November 2025 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Nov 1 00:15:25 CET 2025
Ending: Fri Nov 28 17:11:04 CET 2025
Messages: 2451

• [PATCH 0/3] qfw/acpi: do not zero out XSDT address   Heinrich Schuchardt
• building u-boot without pxe, dhcp, etc.   andrew at internet-e-mail.com
  • building u-boot without pxe, dhcp, etc.   Fabio Estevam
    • building u-boot without pxe, dhcp, etc.   andrew at internet-e-mail.com
• [PATCH 00/19] arm: airoha: add support for en7523 based boards   Mikhail Kshevetskiy
  • [PATCH 03/19] arm: airoha: introduce AN7581 helpers to get SCU and CHIP_SCU regmaps   Mikhail Kshevetskiy
  • [PATCH 04/19] arm: airoha: introduce EN7523 helpers to get SCU and CHIP_SCU regmaps   Mikhail Kshevetskiy
  • [PATCH 05/19] clk: airoha: use CHIP_SCU regmap helper   Mikhail Kshevetskiy
  • [PATCH 06/19] clk: airoha: add support for airoha en7523 SoC family   Mikhail Kshevetskiy
  • [PATCH 07/19] configs: airoha: en7523: enable clk support   Mikhail Kshevetskiy
  • [PATCH 08/19] reset: airoha: convert to regmap API   Mikhail Kshevetskiy
  • [PATCH 09/19] reset: airoha: unify code using SCU regmap helper   Mikhail Kshevetskiy
  • [PATCH 10/19] dt-bindings: reset: Add reset support for Airoha EN7523   Mikhail Kshevetskiy
    • [PATCH 10/19] dt-bindings: reset: Add reset support for Airoha EN7523   Tom Rini
      • [PATCH 10/19] dt-bindings: reset: Add reset support for Airoha EN7523   Mikhail Kshevetskiy
      • [PATCH 10/19] dt-bindings: reset: Add reset support for Airoha EN7523   Tom Rini
      • [PATCH 10/19] dt-bindings: reset: Add reset support for Airoha EN7523   Mikhail Kshevetskiy
  • [PATCH 11/19] reset: airoha: add support for airoha en7523 SoC family   Mikhail Kshevetskiy
  • [PATCH 12/19] dts: airoha: en7523: add reset controller support   Mikhail Kshevetskiy
  • [PATCH 13/19] configs: airoha: en7523: enable reset controller support   Mikhail Kshevetskiy
  • [PATCH 14/19] net: airoha: unify code using SCU regmap helper   Mikhail Kshevetskiy
  • [PATCH 15/19] net: airoha: add support for airoha en7523 SoC family   Mikhail Kshevetskiy
  • [PATCH 16/19] dts: airoha: en7523: add ethernet controller support   Mikhail Kshevetskiy
  • [PATCH 17/19] configs: airoha: en7523: enable ethernet controller support   Mikhail Kshevetskiy
  • [PATCH 18/19] dts: airoha: en7523: add spinand flash support   Mikhail Kshevetskiy
  • [PATCH 19/19] configs: airoha: en7523: enable spinand flashes support   Mikhail Kshevetskiy
  • [PATCH 00/19] arm: airoha: add support for en7523 based boards   Tom Rini
• [PATCH 01/19] airoha/an7581: add CONFIG_TARGET_AN7581=y to the defconfig   Mikhail Kshevetskiy
• [PATCH 02/19] arm/airoha: add support for airoha en7523 SoC family   Mikhail Kshevetskiy
• [PATCH v1] Add make feature support for SoCFPGA Handoff   Brian Sune
• [PATCH v2] Add make feature support for SoCFPGA Handoff   Brian Sune
  • [PATCH v2] Add make feature support for SoCFPGA Handoff   Tom Rini
    • [PATCH v2] Add make feature support for SoCFPGA Handoff   Sune Brian
      • [PATCH v2] Add make feature support for SoCFPGA Handoff   Tom Rini
      • [PATCH v2] Add make feature support for SoCFPGA Handoff   Sune Brian
      • [PATCH v2] Add make feature support for SoCFPGA Handoff   Tom Rini
      • [PATCH v2] Add make feature support for SoCFPGA Handoff   Sune Brian
      • [PATCH v2] Add make feature support for SoCFPGA Handoff   Tom Rini
      • [PATCH v2] Add make feature support for SoCFPGA Handoff   Sune Brian
• [PATCH 2/3] mach-k3: refactor A53 speed grade clock-rate fixup   Aniket Limaye
  • [PATCH 2/3] mach-k3: refactor A53 speed grade clock-rate fixup   Anshul Dalal
    • [PATCH 2/3] mach-k3: refactor A53 speed grade clock-rate fixup   Aniket Limaye
• [PATCH] mtd: spinand: add support for FudanMicro FM25S01A   Mikhail Kshevetskiy
  • [PATCH] mtd: spinand: add support for FudanMicro FM25S01A   Mikhail Kshevetskiy
  • [PATCH] mtd: spinand: add support for FudanMicro FM25S01A   Tianling Shen
• [PATCH v2] mtd: spinand: add support for FudanMicro FM25S01A   Tianling Shen
  • [PATCH v2] mtd: spinand: add support for FudanMicro FM25S01A   Mikhail Kshevetskiy
    • [PATCH v2] mtd: spinand: add support for FudanMicro FM25S01A   Mikhail Kshevetskiy
• [PATCH 0/2] coverity and 64-bit division fixes   Mikhail Kshevetskiy
  • [PATCH 1/2] cmd: mtd: benchmark: use lldiv() instead of 64-bit division   Mikhail Kshevetskiy
  • [PATCH 2/2] spi: spi-mem: fix coverity report CID 537478   Mikhail Kshevetskiy
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Mikhail Kshevetskiy
  • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
    • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Michael Nazzareno Trimarchi
  • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
    • New Defects reported by Coverity Scan for Das U-Boot   Kory Maincent
  • Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH v1 0/5] Add support for SM3 secure hash   Heiko Schocher
• [PATCH v1 1/5] lib: Import rol32 function from Linux   Heiko Schocher
• [PATCH v1 2/5] lib: implement SM3 secure hash   Heiko Schocher
  • [PATCH v1 2/5] lib: implement SM3 secure hash   Raymond Mao
    • [PATCH v1 2/5] lib: implement SM3 secure hash   Heiko Schocher
      • [PATCH v1 2/5] lib: implement SM3 secure hash   Raymond Mao
• [PATCH v1 3/5] test: cmd: add unit test for sm3 hash   Heiko Schocher
• [PATCH v1 4/5] tpm2: add sm3 256 hash support   Heiko Schocher
  • [PATCH v1 4/5] tpm2: add sm3 256 hash support   Ilias Apalodimas
    • [PATCH v1 4/5] tpm2: add sm3 256 hash support   Heiko Schocher
• [PATCH v1 5/5] test: cmd: fix a typo in md5 test   Heiko Schocher
  • [PATCH v1 5/5] test: cmd: fix a typo in md5 test   Heinrich Schuchardt
• [PATCH v4 5/5] net: phy: aquantia: use generic firmware loader   Beiyan Yun
  • [PATCH v4 5/5] net: phy: aquantia: use generic firmware loader   Marek Vasut
    • [PATCH v4 5/5] net: phy: aquantia: use generic firmware loader   Beiyan Yun
      • [PATCH v4 5/5] net: phy: aquantia: use generic firmware loader   Marek Vasut
• [PATCH 1/3] board: theobroma-systems: update instructions for newer Rockchip rkbin   Kever Yang
• [PATCH 2/3] board: theobroma-systems: add instructions for how to use upstream TF-A   Kever Yang
• [PATCH 3/3] board: theobroma-systems: jaguar_rk3588: explicit UART IOMUX   Kever Yang
• [PATCH 1/4] rockchip: px30: use rockchip_stimer_init from spl_common.o for TPL   Kever Yang
• [PATCH 2/4] rockchip: rk3036: use rockchip_stimer_init from spl_common.o   Kever Yang
• [PATCH 3/4] rockchip: rk3399: fix TIMER_FMODE constant   Kever Yang
• [PATCH 4/4] rockchip: spl_common: fix TIMER_FMODE constant   Kever Yang
• [PATCH] rockchip: imply most symbols for ARCH_ROCKCHIP   Kever Yang
  • [PATCH] rockchip: imply most symbols for ARCH_ROCKCHIP   Simon Glass
• [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Simon Glass
  • [Uboot-stm32] [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Raphaël Gallais-Pou
    • [Uboot-stm32] [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Simon Glass
      • [Uboot-stm32] [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Tom Rini
      • [Uboot-stm32] [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Raphael Gallais-Pou
      • [Uboot-stm32] [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Tom Rini
      • [Uboot-stm32] [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Patrice CHOTARD
      • [Uboot-stm32] [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Simon Glass
      • [Uboot-stm32] [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Tom Rini
      • [Uboot-stm32] [PATCH v3 1/7] ofnode: support panel-timings in ofnode_decode_display_timing   Simon Glass
• [PATCH] binman: btool: mkimage: fix Bintoolmkimage.run() method docstring   Simon Glass
  • [PATCH] binman: btool: mkimage: fix Bintoolmkimage.run() method docstring   Kever Yang
• [PATCH 1/1] CI: test qemu-riscv64_smode[_acpi]   Simon Glass
• [PATCH 0/2] Fix AArch32 compilation with Clang   Dmitrii Sharshakov
  • [PATCH 1/2] arch: arm: build: only set -mgeneral-regs-only for AArch64   Dmitrii Sharshakov
  • [PATCH 2/2] build: fix building u-boot.lds with Clang as a cross-compiler   Dmitrii Sharshakov
  • [PATCH 0/2] Fix AArch32 compilation with Clang   Tom Rini
  • [PATCH 0/2] Fix AArch32 compilation with Clang   Tom Rini
    • [PATCH 0/2] Fix AArch32 compilation with Clang   Tom Rini
      • [PATCH 0/2] Fix AArch32 compilation with Clang   Dmitrii Sharshakov
      • [PATCH 0/2] Fix AArch32 compilation with Clang   Tom Rini
• [PATCH v5 0/2] net: phy: aquantia: Switch to generic firmware loader   Beiyan Yun
  • [PATCH v5 1/2] net: phy: aquantia: refactor firmware upload helpers   Beiyan Yun
  • [PATCH v5 2/2] net: phy: aquantia: use generic firmware loader   Beiyan Yun
  • [PATCH v5 0/2] net: phy: aquantia: Switch to generic firmware loader   Beiyan Yun
    • [PATCH v5 0/2] net: phy: aquantia: Switch to generic firmware loader   Jerome Forissier
      • [PATCH v5 0/2] net: phy: aquantia: Switch to generic firmware loader   Marek Vasut
      • [PATCH v5 0/2] net: phy: aquantia: Switch to generic firmware loader   Jerome Forissier
• [PATCH] board: rockchip: add Lunzn FastRhino R66S   Kever Yang
• [PATCH] board: rockchip: Fix RG353M model renaming   Kever Yang
• [PATCH v2] board: rockchip: Add support for rk3588 MNT Reform2   Kever Yang
• [PATCH] rockchip: Ensure env in SPI Flash can work correctly   Jonas Karlman
  • [PATCH] rockchip: Ensure env in SPI Flash can work correctly   Kever Yang
• [PATCH v2] rockchip: spl-boot-order: Defer probe of boot device   Jonas Karlman
  • [PATCH v2] rockchip: spl-boot-order: Defer probe of boot device   Kever Yang
• [PATCH v2] mmc: rockchip_sdhci: Set xx_TAP_VALUE for RK3528   Jonas Karlman
  • [PATCH v2] mmc: rockchip_sdhci: Set xx_TAP_VALUE for RK3528   Kever Yang
• How do I set cpp_flags for environment text files ?   Michael Chaffin
• [PATCH] CI: Move to Ubuntu 24.04 'Noble' as the base   Tom Rini
  • [PATCH] CI: Move to Ubuntu 24.04 'Noble' as the base   Tom Rini
• [PATCH] Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"   Jonas Karlman
  • Re: [PATCH] Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"   Dragan Simic
  • [PATCH] Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"   Mark Kettenis
    • Re: [PATCH] Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"   Dragan Simic
      • [PATCH] Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"   Jonas Karlman
      • Re: [PATCH] Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"   Dragan Simic
  • [PATCH] Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"   Sune Brian
  • [PATCH] Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"   Sune Brian
  • [PATCH] rockchip: remove regulator enable from device probe   Brian Sune
    • [PATCH] rockchip: remove regulator enable from device probe   Sune Brian
  • [PATCH] Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"   Peng Fan
  • [PATCH] Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"   Jonas Karlman
    • [PATCH] Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"   Quentin Schulz
    • [PATCH] Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"   Ye Li
      • [PATCH] Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"   Jonas Karlman
  • [PATCH] Revert "power: regulator: Add vin-supply for GPIO and Fixed regulators"   Tom Rini
• [PATCH 1/5] clk: rockchip: rk3368: Add bus clk get/set   Kever Yang
• [PATCH 2/5] clk: rockchip: rk3368: add SCLK for mmc clock get/set   Kever Yang
• [PATCH 3/5] clk: rockchip: rk3368: Add VOP clock get/set   Kever Yang
• Pull request: u-boot-rockchip-20251101   Kever Yang
  • Pull request: u-boot-rockchip-20251101   Tom Rini
    • Pull request: u-boot-rockchip-20251101   Peter Robinson
• [PATCH] spi-nor: add support for XM25QH01D   Ssunk
  • [PATCH] spi-nor: add support for XM25QH01D   Marek Vasut
    • [PATCH v2] spi-nor: add support for XM25QH01D   Ssunk
      • [PATCH v2] spi-nor: add support for XM25QH01D   Marek Vasut
      • [PATCH v2] spi-nor: add support for XM25QH01D   Ssunk
      • [PATCH v2] spi-nor: add support for XM25QH01D   Marek Vasut
• [PATCH] mtd: spi-nor: add support for XMC XM25QH256D/XM25QH512D   Ssunk
• [PATCH] mtd: spi-nor: Add support for Dosilicon DS25Q4CB/DS25Q4DN   Ssunk
• [U-Boot, v2, 1/1]net: phy: add paged PHY register accessors   Marek Vasut
  • [U-Boot, v2, 1/1]net: phy: add paged PHY register accessors   Lucien.Jheng
  • [U-Boot, v2, 1/1]net: phy: add paged PHY register accessors   Lucien.Jheng
  • [U-Boot, v2, 1/1]net: phy: add paged PHY register accessors   Marek Vasut
    • [U-Boot, v2, 1/1]net: phy: add paged PHY register accessors   Lucien Jheng
    • [U-Boot, v2, 1/1]net: phy: add paged PHY register accessors   Marek Vasut
• [PATCH] CI: Update to LLVM 20 release   Tom Rini
  • [PATCH] CI: Update to LLVM 20 release   Tom Rini
• [PATCH] imx9: scmi: Drop parenthesis around enable   Marek Vasut
  • [PATCH] imx9: scmi: Drop parenthesis around enable   Peng Fan
  • [PATCH] imx9: scmi: Drop parenthesis around enable   Fabio Estevam
• Re: 回复: [PATCH v2] firmware: scmi: Add clock v3.2 CONFIG_SET support   Marek Vasut
  • 回复: 回复: [PATCH v2] firmware: scmi: Add clock v3.2 CONFIG_SET support   Alice Guo (OSS)
    • Re: 回复: 回复: [PATCH v2] firmware: scmi: Add clock v3.2 CONFIG_SET support   Marek Vasut
• [GIT PULL] Please pull u-boot-imx-master-20251030   Tom Rini
• [PATCH v2 2/5] boot: remove duplicate config entry for VPL_FIT   Simon Glass
• [PATCH v2 3/5] boot: group SPL_FIT symbols together   Simon Glass
• [PATCH 3/3] configs: CONFIG_CONSOLE_RECORD=y on qemu-riscv64_smode_acpi   Simon Glass
  • [PATCH 3/3] configs: CONFIG_CONSOLE_RECORD=y on qemu-riscv64_smode_acpi   Bin Meng
    • [PATCH 3/3] configs: CONFIG_CONSOLE_RECORD=y on qemu-riscv64_smode_acpi   Heinrich Schuchardt
      • [PATCH 3/3] configs: CONFIG_CONSOLE_RECORD=y on qemu-riscv64_smode_acpi   Tom Rini
      • [PATCH 3/3] configs: CONFIG_CONSOLE_RECORD=y on qemu-riscv64_smode_acpi   Heinrich Schuchardt
• [PATCH 1/1] sound: all sound devices must depend on CONFIG_SOUND   Simon Glass
  • [PATCH 1/1] sound: all sound devices must depend on CONFIG_SOUND   Tom Rini
• [PATCH 1/3] fit: support signing with only an engine_id   Simon Glass
  • [PATCH 1/3] fit: support signing with only an engine_id   Wolfgang Wallner
• [PATCH 2/3] tools: binman: mkimage: add support for passing the engine   Simon Glass
  • [PATCH 2/3] tools: binman: mkimage: add support for passing the engine   Quentin Schulz
    • [PATCH 2/3] tools: binman: mkimage: add support for passing the engine   Tom Rini
      • [PATCH 2/3] tools: binman: mkimage: add support for passing the engine   Quentin Schulz
    • [PATCH 2/3] tools: binman: mkimage: add support for passing the engine   Simon Glass
  • [PATCH 2/3] tools: binman: mkimage: add support for passing the engine   Wolfgang Wallner
• [PATCH 3/3] tools: binman: fit: add support for OpenSSL engines   Simon Glass
  • [PATCH 3/3] tools: binman: fit: add support for OpenSSL engines   Peter Robinson
    • [PATCH 3/3] tools: binman: fit: add support for OpenSSL engines   Quentin Schulz
    • [PATCH 3/3] tools: binman: fit: add support for OpenSSL engines   Wolfgang Wallner
      • [PATCH 3/3] tools: binman: fit: add support for OpenSSL engines   Peter Robinson
      • [PATCH 3/3] tools: binman: fit: add support for OpenSSL engines   Tom Rini
      • [PATCH 3/3] tools: binman: fit: add support for OpenSSL engines   Quentin Schulz
  • [PATCH 3/3] tools: binman: fit: add support for OpenSSL engines   Wolfgang Wallner
• [PATCH 1/2] distro_bootcmd: Add support for customizable find_distro_rootpart   Simon Glass
  • [PATCH 1/2] distro_bootcmd: Add support for customizable find_distro_rootpart   Kory Maincent
    • [PATCH 1/2] distro_bootcmd: Add support for customizable find_distro_rootpart   Kory Maincent
