Yao Zi
• [PATCH v2 3/4] board: starfive: Remove duplicated board_fdt_blob_setup   Yao Zi
• [PATCH v2 4/4] board: sifive: Remove dead board_fdt_blob_setup   Yao Zi
• [PATCH] riscv: dts: cv18xx: Drop unused dummy clocks   Yao Zi
• [PATCH] clk: sophgo: Fix return values of register updating helpers   Yao Zi
• Building separate SPL with U-boot   Yao Zi
• Problem with UART in U-Boot.   Yao Zi
• [RESEND PATCH 0/2] ARM: stm32: env: Enable scan and start for AB schema on STM32MP15 DHSOM   Pascal Zimmermann
• [RESEND PATCH 1/2] config_distro_bootcmd: make possible to substitute 'part list' in distro_bootcmd   Pascal Zimmermann
• [RESEND PATCH 2/2] ARM: stm32: env: Enable scan and start for AB schema on STM32MP15 DHSOM   Pascal Zimmermann
• [PATCH v1 0/2] Add HPS Notification for HPS boot stages   alif.zakuan.yuslaimi at altera.com
• [PATCH v1 1/2] arm: socfpga: mailbox: Notify SDM on HPS code execution stages   alif.zakuan.yuslaimi at altera.com
• [PATCH v1 2/2] arm: socfpga: spl: Notify SDM on FSBL execution   alif.zakuan.yuslaimi at altera.com
• [PATCH v1] configs: agilex5: Enable Marvell PHY driver   alif.zakuan.yuslaimi at altera.com
• [resend v2 00/13] Add Synopsys MIPI I3C Driver support   dinesh.maniyam at altera.com
• [resend v2 01/13] drivers: i3c: Add new i3c uclass id   dinesh.maniyam at altera.com
• [resend v2 02/13] drivers: i3c: Add driver for MIPI DWI3C   dinesh.maniyam at altera.com
• [resend v2 03/13] drivers: i3c: Add i3c uclass driver.   dinesh.maniyam at altera.com
• [resend v2 04/13] drivers: Enabled Kconfig and Makefile for i3c support   dinesh.maniyam at altera.com
• [resend v2 05/13] drivers: i3c: Enabled Kconfig and Makefile for DWI3C   dinesh.maniyam at altera.com
• [resend v2 06/13] drivers: i3c: Add i3c sandbox simple test.   dinesh.maniyam at altera.com
• [resend v2 07/13] drivers: i3c: master: Enable probe i3c without slave device   dinesh.maniyam at altera.com
• [resend v2 08/13] i3c: master: dw-i3c-master: Fix OD_TIMING for spike filter   dinesh.maniyam at altera.com
• [resend v2 09/13] cmd: Add i3c command support.   dinesh.maniyam at altera.com
• [resend v2 10/13] cmd: Enabled Kconfig and Makefile for DWI3C cmd support   dinesh.maniyam at altera.com
• [resend v2 11/13] test: cmd: Add simple test for i3c   dinesh.maniyam at altera.com
• [resend v2 12/13] configs: sandbox_defconfig: Enable configs for sandbox i3c   dinesh.maniyam at altera.com
• [resend v2 13/13] configs: agilex5_defconfig: Enable i3c configs for agilex5   dinesh.maniyam at altera.com
• [resend v3 00/12] Add Synopsys MIPI I3C Driver support   dinesh.maniyam at altera.com
• [resend v3 01/12] drivers: i3c: Add new i3c uclass id   dinesh.maniyam at altera.com
• [resend v3 02/12] drivers: i3c: Add driver for MIPI DWI3C   dinesh.maniyam at altera.com
• [resend v3 03/12] drivers: i3c: Add i3c uclass driver.   dinesh.maniyam at altera.com
• [resend v3 04/12] drivers: Enabled Kconfig and Makefile for i3c support   dinesh.maniyam at altera.com
