[PATCH 1/8] arm: dts: k3-am625-phyboard-lyra-rdk: Add boot phase tag to phy_gmii_sel

[Daniel Schultz]

On 3/25/25 04:58, Wadim Egorov wrote:
> Add bootph-all tag to phy_gmii_sel node. This is needed for booting via
> Ethernet. While at it, drop main_pktdma reg redefinitions which are already
> provided by the top-level SoC device tree file.
>
> Signed-off-by: Wadim Egorov <w.egorov at phytec.de>

For entire series,
Tested-by: Daniel Schultz <d.schultz at phytec.de>

> ---
>   .../arm/dts/k3-am625-phyboard-lyra-rdk-u-boot.dtsi | 14 ++++----------
>   1 file changed, 4 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/dts/k3-am625-phyboard-lyra-rdk-u-boot.dtsi b/arch/arm/dts/k3-am625-phyboard-lyra-rdk-u-boot.dtsi
> index 2bc5acbec23..253ca297e12 100644
> --- a/arch/arm/dts/k3-am625-phyboard-lyra-rdk-u-boot.dtsi
> +++ b/arch/arm/dts/k3-am625-phyboard-lyra-rdk-u-boot.dtsi
> @@ -42,6 +42,10 @@
>   	bootph-all;
>   };
>   
> +&phy_gmii_sel {
> +	bootph-all;
> +};
> +
>   &fss {
>   	bootph-all;
>   };
> @@ -86,16 +90,6 @@
>   
>   &main_pktdma {
>   	bootph-all;
> -	reg = <0x00 0x485c0000 0x00 0x100>,
> -	      <0x00 0x4a800000 0x00 0x20000>,
> -	      <0x00 0x4aa00000 0x00 0x20000>,
> -	      <0x00 0x4b800000 0x00 0x200000>,
> -	      <0x00 0x485e0000 0x00 0x10000>,
> -	      <0x00 0x484a0000 0x00 0x2000>,
> -	      <0x00 0x484c0000 0x00 0x2000>,
> -	      <0x00 0x48430000 0x00 0x1000>;
> -	reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
> -		    "cfg", "tchan", "rchan", "rflow";
>   };
>   
>   &main_rgmii1_pins_default {