      • [PATCH 1/2] distro_bootcmd: Add support for customizable find_distro_rootpart   Tom Rini
      • [PATCH 1/2] distro_bootcmd: Add support for customizable find_distro_rootpart   Kory Maincent
      • [PATCH 1/2] distro_bootcmd: Add support for customizable find_distro_rootpart   Tom Rini
      • [PATCH 1/2] distro_bootcmd: Add support for customizable find_distro_rootpart   Kory Maincent
      • [PATCH 1/2] distro_bootcmd: Add support for customizable find_distro_rootpart   Tom Rini
      • [PATCH 1/2] distro_bootcmd: Add support for customizable find_distro_rootpart   Kory Maincent
      • [PATCH 1/2] distro_bootcmd: Add support for customizable find_distro_rootpart   Simon Glass
      • [PATCH 1/2] distro_bootcmd: Add support for customizable find_distro_rootpart   Tom Rini
      • [PATCH 1/2] distro_bootcmd: Add support for customizable find_distro_rootpart   Simon Glass
• [PATCH] dm: Remove pre-schema tag support   Tom Rini
  • [PATCH] dm: Remove pre-schema tag support   Tom Rini
• [PATCH] ARM: imx: Enable DFU SF on all i.MX6 DHSOM and include dfu_alt_info in env   Marek Vasut
• [PATCH 4/5] video: rockchip: Add bridge support for VOP   Chaoyi Chen
• [PATCH v1 1/3] ram: starfive: drop references to 16GB memory size   E Shattow
• [PATCH 1/6] arm: dts: k3-j7200: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
  • [PATCH 1/6] arm: dts: k3-j7200: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
• [PATCH v4] spl: Add support for Device Firmware Upgrade (DFU) over PCIe   Hrushikesh Salunke
  • [PATCH v4] spl: Add support for Device Firmware Upgrade (DFU) over PCIe   Mattijs Korpershoek
  • [PATCH v4] spl: Add support for Device Firmware Upgrade (DFU) over PCIe   Mattijs Korpershoek
• [PATCH v1] toradex: verdin-am62: sync rm-cfg with SDK 11.01.05.03 baseline   Anshul Dalal
  • [PATCH v1] toradex: verdin-am62: sync rm-cfg with SDK 11.01.05.03 baseline   Tom Rini
• [PATCH v2 0/7] ti: j7: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
  • [PATCH v2 1/7] arm: dts: k3-j7200: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
  • [PATCH v2 2/7] arm: dts: k3-j721s2: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
  • [PATCH v2 3/7] arm: dts: k3-am68: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
  • [PATCH v2 4/7] arm: dts: k3-j784s4: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
  • [PATCH v2 5/7] arm: dts: k3-am69: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
    • [PATCH v2 5/7] arm: dts: k3-am69: ddr: Update to v0.12.0 of DDR config tool   Franz Schnyder
      • [PATCH v2 5/7] arm: dts: k3-am69: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
      • [PATCH v2 5/7] arm: dts: k3-am69: ddr: Update to v0.12.0 of DDR config tool   Francesco Dolcini
      • [EXTERNAL] Re: [PATCH v2 5/7] arm: dts: k3-am69: ddr: Update to v0.12.0 of DDR config tool   Scholz, Kevin
      • [EXTERNAL] Re: [PATCH v2 5/7] arm: dts: k3-am69: ddr: Update to v0.12.0 of DDR config tool   Francesco Dolcini
  • [PATCH v2 6/7] arm: dts: k3-j742s2: ddr: Update to v0.12.0 of DDR config tool   Neha Malcom Francis
  • [PATCH v2 7/7] doc: ti: k3: Add section for DDR configuration   Neha Malcom Francis
    • [PATCH v2 7/7] doc: ti: k3: Add section for DDR configuration   Romain Naour
• [PATCH v2] arm64: imx8ulp: Split SRAM0 mapping to isolate the SCMI shared memory as non-cacheable   alice.guo at oss.nxp.com
  • [PATCH v2] arm64: imx8ulp: Split SRAM0 mapping to isolate the SCMI shared memory as non-cacheable   Marek Vasut
  • [PATCH v2] arm64: imx8ulp: Split SRAM0 mapping to isolate the SCMI shared memory as non-cacheable   Fabio Estevam
• [PATCH v4 00/13] am62: IO+DDR resume support   Anshul Dalal
  • [PATCH v4 00/13] am62: IO+DDR resume support   Tom Rini
    • [PATCH v4 00/13] am62: IO+DDR resume support   Markus Schneider-Pargmann
• [PATCH v2] firmware: scmi: Add clock v3.2 CONFIG_SET support   Peng Fan
  • [PATCH v2] firmware: scmi: Add clock v3.2 CONFIG_SET support   Marek Vasut
• [PATCH 1/1] acpi: use U-Boot ACPI vendor ID   Bin Meng
  • [PATCH 1/1] acpi: use U-Boot ACPI vendor ID   Tom Rini
• [DEBUG] rk3399-nanopi-neo4: SPL SD init may report -5 due to SD power-on timing   Quentin Schulz
  • [DEBUG] rk3399-nanopi-neo4: SPL SD init may report -5 due to SD power-on timing   Sune Brian
  • [DEBUG] rk3399-nanopi-neo4: SPL SD init may report -5 due to SD power-on timing   Sune Brian
    • [DEBUG] rk3399-nanopi-neo4: SPL SD init may report -5 due to SD power-on timing   Quentin Schulz
      • [DEBUG] rk3399-nanopi-neo4: SPL SD init may report -5 due to SD power-on timing   Sune Brian
• [PATCH 1/3] qfw/acpi: do not zero out XSDT address   Bin Meng
• [PATCH 2/3] test: provide test for 'acpi list' command   Bin Meng
  • [PATCH 2/3] test: provide test for 'acpi list' command   Ilias Apalodimas
• [PATCH] boot: bootmeth_android: Conditionally dependent on abootimg   Mattijs Korpershoek
  • [PATCH] boot: bootmeth_android: Conditionally dependent on abootimg   george chan
    • [PATCH] boot: bootmeth_android: Conditionally dependent on abootimg   Mattijs Korpershoek
• [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Patrice CHOTARD
  • [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Peng Fan (OSS)
• [PATCH v5 3/4] mach-snapdragon: fixup power-domains   Casey Connolly
  • [PATCH v5 3/4] mach-snapdragon: fixup power-domains   Neil Armstrong
• [PATCH v5 2/4] power-domain: Add QCOM RPMH Power Domain Driver Support   Casey Connolly
• Re: 回复: [EXT] Re: 回复: 回复: 回复: [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Patrick DELAUNAY
  • Re: 回复: [EXT] Re: 回复: 回复: 回复: [PATCH] firmware: scmi: Drop mmu_set_region_dcache_behaviour() misuse   Marek Vasut
• [PATCH] clk: Prevent SIGSEGV on debug   Patrick DELAUNAY
• [PATCH v2 1/2] disk/part.c: ensure strings in struct disk_partition are valid after successful get_info   Quentin Schulz
• [PATCH v2 2/2] cmd/part.c: implement "part name" subcommand   Quentin Schulz
  • [PATCH v2 2/2] cmd/part.c: implement "part name" subcommand   Rasmus Villemoes
    • [PATCH v2 2/2] cmd/part.c: implement "part name" subcommand   Quentin Schulz
• [PATCH v3] mtd: spinand: add support for FudanMicro FM25S01A   Tianling Shen
• [PATCH v5 00/20] Convert extension support to UCLASS and adds its support to boot flows   Tom Rini
• [PATCH v3 0/4] board: ti: am62x: Add EEPROM support and refactor board detection   Guillaume La Roque (TI.com)
  • [PATCH v3 1/4] board: ti: common: Add generic AM6x board detection functions   Guillaume La Roque (TI.com)
  • [PATCH v3 2/4] board: am62x: Add support for reading eeprom data   Guillaume La Roque (TI.com)
  • [PATCH v3 3/4] board: am64x: Use generic AM6x board detection functions   Guillaume La Roque (TI.com)
    • [REGRESSION]: Re: [PATCH v3 3/4] board: am64x: Use generic AM6x board detection functions   T Pratham
      • [REGRESSION]: Re: [PATCH v3 3/4] board: am64x: Use generic AM6x board detection functions   Guillaume La Roque
  • [PATCH v3 4/4] board: am65x: Use generic AM6x board detection function   Guillaume La Roque (TI.com)
  • [PATCH v3 0/4] board: ti: am62x: Add EEPROM support and refactor board detection   Tom Rini
• [PATCH v2 3/5] boot: android: Add bootconfig support   Guillaume La Roque
  • [PATCH v2 3/5] boot: android: Add bootconfig support   Mattijs Korpershoek
• [PATCH v2 0/2] Modern pinctrl for Exynos5250 devices   Lukas Timmermann
  • [PATCH v2 1/2] gpio: s5p_gpio: Add config option for s5p_gpio driver   Lukas Timmermann
  • [PATCH v2 2/2] pinctrl: exynos: Add exynos5250 driver   Lukas Timmermann
• [PATCH] firmware: ti_sci: Fix memory leaks in   Francois Berder
• [PATCH v10 0/2] Remove usage of CMD_BOOTx from SPL code   Tom Rini
• [PATCH v3 0/4] Allow falcon boot from A-core SPL on K3 devices   Tom Rini
  • [PATCH v3 0/4] Allow falcon boot from A-core SPL on K3 devices   Tom Rini
• [PATCH] Azure: Ensure we do a shallow git clone   Tom Rini
  • [PATCH] Azure: Ensure we do a shallow git clone   Tom Rini
• [PATCH v3] Add make feature support for SoCFPGA Handoff   Brian Sune
  • [PATCH v3] Add make feature support for SoCFPGA Handoff   Tom Rini
    • [PATCH v3] Add make feature support for SoCFPGA Handoff   Sune Brian
      • [PATCH v3] Add make feature support for SoCFPGA Handoff   Tom Rini
      • [PATCH v3] Add make feature support for SoCFPGA Handoff   Sune Brian
      • [PATCH v3] Add make feature support for SoCFPGA Handoff   Tom Rini
      • [PATCH v3] Add make feature support for SoCFPGA Handoff   Sune Brian
      • [PATCH v3] Add make feature support for SoCFPGA Handoff   Sune Brian
    • [PATCH v3] Add make feature support for SoCFPGA Handoff   Sune Brian
• [PATCH v3] firmware: scmi: Add clock v3.2 CONFIG_SET support   Marek Vasut
  • 回复: [PATCH v3] firmware: scmi: Add clock v3.2 CONFIG_SET support   Alice Guo (OSS)
    • Re: 回复: [PATCH v3] firmware: scmi: Add clock v3.2 CONFIG_SET support   Marek Vasut
• [PATCH v4] Add make feature support for SoCFPGA Handoff   Brian Sune
• [PATCH v5] Add make feature support for SoCFPGA Handoff   Brian Sune
• [PATCH v6] Add optimized Makefile support for SoCFPGA handoff   Brian Sune
  • [PATCH v6] Add optimized Makefile support for SoCFPGA handoff   Tom Rini
    • [PATCH v6] Add optimized Makefile support for SoCFPGA handoff   Sune Brian
      • [PATCH v6] Add optimized Makefile support for SoCFPGA handoff   Tom Rini
      • [PATCH v6] Add optimized Makefile support for SoCFPGA handoff   Sune Brian
      • [PATCH v6] Add optimized Makefile support for SoCFPGA handoff   Tom Rini
      • [PATCH v6] Add optimized Makefile support for SoCFPGA handoff   Sune Brian
      • [PATCH v6] Add optimized Makefile support for SoCFPGA handoff   Tom Rini
      • [PATCH v6] Add optimized Makefile support for SoCFPGA handoff   Sune Brian
    • [PATCH v6] Add optimized Makefile support for SoCFPGA handoff   Sune Brian
• [PATCH] arm64: dts: imx8mp: Add missing LED enumerators for DH electronics i.MX8M Plus DHCOM on PDK2   Marek Vasut
  • [PATCH] arm64: dts: imx8mp: Add missing LED enumerators for DH electronics i.MX8M Plus DHCOM on PDK2   Peng Fan
  • [PATCH] arm64: dts: imx8mp: Add missing LED enumerators for DH electronics i.MX8M Plus DHCOM on PDK2   Fabio Estevam
• [RESEND PATCH v5 0/5] Enable Firmware Handoff CI test on qemu_arm64   Raymond Mao
  • [RESEND PATCH v5 0/5] Enable Firmware Handoff CI test on qemu_arm64   Tom Rini
  • [RESEND PATCH v5 0/5] Enable Firmware Handoff CI test on qemu_arm64   Tom Rini
• [PATCH v2] i2c: samsung: add support for Exynos7 HS-I2C   Kaustabh Chakraborty
  • [PATCH v2] i2c: samsung: add support for Exynos7 HS-I2C   Heiko Schocher
• How to regenerate lpddr4_timing.c when porting from U-Boot 2023.04 to 2025.04 (i.MX8MQ)   sudarsan n
• [PATCH 1/4] clk: scmi: Bulk allocate all sub-driver instance data   Peng Fan
  • [PATCH 1/4] clk: scmi: Bulk allocate all sub-driver instance data   Marek Vasut
  • [PATCH 1/4] clk: scmi: Bulk allocate all sub-driver instance data   Tom Rini
    • [PATCH 1/4] clk: scmi: Bulk allocate all sub-driver instance data   Peng Fan
      • [PATCH 1/4] clk: scmi: Bulk allocate all sub-driver instance data   Marek Vasut
      • [PATCH 1/4] clk: scmi: Bulk allocate all sub-driver instance data   Peng Fan
  • [PATCH 1/4] clk: scmi: Bulk allocate all sub-driver instance data   Marek Vasut
  • [PATCH 1/4] clk: scmi: Bulk allocate all sub-driver instance data   Peng Fan
• [PATCH] mmc: Fix missing 1 ms delay after mmc power up   Peng Fan
  • AW: [PATCH] mmc: Fix missing 1 ms delay after mmc power up   Christoph Stoidner
    • AW: [PATCH] mmc: Fix missing 1 ms delay after mmc power up   Peng Fan
      • AW: [PATCH] mmc: Fix missing 1 ms delay after mmc power up   Christoph Stoidner
  • AW: [PATCH] mmc: Fix missing 1 ms delay after mmc power up   E Shattow
• [PATCH v1 00/11] stm32mp1: Update led management for stm32mp1 boards   Patrice CHOTARD
• [PATCH 0/5] stm32mp2: Update led management for stm32mp2 boards   Patrice CHOTARD
• [PATCH] efi: video: fix mode info in payload mode   Heinrich Schuchardt
  • [PATCH] efi: video: fix mode info in payload mode   Ben Wolsieffer
• Please pull u-boot-tegra staging   Svyatoslav Ryhel
  • Please pull u-boot-tegra staging   Tom Rini
• [PATCH] qfw: Fix segfault from uninitialized variables in sandbox   Kory Maincent
  • [PATCH] qfw: Fix segfault from uninitialized variables in sandbox   Tom Rini
• [PATCH v4 00/12] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Peng Fan
  • [PATCH v4 01/12] remoteproc: Extend device_to_virt with a is_iomem parameter   Peng Fan
  • [PATCH v4 02/12] remoteproc: Add imx_rproc driver to support NXP i.MX8MP/N   Peng Fan
  • [PATCH v4 03/12] remoteproc: imx_rproc: Support i.MX8MQ/M   Peng Fan
  • [PATCH v4 04/12] remoteproc: imx_rproc: Add support for i.MX93 CM33   Peng Fan
  • [PATCH v4 05/12] arm: dts: imx8m: Add remoteproc node   Peng Fan
  • [PATCH v4 06/12] imx8mp: Enable remoteproc for i.MX8MP EVK   Peng Fan
  • [PATCH v4 07/12] imx8mm: Enable remoteproc for i.MX8MM EVK   Peng Fan
  • [PATCH v4 08/12] imx8mn: Enable remoteproc for i.MX8MN EVK   Peng Fan
  • [PATCH v4 09/12] imx8mq: Enable remoteproc for i.MX8MQ EVK   Peng Fan
  • [PATCH v4 10/12] imx93: Enable remoteproc for i.MX93-EVK/QSB/FRDM   Peng Fan
  • [PATCH v4 11/12] doc: board: nxp: Add remoteproc guide   Peng Fan
  • [PATCH v4 12/12] doc: cmd: Document remoteproc usage   Peng Fan
  • [PATCH v4 00/12] remoteproc: Add support for i.MX8M[M/N/P/Q] and i.MX93   Fabio Estevam
• [PATCH] doc: bootstd: Remove extension support from TODO list   Kory Maincent
  • [PATCH] doc: bootstd: Remove extension support from TODO list   Heinrich Schuchardt
• [PATCH 1/2] imx: kontron-sl-mx8mm: Adjust offset for U-Boot proper in case of eMMC fastboot   Frieder Schrempf
  • [PATCH 2/2] imx: kontron-sl-mx8mm: Implement spl_board_loader_name()   Frieder Schrempf
  • [PATCH 1/2] imx: kontron-sl-mx8mm: Adjust offset for U-Boot proper in case of eMMC fastboot   Fabio Estevam
• [PATCH] arm: armv8: mmu: fix mem_map_from_dram_banks   Emanuele Ghidoli
  • [PATCH] arm: armv8: mmu: fix mem_map_from_dram_banks   Tom Rini
• [PATCH] gpio: OMAP: add dependency to TI_SYSC   yegorslists at googlemail.com
  • [PATCH] gpio: OMAP: add dependency to TI_SYSC   Tom Rini
• [PATCH] doc: bootstd: Describe the optional extension_overlay_addr environment   Kory Maincent
  • [PATCH] doc: bootstd: Describe the optional extension_overlay_addr environment   Heinrich Schuchardt
    • [PATCH] doc: bootstd: Describe the optional extension_overlay_addr environment   Kory Maincent
    • [PATCH] doc: bootstd: Describe the optional extension_overlay_addr environment   Tom Rini
• [PATCH 1/1] efi_loader: correct struct efi_priv description   Heinrich Schuchardt
  • [PATCH 1/1] efi_loader: correct struct efi_priv description   Bin Meng
  • [PATCH 1/1] efi_loader: correct struct efi_priv description   Ilias Apalodimas
• [PATCH 1/1] efi: Use struct efi_gop_mode_info in struct efi_entry_gopmode   Heinrich Schuchardt
  • [PATCH 1/1] efi: Use struct efi_gop_mode_info in struct efi_entry_gopmode   Bin Meng
• [PATCH v4 0/2] Add compatibility for scmi clock protocol version 3.0   Kamlesh Gurudasani
  • [PATCH v4 1/2] clk: scmi: fix set_parent support when CCF is not being used   Kamlesh Gurudasani
    • [PATCH v4 1/2] clk: scmi: fix set_parent support when CCF is not being used   Peng Fan
    • [PATCH v4 1/2] clk: scmi: fix set_parent support when CCF is not being used   Peng Fan
• [PATCH v4 2/2] clk: scmi: add compatibility for clock version 3.0 and onwards   Kamlesh Gurudasani
  • [PATCH v4 2/2] clk: scmi: add compatibility for clock version 3.0 and onwards   Peng Fan
  • [PATCH v4 2/2] clk: scmi: add compatibility for clock version 3.0 and onwards   Maxim Kochetkov
• [PATCH v4 0/3] Harmonize image size checks   Philip Oberfichtner
