[PATCH] serial: Setup default base and frequency for Versal platforms

[Michal Simek]

Add useful default debug uart values for all Versal platforms to simplify
and speed up debug uart enabling.
The similar change has been done for Zynq/ZynqMP by commit ad55d99e3cc3
("serial: Setup serial base and freq for zynq/zynqmp").

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 drivers/serial/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index c4f4a8d78df1..cb5fdc8711d0 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -519,6 +519,8 @@ config DEBUG_UART_BASE
 	default 0x0 if DEBUG_UART_SANDBOX
 	default 0xff000000 if DEBUG_UART_ZYNQ && ARCH_ZYNQMP
 	default 0xe0000000 if DEBUG_UART_ZYNQ && ARCH_ZYNQ
+	default 0xff000000 if DEBUG_UART_PL011 && ARCH_VERSAL
+	default 0xf1920000 if DEBUG_UART_PL011 && (ARCH_VERSAL_NET || ARCH_VERSAL2)
 	help
 	  This is the base address of your UART for memory-mapped UARTs.
 
@@ -554,6 +556,7 @@ config DEBUG_UART_CLOCK
 	default 0 if DEBUG_MVEBU_A3700_UART
 	default 100000000 if DEBUG_UART_ZYNQ && ARCH_ZYNQMP
 	default 50000000 if DEBUG_UART_ZYNQ && ARCH_ZYNQ
+	default 100000000 if DEBUG_UART_PL011 && (ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2)
 	help
 	  The UART input clock determines the speed of the internal UART
 	  circuitry. The baud rate is derived from this by dividing the input
-- 
2.43.0