[PATCH 0/1] Add partial reconfiguration console commands

[Naresh Kumar Ravulapalli]

Partial Reconfiguration (pr) command is added to U-Boot console.
Internally the driver uses freeze controller to freeze and unfreeze
a region.

Command is defined as
$ pr start [region ID]
$ pr stop [region ID]

Command can be used as below from U-Boot UART console:
$ bridge enable
$ fatload mmc 0:1 100 pr_bitstream.rbf
$ pr start 0
$ fpga load 0 100 $filesize
$ pr end 0

Naresh Kumar Ravulapalli (1):
  drivers: fpga: Add partial reconfiguration console commands

 drivers/fpga/Kconfig                |   9 ++
 drivers/fpga/Makefile               |   1 +
 drivers/fpga/intel_pr.c             | 191 ++++++++++++++++++++++++++++
 3 files changed, 201 insertions(+)
 create mode 100644 drivers/fpga/intel_pr.c

-- 
2.35.3