  • [PATCH v4 0/3] Harmonize image size checks   Marek Vasut
• [PATCH v3 3/3] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2D board   Fabio Estevam
• [PATCH] mach-k3: Kconfig: fix NR_DRAM_BANKS for AM62x and AM64x   Anshul Dalal
  • [PATCH] mach-k3: Kconfig: fix NR_DRAM_BANKS for AM62x and AM64x   Bryan Brattlof
• [PATCH 0/4] imx: kontron: Add support for HW UIDs in OTPs   Frieder Schrempf
  • [PATCH 1/4] imx: kontron-sl-mx6ul: Enable CONFIG_BOARD_LATE_INIT to fix auto fastboot   Frieder Schrempf
  • [PATCH 2/4] imx: kontron: Add common function to get HW UIDs from OTPs   Frieder Schrempf
  • [PATCH 3/4] imx: kontron-sl-mx6ul: Add support for reading HW UIDs   Frieder Schrempf
  • [PATCH 4/4] imx: kontron-sl-mx8mm: Add support for reading HW UIDs   Frieder Schrempf
  • [PATCH 0/4] imx: kontron: Add support for HW UIDs in OTPs   Fabio Estevam
• [PATCH] board: xilinx: Update ESRT after copying GUID   Padmarao Begari
  • [PATCH] board: xilinx: Update ESRT after copying GUID   Michal Simek
• [PULL] u-boot-usb/master   Marek Vasut
  • [PULL] u-boot-usb/master   Tom Rini
  • [PULL] u-boot-usb/master   Marek Vasut
    • [PULL] u-boot-usb/master   Tom Rini
  • [PULL] u-boot-usb/master   Marek Vasut
    • [PULL] u-boot-usb/master   Tom Rini
• [PATCH] video: simplefb: Add stride handling   Igor Belwon
• [PATCH] armv8: Fix transfer list passing with KVM   Ilias Apalodimas
  • [PATCH] armv8: Fix transfer list passing with KVM   Raymond Mao
  • [PATCH] armv8: Fix transfer list passing with KVM   Tom Rini
    • [PATCH] armv8: Fix transfer list passing with KVM   Ilias Apalodimas
• [PATCH v2 1/3] imx95_evk: Share the env file for both 19x19 EVK and 15x15 EVK   Ye Li
  • [PATCH v2 2/3] arm: dts: imx95-15x15-evk: Add -u-boot.dtsi for SPL and binman   Ye Li
  • [PATCH v2 3/3] imx95_evk: Add basic support for iMX95 15x15 EVK   Ye Li
• [PATCH 0/3] Add i.MX95 15x15 EVK support   Ye Li
• [PATCH v2 0/3] mach-k3: Rework spl/get_boot_device()   Wadim Egorov
  • [PATCH v2 1/3] arm: mach-k3: Rework spl/get_boot_device()   Wadim Egorov
    • [PATCH v2 1/3] arm: mach-k3: Rework spl/get_boot_device()   Andrew Davis
      • [PATCH v2 1/3] arm: mach-k3: Rework spl/get_boot_device()   Wadim Egorov
  • [PATCH v2 2/3] arm: mach-k3: am62ax: Switch to boot-device helper   Wadim Egorov
  • [PATCH v2 3/3] arm: mach-k3: am64x: Switch to boot-device helper   Wadim Egorov
• [PATCH] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   adriana
  • [PATCH] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Tom Rini
  • [PATCH] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Ilias Apalodimas
• [PATCH] nand: denali: enable ONFI detection for SoCFPGA SoC64   dinesh.maniyam at altera.com
  • [PATCH] nand: denali: enable ONFI detection for SoCFPGA SoC64   Chee, Tien Fong
• [PATCH] nand: denali: enable SoC64 SPL NAND boot with proper Kconfig selection   dinesh.maniyam at altera.com
  • [PATCH] nand: denali: enable SoC64 SPL NAND boot with proper Kconfig selection   Chee, Tien Fong
    • [PATCH] nand: denali: enable SoC64 SPL NAND boot with proper Kconfig selection   Maniyam, Dinesh
• [PATCH v3 0/3] reenable dm_gpio tests, add support for gpio-line-names lookup   Rasmus Villemoes
  • [PATCH v3 1/3] test: gpio: include in build, and fixup bitrot   Rasmus Villemoes
    • [PATCH v3 1/3] test: gpio: include in build, and fixup bitrot   Heiko Schocher
  • [PATCH v3 2/3] gpio: search gpio-line-names property in dm_gpio_lookup_name   Rasmus Villemoes
    • [PATCH v3 2/3] gpio: search gpio-line-names property in dm_gpio_lookup_name   Heiko Schocher
  • [PATCH v3 3/3] test: gpio: add test for gpio-line-names lookup   Rasmus Villemoes
    • [PATCH v3 3/3] test: gpio: add test for gpio-line-names lookup   Heiko Schocher
  • [PATCH v3 0/3] reenable dm_gpio tests, add support for gpio-line-names lookup   Tom Rini
  • [PATCH v3 0/3] reenable dm_gpio tests, add support for gpio-line-names lookup   Tom Rini
• [GIT PULL] Please pull u-boot-imx-master-20251104   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-master-20251104   Tom Rini
• [PATCH v4 00/10] Enable USB and ENETC on i.MX943 EVK   Fabio Estevam
• [PATCH v3 1/3] bsh: update readme with instructions to build M2B   Fabio Estevam
  • [PATCH v3 1/3] bsh: update readme with instructions to build M2B   Andrea Calabrese
• [PATCH v1] configs: toradex-smarc-imx95: enable USB Gadget OS Descriptors for fastboot   Fabio Estevam
• [PATCH 1/3] imx95_evk: Share the env file for both 19x19 EVK and 15x15 EVK   Fabio Estevam
  • [PATCH 1/3] imx95_evk: Share the env file for both 19x19 EVK and 15x15 EVK   Fabio Estevam
• [PATCH 1/2] CI: Move to Ubuntu 'Jammy' 20251001 tag   Tom Rini
  • [PATCH 2/2] Gitlab: Drop vexpress_fvp from tests   Tom Rini
  • [PATCH 1/2] CI: Move to Ubuntu 'Jammy' 20251001 tag   Tom Rini
• [PATCH 0/2] Add Radxa ROCK 5B+ defconfig   Bryan Hinton
  • [PATCH 1/2] configs: Add rock5b_plus-rk3588_defconfig   Bryan Hinton
  • [PATCH 2/2] MAINTAINERS: Add entry for Radxa ROCK 5B+   Bryan Hinton
  • [PATCH 0/2] Add Radxa ROCK 5B+ defconfig   Jonas Karlman
    • [PATCH 0/2] Add Radxa ROCK 5B+ defconfig   Bryan Hinton
      • [PATCH 0/2] Add Radxa ROCK 5B+ defconfig   Jonas Karlman
      • [PATCH 0/2] Add Radxa ROCK 5B+ defconfig   Bryan Hinton
• [PATCH 1/2] configs: Add rock5b_plus-rk3588_defconfig   Tom Rini
• [PATCH 1/1] Dockerfile: remove Python 2.7   Tom Rini
• [PATCH v2 0/2] Add Radxa ROCK 5B+ defconfig   Bryan Hinton
  • [PATCH v2 1/2] configs: Add rock5b_plus-rk3588_defconfig   Bryan Hinton
  • [PATCH v2 2/2] MAINTAINERS: Add entry for Radxa ROCK 5B+   Bryan Hinton
• [PATCH 1/1] efi_selftest: use Sphinx style comments in efi_console.c   Heinrich Schuchardt
  • [PATCH 1/1] efi_selftest: use Sphinx style comments in efi_console.c   Ilias Apalodimas
• [PATCH 1/1] efi_loader: typo 'mange' in efi_net.c   Heinrich Schuchardt
  • [PATCH 1/1] efi_loader: typo 'mange' in efi_net.c   Ilias Apalodimas
• [PATCH 1/1] efi_loader: typo 'eventfor' in efi_ipconfig.c   Heinrich Schuchardt
• [u-boot-test-hooks][PATCH 1/2] labgrid: rpi: Rework the writer to be more robust   Tom Rini
  • [u-boot-test-hooks][PATCH 2/2] labgrid: imx: Add a writer using write-image   Tom Rini
  • [u-boot-test-hooks][PATCH 1/2] labgrid: rpi: Rework the writer to be more robust   Tom Rini
• [PATCH 1/1] efi_client: don't include asm/global_data.h twice   Heinrich Schuchardt
  • [PATCH 1/1] efi_client: don't include asm/global_data.h twice   Ilias Apalodimas
• [PATCH 1/1] efi_client: correct memset() return value   Heinrich Schuchardt
• [v2,0/2] rockchip: Add support for ROCK 5B+   bryan at bryanhinton.com
• [PATCH 1/1] efi_client: efi_store_memory_map() must return int   Heinrich Schuchardt
  • [PATCH 1/1] efi_client: efi_store_memory_map() must return int   Ilias Apalodimas
• [PATCH v7] Add optimized Makefile support for SoCFPGA handoff   Brian Sune
  • [PATCH v7] Add optimized Makefile support for SoCFPGA handoff   Sune Brian
  • [PATCH v7] Add optimized Makefile support for SoCFPGA handoff   Chee, Tien Fong
    • [PATCH v7] Add optimized Makefile support for SoCFPGA handoff   Sune Brian
    • [PATCH v7] Add optimized Makefile support for SoCFPGA handoff   Sune Brian
      • [PATCH v7] Add optimized Makefile support for SoCFPGA handoff   Chee, Tien Fong
      • [PATCH v7] Add optimized Makefile support for SoCFPGA handoff   Sune Brian
      • [PATCH v7] Add optimized Makefile support for SoCFPGA handoff   Chee, Tien Fong
• [PATCH 1/1] block: type 'to be write'   Heinrich Schuchardt
  • [PATCH 1/1] block: type 'to be write'   Bin Meng
• [PATCH 1/1] efi_driver: typo 'to be write'   Heinrich Schuchardt
  • [PATCH 1/1] efi_driver: typo 'to be write'   Bin Meng
• [PATCH 1/1] sound: typos 'to be write', 'writen'   Heinrich Schuchardt
  • [PATCH 1/1] sound: typos 'to be write', 'writen'   Tom Rini
• [PATCH 1/1] efi_driver: don't leak name in efi_bl_create_block_device()   Heinrich Schuchardt
  • [PATCH 1/1] efi_driver: don't leak name in efi_bl_create_block_device()   Bin Meng
    • [PATCH 1/1] efi_driver: don't leak name in efi_bl_create_block_device()   Heinrich Schuchardt
• [PATCH 1/1] efi_driver: correct formatting in efi_uc_stop()   Heinrich Schuchardt
  • [PATCH 1/1] efi_driver: correct formatting in efi_uc_stop()   Bin Meng
  • [PATCH 1/1] efi_driver: correct formatting in efi_uc_stop()   Ilias Apalodimas
• [PATCH 1/1] virtio: typo complaint   Heinrich Schuchardt
  • [PATCH 1/1] virtio: typo complaint   Bin Meng
  • [PATCH 1/1] virtio: typo complaint   Tom Rini
• [PATCH 1/1] virtio: typo 'private date'   Heinrich Schuchardt
  • [PATCH 1/1] virtio: typo 'private date'   Bin Meng
  • [PATCH 1/1] virtio: typo 'private date'   Tom Rini
• [PATCH 1/1] usb: typos 'requird', 'current'   Heinrich Schuchardt
  • [PATCH 1/1] usb: typos 'requird', 'current'   Bin Meng
  • [PATCH 1/1] usb: typos 'requird', 'current'   Marek Vasut
• [PATCH 1/1] spl: mmc: avoid including errno.h twice   Heinrich Schuchardt
  • [PATCH 1/1] spl: mmc: avoid including errno.h twice   Bin Meng
  • [PATCH 1/1] spl: mmc: avoid including errno.h twice   Peng Fan (OSS)
• [PATCH 1/1] spl: nand: typo 'destintion'   Heinrich Schuchardt
  • [PATCH 1/1] spl: nand: typo 'destintion'   Bin Meng
• [PATCH v2] block: typo 'to be write'   Heinrich Schuchardt
  • [PATCH v2] block: typo 'to be write'   Bin Meng
  • [PATCH v2] block: typo 'to be write'   Tom Rini
• [PATCH v2] efi_driver: typo 'to be write'   Heinrich Schuchardt
  • [PATCH v2] efi_driver: typo 'to be write'   Bin Meng
  • [PATCH v2] efi_driver: typo 'to be write'   Ilias Apalodimas
• [PATCH v4] firmware: scmi: Add clock v3.2 CONFIG_SET support   Marek Vasut
  • 回复: [PATCH v4] firmware: scmi: Add clock v3.2 CONFIG_SET support   Alice Guo (OSS)
  • [PATCH v4] firmware: scmi: Add clock v3.2 CONFIG_SET support   Peng Fan (OSS)
• [PATCH] configs: am65x_usbdfu: add SPL_USE_TINY_PRINTF_POINTER_SUPPORT   Anshul Dalal
  • [PATCH] configs: am65x_usbdfu: add SPL_USE_TINY_PRINTF_POINTER_SUPPORT   Anshul Dalal
    • [PATCH] configs: am65x_usbdfu: add SPL_USE_TINY_PRINTF_POINTER_SUPPORT   Tom Rini
• [PATCH v4 3/3] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2D board   Andrea Calabrese
  • [PATCH v4 3/3] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2D board   Fabio Estevam
    • [PATCH v4 3/3] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2D board   Andrea Calabrese
• [PATCH] kconfig: Add support for out-of-tree config fragment and defconfig   Neha Malcom Francis
  • [PATCH] kconfig: Add support for out-of-tree config fragment and defconfig   Quentin Schulz
  • [PATCH] kconfig: Add support for out-of-tree config fragment and defconfig   Tom Rini
    • [PATCH] kconfig: Add support for out-of-tree config fragment and defconfig   Ryan Eatmon
      • [PATCH] kconfig: Add support for out-of-tree config fragment and defconfig   Tom Rini
      • [PATCH] kconfig: Add support for out-of-tree config fragment and defconfig   Ryan Eatmon
      • [PATCH] kconfig: Add support for out-of-tree config fragment and defconfig   Tom Rini
• [PATCH] scsi: Fix the name string memory leak during scsi scan   Bin Meng
  • [PATCH] scsi: Fix the name string memory leak during scsi scan   Heinrich Schuchardt
  • [PATCH] scsi: Fix the name string memory leak during scsi scan   Tom Rini
• [PATCH v1] sync doc/README.socfpga with new info   Brian Sune
  • [PATCH v1] sync doc/README.socfpga with new info   Tom Rini
    • [PATCH v1] sync doc/README.socfpga with new info   Sune Brian
    • [PATCH v1] sync doc/README.socfpga with new info   Sune Brian
• [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Aristo Chen
• [PATCH v2 1/1] efi_driver: don't leak name in efi_bl_create_block_device()   Heinrich Schuchardt
  • [PATCH v2 1/1] efi_driver: don't leak name in efi_bl_create_block_device()   Bin Meng
    • [PATCH v2 1/1] efi_driver: don't leak name in efi_bl_create_block_device()   Ilias Apalodimas
• [PATCH v5 3/3] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2D board   Fabio Estevam
  • [PATCH v5 3/3] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2D board   Andrea Calabrese
  • [PATCH v5 3/3] bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2D board   Andrea Calabrese
• [PATCH v3 0/2] Refactor tidss_drv and enable early splash on AM625   swamiljain
  • [PATCH v3 1/2] drivers: video: tidss: Refactor tidss_drv   swamiljain
  • [PATCH v3 2/2] configs: am62x_evm_a53_defconfig: Enable A53 splashscreen at u-boot SPL   swamiljain
  • [PATCH v3 0/2] Refactor tidss_drv and enable early splash on AM625   Swamil Jain
• [PATCH v2] configs: am65x_usbdfu: add SPL_USE_TINY_PRINTF_POINTER_SUPPORT   Anshul Dalal
  • [PATCH v2] configs: am65x_usbdfu: add SPL_USE_TINY_PRINTF_POINTER_SUPPORT   Andrew Davis
• [RESEND PATCH v3 0/2] Refactor tidss_drv and enable early splash on AM625   Swamil Jain
  • [RESEND PATCH v3 1/2] drivers: video: tidss: Refactor tidss_drv   Swamil Jain
    • [RESEND PATCH v3 1/2] drivers: video: tidss: Refactor tidss_drv   Tom Rini
      • [RESEND PATCH v3 1/2] drivers: video: tidss: Refactor tidss_drv   Swamil Jain
  • [RESEND PATCH v3 2/2] configs: am62x_evm_a53_defconfig: Enable A53 splashscreen at u-boot SPL   Swamil Jain
    • [RESEND PATCH v3 2/2] configs: am62x_evm_a53_defconfig: Enable A53 splashscreen at u-boot SPL   Andrew Davis
      • [RESEND PATCH v3 2/2] configs: am62x_evm_a53_defconfig: Enable A53 splashscreen at u-boot SPL   Swamil Jain
• [RESEND PATCH 0/4] Improve RaspBerry Pi 5 support part1: Fixes   Torsten Duwe
  • [RESEND PATCH 1/4] macb: wrap asm/arch/clk.h with ifndef CLK   Torsten Duwe
    • [RESEND PATCH 1/4] macb: wrap asm/arch/clk.h with ifndef CLK   Matthias Brugger
  • [RESEND PATCH 2/4] pci-uclass: respect ofnode_read_pci_vendev retval   Torsten Duwe
    • [RESEND PATCH 2/4] pci-uclass: respect ofnode_read_pci_vendev retval   Matthias Brugger
    • [RESEND PATCH 2/4] pci-uclass: respect ofnode_read_pci_vendev retval   Torsten Duwe
  • [RESEND PATCH 3/4] Fix #cells lookup in of_get_dma_range   Torsten Duwe
    • [RESEND PATCH 3/4] Fix #cells lookup in of_get_dma_range   Peter Robinson
  • [RESEND PATCH 4/4] pcie_brcmstb: use bus_base for PCI config devices   Torsten Duwe
  • [RESEND PATCH 0/4] Improve RaspBerry Pi 5 support part1: Fixes   Peter Robinson
• [PATCH] test: do not write to 0x0 except on sandbox   Heinrich Schuchardt
  • [PATCH] test: do not write to 0x0 except on sandbox   Tom Rini
  • [PATCH] test: do not write to 0x0 except on sandbox   Tom Rini
    • [PATCH] test: do not write to 0x0 except on sandbox   Tom Rini
      • [PATCH] test: do not write to 0x0 except on sandbox   Heinrich Schuchardt
      • [PATCH] test: do not write to 0x0 except on sandbox   Tom Rini
      • [PATCH] test: do not write to 0x0 except on sandbox   Simon Glass
      • [PATCH] test: do not write to 0x0 except on sandbox   Simon Glass
      • [PATCH] test: do not write to 0x0 except on sandbox   Tom Rini
• [PATCH v2 5/5] test: abootimg: Add test for bootconfig handling   Guillaume La Roque
  • [PATCH v2 5/5] test: abootimg: Add test for bootconfig handling   Mattijs Korpershoek
• [PATCH 1/1] test: fdt_test_apply requires CONFIG_OF_LIBFDT_OVERLAY   Heinrich Schuchardt
• [PATCH 0/2] j721s2: j784s4: Add workaround for errata i2437   Neha Malcom Francis
• [PATCH 1/2] arch: mach-k3: j721s2_init: Add workaround for errata i2437   Neha Malcom Francis
  • [PATCH 1/2] arch: mach-k3: j721s2_init: Add workaround for errata i2437   Kumar, Udit
• [PATCH 2/2] arch: mach-k3: j784s4_init: Add workaround for errata i2437   Neha Malcom Francis
• [PATCH 1/2] bsh: make common configuration for m2   Andrea Calabrese
  • [PATCH 2/2] bsh: add support for imx6ulz_smm_m2d   Andrea Calabrese
• [PATCH] doc: board: starfive: update jh7110 common description   Hal Feng