• [resend v3 05/12] drivers: i3c: Enabled Kconfig and Makefile for DWI3C   dinesh.maniyam at altera.com
• [resend v3 06/12] drivers: i3c: Add i3c sandbox simple test.   dinesh.maniyam at altera.com
• [resend v3 07/12] drivers: i3c: master: Enable probe i3c without slave device   dinesh.maniyam at altera.com
• [resend v3 08/12] i3c: master: dw-i3c-master: Fix OD_TIMING for spike filter   dinesh.maniyam at altera.com
• [resend v3 09/12] cmd: Add i3c command support.   dinesh.maniyam at altera.com
• [resend v3 10/12] test: cmd: Add simple test for i3c   dinesh.maniyam at altera.com
• [resend v3 11/12] configs: sandbox_defconfig: Enable configs for sandbox i3c   dinesh.maniyam at altera.com
• [resend v3 12/12] configs: agilex5_defconfig: Enable i3c configs for agilex5   dinesh.maniyam at altera.com
• [PATCH v1 0/2] Add FPGA configuration when booting Linux   muhammad.hazim.izzat.zamri at altera.com
• [PATCH v1 1/2] drivers: fpga: Add FPGA configuration during bootm for Intel SOCFPGA   muhammad.hazim.izzat.zamri at altera.com
• [PATCH v1 2/2] drivers: fpga: Follow mainline to pass compatible flags to fpga_load   muhammad.hazim.izzat.zamri at altera.com
• [PATCH v1 0/2] Add FPGA configuration when booting Linux   muhammad.hazim.izzat.zamri at altera.com
• [PATCH v1 1/2] drivers: fpga: Add FPGA configuration during bootm for Intel SOCFPGA   muhammad.hazim.izzat.zamri at altera.com
• [PATCH v1 2/2] drivers: fpga: Follow mainline to pass compatible flags to fpga_load   muhammad.hazim.izzat.zamri at altera.com
• [PATCH v1 0/2] Add FPGA configuration when booting Linux   muhammad.hazim.izzat.zamri at altera.com
• [PATCH v1 1/2] drivers: fpga: Add FPGA configuration during bootm for Intel SOCFPGA   muhammad.hazim.izzat.zamri at altera.com
• [PATCH v1 2/2] drivers: fpga: Follow mainline to pass compatible flags to fpga_load   muhammad.hazim.izzat.zamri at altera.com
• [PATCH] toradex: apalis-imx6: Fix build failure when CONFIG_VIDEO_IPUV3 is enabled   rafael at beims.me
• [PATCH] board: rockchip: Add LCKFB TaishanPi RK3566 Board   jiehui.he at foxmail.com
• [PATCH v1 0/1] USB xHCI wrong act_len calculation in case of using multipe TRB   bigunclemax at gmail.com
• [PATCH v1 1/1] usb: xhci: fix calculation of act_len in case of using multipe TRB   bigunclemax at gmail.com
• [PATCH v2 0/2] Support Apalis/Colibri imx6 v1.2   ernestvanhoecke at gmail.com
• [PATCH v2 1/2] board: toradex: apalis/colibri imx6: Detect new v1.2 SoM variant   ernestvanhoecke at gmail.com
• [PATCH v2 2/2] toradex: apalis/colibri imx6: Select correct DTB for SoM v1.2+   ernestvanhoecke at gmail.com
• [RESEND PATCH 0/2] Add support for Infineon S28HL256T and S28HL02GT   tkuw584924 at gmail.com
• [RESEND PATCH 1/2] mtd: spi-nor-ids: Add support for S28HL256T   tkuw584924 at gmail.com
• [RESEND PATCH 2/2] mtd: spi-nor-ids: Add support for S28HL02GT   tkuw584924 at gmail.com
• [PATCH 0/2] zynqmp parallel memories support for Infineon Flash   tkuw584924 at gmail.com
