[PATCH v1 1/1] sysreset: add PHASE_ to GPIO reset and poweroff configs

[Quentin Schulz]

On 3/31/25 12:27 PM, Svyatoslav Ryhel wrote:
> пн, 31 бер. 2025 р. о 13:16 Quentin Schulz <quentin.schulz at cherry.de> пише:
>>
>> Hi Svyatoslav,
>>
>> On 3/30/25 11:28 AM, Svyatoslav Ryhel wrote:
>>> GPIO reset and power-off functionality depends on device tree data, which
>>> is often absent in SPL or TPL. To address this, incorporate PHASE_ into the
>>> config option.
>>>
>>> Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
>>> ---
>>>    drivers/sysreset/Makefile | 4 ++--
>>>    1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/sysreset/Makefile b/drivers/sysreset/Makefile
>>> index 796fc9effa5..ded91a4d325 100644
>>> --- a/drivers/sysreset/Makefile
>>> +++ b/drivers/sysreset/Makefile
>>> @@ -8,8 +8,8 @@ obj-$(CONFIG_ARCH_ROCKCHIP) += sysreset_rockchip.o
>>>    obj-$(CONFIG_ARCH_STI) += sysreset_sti.o
>>>    obj-$(CONFIG_SANDBOX) += sysreset_sandbox.o
>>>    obj-$(CONFIG_SYSRESET_CV1800B) += sysreset_cv1800b.o
>>> -obj-$(CONFIG_POWEROFF_GPIO) += poweroff_gpio.o
>>> -obj-$(CONFIG_SYSRESET_GPIO) += sysreset_gpio.o
>>> +obj-$(CONFIG_$(PHASE_)POWEROFF_GPIO) += poweroff_gpio.o
>>> +obj-$(CONFIG_$(PHASE_)SYSRESET_GPIO) += sysreset_gpio.o
>>
>> Are you sure this is safe for all boards?
>>
>> Essentially, right now POWEROFF_GPIO/SYSRESET_GPIO would be built for
>> devices with TPL/SPL_SYSRESET symbol enabled, but with this change it
>> would be disabled, possibly breaking their setup.
>>
>> I'm not against this change, it's just that there may be additional
>> changes made to defconfigs to transition to this new symbol...
>>
>> ... which you haven't added here. I don't know what's the policy, but I
>> think it makes sense to add the VPL/TPL/SPL symbols here so that people
> 
> You mean config SPL_POWEROFF_GPIO and SPL_SYSRESET_GPIO? It seems a
> good idea, I wonder if there is a simpler way to add this without
> adding Kconfig entry for every boot stage. Maybe you know such
> example?
> 

We don't have such a mechanism, each symbol needs to be "duplicated" 
right now.

The thing is, we cannot really automate it (globally at the very least) 
as some symbols have different dependencies (and possibly different 
default values, etc...) depending on which PHASE they apply. 
Additionally, some symbols are for all PHASEs, not only proper. Maybe 
there's some magic we can have in Kconfig for that, but we would need to 
create a plugin for it.

I think this may have been raised in the "xPL proposal" thread on the ML.

Cheers,
Quentin