  • [PATCH] doc: board: starfive: update jh7110 common description   Heinrich Schuchardt
  • [PATCH] doc: board: starfive: update jh7110 common description   E Shattow
• [PATCH v4 0/2] Refactor tidss_drv and enable early splash on AM625   Swamil Jain
  • [PATCH v4 1/2] drivers: video: tidss: Refactor tidss_drv   Swamil Jain
  • [PATCH v4 2/2] configs: am62x_evm_a53_defconfig: Enable A53 splashscreen at u-boot SPL   Swamil Jain
  • [PATCH v4 0/2] Refactor tidss_drv and enable early splash on AM625   Anshul Dalal
    • [PATCH v4 0/2] Refactor tidss_drv and enable early splash on AM625   Tom Rini
      • [PATCH v4 0/2] Refactor tidss_drv and enable early splash on AM625   Swamil Jain
      • [PATCH v4 0/2] Refactor tidss_drv and enable early splash on AM625   Tom Rini
      • [PATCH v4 0/2] Refactor tidss_drv and enable early splash on AM625   Swamil Jain
• [PATCH] bootstd: android: add the bootargs env to the commandline   Mattijs Korpershoek
• [PATCH] arm: dts: rockchip: Fix eMMC write on RK3528   Tianling Shen
• [PATCH RESEND] mtd: spi-nor-ids: Add support for AT25SF321B and AT25SF641B   Zixun LI
• [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Emanuele Ghidoli
  • [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Fabio Estevam
    • [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Ye Li
      • [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Emanuele Ghidoli
      • [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Michael Nazzareno Trimarchi
      • [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Ye Li
      • [PATCH] imx: Revert "imx: mx6ull: fix REFTOP_VBGADJ setting" and fix comments   Ye Li
• Build for RISC-V with LLVM   Yao Zi
  • Build for RISC-V with LLVM   Nathaniel Hourt
  • Build for RISC-V with LLVM   Nathaniel Hourt
• [PATCH] mach-snapdragon: enable MMU_PGPROT by default   Neil Armstrong
  • [PATCH] mach-snapdragon: enable MMU_PGPROT by default   Ilias Apalodimas
• [PATCH 0/2] mtd: rawnand: atmel: Fix ECC error on SAM9   Zixun LI
  • [PATCH 1/2] mtd: rawnand: atmel: set pmecc data setup time   Zixun LI
    • [PATCH 1/2] mtd: rawnand: atmel: set pmecc data setup time   Eugen Hristev
      • [PATCH 1/2] mtd: rawnand: atmel: set pmecc data setup time   Alexander Dahl
      • [PATCH 1/2] mtd: rawnand: atmel: set pmecc data setup time   Zixun LI
      • [PATCH 1/2] mtd: rawnand: atmel: set pmecc data setup time   Eugen Hristev
  • [PATCH 2/2] mtd: rawnand: atmel: Remove timing from atmel_pmecc struct   Zixun LI
    • [PATCH 2/2] mtd: rawnand: atmel: Remove timing from atmel_pmecc struct   Alexander Dahl
    • [PATCH 2/2] mtd: rawnand: atmel: Remove timing from atmel_pmecc struct   Eugen Hristev
      • [PATCH 2/2] mtd: rawnand: atmel: Remove timing from atmel_pmecc struct   Michael Nazzareno Trimarchi
      • [PATCH 2/2] mtd: rawnand: atmel: Remove timing from atmel_pmecc struct   Alexander Dahl
  • [PATCH 0/2] mtd: rawnand: atmel: Fix ECC error on SAM9   Eugen Hristev
• [PATCH v1 4/6] mach-k3: security: Propagate verified image addr   Philippe Schenker
• [PATCH 1/2] qemu: arm: Rename QEMU arm* defconfig files   Bin Meng
  • [PATCH 2/2] qemu: arm: sbsa: Rename sbsa defconfig to arm64   Bin Meng
  • [PATCH 1/2] qemu: arm: Rename QEMU arm* defconfig files   Bin Meng
    • [PATCH 1/2] qemu: arm: Rename QEMU arm* defconfig files   Simon Glass
• [PATCH v3] armv8: implement workaround for broken CNTFRQ_EL0 value   Tom Rini
• [PATCH] gpio: Return -ENODEV if gpio_hog_lookup_name() is empty   Tom Rini
• [PATCH v2] common/spl: fix endless loop in spl_fit_append_fdt()   Tom Rini
• [PATCH] tools: key2dtsi: Write out modulus and r-squared with the correct length   Tom Rini
  • [PATCH] tools: key2dtsi: Write out modulus and r-squared with the correct length   Hans Gfirtner (Nokia)
• [PATCH] Invalidate cached FAT device upon boot error   Tom Rini
• [RFC PATCH] mtd: nand: raw: Add ONFI NAND unique id read support.   Zixun LI
  • [RFC PATCH] mtd: nand: raw: Add ONFI NAND unique id read support.   Eugen Hristev
    • [RFC PATCH] mtd: nand: raw: Add ONFI NAND unique id read support.   Michael Nazzareno Trimarchi
      • [RFC PATCH] mtd: nand: raw: Add ONFI NAND unique id read support.   Zixun LI
      • [RFC PATCH] mtd: nand: raw: Add ONFI NAND unique id read support.   Zixun LI
      • [RFC PATCH] mtd: nand: raw: Add ONFI NAND unique id read support.   Michael Nazzareno Trimarchi
• [PATCH] ARM: renesas: Disable CONFIG_ENV_OVERWRITE on all boards   Marek Vasut
• [PATCH v1 0/6] remoteproc: k3-r5: Build fixes and security improvements   Tom Rini
  • [PATCH v1 0/6] remoteproc: k3-r5: Build fixes and security improvements   Philippe Schenker
• [RFC][PATCH] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Marek Vasut
  • Fwd: [RFC][PATCH] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Heinrich Schuchardt
    • Fwd: [RFC][PATCH] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   E Shattow
  • [RFC][PATCH] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Heinrich Schuchardt
    • [RFC][PATCH] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Marek Vasut
      • [RFC][PATCH] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Tom Rini
      • [RFC][PATCH] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Marek Vasut
      • [RFC][PATCH] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Marek Vasut
      • [RFC][PATCH] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Tom Rini
      • [RFC][PATCH] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Marek Vasut
      • [RFC][PATCH] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Simon Glass
      • [RFC][PATCH] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Marek Vasut
      • [RFC][PATCH] kbuild: Produce diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Simon Glass
• [PATCH v4 1/2] ARM: bootm: Add support for starting Linux through OPTEE-OS on ARMv7a   Tom Rini
• [PATCH] Gitlab CI: Rework our tag usage again   Tom Rini
  • [PATCH] Gitlab CI: Rework our tag usage again   Simon Glass
    • [PATCH] Gitlab CI: Rework our tag usage again   Tom Rini
• [PULL] u-boot-sh/master   Marek Vasut
  • [PULL] u-boot-sh/master   Tom Rini
  • [PULL] u-boot-sh/master   Marek Vasut
    • [PULL] u-boot-sh/master   Tom Rini
  • [PULL] u-boot-sh/master   Marek Vasut
    • [PULL] u-boot-sh/master   Tom Rini
• [PATCH] Gitlab: Prefix more of the sjg lab with "sjg"   Tom Rini
  • [PATCH] Gitlab: Prefix more of the sjg lab with "sjg"   Simon Glass
  • [PATCH] Gitlab: Prefix more of the sjg lab with "sjg"   Tom Rini
  • [PATCH] Gitlab: Prefix more of the sjg lab with "sjg"   Tom Rini
• [PATCH] Gitlab: Optimize the job dependency list more   Tom Rini
  • [PATCH] Gitlab: Optimize the job dependency list more   Tom Rini
• [PATCH] buildman: Correct override toolchain support for clang   Tom Rini
  • [PATCH] buildman: Correct override toolchain support for clang   Simon Glass
    • [PATCH] buildman: Correct override toolchain support for clang   Tom Rini
• [PATCH] smbios: Fix warning when building with clang   Tom Rini
  • [PATCH] smbios: Fix warning when building with clang   Raymond Mao
  • [PATCH] smbios: Fix warning when building with clang   Ilias Apalodimas
  • [PATCH] smbios: Fix warning when building with clang   Tom Rini
• [PATCH] efi_selftest: efi_selftest_snp: Fix warning when building with clang   Tom Rini
  • [PATCH] efi_selftest: efi_selftest_snp: Fix warning when building with clang   Ilias Apalodimas
• [PATCH 0/6] mmc: exynos_dw_mmc: Disable FMP for Exynos850   Peng Fan (OSS)
• [PATCH v2 1/4] clk: scmi: Bulk allocate all sub-driver instance data   Marek Vasut
  • [PATCH v2 2/4] clk: scmi: Factor out clock control flags resolution   Marek Vasut
  • [PATCH v2 3/4] clk: scmi: Postpone clock name resolution   Marek Vasut
  • [PATCH v2 4/4] clk: scmi: Defer issue of SCMI_CLOCK_ATTRIBUTES   Marek Vasut
    • [PATCH v2 4/4] clk: scmi: Defer issue of SCMI_CLOCK_ATTRIBUTES   Peng Fan
      • [PATCH v2 4/4] clk: scmi: Defer issue of SCMI_CLOCK_ATTRIBUTES   Marek Vasut
      • [PATCH v2 4/4] clk: scmi: Defer issue of SCMI_CLOCK_ATTRIBUTES   Peng Fan
      • [PATCH v2 4/4] clk: scmi: Defer issue of SCMI_CLOCK_ATTRIBUTES   Marek Vasut
  • [PATCH v2 1/4] clk: scmi: Bulk allocate all sub-driver instance data   Peng Fan (OSS)
• [PATCH v2] firmware: scmi: Fix up code comments   Peng Fan (OSS)
• Pull request efi-2026-01-rc2   Heinrich Schuchardt
  • Pull request efi-2026-01-rc2   Tom Rini
• [PATCH] rockchip: rock5b-rk3588: Add support for Radxa ROCK 5T   FUKAUMI Naoki
  • [PATCH] rockchip: rock5b-rk3588: Add support for Radxa ROCK 5T   FUKAUMI Naoki
  • [PATCH] rockchip: rock5b-rk3588: Add support for Radxa ROCK 5T   Kever Yang
• [GIT PULL] please pull mmc-master-2025-11-07   Peng Fan
  • [GIT PULL] please pull mmc-master-2025-11-07   Tom Rini
• [PATCH v2 0/2] rockchip: Add support for ROCK 5B+   FUKAUMI Naoki
• [PATCH v1] board: toradex: add aquila am69 support   Francesco Dolcini
• [PATCH] i2c: muxes: i2c_mux_select/deselect() should be static   Michal Simek
  • [PATCH] i2c: muxes: i2c_mux_select/deselect() should be static   Heiko Schocher
  • [PATCH] i2c: muxes: i2c_mux_select/deselect() should be static   Heiko Schocher
• [PATCH] net: axi_emac: Fix compilation warnings   Michal Simek
  • [PATCH] net: axi_emac: Fix compilation warnings   Michal Simek
• [PATCH] clk: versal: Use __data macro for moving variable to data section   Michal Simek
  • [PATCH] clk: versal: Use __data macro for moving variable to data section   Michal Simek
• [PATCH 0/3] rockchip: i2c: fix illegal I2C format   Quentin Schulz
  • [PATCH 2/3] rockchip: i2c: move ACK comment where it applies   Quentin Schulz
    • [PATCH 2/3] rockchip: i2c: move ACK comment where it applies   Heiko Schocher
    • [PATCH 2/3] rockchip: i2c: move ACK comment where it applies   Kever Yang
  • [PATCH 3/3] rockchip: i2c: fix illegal I2C START/STOP condition   Quentin Schulz
    • [PATCH 3/3] rockchip: i2c: fix illegal I2C START/STOP condition   Heiko Schocher
    • [PATCH 3/3] rockchip: i2c: fix illegal I2C START/STOP condition   Kever Yang
• [PATCH 1/3] rockchip: i2c: fix incorrect STOP flag for the interrupt enable register   Quentin Schulz
  • [PATCH 1/3] rockchip: i2c: fix incorrect STOP flag for the interrupt enable register   Heiko Schocher
  • [PATCH 1/3] rockchip: i2c: fix incorrect STOP flag for the interrupt enable register   Kever Yang
    • [PATCH 1/3] rockchip: i2c: fix incorrect STOP flag for the interrupt enable register   Heiko Schocher
• [PATCH v2 0/6] remoteproc: k3-r5: Build fixes and security improvements   Philippe Schenker
  • [PATCH v2 1/6] arm: dts: k3-am642-evm: Remove duplicate node   Philippe Schenker
    • [PATCH v2 1/6] arm: dts: k3-am642-evm: Remove duplicate node   Anshul Dalal
  • [PATCH v2 2/6] remoteproc: k3-r5: cast size to size_t   Philippe Schenker
    • [PATCH v2 2/6] remoteproc: k3-r5: cast size to size_t   Andrew Davis
      • [PATCH v2 2/6] remoteproc: k3-r5: cast size to size_t   Philippe Schenker
      • [PATCH v2 2/6] remoteproc: k3-r5: cast size to size_t   Andrew Davis
  • [PATCH v2 3/6] soc: ti: pruss: Fix size ptr type in probe   Philippe Schenker
  • [PATCH v2 4/6] mach-k3: security: Propagate verified image addr   Philippe Schenker
  • [PATCH v2 5/6] remoteproc: k3-r5: Use verified image address   Philippe Schenker
  • [PATCH v2 6/6] remoteproc: k3-r5: Implement is_running operation   Philippe Schenker
• [GIT PULL] Please pull u-boot-dfu-20251107 into master   Mattijs Korpershoek
  • [GIT PULL] Please pull u-boot-dfu-20251107 into master   Tom Rini
• [PATCH] rsa: fix typo in $(PHASE_)RSA_VERIFY_WITH_PKEY help text   Tom Rini
• [PATCH] boot: specify SPL_FIT_FULL_CHECK applies to SPL   Tom Rini
• [PATCH] serial: make VPL_DM_SERIAL depend on VPL_DM   Tom Rini
• [PATCH] boot: fix typo in SYS_BOOTM_LEN description   Tom Rini
• [PATCH v10 0/7] Allow falcon boot from R5 SPL on TI's AM62 devices   Tom Rini
• [PATCH] spl: remove redundant prints in boot_from_devices   Tom Rini
• [PATCH v2 0/2] mtd: rawnand: atmel: Fix ECC error on SAM9   Zixun LI
  • [PATCH v2 2/2] mtd: rawnand: atmel: atmel_pmecc_create: Remove unused code   Zixun LI
    • [PATCH v2 2/2] mtd: rawnand: atmel: atmel_pmecc_create: Remove unused code   Alexander Dahl
      • [PATCH v2 2/2] mtd: rawnand: atmel: atmel_pmecc_create: Remove unused code   Eugen Hristev
  • [PATCH v2 0/2] mtd: rawnand: atmel: Fix ECC error on SAM9   Eugen Hristev
• [PATCH v2 1/2] mtd: rawnand: atmel: set pmecc data setup time   Zixun LI
  • [PATCH v2 1/2] mtd: rawnand: atmel: set pmecc data setup time   Alexander Dahl
    • [PATCH v2 1/2] mtd: rawnand: atmel: set pmecc data setup time   Eugen Hristev
  • [PATCH v2 1/2] mtd: rawnand: atmel: set pmecc data setup time   Alexander Dahl
• Binman creates a single image 4 times   Quentin Schulz
  • Binman creates a single image 4 times   Simon Glass
• [PATCH 1/5] pinctrl: renesas: r8a779g0: Remove AVB[01]_MII   Marek Vasut
  • [PATCH 2/5] pinctrl: renesas: r8a779g0: Remove CC5_OSCOUT   Marek Vasut
  • [PATCH 3/5] pinctrl: renesas: r8a779g0: Remove STPWT_EXTFXR   Marek Vasut
  • [PATCH 4/5] pinctrl: renesas: r8a779h0: Remove CC5_OSCOUT   Marek Vasut
  • [PATCH 5/5] pinctrl: renesas: r8a779h0: Remove STPWT_EXTFXR   Marek Vasut
• [PATCH] rockchip: mkimage: enhance comments for v1 header   Quentin Schulz
  • [PATCH] rockchip: mkimage: enhance comments for v1 header   Jonas Karlman
    • [PATCH] rockchip: mkimage: enhance comments for v1 header   Quentin Schulz
• [PATCH v2 0/3] Add PCIe boot support on TI AM64X SoC   Tom Rini
• [PATCH v2 0/2] 'part name' subcommand and some robustification   Tom Rini
  • [PATCH v2 0/2] 'part name' subcommand and some robustification   Rasmus Villemoes
    • [PATCH v2 0/2] 'part name' subcommand and some robustification   Tom Rini
      • [PATCH v2 0/2] 'part name' subcommand and some robustification   Rasmus Villemoes
• [PATCH v2 0/4] pwm: put symbols into a menu + use if DM_PWM block instead of depends on   Tom Rini
• [PATCH] test/py: multiplexed_log.py: Clean up and correct RunAndLog()   Tom Rini
• [PATCH] ext4: include missing blk.h   Tom Rini
• [PATCH] mach-snapdragon: capsule_update: Fix eMMC detection for non-UFS devices   Alexey Minnekhanov
  • [PATCH] mach-snapdragon: capsule_update: Fix eMMC detection for non-UFS devices   Casey Connolly
• [PATCH] board: nxp: Rename board directory from board/freescale to board/nxp   Marek Vasut
  • [PATCH] board: nxp: Rename board directory from board/freescale to board/nxp   alice.guo at oss.nxp.com
  • 回复: [PATCH] board: nxp: Rename board directory from board/freescale to board/nxp   Alice Guo (OSS)
    • Re: 回复: [PATCH] board: nxp: Rename board directory from board/freescale to board/nxp   Marek Vasut
• [PATCH v6 00/12] Rockchip VOP2 support   Dang Huynh via B4 Relay
  • [PATCH v6 06/12] video: rockchip: Add VOP2 support   Dang Huynh via B4 Relay
    • [PATCH v6 06/12] video: rockchip: Add VOP2 support   Chaoyi Chen
  • [PATCH v6 07/12] video: rockchip: vop2: Add video bridge support   Dang Huynh via B4 Relay
  • [PATCH v6 08/12] arm: dts: rockchip: rk356x: Prerelocate VOP in U-Boot proper   Dang Huynh via B4 Relay
  • [PATCH v6 09/12] configs: quartz64: Enable vidconsole   Dang Huynh via B4 Relay
  • [PATCH v6 10/12] video: rockchip: Add HDMI support for RK3568   Dang Huynh via B4 Relay
  • [PATCH v6 11/12] configs: pinetab2-rk3566: Enable video and USB keyboard   Dang Huynh via B4 Relay
  • [PATCH v6 12/12] clk: rockchip: rk3568: Use assigned VPLL clock when possible   Dang Huynh via B4 Relay
• [PATCH v6 01/12] video: rockchip: dw-mipi-dsi: Depend on CONFIG_VIDEO_BRIDGE   Dang Huynh via B4 Relay
• [PATCH v6 02/12] video: rockchip: dw_mipi_dsi: Improve pixel clock calculations   Dang Huynh via B4 Relay
• [PATCH v6 03/12] video: rockchip: dw_mipi_dsi: Proceed when external PHY is not defined   Dang Huynh via B4 Relay
