[PATCH] usb: dwc3: gadget: Fix match_ep callback for NXP UUU tool

[Francesco Dolcini]

On Mon, Mar 24, 2025 at 02:53:23PM +0100, Marek Vasut wrote:
> On 3/24/25 1:30 PM, Francesco Dolcini wrote:
> > On Mon, Mar 24, 2025 at 09:26:03AM +0100, Mattijs Korpershoek wrote:
> > > Hi Francesco,
> > > 
> > > On lun., mars 24, 2025 at 09:03, Francesco Dolcini <francesco at dolcini.it> wrote:
> > > 
> > > > Hello Mattijs, Marek
> > > > 
> > > > On Thu, Mar 20, 2025 at 10:47:02AM +0100, Mattijs Korpershoek wrote:
> > > > > On mer., mars 19, 2025 at 23:07, Marek Vasut <marex at denx.de> wrote:
> > > > > 
> > > > > > The UUU tool excepts the interrupt-in endpoint to be ep1in, otherwise
> > > > > > it crashes. This is a result of the previous hard-coded EP setup in
> > > > > > drivers/usb/gadget/epautoconf.c which did special-case EP allocation
> > > > > > for SPL builds, and which was since converted to this callback, but
> > > > > > without the special-case EP allocation in SPL part.
> > > > > > 
> > > > > > This reinstates the SPL part in an isolated manner, only for NXP iMX
> > > > > > SoCs, only for SPL builds, and only for the ep1in interrupt-in endpoint.
> > > > 
> > > > UUU can (and in our case is) used also on non-NXP i.MX platforms.
> > > > What should we do?
> > > 
> > > Do reproduce the problem (UUU tool crashes) on those platforms with
> > > recent U-Boot versions (v2024.10+) ?
> > 
> > Not tested, my comment is purely based on the code and the commit message.
> > Older U-Boot versions (up to v2024.04, included) are working fine, with UUU used
> > with TI K3 SoCs (AM69, AM62, AM62P).
> Are you talking about the NXP UUU ?

yes, it works just fine on not-NXP SoC.

Francesco