[PATCH] ARM: stm32: Fix DBGMCU macro on STM32MP13xx

Patrice CHOTARD patrice.chotard at foss.st.com
Wed May 21 15:59:25 CEST 2025



On 5/12/25 18:44, Marek Vasut wrote:
> The DBGMCU block is available at address 0x50081000 both on STM32MP13xx
> and on STM32MP15xx . There is no reason to limit the DBGMCU macro being
> set only on STM32MP15xx , remove the ifdeffery.
> 
> Signed-off-by: Marek Vasut <marek.vasut at mailbox.org>
> ---
> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Sughosh Ganu <sughosh.ganu at linaro.org>
> Cc: Tom Rini <trini at konsulko.com>
> Cc: u-boot at lists.denx.de
> Cc: uboot-stm32 at st-md-mailman.stormreply.com
> ---
>  arch/arm/mach-stm32mp/include/mach/stm32.h | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
> index 47b459b75d1..dfba57e7dc4 100644
> --- a/arch/arm/mach-stm32mp/include/mach/stm32.h
> +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
> @@ -78,9 +78,7 @@ enum forced_boot_mode {
>  #define STM32_RCC_BASE			0x50000000
>  #define STM32_PWR_BASE			0x50001000
>  #define STM32_SYSCFG_BASE		0x50020000
> -#ifdef CONFIG_STM32MP15X
>  #define STM32_DBGMCU_BASE		0x50081000
> -#endif
>  #define STM32_FMC2_BASE			0x58002000
>  #define STM32_IWDG2_BASE		0x5A002000
>  #define STM32_DDRCTRL_BASE		0x5A003000

Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks
Patrice


More information about the U-Boot mailing list