[PATCH v7 15/19] tools: imx8image: add i.MX95 support

Lothar Waßmann LW at KARO-electronics.de
Thu Mar 6 06:51:02 CET 2025


Hi,

On Wed, 05 Mar 2025 21:28:27 +0800 Alice Guo (OSS) wrote:
> From: Alice Guo <alice.guo at nxp.com>
> 
> i.MX95 uses binman to invoke mkimage to create image container. 2 image
> containers are needed currently. The first one is composed of
> ahab-container.img, LPDDR firmware images, OEI images, System Manager
> image and u-boot-spl.bin. The second one is consisted of ARM Trusted
> firmware and u-boot.bin.
> 
> Because DDR OEI image and LPDDR firmware images have to be packaged
> together and named as m33-oei-ddrfw.bin by binman, so imx9_image.sh does
> not check if m33-oei-ddrfw.bin exists.
> 
> When using "make imx95_19x19_evk_defconfig; make", imx9_image.sh will
> delete the line for u-boot.bin in container.cfg. In fact, binman is
> always called after the u-boot.bin is built, so imx9_image.sh does not
> check if u-boot.bin exists.
> 
> Signed-off-by: Alice Guo <alice.guo at nxp.com>
> ---
>  include/imx8image.h |  19 +++++--
>  tools/imx8image.c   | 143 +++++++++++++++++++++++++++++++++++++++++++++++-----
>  tools/imx9_image.sh |   8 +++
>  3 files changed, 153 insertions(+), 17 deletions(-)
> 
> diff --git a/include/imx8image.h b/include/imx8image.h
> index 6b95e93fb5..b48e2b0396 100644
> --- a/include/imx8image.h
> +++ b/include/imx8image.h
> @@ -157,7 +157,9 @@ enum imx8image_cmd {
>  	CMD_SOC_TYPE,
>  	CMD_CONTAINER,
>  	CMD_IMAGE,
> -	CMD_DATA
> +	CMD_DATA,
> +	CMD_DUMMY_V2X,
> +	CMD_HOLD
add comma to facilitate extending the enum...

>  enum imx8image_core_type {
> @@ -169,7 +171,9 @@ enum imx8image_core_type {
>  	CFG_A35,
>  	CFG_A55,
>  	CFG_A53,
> -	CFG_A72
> +	CFG_A72,
> +	CFG_M33,
> +	CFG_OEI
dto.
>  
>  enum imx8image_fld_types {
> @@ -208,7 +212,10 @@ typedef enum option_type {
>  	FILEOFF,
>  	MSG_BLOCK,
>  	SENTINEL,
> -	UPOWER
> +	UPOWER,
> +	OEI,
> +	DUMMY_V2X,
> +	HOLD
dto.

[...]
> diff --git a/tools/imx8image.c b/tools/imx8image.c
> index 0135b19095..94b1efacd1 100644
> --- a/tools/imx8image.c
> +++ b/tools/imx8image.c
> @@ -7,6 +7,7 @@
>  
>  #include "imx8image.h"
>  #include <image.h>
> +#include <linux/sizes.h>
>  
>  static int p_idx;
>  static int sector_size;
> @@ -54,6 +55,8 @@ static table_entry_t imx8image_cmds[] = {
>  	{CMD_CONTAINER,         "CONTAINER",            "new container",      },
>  	{CMD_IMAGE,             "IMAGE",                "new image",          },
>  	{CMD_DATA,              "DATA",                 "new data",           },
> +	{CMD_DUMMY_V2X,         "DUMMY_V2X",            "v2x",                },
> +	{CMD_HOLD,              "HOLD",                 "hold",               },
>  	{-1,                    "",                     "",	              },
>  };
>  
the list terminator entry should not have a comment at the end, since
it MUST ALWAYS be the last entry.
Without comma adding an entry after the terminator (e.g. when resolving
a merge conflict) will lead to a compile error.
Otherwise adding an entry after the terminator would go unnoticed.

> @@ -66,6 +69,8 @@ static table_entry_t imx8image_core_entries[] = {
>  	{CFG_A55,	"A55",			"A55 core",	},
>  	{CFG_A53,	"A53",			"A53 core",	},
>  	{CFG_A72,	"A72",			"A72 core",	},
> +	{CFG_OEI,	"OEI",			"OEI", },
> +	{CFG_M33,	"M33",			"M33 core", },
>  	{-1,		"",			"",		},
>  };
>  
dto.


Lothar Waßmann


More information about the U-Boot mailing list