[PATCH 3/8] configs: phycore_am62x_a53_defconfig: Update for ethernet boot
Wadim Egorov
w.egorov at phytec.de
Tue Mar 25 04:58:19 CET 2025
Add support for ethernet boot in the A53 SPL. Increase the SPL Size
limit and update SPL_STACK_R_ADDR.
Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
---
configs/phycore_am62x_a53_defconfig | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/configs/phycore_am62x_a53_defconfig b/configs/phycore_am62x_a53_defconfig
index 0494fc408b7..0111ad12e20 100644
--- a/configs/phycore_am62x_a53_defconfig
+++ b/configs/phycore_am62x_a53_defconfig
@@ -19,14 +19,15 @@ CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_DM_RESET=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK_R_ADDR=0x83000000
CONFIG_SPL_TEXT_BASE=0x80080000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x80c80000
CONFIG_SPL_BSS_MAX_SIZE=0x80000
CONFIG_SPL_STACK_R=y
CONFIG_SYS_BOOTM_LEN=0x800000
-CONFIG_SPL_SIZE_LIMIT=0x40000
+CONFIG_SPL_SIZE_LIMIT=0x80000
CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x800
CONFIG_ENV_OFFSET_REDUND=0x6c0000
CONFIG_SPL_FS_FAT=y
@@ -51,11 +52,15 @@ CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
+CONFIG_SPL_DMA=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_ETH=y
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_NET=y
+CONFIG_SPL_NET_VCI_STRING="AM62X U-Boot A53 SPL"
CONFIG_SPL_POWER_DOMAIN=y
CONFIG_SPL_RAM_DEVICE=y
# CONFIG_SPL_SPI_FLASH_TINY is not set
--
2.34.1
More information about the U-Boot
mailing list