• [PATCH v6 04/12] video: rockchip: dw-mipi-dsi: Add get_display_timing support   Dang Huynh via B4 Relay
• [PATCH v6 05/12] video: Add BOE TH101MB31IG002-28A MIPI-DSI panel   Dang Huynh via B4 Relay
• [PATCH 0/4] Add PCIe Endpoint controller support for TI J784S4 SoC   Tom Rini
• How to use ECDSA for signature verification?   Marko Mäkelä
  • How to use ECDSA for signature verification?   Anshul Dalal
    • How to use ECDSA for signature verification?   Marko Mäkelä
• [PATCH 0/2] Fixes for Clang builds for AArch64, improve CROSS_COMPILE handling   Dmitrii Sharshakov
  • [PATCH 1/2] build: fix prefix for Clang when CROSS_COMPILE is an absolute path   Dmitrii Sharshakov
  • [PATCH 2/2] arch: arm: fix AArch64 builds with Clang 21+   Dmitrii Sharshakov
  • [PATCH 0/2] Fixes for Clang builds for AArch64, improve CROSS_COMPILE handling   Tom Rini
• [PATCH] board: ti: CAT24C256WI-GT3 require min. 5ms delay (tWR) between write/read   Marian Cingel
• [PATCH v3 1/4] clk: scmi: Bulk allocate all sub-driver instance data   Marek Vasut
  • [PATCH v3 2/4] clk: scmi: Factor out clock control flags resolution   Marek Vasut
  • [PATCH v3 3/4] clk: scmi: Postpone clock name resolution   Marek Vasut
  • [PATCH v3 4/4] clk: scmi: Defer issue of SCMI_CLOCK_ATTRIBUTES   Marek Vasut
  • [PATCH v3 1/4] clk: scmi: Bulk allocate all sub-driver instance data   Peng Fan
• [PATCH 1/1] dm: typo programmaticaly   Heinrich Schuchardt
  • [PATCH 1/1] dm: typo programmaticaly   Bin Meng
  • [PATCH 1/1] dm: typo programmaticaly   Tom Rini
• [PATCH v4 00/12] spi: airoha: driver improvements   Mikhail Kshevetskiy
  • [PATCH v4 02/12] spi: airoha: add support of dual/quad wires spi modes to exec_op() handler   Mikhail Kshevetskiy
  • [PATCH v4 03/12] spi: airoha: add dma support   Mikhail Kshevetskiy
  • [PATCH v4 04/12] spi: airoha: return an error for continuous mode dirmap creation cases   Mikhail Kshevetskiy
  • [PATCH v4 05/12] spi: airoha: support of dualio/quadio flash reading commands   Mikhail Kshevetskiy
  • [PATCH v4 06/12] spi: airoha: buffer must be 0xff-ed before writing   Mikhail Kshevetskiy
  • [PATCH v4 07/12] dts: airoha: en7523: enable double speed flash reading   Mikhail Kshevetskiy
  • [PATCH v4 08/12] spi: airoha: avoid setting of page/oob sizes in REG_SPI_NFI_PAGEFMT   Mikhail Kshevetskiy
  • [PATCH v4 09/12] spi: airoha: reduce the number of modification of REG_SPI_NFI_CNFG and REG_SPI_NFI_SECCUS_SIZE registers   Mikhail Kshevetskiy
  • [PATCH v4 10/12] spi: airoha: set custom sector size equal to flash page size   Mikhail Kshevetskiy
  • [PATCH v4 11/12] spi: airoha: avoid usage of flash specific parameters   Mikhail Kshevetskiy
  • [PATCH v4 12/12] spi: airoha: en7523: workaround flash damaging if UART_TXD was short to GND   Mikhail Kshevetskiy
• [PATCH v4 01/12] spi: airoha: remove unnecessary operation adjust_op_size   Mikhail Kshevetskiy
• [PATCH 0/9] CI: test qemu-riscv64_smode[_acpi]   Heinrich Schuchardt
  • [PATCH RESEND 1/9] test: fdt_test_apply requires CONFIG_OF_LIBFDT_OVERLAY   Heinrich Schuchardt
    • [PATCH RESEND 1/9] test: fdt_test_apply requires CONFIG_OF_LIBFDT_OVERLAY   Ilias Apalodimas
      • [PATCH RESEND 1/9] test: fdt_test_apply requires CONFIG_OF_LIBFDT_OVERLAY   Tom Rini
      • [PATCH RESEND 1/9] test: fdt_test_apply requires CONFIG_OF_LIBFDT_OVERLAY   Heinrich Schuchardt
      • [PATCH RESEND 1/9] test: fdt_test_apply requires CONFIG_OF_LIBFDT_OVERLAY   Heinrich Schuchardt
      • [PATCH RESEND 1/9] test: fdt_test_apply requires CONFIG_OF_LIBFDT_OVERLAY   Tom Rini
    • [PATCH RESEND 1/9] test: fdt_test_apply requires CONFIG_OF_LIBFDT_OVERLAY   Tom Rini
      • [PATCH RESEND 1/9] test: fdt_test_apply requires CONFIG_OF_LIBFDT_OVERLAY   Heinrich Schuchardt
      • [PATCH RESEND 1/9] test: fdt_test_apply requires CONFIG_OF_LIBFDT_OVERLAY   Tom Rini
  • [PATCH 2/9] test: cmd/fdt: do not assume RNG device exists   Heinrich Schuchardt
    • [PATCH 2/9] test: cmd/fdt: do not assume RNG device exists   Ilias Apalodimas
    • [PATCH 2/9] test: cmd/fdt: do not assume RNG device exists   Simon Glass
      • [PATCH 2/9] test: cmd/fdt: do not assume RNG device exists   Tom Rini
  • [PATCH 3/9] test: cmd/bdinfo: make no flash assumption   Heinrich Schuchardt
    • [PATCH 3/9] test: cmd/bdinfo: make no flash assumption   Ilias Apalodimas
    • [PATCH 3/9] test: cmd/bdinfo: make no flash assumption   Simon Glass
  • [PATCH 4/9] test: cmd/bdinfo: consider arch_print_bdinfo() output   Heinrich Schuchardt
    • [PATCH 4/9] test: cmd/bdinfo: consider arch_print_bdinfo() output   Simon Glass
  • [PATCH 5/9] test: common/print: do not use fixed buffer addresses   Heinrich Schuchardt
    • [PATCH 5/9] test: common/print: do not use fixed buffer addresses   Ilias Apalodimas
    • [PATCH 5/9] test: common/print: do not use fixed buffer addresses   Simon Glass
  • [PATCH 6/9] test: cmd/fdt: do not use fixed buffer addresses   Heinrich Schuchardt
    • [PATCH 6/9] test: cmd/fdt: do not use fixed buffer addresses   Ilias Apalodimas
    • [PATCH 6/9] test: cmd/fdt: do not use fixed buffer addresses   Simon Glass
      • [PATCH 6/9] test: cmd/fdt: do not use fixed buffer addresses   Tom Rini
      • [PATCH 6/9] test: cmd/fdt: do not use fixed buffer addresses   Simon Glass
      • [PATCH 6/9] test: cmd/fdt: do not use fixed buffer addresses   Tom Rini
      • [PATCH 6/9] test: cmd/fdt: do not use fixed buffer addresses   Simon Glass
      • [PATCH 6/9] test: cmd/fdt: do not use fixed buffer addresses   Tom Rini
      • [PATCH 6/9] test: cmd/fdt: do not use fixed buffer addresses   Simon Glass
      • [PATCH 6/9] test: cmd/fdt: do not use fixed buffer addresses   Heinrich Schuchardt
  • [PATCH 7/9] common: default CONFIG_CONSOLE_RECORD_OUT_SIZE=0x6000   Heinrich Schuchardt
    • [PATCH 7/9] common: default CONFIG_CONSOLE_RECORD_OUT_SIZE=0x6000   Ilias Apalodimas
      • [PATCH 7/9] common: default CONFIG_CONSOLE_RECORD_OUT_SIZE=0x6000   Simon Glass
  • [PATCH 8/9] configs: CONFIG_CONSOLE_RECORD=y on qemu-riscv64_smode_acpi   Heinrich Schuchardt
  • [PATCH RESEND 9/9] CI: test qemu-riscv64_smode[_acpi]   Heinrich Schuchardt
• [U-Boot, v5, 1/1]net: phy: Add the Airoha EN8811H PHY driver   Marek Vasut
  • [U-Boot, v5, 1/1]net: phy: Add the Airoha EN8811H PHY driver   Lucien.Jheng
• [PATCH v4 1/3] Image size checks: Use HAS_SIZE_LIMIT consistently   Marek Vasut
  • [PATCH v4 1/3] Image size checks: Use HAS_SIZE_LIMIT consistently   Philip Oberfichtner
• [PATCH] ARM: Fix HAS_ARMV7_SECURE_BASE help text   Marek Vasut
  • [PATCH] ARM: Fix HAS_ARMV7_SECURE_BASE help text   Tom Rini
• [PATCH v4 2/3] Image size checks: Clarify help texts   Marek Vasut
• [PATCH v4 3/3] Image size checks: Deduplicate Makefile   Marek Vasut
• [PATCH v1] sync socfpga common u-boot dts   Brian Sune
  • [PATCH v1] sync socfpga common u-boot dts   Sune Brian
    • [PATCH v1] sync socfpga common u-boot dts   Tom Rini
      • [PATCH v1] sync socfpga common u-boot dts   Sune Brian
      • [PATCH v1] sync socfpga common u-boot dts   Tom Rini
      • [PATCH v1] sync socfpga common u-boot dts   Sune Brian
  • [PATCH v1] sync socfpga common u-boot dts   Chee, Tien Fong
• [PATCH v5 0/3] Harmonize image size checks   Philip Oberfichtner
  • [PATCH v5 1/3] Image size checks: Use HAS_SIZE_LIMIT consistently   Philip Oberfichtner
  • [PATCH v5 2/3] Image size checks: Clarify help texts   Philip Oberfichtner
  • [PATCH v5 3/3] Makefile: Deduplicate image size checks   Philip Oberfichtner
• [PATCH 0/5] arm: k3: j784s4: Add PCIe boot support   Hrushikesh Salunke
  • [PATCH 1/5] arm: mach-k3: j784s4: Update SoC autogen data to enable PCIe boot   Hrushikesh Salunke
    • [PATCH 1/5] arm: mach-k3: j784s4: Update SoC autogen data to enable PCIe boot   Tom Rini
      • [PATCH 1/5] arm: mach-k3: j784s4: Update SoC autogen data to enable PCIe boot   Hrushikesh Salunke
  • [PATCH 2/5] phy: cadence: Add config to enable Cadence Torrent PHY at SPL stage   Hrushikesh Salunke
    • [PATCH 2/5] phy: cadence: Add config to enable Cadence Torrent PHY at SPL stage   Tom Rini
  • [PATCH 3/5] phy: ti: Add config to enable J721E WIZ SERDES wrapper at SPL stage   Hrushikesh Salunke
    • [PATCH 3/5] phy: ti: Add config to enable J721E WIZ SERDES wrapper at SPL stage   Tom Rini
  • [PATCH 4/5] configs: j784s4_evm_r5_defconfig: Enable configs for PCIe boot   Hrushikesh Salunke
  • [PATCH 5/5] configs: j784s4_evm_a72_defconfig: Enable configs for PCIe boot   Hrushikesh Salunke
• [PATCH] .gitignore: ignore more files generated for the sandbox   yegorslists at googlemail.com
  • [PATCH] .gitignore: ignore more files generated for the sandbox   Tom Rini
• [PATCH] pinctrl: bcm283x: Add GPIO pull-up/down control for BCM2835 and BCM2711   Cibil Pankiras
  • [PATCH] pinctrl: bcm283x: Add GPIO pull-up/down control for BCM2835 and BCM2711   Matthias Brugger
    • [PATCH] pinctrl: bcm283x: Add GPIO pull-up/down control for BCM2835 and BCM2711   Cibil Pankiras
      • [PATCH] pinctrl: bcm283x: Add GPIO pull-up/down control for BCM2835 and BCM2711   Matthias Brugger
      • [PATCH] pinctrl: bcm283x: Add GPIO pull-up/down control for BCM2835 and BCM2711   Cibil Pankiras
• [PATCH 1/2] clk: versal: Add support for CLK_AUTO_ID   Michal Simek
  • [PATCH 2/2] clk: versal: Cleanup driver   Michal Simek
  • [PATCH 1/2] clk: versal: Add support for CLK_AUTO_ID   Michal Simek
• [PATCH] arm: imx: Add command to get offset of first image in AHAB OS container   Lukasz Majewski
  • [PATCH] arm: imx: Add command to get offset of first image in AHAB OS container   Tom Rini
    • [PATCH] arm: imx: Add command to get offset of first image in AHAB OS container   Łukasz Majewski
• [PATCH 1/2] bin: Fix the broken symbolic link of qemu_arm64 config file   Bin Meng
  • [PATCH 2/2] bin: Rename QEMU arm* conf files   Bin Meng
• [u-boot-test-hooks PATCH 1/2] bin: Fix the broken symbolic link of qemu_arm64 config file   Bin Meng
  • [u-boot-test-hooks PATCH 2/2] bin: Rename QEMU arm* conf files   Bin Meng
• [PATCH v2 1/2] qemu: arm: Rename QEMU arm* defconfig files   Bin Meng
  • [PATCH v2 2/2] qemu: arm: sbsa: Rename sbsa defconfig to arm64   Bin Meng
    • [PATCH v2 2/2] qemu: arm: sbsa: Rename sbsa defconfig to arm64   Ilias Apalodimas
• [PATCH] docker: Use GitHub-mirrored TF-A repository to avoid clone failures   Bin Meng
  • [PATCH] docker: Use GitHub-mirrored TF-A repository to avoid clone failures   Tom Rini
    • [PATCH] docker: Use GitHub-mirrored TF-A repository to avoid clone failures   Jerome Forissier
      • [PATCH] docker: Use GitHub-mirrored TF-A repository to avoid clone failures   Tom Rini
  • [PATCH] docker: Use GitHub-mirrored TF-A repository to avoid clone failures   Peter Robinson
    • [PATCH] docker: Use GitHub-mirrored TF-A repository to avoid clone failures   Jerome Forissier
• [PATCH 1/2] board: phytec: phytec_som_detection: Add missing assignment   Daniel Schultz
  • [PATCH 2/2] board: phytec: phytec_som_detection: Add support for phyFLEX   Daniel Schultz
    • [Upstream] [PATCH 2/2] board: phytec: phytec_som_detection: Add support for phyFLEX   Teresa Remmet
    • [Upstream] [PATCH 2/2] board: phytec: phytec_som_detection: Add support for phyFLEX   Dominik Haller
• [PATCH] docker: Correct the linux/arm64 platform string   Bin Meng
• [PATCH] spi: cadence: Remove cdns,is-dma DT property   Michal Simek
  • [PATCH] spi: cadence: Remove cdns,is-dma DT property   Michal Simek
• [PATCH 1/2] firmware: xilinx: Add support for enhancement SMC format   Michal Simek
  • [PATCH 2/2] clk: versal: Enable clock driver for Versal Gen 2   Michal Simek
  • [PATCH 1/2] firmware: xilinx: Add support for enhancement SMC format   Michal Simek
• [u-boot-test-hooks][PATCH] labgrid: sage: Add new lab   Tom Rini
• [PATCH] Gitlab: Add a "sage-lab" stage to access a board farm   Tom Rini
  • [PATCH] Gitlab: Add a "sage-lab" stage to access a board farm   Simon Glass
    • [PATCH] Gitlab: Add a "sage-lab" stage to access a board farm   Tom Rini
      • [PATCH] Gitlab: Add a "sage-lab" stage to access a board farm   Simon Glass
      • [PATCH] Gitlab: Add a "sage-lab" stage to access a board farm   Tom Rini
      • [PATCH] Gitlab: Add a "sage-lab" stage to access a board farm   Simon Glass
      • [PATCH] Gitlab: Add a "sage-lab" stage to access a board farm   Tom Rini
• [PATCH 0/8] mmc: sdhci-cadence: Improvements and fixes for Cadence SDHCI driver   Tanmay Kathpalia
  • [PATCH 1/8] mmc: sdhci-cadence: Add reset control support   Tanmay Kathpalia
    • [PATCH 1/8] mmc: sdhci-cadence: Add reset control support   Peng Fan
      • [PATCH 1/8] mmc: sdhci-cadence: Add reset control support   Tanmay Kathpalia
      • [PATCH 1/8] mmc: sdhci-cadence: Add reset control support   Peng Fan
      • [PATCH 1/8] mmc: sdhci-cadence: Add reset control support   Tanmay Kathpalia
      • [PATCH 1/8] mmc: sdhci-cadence: Add reset control support   Peng Fan
      • [PATCH 1/8] mmc: sdhci-cadence: Add reset control support   Tanmay Kathpalia
  • [PATCH 2/8] mmc: sdhci-cadence: Use max-frequency property from device tree   Tanmay Kathpalia
    • [PATCH 2/8] mmc: sdhci-cadence: Use max-frequency property from device tree   Peng Fan
      • [PATCH 2/8] mmc: sdhci-cadence: Use max-frequency property from device tree   Tanmay Kathpalia
  • [PATCH 3/8] mmc: sdhci-cadence: Set controller and PHY speed modes for SD and eMMC cards   Tanmay Kathpalia
  • [PATCH 4/8] mmc: sdhci: Add SDHCI_SPEC_400, _410, and _420 version defines   Tanmay Kathpalia
  • [PATCH 5/8] mmc: sdhci-cadence: Use hardware version field for Cadence SDHCI controller   Tanmay Kathpalia
  • [PATCH 6/8] mmc: sdhci-cadence: Enable software tuning for both SD and eMMC interfaces   Tanmay Kathpalia
  • [PATCH 7/8] mmc: sdhci-cadence6: socfpga: Fix DT property naming convention   Tanmay Kathpalia
    • [PATCH 7/8] mmc: sdhci-cadence6: socfpga: Fix DT property naming convention   Peng Fan
      • [PATCH 7/8] mmc: sdhci-cadence6: socfpga: Fix DT property naming convention   Tanmay Kathpalia
  • [PATCH 8/8] mmc: sdhci-cadence6: Add DLL master control and improve tuning reliability   Tanmay Kathpalia
    • [PATCH 8/8] mmc: sdhci-cadence6: Add DLL master control and improve tuning reliability   Peng Fan
      • [PATCH 8/8] mmc: sdhci-cadence6: Add DLL master control and improve tuning reliability   Tanmay Kathpalia
• [ANN] U-Boot v2026.01-rc2 released   Tom Rini
• [PATCH v5 00/13] am62: IO+DDR resume support   Markus Schneider-Pargmann (TI.com)
  • [PATCH v5 01/13] arm: mach-k3: Remove CANUART IO isolation   Markus Schneider-Pargmann (TI.com)
    • [PATCH v5 01/13] arm: mach-k3: Remove CANUART IO isolation   Dhruva Gole
  • [PATCH v5 02/13] arm: mach-k3: Kconfig: Add symbols for IO+DDR Low Power Mode   Markus Schneider-Pargmann (TI.com)
    • [PATCH v5 02/13] arm: mach-k3: Kconfig: Add symbols for IO+DDR Low Power Mode   Dhruva Gole
      • [PATCH v5 02/13] arm: mach-k3: Kconfig: Add symbols for IO+DDR Low Power Mode   Markus Schneider-Pargmann
  • [PATCH v5 03/13] ram: k3-ddrss: Add support for DDR in self-refresh   Markus Schneider-Pargmann (TI.com)
    • [PATCH v5 03/13] ram: k3-ddrss: Add support for DDR in self-refresh   Dhruva Gole
  • [PATCH v5 04/13] firmware: ti_sci: Add TI_SCI_MSG_MIN_CONTEXT_RESTORE   Markus Schneider-Pargmann (TI.com)
    • [PATCH v5 04/13] firmware: ti_sci: Add TI_SCI_MSG_MIN_CONTEXT_RESTORE   Dhruva Gole
  • [PATCH v5 05/13] arm: mach-k3: common: Add CANUART wakeup check helpers   Markus Schneider-Pargmann (TI.com)
  • [PATCH v5 06/13] arm: mach-k3: common: Add lpm_resume_from_ddr   Markus Schneider-Pargmann (TI.com)
  • [PATCH v5 07/13] arm: mach-k3: common: Helper for LPM meta data address from DT   Markus Schneider-Pargmann (TI.com)
  • [PATCH v5 08/13] arm: mach-k3: am62a7_init: Resume on LPM exit   Markus Schneider-Pargmann (TI.com)
