[PATCH 07/13] board: phytec: phycore_am62ax: Add Network/SPI/DFU env variables
Wadim Egorov
w.egorov at phytec.de
Wed Mar 5 05:58:32 CET 2025
Include the boot logic to boot via Network, from a OSPI/QSPI
NOR flash or via USB DFU.
Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
---
board/phytec/phycore_am62ax/phycore_am62ax.env | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/board/phytec/phycore_am62ax/phycore_am62ax.env b/board/phytec/phycore_am62ax/phycore_am62ax.env
index 77c5ea8d99a..a0eacd1dfc3 100644
--- a/board/phytec/phycore_am62ax/phycore_am62ax.env
+++ b/board/phytec/phycore_am62ax/phycore_am62ax.env
@@ -1,3 +1,8 @@
+#include <env/phytec/k3_dfu.env>
+#include <env/phytec/k3_mmc.env>
+#include <env/phytec/k3_net.env>
+#include <env/phytec/k3_spi.env>
+
fdtaddr=0x88000000
loadaddr=0x82000000
scriptaddr=0x80000000
@@ -12,3 +17,9 @@ mmcroot=2
mmcpart=1
console=ttyS2,115200n8
earlycon=ns16550a,mmio32,0x02800000
+
+get_cmd=tftp
+
+spi_fdt_addr=0x700000
+spi_image_addr=0x800000
+spi_ramdisk_addr=0x1e00000
--
2.34.1
More information about the U-Boot
mailing list