[PATCH v4 1/6] board/qualcomm: introduce phone config

[Caleb Connolly]

Phones don't have keyboards! Introduce a phone-specific config fragment
and associated environment file to make U-Boot more useful on these
devices. This allows for navigating via the buttons and enabling
various USB gadget modes or displaying info about U-Boot.

Reviewed-by: Simon Glass <sjg at chromium.org>
Tested-by: Danila Tikhonov <danila at jiaxyga.com> # google-sunfish
Tested-by: Jens Reidel <adrian at mainlining.org> # xiaomi-davinci
Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
 board/qualcomm/qcom-phone.config | 29 +++++++++++++++++++++++++
 board/qualcomm/qcom-phone.env    | 47 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 76 insertions(+)

diff --git a/board/qualcomm/qcom-phone.config b/board/qualcomm/qcom-phone.config
new file mode 100644
index 0000000000000000000000000000000000000000..913c91757c1d77b79b5997597917f9ac002049fb
--- /dev/null
+++ b/board/qualcomm/qcom-phone.config
@@ -0,0 +1,29 @@
+# Settings for phones
+CONFIG_DEFAULT_ENV_FILE="board/qualcomm/qcom-phone.env"
+# Hang on panic so the error message can be read
+CONFIG_PANIC_HANG=y
+# We use pause in various places to allow text to be read
+# before it scrolls off the screen
+CONFIG_CMD_PAUSE=y
+CONFIG_BOOT_RETRY=y
+CONFIG_BOOT_RETRY_TIME=1
+CONFIG_BUTTON_REMAP_PHONE_KEYS=y
+CONFIG_RETRY_BOOTCMD=y
+CONFIG_FASTBOOT_BUF_ADDR=0x1A000000
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_USB_FUNCTION_ACM=y
+CONFIG_CMD_UMS_ABORT_KEYED=y
+
+# Record all console output and let it be dumped via fastboot
+CONFIG_CONSOLE_RECORD=y
+CONFIG_CONSOLE_RECORD_INIT_F=y
+CONFIG_CONSOLE_RECORD_OUT_SIZE=0x6000
+CONFIG_FASTBOOT_CMD_OEM_CONSOLE=y
+
+# Only MMC is supported by fastboot currently, but this is still useful.
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_OEM_RUN=y
+
+# Many phones don't actually define a serial port in their DTS
+# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
diff --git a/board/qualcomm/qcom-phone.env b/board/qualcomm/qcom-phone.env
new file mode 100644
index 0000000000000000000000000000000000000000..6750b6daaed8695faa2fbe1546c1582713f7d56f
--- /dev/null
+++ b/board/qualcomm/qcom-phone.env
@@ -0,0 +1,47 @@
+bootdelay=0
+bootretry=1
+stdin=serial,button-kbd
+stdout=serial,vidconsole
+stderr=serial,vidconsole
+
+# Fastboot is keen to use the address from kconfig, but we
+# allocate its buffer at runtime.
+fastboot=fastboot -l $fastboot_addr_r usb 0
+
+# Always probe for UFS storage, though it should be done by board code.
+preboot=scsi scan
+
+# Shortcut to enable USB serial gadget and disable bootretry
+serial_gadget=setenv stdin serial,button-kbd,usbacm; \
+	setenv stdout serial,vidconsole,usbacm; \
+	setenv stderr serial,vidconsole,usbacm; \
+	setenv bootretry -1; \
+	echo Enabled U-Boot console serial gadget
+
+# bootretry will run this command over and over, if we fail once
+# then bail out to the boot menu instead (with a pause to read
+# the error message)
+bootcmd=bootefi bootmgr; pause; run menucmd
+
+# When entering the menu (either from button press or failed boot)
+# remap bootcmd so it will re-open the menu and we won't get stuck
+# at the console with no way to type
+menucmd=setenv bootcmd run menucmd; bootmenu -1
+
+# Pause is used so the output can be read on the display
+bootmenu_0=Boot=bootefi bootmgr; pause
+bootmenu_1=Enable serial console gadget=run serial_gadget
+bootmenu_2=Enable USB mass storage=echo "Press any key to exit UMS mode"; ums 0 scsi 0
+bootmenu_3=Enable fastboot mode=run fastboot
+# Disabling bootretry means we'll just drop the shell
+bootmenu_4=Drop to shell=setenv bootretry -1
+bootmenu_5=Reset device=reset
+bootmenu_6=Dump clocks=clk dump; pause
+bootmenu_7=Dump environment=printenv; pause
+bootmenu_8=Board info=bdinfo; pause
+bootmenu_9=Dump bootargs=fdt print /chosen bootargs; pause
+
+# Allow holding the power button while U-Boot loads to enter
+# the boot menu
+button_cmd_0_name=Volume Down
+button_cmd_0=run menucmd

-- 
2.49.0