  • [PATCH v5 09/13] arm: mach-k3: am62p5_init: Resume on LPM exit   Markus Schneider-Pargmann (TI.com)
  • [PATCH v5 10/13] arm: dts: k3-am62a: Add r5 device nodes   Markus Schneider-Pargmann (TI.com)
  • [PATCH v5 11/13] arm: dts: k3-am62p: Add r5 device nodes   Markus Schneider-Pargmann (TI.com)
  • [PATCH v5 12/13] configs: am62ax_evm_r5: Enable IODDR resume support   Markus Schneider-Pargmann (TI.com)
  • [PATCH v5 13/13] configs: am62p_evm_r5_defconfig: Enable IODDR resume support   Markus Schneider-Pargmann (TI.com)
• [PATCH v3 0/2] 'part name' subcommand and some robustification   Rasmus Villemoes
  • [PATCH v3 2/2] cmd/part.c: implement "part name" subcommand   Rasmus Villemoes
    • [PATCH v3 2/2] cmd/part.c: implement "part name" subcommand   Anshul Dalal
      • [PATCH v3 2/2] cmd/part.c: implement "part name" subcommand   Rasmus Villemoes
      • [PATCH v3 2/2] cmd/part.c: implement "part name" subcommand   Quentin Schulz
  • [PATCH v3 0/2] 'part name' subcommand and some robustification   Anshul Dalal
  • [PATCH v3 0/2] 'part name' subcommand and some robustification   Tom Rini
• [PATCH v3 1/2] disk/part.c: ensure strings in struct disk_partition are valid after successful get_info   Rasmus Villemoes
  • [PATCH v3 1/2] disk/part.c: ensure strings in struct disk_partition are valid after successful get_info   Anshul Dalal
    • [PATCH v3 1/2] disk/part.c: ensure strings in struct disk_partition are valid after successful get_info   Rasmus Villemoes
• [PATCH 1/1] [U-Boot, v6, 1/1]net: phy: Add the Airoha EN8811H PHY driver   Lucien.Jheng
  • [PATCH 1/1] [U-Boot, v6, 1/1]net: phy: Add the Airoha EN8811H PHY driver   Marek Vasut
    • [PATCH 1/1] [U-Boot, v6, 1/1]net: phy: Add the Airoha EN8811H PHY driver   Lucien.Jheng
• [GIT PULL] please pull scmi-master-2025-11-11   Peng Fan
  • [GIT PULL] please pull scmi-master-2025-11-11   Tom Rini
• [PATCH v2 0/5] Add support for SM3 secure hash   Heiko Schocher
  • [PATCH v2 2/5] lib: implement sm3 256 hash   Heiko Schocher
    • [PATCH v2 2/5] lib: implement sm3 256 hash   Ilias Apalodimas
      • [PATCH v2 2/5] lib: implement sm3 256 hash   Heiko Schocher
• [PATCH v2 1/5] lib: Import rol32 function from Linux   Heiko Schocher
  • [PATCH v2 1/5] lib: Import rol32 function from Linux   Ilias Apalodimas
• [PATCH v2 3/5] test: cmd: hash: add unit test for sm3_256   Heiko Schocher
  • [PATCH v2 3/5] test: cmd: hash: add unit test for sm3_256   Heinrich Schuchardt
    • [PATCH v2 3/5] test: cmd: hash: add unit test for sm3_256   Heiko Schocher
• [PATCH v2 4/5] tpm2: add sm3 256 hash support   Heiko Schocher
  • [PATCH v2 4/5] tpm2: add sm3 256 hash support   Ilias Apalodimas
    • [PATCH v2 4/5] tpm2: add sm3 256 hash support   Ilias Apalodimas
    • [PATCH v2 4/5] tpm2: add sm3 256 hash support   Heiko Schocher
• [PATCH v2 5/5] test: cmd: fix a typo in md5 test   Heiko Schocher
  • [PATCH v2 5/5] test: cmd: fix a typo in md5 test   Ilias Apalodimas
• [PATCH v2 0/5] arm: k3: j784s4: Add PCIe boot support   Hrushikesh Salunke
  • [PATCH v2 1/5] arm: mach-k3: j784s4: Update SoC autogen data to enable PCIe boot   Hrushikesh Salunke
  • [PATCH v2 2/5] phy: cadence: Add config to enable Cadence Torrent PHY at SPL stage   Hrushikesh Salunke
  • [PATCH v2 3/5] phy: ti: Add config to enable J721E WIZ SERDES wrapper at SPL stage   Hrushikesh Salunke
  • [PATCH v2 4/5] configs: j784s4_evm_r5_defconfig: Enable configs for PCIe boot   Hrushikesh Salunke
    • [PATCH v2 4/5] configs: j784s4_evm_r5_defconfig: Enable configs for PCIe boot   Kumar, Udit
      • [PATCH v2 4/5] configs: j784s4_evm_r5_defconfig: Enable configs for PCIe boot   Hrushikesh Salunke
  • [PATCH v2 5/5] configs: j784s4_evm_a72_defconfig: Enable configs for PCIe boot   Hrushikesh Salunke
  • [PATCH v2 0/5] arm: k3: j784s4: Add PCIe boot support   Anshul Dalal
  • [PATCH v2 0/5] arm: k3: j784s4: Add PCIe boot support   Kumar, Udit
    • [PATCH v2 0/5] arm: k3: j784s4: Add PCIe boot support   Hrushikesh Salunke
• [PATCH v3 0/6] remoteproc: k3-r5: Build fixes and security improvements   Philippe Schenker
  • [PATCH v3 1/6] arm: dts: k3-am642-evm: Remove duplicate node   Philippe Schenker
  • [PATCH v3 2/6] remoteproc: k3-r5: cast size to size_t6dd   Philippe Schenker
  • [PATCH v3 3/6] soc: ti: pruss: Fix size ptr type in probe   Philippe Schenker
  • [PATCH v3 4/6] mach-k3: security: Propagate verified image addr   Philippe Schenker
  • [PATCH v3 5/6] remoteproc: k3-r5: Use verified image address   Philippe Schenker
  • [PATCH v3 6/6] remoteproc: k3-r5: Implement is_running operation   Philippe Schenker
    • [PATCH v3 6/6] remoteproc: k3-r5: Implement is_running operation   Andrew Davis
      • [PATCH v3 6/6] remoteproc: k3-r5: Implement is_running operation   Philippe Schenker
      • [PATCH v3 6/6] remoteproc: k3-r5: Implement is_running operation   Andrew Davis
  • [PATCH v3 0/6] remoteproc: k3-r5: Build fixes and security improvements   Tom Rini
• [PATCH v2] armv8: Fix transfer list passing with KVM   Ilias Apalodimas
• [PATCH v5 00/24] Introduce Firmware Update Support for Arm PSA   Sughosh Ganu
• [PATCH v5 09/24] fwu_arm_psa: Initialize the update agent   Sughosh Ganu
• [PATCH v5 10/24] fwu_arm_psa: Read the FWU directory through get_image_info()   Sughosh Ganu
• [PATCH v5 11/24] fwu_arm_psa: Add staging ABIs   Sughosh Ganu
• [PATCH v5 15/24] efi_loader: fwu: fwu_arm_psa: Disable trial state handling   Sughosh Ganu
• [PATCH v3] net: xgmac: Augment mdio read/write with cl-45 format support   Ng, Boon Khai
  • [PATCH v3] net: xgmac: Augment mdio read/write with cl-45 format support   Tom Rini
  • [PATCH v3] net: xgmac: Augment mdio read/write with cl-45 format support   Chee, Tien Fong
• [PATCH 0/3] fit: allow signing with only an engine_id   Wolfgang Wallner
  • [PATCH 0/3] fit: allow signing with only an engine_id   Quentin Schulz
    • [PATCH 0/3] fit: allow signing with only an engine_id   Wolfgang Wallner
• [PATCH 0/4] Add support for Kontron i.MX8MP and i.MX93 OSM hardware   Frieder Schrempf
  • [PATCH 1/4] imx: Add support for Kontron i.MX8MP OSM-S SoM and BL carrier board   Frieder Schrempf
  • [PATCH 2/4] arm64: dts: imx8mp-kontron: Fix USB OTG role switching   Frieder Schrempf
    • [PATCH 2/4] arm64: dts: imx8mp-kontron: Fix USB OTG role switching   Fabio Estevam
      • [PATCH 2/4] arm64: dts: imx8mp-kontron: Fix USB OTG role switching   Frieder Schrempf
      • [PATCH 2/4] arm64: dts: imx8mp-kontron: Fix USB OTG role switching   Fabio Estevam
      • [PATCH 2/4] arm64: dts: imx8mp-kontron: Fix USB OTG role switching   Tom Rini
  • [PATCH 3/4] arm: imx: imx9: Use arch override for env_get_location()   Frieder Schrempf
  • [PATCH 4/4] imx: Add support for Kontron i.MX93 OSM-S SoM and BL carrier board   Frieder Schrempf
• [PATCH v2] firmware: ti_sci: Fix memory leaks in devm_ti_sci_get_of_resource   Francois Berder
• [PATCH] upl: Fix buf array size   Francois Berder
  • [PATCH] upl: Fix buf array size   Simon Glass
  • [PATCH] upl: Fix buf array size   Tom Rini
• [PATCH 0/3] arm: dts: at91: sam9x60: Fix and improve flexcom 0 nodes   Alexander Dahl
  • [PATCH 1/3] ARM: dts: at91: sam9x60: Fix flexcom/i2c node addresses   Alexander Dahl
  • [PATCH 2/3] ARM: dts: at91: sam9x60: Define i2c0 node in dtsi   Alexander Dahl
  • [PATCH 3/3] ARM: dts: at91: sam9x60: Add spi0 node (flexcom 0)   Alexander Dahl
    • [PATCH 3/3] ARM: dts: at91: sam9x60: Add spi0 node (flexcom 0)   Eugen Hristev
      • [PATCH 3/3] ARM: dts: at91: sam9x60: Add spi0 node (flexcom 0)   Alexander Dahl
      • [PATCH 3/3] ARM: dts: at91: sam9x60: Add spi0 node (flexcom 0)   Eugen Hristev
      • [PATCH 3/3] ARM: dts: at91: sam9x60: Add spi0 node (flexcom 0)   Alexander Dahl
      • [PATCH 3/3] ARM: dts: at91: sam9x60: Add spi0 node (flexcom 0)   Eugen Hristev
• [PATCH v2] lib: optee: forbid OP-TEE OS loading without adding OP-TEE OS reserved-memory nodes   Quentin Schulz
  • [PATCH v2] lib: optee: forbid OP-TEE OS loading without adding OP-TEE OS reserved-memory nodes   Tom Rini
• [PATCH] fs/erofs: Fix realloc error handling   Francois Berder
  • [PATCH] fs/erofs: Fix realloc error handling   Tom Rini
• [PATCH] imx91: fix ENET1_TD3 pinmux for GPIO function   Francesco Valla
  • [PATCH] imx91: fix ENET1_TD3 pinmux for GPIO function   Fabio Estevam
    • [PATCH] imx91: fix ENET1_TD3 pinmux for GPIO function   Javier Viguera
    • [PATCH] imx91: fix ENET1_TD3 pinmux for GPIO function   Francesco Valla
• [PATCH v2 0/3] Add support for Kontron i.MX8MP and i.MX93 OSM hardware   Frieder Schrempf
  • [PATCH v2 1/3] imx: Add support for Kontron i.MX8MP OSM-S SoM and BL carrier board   Frieder Schrempf
  • [PATCH v2 2/3] arm: imx: imx9: Use arch override for env_get_location()   Frieder Schrempf
  • [PATCH v2 3/3] imx: Add support for Kontron i.MX93 OSM-S SoM and BL carrier board   Frieder Schrempf
• [PATCH v2 0/5] rsa: fix dependency, rename and relocate RSASSA PSS symbols   Tom Rini
• [PATCH] configs: starfive: enable wget https   E Shattow
• [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Marek Vasut
  • [PATCH 2/2] test/py: android: Point fdt command to aligned addresses   Marek Vasut
  • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Simon Glass
    • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Tom Rini
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Simon Glass
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Tom Rini
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Simon Glass
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Tom Rini
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Marek Vasut
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Simon Glass
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Tom Rini
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Simon Glass
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Marek Vasut
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Simon Glass
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Tom Rini
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Simon Glass
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Tom Rini
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Simon Glass
      • [PATCH 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Mattijs Korpershoek
• [PATCH] test/py: Use aligned address for overlays in 'extension' test   Marek Vasut
  • [PATCH] test/py: Use aligned address for overlays in 'extension' test   Tom Rini
    • [PATCH] test/py: Use aligned address for overlays in 'extension' test   Marek Vasut
      • [PATCH] test/py: Use aligned address for overlays in 'extension' test   Tom Rini
      • Re: [PATCH] test/py: Use aligned address for overlays in 'extension' test   Heinrich Schuchardt
      • [PATCH] test/py: Use aligned address for overlays in 'extension' test   Tom Rini
• [PATCH v3 0/5] arm: k3: j784s4: Add PCIe boot support   Hrushikesh Salunke
  • [PATCH v3 1/5] arm: mach-k3: j784s4: Update SoC autogen data to enable PCIe boot   Hrushikesh Salunke
  • [PATCH v3 2/5] phy: cadence: Add config to enable Cadence Torrent PHY at SPL stage   Hrushikesh Salunke
  • [PATCH v3 3/5] phy: ti: Add config to enable J721E WIZ SERDES wrapper at SPL stage   Hrushikesh Salunke
  • [PATCH v3 4/5] configs: j784s4_evm_r5_defconfig: Enable configs for PCIe boot   Hrushikesh Salunke
    • [PATCH v3 4/5] configs: j784s4_evm_r5_defconfig: Enable configs for PCIe boot   Kumar, Udit
      • [PATCH v3 4/5] configs: j784s4_evm_r5_defconfig: Enable configs for PCIe boot   Hrushikesh Salunke
  • [PATCH v3 5/5] configs: j784s4_evm_a72_defconfig: Enable configs for PCIe boot   Hrushikesh Salunke
• Hi, Dear u-boot lists, who can help answer my questions below about device_bind_common in drivers/core/device.c of u-boot? Thanks!   Xiujun, Wang (CSW)
• [PATCH] doc: board: ti: k3: Update TI firmware repository URL to GitHub   Vignesh Raghavendra
  • [PATCH] doc: board: ti: k3: Update TI firmware repository URL to GitHub   Tom Rini
  • [PATCH] doc: board: ti: k3: Update TI firmware repository URL to GitHub   Nishanth Menon
• [PATCH] x86: boot: fix unreachable else branch in boot_prep_linux   ranquet guillaume
  • [PATCH] x86: boot: fix unreachable else branch in boot_prep_linux   Bin Meng
• [PATCH -master] doc: board: ti: am6254atl_sk: fix PRELOADED_BL33_BASE   Anshul Dalal
• [PATCH] cmd: extension: Fix possible null pointer dereference   Kory Maincent
  • [PATCH] cmd: extension: Fix possible null pointer dereference   Quentin Schulz
    • [PATCH] cmd: extension: Fix possible null pointer dereference   Kory Maincent
  • [PATCH] cmd: extension: Fix possible null pointer dereference   Heinrich Schuchardt
• [PATCH] boot: pxe_utils: Fix memory allocation issues in overlay_dir handling   Kory Maincent
  • [PATCH] boot: pxe_utils: Fix memory allocation issues in overlay_dir handling   Quentin Schulz
    • [PATCH] boot: pxe_utils: Fix memory allocation issues in overlay_dir handling   Kory Maincent
      • [PATCH] boot: pxe_utils: Fix memory allocation issues in overlay_dir handling   Quentin Schulz
• [PATCH v2] rockchip: mkimage: enhance comments for v1 header   Quentin Schulz
  • [PATCH v2] rockchip: mkimage: enhance comments for v1 header   Kever Yang
• [PATCH v1 1/1] regulator: qcom-rpmh-regulator: add support for PM8150 PM8350 PM7325   Aswin Murugan
  • [PATCH v1 1/1] regulator: qcom-rpmh-regulator: add support for PM8150 PM8350 PM7325   neil.armstrong at linaro.org
• [PATCH v1 0/2] Added pinctrl driver for QCS615 SoC   Aswin Murugan
  • [PATCH v1] pinctrl: qcom: add driver for QCS615 SoC   Aswin Murugan
    • [PATCH v1] pinctrl: qcom: add driver for QCS615 SoC   neil.armstrong at linaro.org
  • [PATCH v1 2/2] qcom_defconfig: enable pinctrl for QCS615   Aswin Murugan
    • [PATCH v1 2/2] qcom_defconfig: enable pinctrl for QCS615   Tom Rini
• [PATCH v1] pinctrl: qcom: Add pingroup definitions for SC7280   Aswin Murugan
• [PATCH v1] smem: msm: Fix memory-region lookup, direct <reg> mapping and update SMEM host count   Aswin Murugan
• [PATCH 0/3] ti: add speed grades support for AM62a   Tom Rini
• [PATCH 00/11] led: remove u-boot,boot-led and u-boot,error-led + add cmd doc   Quentin Schulz
  • [PATCH 01/11] cmd: led: fix help text for blink subcommand   Quentin Schulz
  • [PATCH 02/11] doc: move legacy API documented in README.LED to doc/api/led.rst   Quentin Schulz
  • [PATCH 03/11] doc: cmd: document the led shell command   Quentin Schulz
    • [PATCH 03/11] doc: cmd: document the led shell command   Quentin Schulz
      • [PATCH 03/11] doc: cmd: document the led shell command   Tom Rini
      • [PATCH 03/11] doc: cmd: document the led shell command   Simon Glass
      • [PATCH 03/11] doc: cmd: document the led shell command   Quentin Schulz
  • [PATCH 04/11] doc: dt-bindings: remove duplicates with dts/upstream   Quentin Schulz
  • [PATCH 05/11] arm: dts: rockchip: rk3188-radxarock: remove unused u-boot,boot-led   Quentin Schulz
  • [PATCH 06/11] rockchip: rk3188: remove setup_led from xPL   Quentin Schulz
  • [PATCH 07/11] arm: dts: rockchip: rk3399-puma: remove u-boot,boot-led   Quentin Schulz
  • [PATCH 08/11] arm: dts: rockchip: px30-ringneck: remove u-boot,boot-led   Quentin Schulz
  • [PATCH 09/11] arm: dts: rockchip: rk3066a-mk808: remove unused u-boot,boot-led   Quentin Schulz
  • [PATCH 10/11] sam9x60-curiosity: migrate Boot LED setup to use /options/u-boot/boot-led   Quentin Schulz
    • [PATCH 10/11] sam9x60-curiosity: migrate Boot LED setup to use /options/u-boot/boot-led   Alexander Dahl
      • [PATCH 10/11] sam9x60-curiosity: migrate Boot LED setup to use /options/u-boot/boot-led   Quentin Schulz
  • [PATCH 11/11] doc: remove u-boot,boot-led and u-boot,error-led from "binding"   Quentin Schulz
  • [PATCH 00/11] led: remove u-boot, boot-led and u-boot, error-led + add cmd doc   Patrice CHOTARD
