[PATCH V4 4/7] cpu: imx8_cpu: Print Speed grade if IMX_TMU.

[Marek Vasut]

On 3/25/25 3:54 AM, Adam Ford wrote:
> Much of the data that is display by imx8_cpu.c is also displayed from
> arch/arm/mach-imx/cpu.c, except the temperature grade and active
> temperature are only displayed when SoC is an i.MX9. Since IMX9 now
> implies IMX_TMU, change this to check for IMX_TMU in the same way
> it's done in mach-imx/cpu.c to enable displaying this information
> for any SoC with either of this config enabled.
> Since additional text may appear due to this commit, remove
> the extra space in the message displaying the temperature
> grade.
> 
> Before:
> CPU:   NXP i.MX8MP Rev1.1 A53 at 1200 MHz
> Model: Beacon EmbeddedWorks i.MX8MPlus Development kit
> 
> After:
> CPU:   NXP i.MX8MP Rev1.1 A53 at 1200 MHz
> CPU:   Industrial temperature grade (-40C to 105C) at 28C
> Model: Beacon EmbeddedWorks i.MX8MPlus Development kit
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>
Please drop the fullstop at the end of Subject and then add

Reviewed-by: Marek Vasut <marek.vasut+renesas at mailbox.org>

To the whole series.

Thanks !