Please pull u-boot-tegra staging

[Svyatoslav Ryhel]

Dear Tom,

The following changes since commit dc0ee458f1afae4cb5c8a7b2c875bb24ffdf71ca:

  Prepare v2025.04-rc3 (2025-02-24 16:53:59 -0600)

are available in the Git repository at:

  https://source.denx.de/u-boot/custodians/u-boot-tegra.git staging

for you to fetch changes up to b156a1171e356f16aac88322b3bdcec071543c6c:

  configs: qc750: add 3 second delay before power off (2025-03-11 19:47:07 +0200)

----------------------------------------------------------------
Jonas Schwöbel (2):
      common: edid: update timing selection logic
      ARM: tegra: clock: fix PLLD/PLLD2 related clock calculations

Svyatoslav Ryhel (26):
      video: tegra20: dc: switch to newer clk API
      video: tegra20: dc: remove hardcoded Tegra 2 specific parts
      video: tegra20: dc: remove excessive headers
      video: tegra20: dc: improve code quality
      video: tegra20: dsi: check for panels among child nodes
      video: tegra20: dsi: switch to newer clk API
      video: tegra20: dsi: align ganged mode implementation
      video: tegra20: dsi: make SOL delay calculation mode independent
      video: tegra20: dsi: calculate packet parameters for video mode
      video: tegra20: dsi: calculate lanes for ganged mode
      video: tegra20: dsi: pass source on DSI configuration
      ARM: tegra: endeavoru: adjust panel node
      pinctrl: tegra: add Tegra K1 support
      video: tegra20: dc: dsi: add Tegra K1 compatible
      video: tegra20: mipi: add Tegra K1 support
      video: add TI LP855x backlight driver
      video: panel: add Sharp LQ079L1SX01 MIPI DSI panel driver
      ARM: tegra124: implement BCT patching
      board: xiaomi: mocha: add Xiaomi Mi Pad A0101 support
      ARM: tegra20: mark second DC with bootph-all
      configs: transformer: add 3 second delay before power off
      configs: endeavoru: add 3 second delay before power off
      configs: grouper: add 3 second delay before power off
      configs: picasso: add 3 second delay before power off
      configs: x3_t30: add 3 second delay before power off
      configs: qc750: add 3 second delay before power off

 arch/arm/dts/Makefile                            |   1 +
 arch/arm/dts/tegra124-xiaomi-mocha.dts           | 592 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/tegra20-u-boot.dtsi                 |   4 +
 arch/arm/dts/tegra30-htc-endeavoru.dts           |  23 ++-
 arch/arm/include/asm/arch-tegra124/pinmux.h      |   4 +
 arch/arm/include/asm/arch-tegra20/clock-tables.h |   2 +
 arch/arm/mach-tegra/Kconfig                      |   2 +-
 arch/arm/mach-tegra/clock.c                      |  30 +++-
 arch/arm/mach-tegra/tegra124/Kconfig             |   5 +
 arch/arm/mach-tegra/tegra124/Makefile            |   1 +
 arch/arm/mach-tegra/tegra124/bct.c               |  91 ++++++++++
 arch/arm/mach-tegra/tegra124/bct.h               |  55 ++++++
 board/xiaomi/mocha/Kconfig                       |  12 ++
 board/xiaomi/mocha/MAINTAINERS                   |   8 +
 board/xiaomi/mocha/Makefile                      |   9 +
 board/xiaomi/mocha/mocha-spl.c                   |  49 +++++
 board/xiaomi/mocha/mocha.c                       |  41 +++++
 board/xiaomi/mocha/mocha.env                     |  23 +++
 common/edid.c                                    | 308 ++++++++++++++++++++++++++++----
 configs/endeavoru_defconfig                      |   2 +-
 configs/grouper_defconfig                        |   2 +-
 configs/mocha_defconfig                          |  91 ++++++++++
 configs/picasso_defconfig                        |   2 +-
 configs/qc750_defconfig                          |   2 +-
 configs/transformer_t20_defconfig                |   2 +-
 configs/transformer_t30_defconfig                |   2 +-
 configs/x3_t30_defconfig                         |   2 +-
 doc/board/index.rst                              |   1 +
 doc/board/xiaomi/index.rst                       |   9 +
 doc/board/xiaomi/mocha.rst                       | 112 ++++++++++++
 drivers/pinctrl/tegra/pinctrl-tegra.c            |  56 ++++++
 drivers/video/Kconfig                            |  19 ++
 drivers/video/Makefile                           |   2 +
 drivers/video/lp855x_backlight.c                 | 302 +++++++++++++++++++++++++++++++
 drivers/video/sharp-lq079l1sx01.c                | 288 ++++++++++++++++++++++++++++++
 drivers/video/tegra20/tegra-dc.c                 | 107 ++++++-----
 drivers/video/tegra20/tegra-dsi.c                | 231 +++++++++++++++++-------
 drivers/video/tegra20/tegra-mipi.c               | 134 ++++++++++++--
 include/configs/mocha.h                          |  25 +++
 39 files changed, 2459 insertions(+), 192 deletions(-)
 create mode 100644 arch/arm/dts/tegra124-xiaomi-mocha.dts
 create mode 100644 arch/arm/mach-tegra/tegra124/bct.c
 create mode 100644 arch/arm/mach-tegra/tegra124/bct.h
 create mode 100644 board/xiaomi/mocha/Kconfig
 create mode 100644 board/xiaomi/mocha/MAINTAINERS
 create mode 100644 board/xiaomi/mocha/Makefile
 create mode 100644 board/xiaomi/mocha/mocha-spl.c
 create mode 100644 board/xiaomi/mocha/mocha.c
 create mode 100644 board/xiaomi/mocha/mocha.env
 create mode 100644 configs/mocha_defconfig
 create mode 100644 doc/board/xiaomi/index.rst
 create mode 100644 doc/board/xiaomi/mocha.rst
 create mode 100644 drivers/video/lp855x_backlight.c
 create mode 100644 drivers/video/sharp-lq079l1sx01.c
 create mode 100644 include/configs/mocha.h

Branch contains various upgrades and alignments for Tegra DC and DSI, including
full support of DSI dual mode for command and video mode panels, adjustments for
tegra video drivers to work with Tegra K1, adding support for Xiaomi Mi Pad TK1
based tablet (with adding required panel and backlight drivers), PLLD/D2 clock
calculation improvements, EDID selection adjustments and minor user experience
improvements of existing Tegra devices.

Thanks,
Svyatoslav Ryhel.