[PATCH v2 7/7] doc: ti: k3: Add section for DDR configuration

[Neha Malcom Francis]

Add a concise section for DDR configuration pointing to the public tool
that can be used to generate the configuration DTSI.

Signed-off-by: Neha Malcom Francis <n-francis at ti.com>
---
Changes since v1:
- new patch

 doc/board/ti/k3.rst | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst
index 01fb9411688..de66b830703 100644
--- a/doc/board/ti/k3.rst
+++ b/doc/board/ti/k3.rst
@@ -649,6 +649,17 @@ Refer (:ref:`U-boot ARMV8 build <k3_rst_include_start_build_steps_uboot>`)
    This will need to be explicitly disabled by changing the boot_targets to
    disallow fallback during testing.
 
+DDR Configuration
+-----------------
+
+The K3 DDRSS driver (drivers/ram/k3-ddrss/k3-ddrss.c) configures the DDR during
+the R5 SPL stage. The driver utilizes an auto-generated configuration file
+containing necessary settings for the DDR. It configures the frequency, timing
+parameters, training algorithms etc. for DDR initialization. The configuration
+DTSI can be generated using the `Sysconfig tool <https://dev.ti.com/sysconfig>`_
+and selecting the software product as "DDR Configuration for \*" as well as the
+required device.
+
 Saving environment
 ------------------
 
-- 
2.34.1