[PATCH 00/34] sunxi: clock refactoring and Allwinner A523 support
Andre Przywara
andre.przywara at arm.com
Sun Mar 23 12:35:10 CET 2025
This series introduces support for the Allwinner A523 SoC family. The
same die is used in different packages: the A523, A527, T527, and H728:
they connect a different set of peripherals to the pins, or enable extra
goodies like an NPU. From a U-Boot perspective those chips do not differ
much, all the differences are described in the board DT files.
These patches are not the most refined at the moment, but I hope that
people start reviewing them, so we can merge the ones that are ready,
to reduce their number.
To be able to share the SPL clock code, the existing H6 code gets
refactored in patches 01-13. This removes the C struct describing the
127 clock registers, and replaces it with macros defining the register
offsets. For more rationale and explanation see the 01/34 commit message.
Patches 14-20 extend the existing Allwinner U-Boot drivers to cope with
some of the changed peripherals, this includes the mandatory clock and
pinctrl drivers, but also some clock tweaks for the MMC controller
driver, and support for the new watchdog and the AXP323 used.
Patches 21-23 update some SPL bits to be able to cope with the A523.
Patches 24-28 extend the FEL handling code: the A523 has a GICv3, which
requires saving some GICv3 system registers, plus the IRQ mode stack
pointer. Patches 25-27 refactor the CPU clock code, and add the new
clock bits required by the A523.
Patch 29-32 add the new SPL bits for the A523, most prominently the DRAM
initialisation code. Many thanks to Jernej and Mikhail for providing
this part, there is a great reverse engineering and testing effort behind
this.
Patch 33 copies the DT files from the proposed Linux patches. They have
not been merged yet, mostly due to one missing DT binding dependency in
the linux-next tree, but have otherwise been agreed upon, with almost
every used binding being already merged. Eventually we will use the copy
from the DT rebasing repo, but for now those files must do.
The final patch adds defconfig files for the three boards that seem to be
the most popular at the moment, they include two development boards and
one TV box. The most interesting bits in there are the DRAM parameters.
Please have a look, review, and test.
Thanks!
Andre
Andre Przywara (30):
sunxi: clock: H6: drop usage of struct sunxi_ccm_reg
sunxi: mmc: remove usage of struct sunxi_ccm_reg
sunxi: H616: dram: remove usage of struct sunxi_ccm_reg
sunxi: H6: dram: remove usage of struct sunxi_ccm_reg
sunxi: clock: H6: remove struct sunxi_ccm_reg
sunxi: clock: H6: drop usage of struct sunxi_prcm_reg
sunxi: H6/H616: dram: remove usage of struct sunxi_prcm_reg
sunxi: clock: H6: remove struct sunxi_prcm_reg
sunxi: clock: H6: unify PLL control bit definitions
sunxi: clock: H6: factor out clock_set_pll()
sunxi: clock: H6: factor out H6/H616 CPU clock setup
sunxi: clock: H6: add A523 CPU PLL support
dt-bindings: add Allwinner A523 CCU bindings
clk: sunxi: Add support for the A523 CCU
clk: sunxi: Add support for the A523 -R CCU
pinctrl: sunxi: add Allwinner A523 pinctrl description
sunxi: mmc: add support for Allwinner A523 MMC mod clock
watchdog: sunxi: add A523 support
power: regulator: add AXP323 support
sunxi: update cpu_sunxi_ncat2.h
sunxi: Kconfig: consolidate SYS_CLK_FREQ selection
spl: reorder SPL_MAX_SIZE defaults for sunxi
sunxi: armv8: fel: move fel_stash variable to the front
sunxi: arm64: boot0.h: move fel_stash_addr variable to the front
sunxi: update rmr_switch.S source code
sunxi: armv8: FEL: save and restore GICv3 registers
sunxi: armv8: FEL: save and restore SP_IRQ
