[PATCH 03/13] configs: phycore_am62ax_a53_defconfig: Enable capsule update

[Wadim Egorov]

Enable raw & on disk capsule updates and provide configs required
for updating MTD devices. Also resync after savedefconfig.

Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
---
 configs/phycore_am62ax_a53_defconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/configs/phycore_am62ax_a53_defconfig b/configs/phycore_am62ax_a53_defconfig
index 421dd851506..f8692f0b3b9 100644
--- a/configs/phycore_am62ax_a53_defconfig
+++ b/configs/phycore_am62ax_a53_defconfig
@@ -35,6 +35,9 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_EFI_SET_TIME=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
 CONFIG_BOOTSTD_FULL=y
@@ -62,15 +65,20 @@ CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
 CONFIG_SPL_YMODEM_SUPPORT=y
+# CONFIG_CMD_BOOTEFI_HELLO is not set
+CONFIG_CMD_BOOTEFI_SELFTEST=y
+CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_MTD=y
+# CONFIG_CMD_POWEROFF is not set
 CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_EFIDEBUG=y
 CONFIG_CMD_RTC=y
 CONFIG_CMD_SMC=y
 CONFIG_OF_CONTROL=y
@@ -96,6 +104,7 @@ CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_TI_SCI=y
 CONFIG_DFU_MMC=y
+CONFIG_DFU_MTD=y
 CONFIG_DFU_RAM=y
 CONFIG_DFU_SF=y
 CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
@@ -119,6 +128,7 @@ CONFIG_MMC_SDHCI_ADMA=y
 CONFIG_SPL_MMC_SDHCI_ADMA=y
 CONFIG_MMC_SDHCI_AM654=y
 CONFIG_MTD=y
+CONFIG_DM_MTD=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 # CONFIG_SPI_FLASH_SMART_HWCAPS is not set
@@ -178,3 +188,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0451
 CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
 CONFIG_SPL_DFU=y
 CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
+# CONFIG_HEXDUMP is not set
-- 
2.34.1