• [PATCH 1/2] spi: zynqmp_gqspi: Make WR_ANY_REG opcode not use striped access   tkuw584924 at gmail.com
• [PATCH 2/2] mtd: spi-nor-core: Rework spansion_sr_ready() for parallel memories support   tkuw584924 at gmail.com
• [RFC PATCH] UFS: Remove the timeout while send command   neil.armstrong at linaro.org
• [PATCH 2/3] misc: introduce Qcom GENI wrapper   neil.armstrong at linaro.org
• [PATCH 3/3] scsi: sync cache on write   neil.armstrong at linaro.org
• [PATCH v2] net: dhcp6: Send DHCPv6 using multicast MAC   seanedmond at linux.microsoft.com
• [PATCH v2 1/8] dt-bindings: clk: define additional PMC clocks   Manikandan.M at microchip.com
• [PATCH v3 1/8] dt-bindings: clock: rename at91.h to at91-pmc-status.h   Manikandan.M at microchip.com
• [PATCH v3 1/8] dt-bindings: clock: rename at91.h to at91-pmc-status.h   Manikandan.M at microchip.com
• [PATCH v5 6/8] ARM: dts: at91: sam9x75_curiosity: add tweaks for sam9x75 curiosity board   Manikandan.M at microchip.com
• help   vijays at nubroad.com
• [PATCH] mmc: mmc_boot: support sandisk and micron emmc boot/rpmb partition resizing   ziniu.wang_1 at nxp.com
• [PATCH v2] mmc: mmc_boot: support sandisk and micron emmc boot/rpmb partition resizing   ziniu.wang_1 at nxp.com
• [PATCH v3] mmc: mmc_boot: Support Sandisk and Micron eMMC BOOT/RPMB hardware partition resizing   ziniu.wang_1 at nxp.com
• Rpi5 usb boot support   ludovic wittlin
• [PATCH 01/34] sunxi: clock: H6: drop usage of struct sunxi_ccm_reg   Jernej Škrabec
• [PATCH 02/34] sunxi: mmc: remove usage of struct sunxi_ccm_reg   Jernej Škrabec
• [PATCH 13/34] sunxi: spl: add support for Allwinner A523 watchdog   Jernej Škrabec
• [PATCH 16/34] clk: sunxi: Add support for the A523 -R CCU   Jernej Škrabec
• [PATCH 22/34] sunxi: Kconfig: consolidate SYS_CLK_FREQ selection   Jernej Škrabec
• [PATCH 23/34] spl: reorder SPL_MAX_SIZE defaults for sunxi   Jernej Škrabec
• [PATCH 24/34] sunxi: armv8: fel: move fel_stash variable to the front   Jernej Škrabec
• [PATCH 25/34] sunxi: arm64: boot0.h: move fel_stash_addr variable to the front   Jernej Škrabec
• [PATCH 26/34] sunxi: update rmr_switch.S source code   Jernej Škrabec
• [PATCH 27/34] sunxi: armv8: FEL: save and restore GICv3 registers   Jernej Škrabec
• [PATCH 28/34] sunxi: armv8: FEL: save and restore SP_IRQ   Jernej Škrabec
• [PATCH 29/34] sunxi: sun50i_h6: add A523 SPL clock setup code   Jernej Škrabec
• [PATCH 30/34] sunxi: A523: add DRAM initialisation routine   Jernej Škrabec
• FIXUP! sunxi: mmc: Improve reset procedure   Jernej Škrabec
• [PATCH] sunxi: h616: defconfigs: enable eMMC   Jernej Škrabec
• efidebug: defaults prints incorrect hardcoded path to executable   Filip Žaludek
• [PATCH v1 1/3] riscv: image: Add new image type for RV64   Максим Москалец
• [U-Boot] [PATCH 13/15] x86: Increase the size of the phys_size_t and phys_addr_t types   عاصم الاسطورة
• [PATCH] bootm: Add support for passing arguments to elf app   牛 志宏