[PATCH 1/3] scsi: fix typo in setup_read_ext()

[Caleb Connolly]

This clears the 6th byte of cmd twice rather than setting the 9th byte
to 0. Fix it.

The only other command that sets the 9th byte is the 64-bit read, so
this likely never caused issues in practise.

Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
 drivers/scsi/scsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index cd0b84c062252118d250b9305728e03f61736600..34ac47c03ab397ca999abf130d84ccbd3be4c419 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -89,9 +89,9 @@ static void scsi_setup_read_ext(struct scsi_cmd *pccb, lbaint_t start,
 	pccb->cmd[5] = (unsigned char)start & 0xff;
 	pccb->cmd[6] = 0;
 	pccb->cmd[7] = (unsigned char)(blocks >> 8) & 0xff;
 	pccb->cmd[8] = (unsigned char)blocks & 0xff;
-	pccb->cmd[6] = 0;
+	pccb->cmd[9] = 0;
 	pccb->cmdlen = 10;
 	pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
 	debug("scsi_setup_read_ext: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
 	      pccb->cmd[0], pccb->cmd[1],

-- 
2.49.0