[PATCH] ARM: stm32: Fix DBGMCU macro on STM32MP13xx

[Marek Vasut]

The DBGMCU block is available at address 0x50081000 both on STM32MP13xx
and on STM32MP15xx . There is no reason to limit the DBGMCU macro being
set only on STM32MP15xx , remove the ifdeffery.

Signed-off-by: Marek Vasut <marek.vasut at mailbox.org>
---
Cc: Patrice Chotard <patrice.chotard at foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Sughosh Ganu <sughosh.ganu at linaro.org>
Cc: Tom Rini <trini at konsulko.com>
Cc: u-boot at lists.denx.de
Cc: uboot-stm32 at st-md-mailman.stormreply.com
---
 arch/arm/mach-stm32mp/include/mach/stm32.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
index 47b459b75d1..dfba57e7dc4 100644
--- a/arch/arm/mach-stm32mp/include/mach/stm32.h
+++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
@@ -78,9 +78,7 @@ enum forced_boot_mode {
 #define STM32_RCC_BASE			0x50000000
 #define STM32_PWR_BASE			0x50001000
 #define STM32_SYSCFG_BASE		0x50020000
-#ifdef CONFIG_STM32MP15X
 #define STM32_DBGMCU_BASE		0x50081000
-#endif
 #define STM32_FMC2_BASE			0x58002000
 #define STM32_IWDG2_BASE		0x5A002000
 #define STM32_DDRCTRL_BASE		0x5A003000
-- 
2.47.2