    • [PATCH 00/11] led: remove u-boot, boot-led and u-boot, error-led + add cmd doc   Patrice CHOTARD
• [PATCHv2 0/7] video: Remove unused drivers, clean up dependencies   Tom Rini
  • [PATCHv2 2/7] video: tegra: Rework some of the driver dependencies   Tom Rini
  • [PATCHv2 3/7] video: Tighten some video driver dependencies   Tom Rini
  • [PATCHv2 4/7] video: anx9804: Only build when needed   Tom Rini
  • [PATCHv2 5/7] video: ihs_video_out: Add missing <asm/io.h> to ihs_video_out.c   Tom Rini
  • [PATCHv2 6/7] video: sharp-lq101r1sx01: Do not make use of 'z' for printing non-size_t   Tom Rini
  • [PATCHv2 7/7] video: stm32: stm32_ltdc: Add missing <linux/sizes.h> to stm32_ltdc.c   Tom Rini
• [PATCHv2 1/7] video: mali_dp: Remove unused driver   Tom Rini
• [PATCH] ufs: rcar-gen5: Use a unique U_BOOT_DRIVER name   Tom Rini
  • [PATCH] ufs: rcar-gen5: Use a unique U_BOOT_DRIVER name   Marek Vasut
  • [PATCH] ufs: rcar-gen5: Use a unique U_BOOT_DRIVER name   Neil Armstrong
• [PATCH] fs/jffs2: Make depend on !64BIT   Tom Rini
  • [PATCH] fs/jffs2: Make depend on !64BIT   Heinrich Schuchardt
    • [PATCH] fs/jffs2: Make depend on !64BIT   Tom Rini
• [PATCH] net: phy: Disallow PHY_MSCC and PHY_VITESSE under COMPILE_TEST   Tom Rini
• [PATCH] driver: nand: skip BBT scan during SPL to reduce size and complexity   dinesh.maniyam at altera.com
  • [PATCH] driver: nand: skip BBT scan during SPL to reduce size and complexity   Heinrich Schuchardt
    • [PATCH] driver: nand: skip BBT scan during SPL to reduce size and complexity   Maniyam, Dinesh
    • [PATCH] driver: nand: skip BBT scan during SPL to reduce size and complexity   Marek Vasut
      • [PATCH] driver: nand: skip BBT scan during SPL to reduce size and complexity   Miquel Raynal
      • [PATCH] driver: nand: skip BBT scan during SPL to reduce size and complexity   Maniyam, Dinesh
  • [PATCH] driver: nand: skip BBT scan during SPL to reduce size and complexity   Michael Nazzareno Trimarchi
• [PATCH 0/6] fat: Some code improvements   Heinrich Schuchardt
  • [PATCH 1/6] fat: Create an internal header file   Heinrich Schuchardt
  • [PATCH 2/6] fat: Separate fat.c from fat_write.c   Heinrich Schuchardt
    • [PATCH 2/6] fat: Separate fat.c from fat_write.c   Maarten Brock
      • [PATCH 2/6] fat: Separate fat.c from fat_write.c   Heinrich Schuchardt
      • [PATCH 2/6] fat: Separate fat.c from fat_write.c   Tom Rini
  • [PATCH 3/6] fat: Update struct fat_itr to kernel-doc style   Heinrich Schuchardt
  • [PATCH 4/6] fat: Remove typedefs in fat.h   Heinrich Schuchardt
  • [PATCH 5/6] fat: Convert fat.h to kernel-doc style   Heinrich Schuchardt
  • [PATCH 6/6] fat: Use standard types for fixed-size values   Heinrich Schuchardt
  • [PATCH 0/6] fat: Some code improvements   Tom Rini
    • [PATCH 0/6] fat: Some code improvements   Heinrich Schuchardt
      • [PATCH 0/6] fat: Some code improvements   Tom Rini
• [PATCH v1] imx95_evk: Initialize the ELE RNG context   alice.guo at oss.nxp.com
  • 回复: [PATCH v1] imx95_evk: Initialize the ELE RNG context   Alice Guo (OSS)
    • [PATCH v1] imx95_evk: Initialize the ELE RNG context   Fabio Estevam
      • [PATCH v1] imx95_evk: Initialize the ELE RNG context   Francesco Dolcini
• [PATCH v2] boot: pxe_utils: Fix memory allocation issues in overlay_dir handling   Kory Maincent
  • [PATCH v2] boot: pxe_utils: Fix memory allocation issues in overlay_dir handling   Quentin Schulz
  • [PATCH v2] boot: pxe_utils: Fix memory allocation issues in overlay_dir handling   Heinrich Schuchardt
    • [PATCH v2] boot: pxe_utils: Fix memory allocation issues in overlay_dir handling   Quentin Schulz
• [PATCH] mtd: spi-nor: winbond: Make sure w25q{01,02}jv behave correctly   Miquel Raynal
• [PATCH] mtd: spinor: winbond: Describe several chips   Miquel Raynal
  • [PATCH] mtd: spinor: winbond: Describe several chips   Tom Rini
    • [PATCH] mtd: spinor: winbond: Describe several chips   Michael Nazzareno Trimarchi
      • [PATCH] mtd: spinor: winbond: Describe several chips   Tom Rini
      • [PATCH] mtd: spinor: winbond: Describe several chips   Michael Nazzareno Trimarchi
      • [PATCH] mtd: spinor: winbond: Describe several chips   Michael Nazzareno Trimarchi
      • [PATCH] mtd: spinor: winbond: Describe several chips   Miquel Raynal
      • [PATCH] mtd: spinor: winbond: Describe several chips   Michael Nazzareno Trimarchi
      • [PATCH] mtd: spinor: winbond: Describe several chips   Tom Rini
• [PATCH v6 0/5] Added QCOM RPMH Power Domain Driver   Aswin Murugan
  • (subset) [PATCH v6 0/5] Added QCOM RPMH Power Domain Driver   Neil Armstrong
• [PATCH v6 1/5] soc: qcom: cmd-db: Add cmd_db_read_slave_id() & cmd_db_read_aux_data() functions   Aswin Murugan
• [PATCH v6 2/5] power-domain: Add QCOM RPMH Power Domain Driver Support   Aswin Murugan
• [PATCH v6 3/5] power-domain: Add warning when power-domain driver is missing   Aswin Murugan
• [PATCH v6 4/5] mach-snapdragon: fixup power-domains   Aswin Murugan
• [PATCH v6 5/5] configs: qcom: Add QCOM_POWER_DOMAIN config   Aswin Murugan
• [PATCH] boot: Assure FDT is always at 8-byte aligned address   Marek Vasut
  • [PATCH] boot: Assure FDT is always at 8-byte aligned address   Simon Glass
    • [PATCH] boot: Assure FDT is always at 8-byte aligned address   Marek Vasut
      • [PATCH] boot: Assure FDT is always at 8-byte aligned address   Simon Glass
      • [PATCH] boot: Assure FDT is always at 8-byte aligned address   Marek Vasut
      • [PATCH] boot: Assure FDT is always at 8-byte aligned address   Simon Glass
      • [PATCH] boot: Assure FDT is always at 8-byte aligned address   Marek Vasut
      • [PATCH] boot: Assure FDT is always at 8-byte aligned address   Simon Glass
      • [PATCH] boot: Assure FDT is always at 8-byte aligned address   Marek Vasut
      • [PATCH] boot: Assure FDT is always at 8-byte aligned address   Simon Glass
• [PATCH] arm: qemu: Eliminate fdt_high and initrd_high misuse   Marek Vasut
  • [PATCH] arm: qemu: Eliminate fdt_high and initrd_high misuse   Tom Rini
• [PATCH] efi_loader: Assure fitImage from capsule is used from 8-byte aligned address   Marek Vasut
  • Re: [PATCH] efi_loader: Assure fitImage from capsule is used from 8-byte aligned address   Heinrich Schuchardt
  • [PATCH] efi_loader: Assure fitImage from capsule is used from 8-byte aligned address   Ilias Apalodimas
    • [PATCH] efi_loader: Assure fitImage from capsule is used from 8-byte aligned address   Heinrich Schuchardt
    • [PATCH] efi_loader: Assure fitImage from capsule is used from 8-byte aligned address   Marek Vasut
      • [PATCH] efi_loader: Assure fitImage from capsule is used from 8-byte aligned address   Ilias Apalodimas
      • [PATCH] efi_loader: Assure fitImage from capsule is used from 8-byte aligned address   Marek Vasut
      • [PATCH] efi_loader: Assure fitImage from capsule is used from 8-byte aligned address   Ilias Apalodimas
      • [PATCH] efi_loader: Assure fitImage from capsule is used from 8-byte aligned address   Marek Vasut
      • [PATCH] efi_loader: Assure fitImage from capsule is used from 8-byte aligned address   Ilias Apalodimas
• [PATCH] MIPS: Assure end of U-Boot is at 8-byte aligned offset   Marek Vasut
• [PATCH 1/2] sandbox: Fix DT compiler address warnings in sandbox DTs   Marek Vasut
  • [PATCH 2/2] sandbox: Fix DT compiler pin warnings in sandbox DTs   Marek Vasut
    • [PATCH 2/2] sandbox: Fix DT compiler pin warnings in sandbox DTs   Heiko Schocher
    • [PATCH 2/2] sandbox: Fix DT compiler pin warnings in sandbox DTs   Mattijs Korpershoek
  • [PATCH 1/2] sandbox: Fix DT compiler address warnings in sandbox DTs   Heiko Schocher
  • [PATCH 1/2] sandbox: Fix DT compiler address warnings in sandbox DTs   Mattijs Korpershoek
• [PATCH v2] test/py: Use aligned address for overlays in 'extension' test   Marek Vasut
  • [PATCH v2] test/py: Use aligned address for overlays in 'extension' test   Tom Rini
  • [PATCH v2] test/py: Use aligned address for overlays in 'extension' test   Mattijs Korpershoek
• [PATCH 0/3] Synchronize DTC to 1.7.2   Marek Vasut
  • [PATCH 1/3] dm: core: Check ofnode_to_offset() return value   Marek Vasut
    • [PATCH 1/3] dm: core: Check ofnode_to_offset() return value   Simon Glass
      • [PATCH 1/3] dm: core: Check ofnode_to_offset() return value   Marek Vasut
      • [PATCH 1/3] dm: core: Check ofnode_to_offset() return value   Simon Glass
      • [PATCH 1/3] dm: core: Check ofnode_to_offset() return value   Marek Vasut
      • [PATCH 1/3] dm: core: Check ofnode_to_offset() return value   Tom Rini
      • [PATCH 1/3] dm: core: Check ofnode_to_offset() return value   Marek Vasut
      • [PATCH 1/3] dm: core: Check ofnode_to_offset() return value   Tom Rini
      • [PATCH 1/3] dm: core: Check ofnode_to_offset() return value   Marek Vasut
      • [PATCH 1/3] dm: core: Check ofnode_to_offset() return value   Tom Rini
  • [PATCH 2/3] scripts/dtc: Update to upstream version v1.7.2-35-g52f07dcca47c   Marek Vasut
  • [PATCH 3/3] libfdt: Check fdt_offset_ptr() return value unconditionally   Marek Vasut
    • [PATCH 3/3] libfdt: Check fdt_offset_ptr() return value unconditionally   Simon Glass
      • [PATCH 3/3] libfdt: Check fdt_offset_ptr() return value unconditionally   Marek Vasut
      • [PATCH 3/3] libfdt: Check fdt_offset_ptr() return value unconditionally   Simon Glass
      • [PATCH 3/3] libfdt: Check fdt_offset_ptr() return value unconditionally   Marek Vasut
  • [PATCH 0/3] Synchronize DTC to 1.7.2   Tom Rini
    • [PATCH 0/3] Synchronize DTC to 1.7.2   Marek Vasut
      • [PATCH 0/3] Synchronize DTC to 1.7.2   Tom Rini
      • [PATCH 0/3] Synchronize DTC to 1.7.2   Simon Glass
      • [PATCH 0/3] Synchronize DTC to 1.7.2   Marek Vasut
      • [PATCH 0/3] Synchronize DTC to 1.7.2   Tom Rini
      • [PATCH 0/3] Synchronize DTC to 1.7.2   Marek Vasut
      • [PATCH 0/3] Synchronize DTC to 1.7.2   Tom Rini
      • [PATCH 0/3] Synchronize DTC to 1.7.2   Marek Vasut
      • [PATCH 0/3] Synchronize DTC to 1.7.2   Tom Rini
      • [PATCH 0/3] Synchronize DTC to 1.7.2   Marek Vasut
    • [PATCH 0/3] Synchronize DTC to 1.7.2   Tom Rini
• [PATCH] boot: Warn users about fdt_high=~0 usage   Marek Vasut
  • [PATCH] boot: Warn users about fdt_high=~0 usage   Tom Rini
    • [PATCH] boot: Warn users about fdt_high=~0 usage   Marek Vasut
      • [PATCH] boot: Warn users about fdt_high=~0 usage   Tom Rini
      • [PATCH] boot: Warn users about fdt_high=~0 usage   Marek Vasut
      • [PATCH] boot: Warn users about fdt_high=~0 usage   Tom Rini
      • [PATCH] boot: Warn users about fdt_high=~0 usage   Marek Vasut
• [PATCH] board: tbs2910: Disable EFI partition, MP, sysboot, bind commands   Marek Vasut
  • [PATCH] board: tbs2910: Disable EFI partition, MP, sysboot, bind commands   Sören Moch
    • [PATCH] board: tbs2910: Disable EFI partition, MP, sysboot, bind commands   Marek Vasut
      • [PATCH] board: tbs2910: Disable EFI partition, MP, sysboot, bind commands   Soeren Moch
      • [PATCH] board: tbs2910: Disable EFI partition, MP, sysboot, bind commands   Marek Vasut
• [PATCH] imx91: fix pinmux macros for ENET1_TD3 and I2C2_SCL   Francesco Valla
  • [PATCH] imx91: fix pinmux macros for ENET1_TD3 and I2C2_SCL   Fabio Estevam
  • [PATCH] imx91: fix pinmux macros for ENET1_TD3 and I2C2_SCL   Fabio Estevam
• [PATCH 1/5] ARM: dts: Add stm32mp257f-dk-u-boot.dtsi   Patrick DELAUNAY
  • [PATCH 1/5] ARM: dts: Add stm32mp257f-dk-u-boot.dtsi   Patrice CHOTARD
• [PATCH 2/5] ARM: dts: Fix "arm,smc-id" value for stm32mp23-u-boot.dtsi   Patrick DELAUNAY
  • [PATCH 2/5] ARM: dts: Fix "arm,smc-id" value for stm32mp23-u-boot.dtsi   Patrice CHOTARD
• [PATCH 3/5] ARM: dts: Fix "arm,smc-id" value for stm32mp25-u-boot.dtsi   Patrick DELAUNAY
  • [PATCH 3/5] ARM: dts: Fix "arm,smc-id" value for stm32mp25-u-boot.dtsi   Patrice CHOTARD
• [PATCH 4/5] ARM: dts: Add txbyteclk clock in stm32mp235f-dk-u-boot.dtsi   Patrick DELAUNAY
  • [PATCH 4/5] ARM: dts: Add txbyteclk clock in stm32mp235f-dk-u-boot.dtsi   Patrice CHOTARD
• [PATCH 5/5] stm32mp: Add stm32mp23 support for syscon driver   Patrick DELAUNAY
  • [PATCH 5/5] stm32mp: Add stm32mp23 support for syscon driver   Patrice CHOTARD
• [PATCH v1 1/3] adc: stm32mp13: add support of adc to stm32mp13   Patrick DELAUNAY
  • [PATCH v1 1/3] adc: stm32mp13: add support of adc to stm32mp13   Patrice CHOTARD
• [PATCH v1 2/3] configs: stm32: Enable ADC support for stm32mp13_defconfig   Patrick DELAUNAY
• [PATCH v1 3/3] ARM: dts: Add st,adc_usb_pd property for stm32mp135-dk-u-boot   Patrick DELAUNAY
• [PATCH] Dockerfile: Include python3-tk for FATtools   Tom Rini
  • [PATCH] Dockerfile: Include python3-tk for FATtools   Marek Vasut
    • [PATCH] Dockerfile: Include python3-tk for FATtools   Tom Rini
• [PATCHv2] Dockerfile: Include python3-tk for FATtools   Tom Rini
  • [PATCHv2] Dockerfile: Include python3-tk for FATtools   Marek Vasut
  • [PATCHv2] Dockerfile: Include python3-tk for FATtools   Tom Rini
• [PATCH v2] pinctrl: bcm283x: Add GPIO pull-up/down control for BCM2835 and BCM2711   Cibil Pankiras
  • [PATCH v2] pinctrl: bcm283x: Add GPIO pull-up/down control for BCM2835 and BCM2711   Matthias Brugger
    • [PATCH v2] pinctrl: bcm283x: Add GPIO pull-up/down control for BCM2835 and BCM2711   Cibil Pankiras
      • [PATCH v2] pinctrl: bcm283x: Add GPIO pull-up/down control for BCM2835 and BCM2711   Peter Robinson
• [PATCH v1] configs: qcom_defconfig: Configure USB gadget for fastboot support   Balaji Selvanathan
• [PATCH v1 0/3] Enable USB High-Speed support for QCS615   Balaji Selvanathan
  • [PATCH v1 1/3] arm: dts: qcs615-ride: Remove unsupported USB clock reference   Balaji Selvanathan
  • [PATCH v1 2/3] clk: qcom: qcs615: Add GCC_AHB2PHY_WEST_CLK clock support   Balaji Selvanathan
    • [PATCH v1 2/3] clk: qcom: qcs615: Add GCC_AHB2PHY_WEST_CLK clock support   neil.armstrong at linaro.org
  • [PATCH v1 3/3] phy: qcom: qusb2: Add QCS615 QUSB2 PHY support   Balaji Selvanathan
    • [PATCH v1 3/3] phy: qcom: qusb2: Add QCS615 QUSB2 PHY support   neil.armstrong at linaro.org
• [PATCH v1] dts: qcs6490-rb3gen2: Switch USB controller to peripheral mode   Balaji Selvanathan
• [PATCH] arm64: dts: rockchip: align bindings to PCIe spec   Shawn Lin
  • [PATCH] arm64: dts: rockchip: align bindings to PCIe spec   Geraldo Nascimento
  • [PATCH] arm64: dts: rockchip: align bindings to PCIe spec   Geraldo Nascimento
    • [PATCH] arm64: dts: rockchip: align bindings to PCIe spec   Shawn Lin
      • [PATCH] arm64: dts: rockchip: align bindings to PCIe spec   Geraldo Nascimento
• [PATCH 0/7] efi_selftest: expose runtime table address   Heinrich Schuchardt
  • [PATCH 1/7] efi_selftest: expose runtime table address   Heinrich Schuchardt
    • [PATCH 1/7] efi_selftest: expose runtime table address   Ilias Apalodimas
  • [PATCH 2/7] efi_selftest: simplify efi_selftest_reset   Heinrich Schuchardt
    • [PATCH 2/7] efi_selftest: simplify efi_selftest_reset   Ilias Apalodimas
  • [PATCH 3/7] efi_selftest: simplify efi_selftest_rtc   Heinrich Schuchardt
    • [PATCH 3/7] efi_selftest: simplify efi_selftest_rtc   Ilias Apalodimas
  • [PATCH 4/7] efi_selftest: simplify efi_selftest_set_virtual_address_map   Heinrich Schuchardt
  • [PATCH 5/7] efi_selftest: simplify efi_st_query_variable_common   Heinrich Schuchardt
  • [PATCH 6/7] efi_selftest: simplify efi_selftest_variables   Heinrich Schuchardt
  • [PATCH 7/7] efi_selftest: simplify efi_selftest_variables_runtime   Heinrich Schuchardt
• [PATCH 1/1] usb: USB_EHCI_PCI depends on PCI && USB_EHCI_HCD   Heinrich Schuchardt
  • [PATCH 1/1] usb: USB_EHCI_PCI depends on PCI && USB_EHCI_HCD   Marek Vasut
• How to boot u-boot from embedded ELF file in Microblaze core   Álvaro G. M.
  • How to boot u-boot from embedded ELF file in Microblaze core   Álvaro G. M.