sunxi: add basic A523 support
sunxi: A523: add DT files from Linux v3 branch
sunxi: A523: add defconfigs for three boards
Jernej Skrabec (3):
sunxi: spl: add support for Allwinner A523 watchdog
sunxi: sun50i_h6: add A523 SPL clock setup code
sunxi: A523: add DRAM initialisation routine
Mikhail Kalashnikov (1):
sunxi: A523: add DDR3 DRAM support
arch/arm/cpu/armv8/fel_utils.S | 20 +-
arch/arm/dts/sun55i-a523.dtsi | 598 +++++++
arch/arm/dts/sun55i-a527-radxa-a5e.dts | 299 ++++
arch/arm/dts/sun55i-h728-x96qpro+.dts | 287 +++
arch/arm/dts/sun55i-t527-avaota-a1.dts | 308 ++++
arch/arm/include/asm/arch-sunxi/boot0.h | 20 +-
arch/arm/include/asm/arch-sunxi/clock_sun4i.h | 6 +
.../include/asm/arch-sunxi/clock_sun50i_h6.h | 280 +--
arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 7 +
.../include/asm/arch-sunxi/clock_sun8i_a83t.h | 7 +
arch/arm/include/asm/arch-sunxi/clock_sun9i.h | 7 +
.../include/asm/arch-sunxi/cpu_sunxi_ncat2.h | 20 +
arch/arm/include/asm/arch-sunxi/dram.h | 2 +
.../include/asm/arch-sunxi/dram_sun55i_a523.h | 183 ++
arch/arm/include/asm/arch-sunxi/prcm_sun50i.h | 44 +-
arch/arm/include/asm/arch-sunxi/watchdog.h | 12 +
arch/arm/mach-sunxi/Kconfig | 69 +-
arch/arm/mach-sunxi/Makefile | 2 +
arch/arm/mach-sunxi/board.c | 14 +
arch/arm/mach-sunxi/clock_sun50i_h6.c | 203 ++-
arch/arm/mach-sunxi/cpu_info.c | 2 +
arch/arm/mach-sunxi/dram_sun50i_h6.c | 41 +-
arch/arm/mach-sunxi/dram_sun50i_h616.c | 41 +-
arch/arm/mach-sunxi/dram_sun55i_a523.c | 1592 +++++++++++++++++
arch/arm/mach-sunxi/dram_timings/Makefile | 2 +
arch/arm/mach-sunxi/dram_timings/a523_ddr3.c | 135 ++
.../arm/mach-sunxi/dram_timings/a523_lpddr4.c | 119 ++
arch/arm/mach-sunxi/rmr_switch.S | 52 +-
board/sunxi/board.c | 6 +-
common/spl/Kconfig | 7 +-
configs/avaota-a1_defconfig | 31 +
configs/radxa-a5e_defconfig | 30 +
configs/x96q_pro_plus_defconfig | 33 +
drivers/clk/sunxi/Kconfig | 14 +
drivers/clk/sunxi/Makefile | 2 +
drivers/clk/sunxi/clk_a523.c | 85 +
drivers/clk/sunxi/clk_a523_r.c | 44 +
drivers/clk/sunxi/clk_sunxi.c | 10 +
drivers/mmc/sunxi_mmc.c | 36 +-
drivers/pinctrl/sunxi/Kconfig | 10 +
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 49 +
drivers/power/pmic/axp.c | 1 +
drivers/power/regulator/axp_regulator.c | 1 +
drivers/watchdog/sunxi_wdt.c | 11 +
include/axp_pmic.h | 1 +
include/configs/sun55i.h | 11 +
include/dt-bindings/clock/sun55i-a523-ccu.h | 189 ++
include/dt-bindings/clock/sun55i-a523-r-ccu.h | 37 +
include/dt-bindings/reset/sun55i-a523-ccu.h | 88 +
include/dt-bindings/reset/sun55i-a523-r-ccu.h | 25 +
50 files changed, 4685 insertions(+), 408 deletions(-)
create mode 100644 arch/arm/dts/sun55i-a523.dtsi
create mode 100644 arch/arm/dts/sun55i-a527-radxa-a5e.dts
create mode 100644 arch/arm/dts/sun55i-h728-x96qpro+.dts
create mode 100644 arch/arm/dts/sun55i-t527-avaota-a1.dts
create mode 100644 arch/arm/include/asm/arch-sunxi/dram_sun55i_a523.h
create mode 100644 arch/arm/mach-sunxi/dram_sun55i_a523.c
create mode 100644 arch/arm/mach-sunxi/dram_timings/a523_ddr3.c
create mode 100644 arch/arm/mach-sunxi/dram_timings/a523_lpddr4.c
create mode 100644 configs/avaota-a1_defconfig
create mode 100644 configs/radxa-a5e_defconfig
create mode 100644 configs/x96q_pro_plus_defconfig
create mode 100644 drivers/clk/sunxi/clk_a523.c
create mode 100644 drivers/clk/sunxi/clk_a523_r.c
create mode 100644 include/configs/sun55i.h
create mode 100644 include/dt-bindings/clock/sun55i-a523-ccu.h
create mode 100644 include/dt-bindings/clock/sun55i-a523-r-ccu.h
create mode 100644 include/dt-bindings/reset/sun55i-a523-ccu.h
create mode 100644 include/dt-bindings/reset/sun55i-a523-r-ccu.h
--
2.46.3
More information about the U-Boot
mailing list