[PATCH 2/8] configs: Add phycore_am62x_r5_ethboot_defconfig

[Wadim Egorov]

Provide a defconfig for booting the phycore-am62x via Ethernet.
We need a separate defconfig because the AM62x has not enough internal
SRAM to support all boot sources.

Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
---
 board/phytec/phycore_am62x/MAINTAINERS     |  1 +
 configs/phycore_am62x_r5_ethboot_defconfig | 43 ++++++++++++++++++++++
 2 files changed, 44 insertions(+)
 create mode 100644 configs/phycore_am62x_r5_ethboot_defconfig

diff --git a/board/phytec/phycore_am62x/MAINTAINERS b/board/phytec/phycore_am62x/MAINTAINERS
index 670c7473481..106b4b80121 100644
--- a/board/phytec/phycore_am62x/MAINTAINERS
+++ b/board/phytec/phycore_am62x/MAINTAINERS
@@ -9,6 +9,7 @@ F:	arch/arm/dts/k3-am625-r5-phycore-som-2gb.dts
 F:	board/phytec/phycore_am62x/
 F:	configs/phycore_am62x_a53_defconfig
 F:	configs/phycore_am62x_r5_defconfig
+F:	configs/phycore_am62x_r5_ethboot_defconfig
 F:	configs/phycore_am62x_r5_usbdfu_defconfig
 F:	include/configs/phycore_am62x.h
 F:	doc/board/phytec/phycore-am62x.rst
diff --git a/configs/phycore_am62x_r5_ethboot_defconfig b/configs/phycore_am62x_r5_ethboot_defconfig
new file mode 100644
index 00000000000..3bc426821e9
--- /dev/null
+++ b/configs/phycore_am62x_r5_ethboot_defconfig
@@ -0,0 +1,43 @@
+#include <configs/phycore_am62x_r5_defconfig>
+
+CONFIG_ARM=y
+CONFIG_ARCH_K3=y
+CONFIG_SOC_K3_AM625=y
+CONFIG_TARGET_PHYCORE_AM62X_R5=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-am625-r5-phycore-som-2gb"
+
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x200000
+CONFIG_SPL_DMA=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_ETH=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_NET=y
+CONFIG_SPL_NET_VCI_STRING="AM62X U-Boot R5 SPL"
+CONFIG_SPL_SYSCON=y
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_OMAP24XX=y
+CONFIG_PHY_TI_DP83867=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_TI_AM65_CPSW_NUSS=y
+CONFIG_SPL_MMC=n
+CONFIG_SPL_DM_SPI=n
+CONFIG_SPL_MMC=n
+CONFIG_SPL_SPI_FLASH_SUPPORT=n
+CONFIG_SPL_SPI=n
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=n
+CONFIG_SPL_SPI_LOAD=n
+CONFIG_SPL_YMODEM_SUPPORT=n
+CONFIG_DM_SPI_FLASH=n
+CONFIG_SPI_FLASH_SFDP_SUPPORT=n
+CONFIG_SPI_FLASH_SOFT_RESET=n
+CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=n
+CONFIG_SPI_FLASH_STMICRO=n
+CONFIG_SPI_FLASH_MT35XU=n
+CONFIG_SPI=n
+CONFIG_DM_SPI=n
+CONFIG_CADENCE_QSPI=n
+CONFIG_SPL_DM_SPI=n
-- 
2.34.1