[PATCH v1 13/13] video: bridge: ssd2825: fix reset gpio direction

[Svyatoslav Ryhel]

The reset GPIO signal operates with a low-active logic. The driver
needs to be adjusted to correctly handle this.

Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
---
 drivers/video/bridge/ssd2825.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/video/bridge/ssd2825.c b/drivers/video/bridge/ssd2825.c
index 2a49b895404..a307993377c 100644
--- a/drivers/video/bridge/ssd2825.c
+++ b/drivers/video/bridge/ssd2825.c
@@ -471,17 +471,17 @@ static int ssd2825_bridge_hw_init(struct udevice *dev)
 	}
 	mdelay(10);
 
-	ret = dm_gpio_set_value(&uc_priv->reset, 0);
+	ret = dm_gpio_set_value(&uc_priv->reset, 1);
 	if (ret) {
-		log_debug("%s: error changing reset-gpios (%d)\n",
+		log_debug("%s: error entering reset (%d)\n",
 			  __func__, ret);
 		return ret;
 	}
 	mdelay(10);
 
-	ret = dm_gpio_set_value(&uc_priv->reset, 1);
+	ret = dm_gpio_set_value(&uc_priv->reset, 0);
 	if (ret) {
-		log_debug("%s: error changing reset-gpios (%d)\n",
+		log_debug("%s: error exiting reset (%d)\n",
 			  __func__, ret);
 		return ret;
 	}
-- 
2.43.0