[PATCH v2 1/3] scsi: fix typo in setup_read_ext()

[Neil Armstrong]

On 26/03/2025 13:24, Caleb Connolly wrote:
> This clears the 6th byte of cmd twice rather than setting the 9th byte
> to 0. Fix it.
> 
> The only other command that sets the 9th byte is the 64-bit read, so
> this likely never caused issues in practise.
> 
> Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
> ---
>   drivers/scsi/scsi.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
> index cd0b84c062252118d250b9305728e03f61736600..34ac47c03ab397ca999abf130d84ccbd3be4c419 100644
> --- a/drivers/scsi/scsi.c
> +++ b/drivers/scsi/scsi.c
> @@ -89,9 +89,9 @@ static void scsi_setup_read_ext(struct scsi_cmd *pccb, lbaint_t start,
>   	pccb->cmd[5] = (unsigned char)start & 0xff;
>   	pccb->cmd[6] = 0;
>   	pccb->cmd[7] = (unsigned char)(blocks >> 8) & 0xff;
>   	pccb->cmd[8] = (unsigned char)blocks & 0xff;
> -	pccb->cmd[6] = 0;
> +	pccb->cmd[9] = 0;
>   	pccb->cmdlen = 10;
>   	pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
>   	debug("scsi_setup_read_ext: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
>   	      pccb->cmd[0], pccb->cmd[1],
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>