[PATCH] sunxi: h616: defconfigs: enable eMMC

[Andre Przywara]

Now that eMMC is working properly on H616 devices, it became apparent
that some boards were missing the right defconfig bits to enable eMMC
access.

Add the eMMC device number to the Tanix TX1 and the X96 Mate defconfig,
also the eMMC boot option to the TX1. Oddly enough the X96 Mate had
just this bit already.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 configs/tanix_tx1_defconfig | 2 ++
 configs/x96_mate_defconfig  | 1 +
 2 files changed, 3 insertions(+)

diff --git a/configs/tanix_tx1_defconfig b/configs/tanix_tx1_defconfig
index 28cf9513c30..00e34dc5ad9 100644
--- a/configs/tanix_tx1_defconfig
+++ b/configs/tanix_tx1_defconfig
@@ -14,11 +14,13 @@ CONFIG_MACH_SUN50I_H616=y
 CONFIG_SUNXI_DRAM_H616_LPDDR3=y
 CONFIG_R_I2C_ENABLE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_SPL_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f
 CONFIG_SYS_I2C_SPEED=400000
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_AXP313_POWER=y
 CONFIG_AXP_DCDC3_VOLT=1200
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/x96_mate_defconfig b/configs/x96_mate_defconfig
index bd9b611d6f5..c0628370df9 100644
--- a/configs/x96_mate_defconfig
+++ b/configs/x96_mate_defconfig
@@ -11,6 +11,7 @@ CONFIG_DRAM_SUNXI_TPR11=0xffffdddd
 CONFIG_DRAM_SUNXI_TPR12=0xfedf7557
 CONFIG_MACH_SUN50I_H616=y
 CONFIG_SUNXI_DRAM_H616_DDR3_1333=y
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_R_I2C_ENABLE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_I2C=y
-- 
2.46.3