[PATCH v4 08/10] rockchip: binman: Use the skip-at-start prop in simple-bin image

[Jonas Karlman]

From: Simon Glass <sjg at chromium.org>

The simple-bin image is normally written to MMC media at block 64, which
is a 32K offset from start of storage media.

Set the skip-at-start property to 0x8000 (32 KiB) so that fdtmap and
other embedded binman symbols in the output binary is referencing image
offsets correctly.

Signed-off-by: Simon Glass <sjg at chromium.org>
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
Changes in v4:
- Drop defconfig changes
- Split from "VBE serial part H: Implement VBE on Rockchip RK3399"

Changes in v2:
- Move this patch to the end of the series
- Drop 0x8000 offset for SPI
---
 arch/arm/dts/rockchip-u-boot.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi
index fb38b7b80c43..65b81bf58626 100644
--- a/arch/arm/dts/rockchip-u-boot.dtsi
+++ b/arch/arm/dts/rockchip-u-boot.dtsi
@@ -154,6 +154,7 @@
 	simple-bin {
 		filename = "u-boot-rockchip.bin";
 		pad-byte = <0xff>;
+		skip-at-start = <0x8000>;
 
 		mkimage {
 			filename = "idbloader.img";
@@ -178,7 +179,7 @@
 #else
 		u-boot-img {
 #endif
-			offset = <CONFIG_SPL_PAD_TO>;
+			offset = <(CONFIG_SPL_PAD_TO + 0x8000)>;
 		};
 
 		fdtmap {
-- 
2.49.0