[PATCH V3 3/6] cpu: imx8_cpu: Print Speed grade if IMX_THERMAL or IMX_TMU

[Adam Ford]

Much of the data that is display by imx8_cpu.c is also displayed from
arch/arm/mach-imx/cpu.c, except the temperature grade and active
temperature are only displayed when SoC is an i.MX9. Since IMX9 now
implies IMX_TMU, change this to check for IMX_THERMAL or IMX_TMU
in the same way it's done in mach-imx/cpu.c to enable displaying
this information for any SoC with either of these configs enabled.

Before:
CPU:   NXP i.MX8MP Rev1.1 A53 at 1200 MHz
Model: Beacon EmbeddedWorks i.MX8MPlus Development kit

After:
CPU:   NXP i.MX8MP Rev1.1 A53 at 1200 MHz
CPU:   Industrial temperature grade  (-40C to 105C) at 28C
Model: Beacon EmbeddedWorks i.MX8MPlus Development kit

Signed-off-by: Adam Ford <aford173 at gmail.com>
---
 drivers/cpu/imx8_cpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpu/imx8_cpu.c b/drivers/cpu/imx8_cpu.c
index 53d31b3c0bf..faa6a0704a6 100644
--- a/drivers/cpu/imx8_cpu.c
+++ b/drivers/cpu/imx8_cpu.c
@@ -177,7 +177,7 @@ static int cpu_imx_get_desc(const struct udevice *dev, char *buf, int size)
 	ret = snprintf(buf, size, "NXP i.MX%s Rev%s %s at %u MHz",
 		       plat->type, plat->rev, plat->name, plat->freq_mhz);
 
-	if (IS_ENABLED(CONFIG_IMX9)) {
+	if (IS_ENABLED(CONFIG_IMX_THERMAL) || IS_ENABLED(CONFIG_IMX_TMU)) {
 		switch (get_cpu_temp_grade(&minc, &maxc)) {
 		case TEMP_AUTOMOTIVE:
 			grade = "Automotive temperature grade ";
-- 
2.45.2