[PATCH v3 10/31] rockchip: dts: Use the new binman template for the SPI image too
Simon Glass
sjg at chromium.org
Fri Mar 28 19:25:19 CET 2025
Hi Jonas,
On Fri, 28 Mar 2025 at 12:19, Jonas Karlman <jonas at kwiboo.se> wrote:
>
> Hi Simon,
>
> Patch 05 to 10 should still be split out to a separate series.
>
> They help fix an issue that already have a different conflicting patch
> on mailing list [1].
>
> The request to split these patches out was to help/ease work for other
> U-Boot developers such as myself. I have a follow up patch to split out
> HASH and to add support for using crc32 as hash algo, for an upcoming
> RK3506 series. And I have already send a separate series to add RAM boot
> that depends on the fit-template added in patch 08, see [2].
>
> Still keeping these rockchip: dts: patches that are ready to be merged
> in a series that in v3 still does not apply to master or next is
> disappointing. And because it is not possible to apply this series, a
> proper review and testing has not yet been done, something that is just
> delaying your work more than it has to.
>
> I can send these patches as a separate series if you do not have time to
> split these patches out to a separate series, and would also include my
> HASH crc32 patch.
Yes, please go ahead and thank you. You might also consider the
skip-at-start patches at the end.
I have several rockchip boards in my lab, so I'm pretty confident
about the general changes. But perhaps one board is different from the
others. I doubt anyone has all boards.
Regards,
SImon
>
> [1] http://lore.kernel.org/r/20250220-has_rom-u-boot-rockchip-spi-bin-v2-3-d1768ee87808@cherry.de
> [2] http://lore.kernel.org/r/20250220231358.432367-3-jonas@kwiboo.se
>
> Regards,
> Jonas
>
> On 2025-03-28 16:34, Simon Glass wrote:
> > At present simple-bin-spi relies on the u-boot.itb file created by the
> > simple-bin image. Use the template to avoid this, since Binman may
> > change to process images in parallel in the future.
> >
> > Signed-off-by: Simon Glass <sjg at chromium.org>
> > Reviewed-by: Jonas Karlman <jonas at kwiboo.se>
> > Suggested-by: Jonas Karlman <jonas at kwiboo.se>
> > ---
> >
> > Changes in v3:
> > - Keep the filename for the SPI FIT
> >
> > arch/arm/dts/rockchip-u-boot.dtsi | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi
> > index 1e4d6f71123..fb304540787 100644
> > --- a/arch/arm/dts/rockchip-u-boot.dtsi
> > +++ b/arch/arm/dts/rockchip-u-boot.dtsi
> > @@ -207,8 +207,8 @@
> >
> > #ifdef HAS_FIT
> > fit {
> > - type = "blob";
> > filename = "u-boot.itb";
> > + insert-template = <&common_part>;
> > #else
> > u-boot-img {
> > #endif
>
More information about the U-Boot
mailing list