    • How to boot u-boot from embedded ELF file in Microblaze core   Michal Simek
• [PATCH v2 01/26] arm: socfpga: agilex5: Add new driver model for system manager in Agilex5   Jan Kiszka
  • [PATCH v2 01/26] arm: socfpga: agilex5: Add new driver model for system manager in Agilex5   Chee, Tien Fong
    • [PATCH v2 01/26] arm: socfpga: agilex5: Add new driver model for system manager in Agilex5   Jan Kiszka
      • [PATCH v2 01/26] arm: socfpga: agilex5: Add new driver model for system manager in Agilex5   Chee, Tien Fong
• [PATCH v4] Altera SoCFpga Boot Stall Fix   Chee, Tien Fong
  • [PATCH v4] Altera SoCFpga Boot Stall Fix   Sune Brian
    • [PATCH v4] Altera SoCFpga Boot Stall Fix   Chee, Tien Fong
      • [PATCH v4] Altera SoCFpga Boot Stall Fix   Sune Brian
      • [PATCH v4] Altera SoCFpga Boot Stall Fix   Sune Brian
      • [PATCH v4] Altera SoCFpga Boot Stall Fix   Tom Rini
      • [PATCH v4] Altera SoCFpga Boot Stall Fix   Chee, Tien Fong
      • [PATCH v4] Altera SoCFpga Boot Stall Fix   Jan Kiszka
      • [PATCH v4] Altera SoCFpga Boot Stall Fix   Sune Brian
      • [PATCH v4] Altera SoCFpga Boot Stall Fix   Chee, Tien Fong
      • [PATCH v4] Altera SoCFpga Boot Stall Fix   Jan Kiszka
  • [PATCH v4] Altera SoCFpga Boot Stall Fix   Sune Brian
• [PATCH] power: domain: ti: fix ti_pd_get() to return after verifying transition   Siddharth Vadapalli
  • [PATCH] power: domain: ti: fix ti_pd_get() to return after verifying transition   Siddharth Vadapalli
    • [PATCH] power: domain: ti: fix ti_pd_get() to return after verifying transition   Siddharth Vadapalli
• [PATCH] arch: arm: mach-socfpga: Fix non-Agilex targets   Jan Kiszka
  • [PATCH] arch: arm: mach-socfpga: Fix non-Agilex targets   Chee, Tien Fong
• [PATCH] arm: imx: imx8m: soc: Add support for 'boot_device' and 'boot_instance' environment variables   William MARTIN
• [PATCH 1/1] .mailmap: add Raymond Mao   Heinrich Schuchardt
  • [PATCH 1/1] .mailmap: add Raymond Mao   Tom Rini
• [PATCH] phy: qcom: snps-femto-v2: assert reset in probe   Casey Connolly
  • [PATCH] phy: qcom: snps-femto-v2: assert reset in probe   Neil Armstrong
• [PATCH v2] power: domain: ti: fix ti_pd_get() to return after verifying transition   Siddharth Vadapalli
  • [PATCH v2] power: domain: ti: fix ti_pd_get() to return after verifying transition   Siddharth Vadapalli
• [PATCH 0/2] Add support for two RTCs   Michael Walle
  • [PATCH 1/2] drivers: rtc: add PCF85063 support   Michael Walle
    • [PATCH 1/2] drivers: rtc: add PCF85063 support   Tom Rini
      • [PATCH 1/2] drivers: rtc: add PCF85063 support   Michael Walle
      • [PATCH 1/2] drivers: rtc: add PCF85063 support   Tom Rini
  • [PATCH 2/2] drivers: rtc: add RV3032 support   Michael Walle
• [PATCH v3 0/5] android: add bootconfig support   Guillaume La Roque (TI.com)
  • [PATCH v3 1/5] boot: android: import addBootConfigParameters() from AOSP   Guillaume La Roque (TI.com)
  • [PATCH v3 2/5] boot: android: Add sandbox memory mapping support   Guillaume La Roque (TI.com)
    • [PATCH v3 2/5] boot: android: Add sandbox memory mapping support   Simon Glass
      • [PATCH v3 2/5] boot: android: Add sandbox memory mapping support   Guillaume La Roque
  • [PATCH v3 3/5] boot: android: Add bootconfig support   Guillaume La Roque (TI.com)
    • [PATCH v3 3/5] boot: android: Add bootconfig support   Simon Glass
      • [PATCH v3 3/5] boot: android: Add bootconfig support   Guillaume La Roque
  • [PATCH v3 4/5] cmd: abootimg: Add 'get ramdisk' command   Guillaume La Roque (TI.com)
    • [PATCH v3 4/5] cmd: abootimg: Add 'get ramdisk' command   Simon Glass
      • [PATCH v3 4/5] cmd: abootimg: Add 'get ramdisk' command   Guillaume La Roque
  • [PATCH v3 5/5] test: abootimg: Add test for bootconfig handling   Guillaume La Roque (TI.com)
• [PATCH 0/6] Restore boot for STM32MP13/STM32MP2 board family   Patrice Chotard
• [PATCH 1/6] clk: scmi: Fix typo scmi_clk_get_attibute   Patrice Chotard
• [PATCH 2/6] clk: scmi: Force call of scmi_clk_get_attribute() during probe   Patrice Chotard
  • [PATCH 2/6] clk: scmi: Force call of scmi_clk_get_attribute() during probe   Marek Vasut
    • [PATCH 2/6] clk: scmi: Force call of scmi_clk_get_attribute() during probe   Patrice CHOTARD
      • [PATCH 2/6] clk: scmi: Force call of scmi_clk_get_attribute() during probe   Marek Vasut
• [PATCH 3/6] configs: stm32mp13: Enable CLK_SCMI_FORCE_ATTRIBUTE   Patrice Chotard
• [PATCH 4/6] configs: stm32mp13: Increase SYS_MALLOC_F_LEN   Patrice Chotard
• [PATCH 5/6] configs: stm32mp23: Enable CLK_SCMI_FORCE_ATTRIBUTE   Patrice Chotard
• [PATCH 6/6] configs: stm32mp25: Enable CLK_SCMI_FORCE_ATTRIBUTE   Patrice Chotard
• [PATCH v5] Altera SoCFpga Boot Stall Fix   Brian Sune
  • [PATCH v5] Altera SoCFpga Boot Stall Fix   Chee, Tien Fong
• [PATCH v2 0/3] stm32mp13: Add ADC support and USB power delivery check   Patrice Chotard
  • [PATCH v2 1/3] adc: stm32mp13: add support of adc to stm32mp13   Patrice Chotard
  • [PATCH v2 2/3] configs: stm32: Enable ADC support for stm32mp13_defconfig   Patrice Chotard
  • [PATCH v2 3/3] ARM: dts: Add st, adc_usb_pd property for stm32mp135-dk-u-boot   Patrice Chotard
• [PATCH 00/23] stm32: Update led management for STMicroelectronics boards   Patrice Chotard
  • [PATCH 10/23] configs: stm32: Enable LED config flags for stm32h747-disco   Patrice Chotard
  • [PATCH 12/23] configs: stm32mp15: Enable LED_BOOT for stm32mp15_defconfig   Patrice Chotard
  • [PATCH 13/23] configs: stm32mp15: Enable LED_BOOT for stm32mp15_basic_defconfig   Patrice Chotard
  • [PATCH 14/23] configs: stm32mp15: Enable LED_BOOT for stm32mp15_trusted_defconfig   Patrice Chotard
  • [PATCH 15/23] configs: stm32mp2: Enable LED_BOOT for stm32mp25_defconfig   Patrice Chotard
  • [PATCH 16/23] configs: stm32mp2: Enable LED_BOOT for stm32mp23_defconfig   Patrice Chotard
  • [PATCH 17/23] ARM: dts: stm32: Drop "u-boot-led" and "error-led" from stm32mp135f-dk-u-boot   Patrice Chotard
  • [PATCH 18/23] ARM: dts: stm32: Drop "u-boot-led" and "error-led" from stm32mp157a-dk1-scmi-u-boot   Patrice Chotard
  • [PATCH 19/23] ARM: dts: stm32: Drop "u-boot-led" and "error-led" from stm32mp157a-dk1-u-boot   Patrice Chotard
  • [PATCH 20/23] ARM: dts: stm32: Drop "u-boot-led" and "error-led" from stm32mp157c-ed1-scmi-u-boot   Patrice Chotard
  • [PATCH 21/23] ARM: dts: stm32: Drop "u-boot-led" and "error-led" from stm32mp157c-ed1-u-boot   Patrice Chotard
  • [PATCH 22/23] ARM: dts: stm32: Drop "u-boot-led" from stm32mp235f-dk-u-boot   Patrice Chotard
  • [PATCH 23/23] ARM: dts: stm32: Drop "u-boot-led" from stm32mp257f-ev1-u-boot   Patrice Chotard
• [PATCH 01/23] board: st: Drop old LED code from stm32f429-disco   Patrice Chotard
• [PATCH 02/23] board: st: Update LED management for stm32mp1   Patrice Chotard
• [PATCH 03/23] board: st: Update LED management for stm32mp2   Patrice Chotard
• [PATCH 04/23] configs: stm32: Enable LED config flags for stm32f429-disco   Patrice Chotard
• [PATCH 05/23] configs: stm32: Enable LED config flags for stm32f429-disco   Patrice Chotard
• [PATCH 06/23] configs: stm32: Enable LED config flags for stm32f746-disco   Patrice Chotard
• [PATCH 07/23] configs: stm32: Enable LED config flags for stm32f769-disco   Patrice Chotard
• [PATCH 08/23] configs: stm32: Enable LED config flags for stm32h743-disco   Patrice Chotard
• [PATCH 09/23] configs: stm32: Enable LED config flags for stm32h743-eval   Patrice Chotard
• [PATCH 11/23] configs: stm32mp13: Enable LED_BOOT for stm32mp13_defconfig   Patrice Chotard
• [PATCH 1/1] configs: enable PREBOOT, CMD_ENV_ERASE on Rock Pi 4A   Heinrich Schuchardt
  • [PATCH 1/1] configs: enable PREBOOT, CMD_ENV_ERASE on Rock Pi 4A   Jonas Karlman
• [PATCH v3 2/7] video: simple_panel: add support for "panel-lvds" display   Patrice CHOTARD
• [PATCH v3 7/7] configs: stm32mp25: enable LVDS display support   Patrice CHOTARD
• [PATCH v3 3/7] video: stm32: STM32 driver support for LVDS   Patrice CHOTARD
• [PATCH v3 4/7] video: stm32: ltdc: support new hardware version for STM32MP25 SoC   Patrice CHOTARD
• [PATCH v3 5/7] video: stm32: ltdc: properly search the first available panel   Patrice CHOTARD
• [PATCH v3 6/7] ARM: dts: stm32: use LTDC and LVDS nodes before relocation in stm32mp25-u-boot   Patrice CHOTARD
  • [PATCH v3 6/7] ARM: dts: stm32: use LTDC and LVDS nodes before relocation in stm32mp25-u-boot   Patrice CHOTARD
    • [Uboot-stm32] [PATCH v3 6/7] ARM: dts: stm32: use LTDC and LVDS nodes before relocation in stm32mp25-u-boot   Patrice CHOTARD
• [PATCH v4 1/5] smbios: Fix duplicated smbios handles   Raymond Mao
  • [PATCH v4 2/5] smbios: add support for dynamic generation of Type 9 system slot tables   Raymond Mao
    • [PATCH v4 2/5] smbios: add support for dynamic generation of Type 9 system slot tables   Heinrich Schuchardt
  • [PATCH v4 3/5] smbios: add support for dynamic generation of Type 16 table   Raymond Mao
  • [PATCH v4 4/5] smbios: add support for dynamic generation of Type 17 table   Raymond Mao
    • [PATCH v4 4/5] smbios: add support for dynamic generation of Type 17 table   Heinrich Schuchardt
    • [PATCH v4 4/5] smbios: add support for dynamic generation of Type 17 table   Heinrich Schuchardt
  • [PATCH v4 5/5] smbios: add support for dynamic generation of Type 19 table   Raymond Mao
  • [PATCH v4 1/5] smbios: Fix duplicated smbios handles   Tom Rini
• [PATCH 0/4] Fixes for CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION* and for SOCFPGA   Jan Kiszka
  • [PATCH 1/4] spl: mmc: Respect sector value passed to mmc_load_image_raw_partition   Jan Kiszka
    • [PATCH 1/4] spl: mmc: Respect sector value passed to mmc_load_image_raw_partition   Marek Vasut
      • [PATCH 1/4] spl: mmc: Respect sector value passed to mmc_load_image_raw_partition   Jan Kiszka
  • [PATCH 2/4] spl: mmc: Account for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE being a choice   Jan Kiszka
    • [PATCH 2/4] spl: mmc: Account for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE being a choice   Chee, Tien Fong
      • [PATCH 2/4] spl: mmc: Account for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE being a choice   Jan Kiszka
      • [PATCH 2/4] spl: mmc: Account for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE being a choice   Chee, Tien Fong
    • [PATCH 2/4] spl: mmc: Account for SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE being a choice   Marek Vasut
  • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Jan Kiszka
    • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Chee, Tien Fong
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Sune Brian
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Jan Kiszka
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Sune Brian
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Jan Kiszka
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Sune Brian
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Jan Kiszka
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Sune Brian
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Jan Kiszka
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Sune Brian
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Jan Kiszka
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Sune Brian
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Chee, Tien Fong
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Sune Brian
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Jan Kiszka
    • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Marek Vasut
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Jan Kiszka
      • [PATCH 3/4] arch: arm: mach-socfpga: Adjust a raw sectors for MMC loading of U-Boot from SPL   Marek Vasut
  • [PATCH 4/4] configs: socfpga: Fix de0_nano_soc boot   Jan Kiszka
• [PATCH] configs: socfpga: Permit EFI booting   Jan Kiszka
• [u-boot-test-hooks][PATCH] labgrid: sunxi: Add writer using write-image   Tom Rini
• [PATCH] rpi4: Fix compilation with larger configs   Ilias Apalodimas
  • [PATCH] rpi4: Fix compilation with larger configs   Peter Robinson
• [DEBUG] U-Boot SDRAM Calibration breaks and unstable   Sune Brian
  • [DEBUG] U-Boot SDRAM Calibration breaks and unstable   Sune Brian
• [PATCH v2 1/1] usb: USB_EHCI_PCI depends on PCI   Heinrich Schuchardt
  • [PATCH v2 1/1] usb: USB_EHCI_PCI depends on PCI   Marek Vasut
• Please pull u-boot-i2c master   Heiko Schocher
  • Please pull u-boot-i2c master   Tom Rini
• [PATCH v2] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Adriana Nicolae
  • [PATCH v2] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Heinrich Schuchardt
• [PATCH v1] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Brian Sune
  • [PATCH v1] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
    • [PATCH v1] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Quentin Schulz
      • [PATCH v1] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
      • [PATCH v1] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Quentin Schulz
      • [PATCH v1] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
      • [PATCH v1] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
      • [PATCH v1] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
      • [PATCH v1] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
      • [PATCH v1] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Quentin Schulz
      • [PATCH v1] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
• Pull request efi-2026-01-rc3 for branch master   Heinrich Schuchardt
  • Pull request efi-2026-01-rc3 for branch master   Tom Rini
• `usb start` freezes friendlyelec CM3588 Plus NAS board   Krumelmonster
  • `usb start` freezes friendlyelec CM3588 Plus NAS board   Jonas Karlman
    • `usb start` freezes friendlyelec CM3588 Plus NAS board   Krumelmonster
• [PATCH] xtensa: Assure end of U-Boot is at 8-byte aligned offset   Marek Vasut
• [PATCH] xtensa: Fix big endian build   Marek Vasut
• [PATCH] rockchip: rk3588: Map SCMI shared memory area as non-cacheable   Jonas Karlman
  • [PATCH] rockchip: rk3588: Map SCMI shared memory area as non-cacheable   Marek Vasut
  • [PATCH] rockchip: rk3588: Map SCMI shared memory area as non-cacheable   Peter Robinson
    • [PATCH] rockchip: rk3588: Map SCMI shared memory area as non-cacheable   Jonas Karlman
  • [PATCH] rockchip: rk3588: Map SCMI shared memory area as non-cacheable   Kever Yang
  • [PATCH] rockchip: rk3588: Map SCMI shared memory area as non-cacheable   Tom Rini
• [PATCH 1/1] cmd: smbios: correct output for table type 4   Heinrich Schuchardt
  • [PATCH 1/1] cmd: smbios: correct output for table type 4   Raymond Mao
    • [PATCH 1/1] cmd: smbios: correct output for table type 4   Heinrich Schuchardt
      • [PATCH 1/1] cmd: smbios: correct output for table type 4   Raymond Mao
      • [PATCH 1/1] cmd: smbios: correct output for table type 4   Heinrich Schuchardt
• [PATCH 1/1] boot: pxe_utils: avoid illegal memory access   Heinrich Schuchardt
  • [PATCH 1/1] boot: pxe_utils: avoid illegal memory access   Kory Maincent
• [PATCH 1/1] cmd/extension: avoid NULL pointer dereference   Heinrich Schuchardt
  • [PATCH 1/1] cmd/extension: avoid NULL pointer dereference   Kory Maincent
    • [PATCH 1/1] cmd/extension: avoid NULL pointer dereference   Kory Maincent
  • [PATCH 1/1] cmd/extension: avoid NULL pointer dereference   Tom Rini
• [PATCH v3 2/4] rockchip: Add support for RAM boot from maskrom mode   Kever Yang
• [PATCH v3 3/4] rockchip: sdram: Add fallback that fixup DRAM gaps on RK3588   Kever Yang
• [PATCH v2 1/2] rockchip: sdram: Add rockchip_sdram_type() helper   Kever Yang
• [PATCH v2 2/2] rockchip: rock5b-rk3588: Add support for ROCK 5B+   Kever Yang
• [PATCH 00/11] sunxi: Add support for A733 SoC   Yixun Lan
  • [PATCH 01/11] sunxi: sun60i: initial support for A733 SoC   Yixun Lan
  • [PATCH 02/11] sunxi: a733: config TF-A load address   Yixun Lan
    • [PATCH 02/11] sunxi: a733: config TF-A load address   Andre Przywara
  • [PATCH 03/11] sunxi: spl: a733: config text and stack address   Yixun Lan
  • [PATCH 04/11] sunxi: a733: uart: setup serial console   Yixun Lan
    • [PATCH 04/11] sunxi: a733: uart: setup serial console   Andre Przywara
      • [PATCH 04/11] sunxi: a733: uart: setup serial console   Yixun Lan
  • [PATCH 05/11] clock: a733: implement support for mmc/uart   Yixun Lan
    • [PATCH 05/11] clock: a733: implement support for mmc/uart   Andre Przywara
  • [PATCH 06/11] clock: reset: a733: add initial support   Yixun Lan
  • [PATCH 07/11] gpio: a733: add initial support   Yixun Lan
  • [PATCH 08/11] pinctrl: sunxi: a733: add initial support   Yixun Lan
    • [PATCH 08/11] pinctrl: sunxi: a733: add initial support   Andre Przywara
  • [PATCH 09/11] sunxi: i2c: add support for A733   Yixun Lan
  • [PATCH 10/11] pmu: axp318w: implement pmic/regulator support   Yixun Lan
    • [PATCH 10/11] pmu: axp318w: implement pmic/regulator support   Andre Przywara
  • [PATCH 11/11] sunxi: mmc: enable support for A733   Yixun Lan
  • [PATCH 00/11] sunxi: Add support for A733 SoC   Andre Przywara
• [PATCH] arm: stm32mp25: add ethernet support for stm32mp255 series   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Fix STM32MP15xx DHSOM boot breakage due to ETZPC   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Keep the reg11 and reg18 regulators always enabled on STM32MP13xx DHCOR   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Introduce DH STM32MP13x target   Patrice CHOTARD
• [PATCH] ARM: stm32: Add missing build of ST DFU virt code on DH STM32MP1 DHSOM   Patrice CHOTARD
• [PATCH 1/3] board: dhelectronics: Move dh_add_item_number_and_serial_to_env() to common code   Patrice CHOTARD
• [PATCH 2/3] ARM: stm32: Read values from M24256 write-lockable page on STM32MP13xx DHCOR   Patrice CHOTARD
• [PATCH 3/3] ARM: stm32: Add MAC address readout from fuses on DH STM32MP1 DHSOM   Patrice CHOTARD
• [PATCH] FPGA2SDRAM setup fix   Chee, Tien Fong
• [PULL] Pull request for u-boot master / v2026.01 = u-boot-stm32-20251117   Patrice CHOTARD
  • [PULL] Pull request for u-boot master / v2026.01 = u-boot-stm32-20251117   Tom Rini
    • [PULL] Pull request for u-boot master / v2026.01 = u-boot-stm32-20251117   Patrice CHOTARD
    • [PULL] Pull request for u-boot master / v2026.01 = u-boot-stm32-20251117   Tom Rini
• [PATCH v1] configs: agilex5: Enable FAT-based environment storage in defconfig   Chee, Tien Fong
• [PATCH v2] Cyclone V Board handsoff script   Chee, Tien Fong
• [PATCH] bus: ti-sysc: select CLK_TI_CTRL driver   yegorslists at googlemail.com
• [PATCH v1] arm: dts: imx8ulp: Update device tree to fix boot issue on i.MX8ULP EVK   alice.guo at oss.nxp.com
  • [PATCH v1] arm: dts: imx8ulp: Update device tree to fix boot issue on i.MX8ULP EVK   Fabio Estevam
• [PATCH v2 1/1] spi: cadence: Add driver for xSPI   Chee, Tien Fong
• [PATCH v2 0/2] Add support for two RTCs   Michael Walle
  • [PATCH v2 1/3] drivers: rtc: convert tristate to bool   Michael Walle
    • [PATCH v2 1/3] drivers: rtc: convert tristate to bool   Tom Rini
  • [PATCH v2 2/3] drivers: rtc: add PCF85063 support   Michael Walle
  • [PATCH v2 3/3] drivers: rtc: add RV3032 support   Michael Walle
• [PATCH] ufs: Keep Makefile and Kconfig sorted one more time   Neil Armstrong
• [BUG] Broken USB on StarFive VisionFive 2   Heinrich Schuchardt
  • [BUG] Broken USB on StarFive VisionFive 2   E Shattow
    • [BUG] Broken USB on StarFive VisionFive 2   Heinrich Schuchardt
• [PATCH v3] boot: pxe_utils: Fix memory allocation issues in overlay_dir handling   Kory Maincent
  • [PATCH v3] boot: pxe_utils: Fix memory allocation issues in overlay_dir handling   Surkov Kirill
  • [PATCH v3] boot: pxe_utils: Fix memory allocation issues in overlay_dir handling   Tom Rini
• [PATCH v2] Add support for OpenSSL Provider API   Quentin Schulz
  • [PATCH v2] Add support for OpenSSL Provider API   Eddie Kovsky
• [PATCH v2 0/4] fit: allow signing with an OpenSSL engine   Quentin Schulz
  • [PATCH v2 1/4] fit: support signing with only an engine_id   Quentin Schulz
  • [PATCH v2 2/4] tools: binman: mkimage: add support for passing the engine   Quentin Schulz
    • [PATCH v2 2/4] tools: binman: mkimage: add support for passing the engine   Wolfgang Wallner
    • [PATCH v2 2/4] tools: binman: mkimage: add support for passing the engine   Simon Glass
      • [PATCH v2 2/4] tools: binman: mkimage: add support for passing the engine   Quentin Schulz
      • [PATCH v2 2/4] tools: binman: mkimage: add support for passing the engine   Simon Glass
  • [PATCH v2 3/4] tools: binman: fit: add support for OpenSSL engines   Quentin Schulz
    • [PATCH v2 3/4] tools: binman: fit: add support for OpenSSL engines   Wolfgang Wallner
      • [PATCH v2 3/4] tools: binman: fit: add support for OpenSSL engines   Quentin Schulz
      • [PATCH v2 3/4] tools: binman: fit: add support for OpenSSL engines   Wolfgang Wallner
      • [PATCH v2 3/4] tools: binman: fit: add support for OpenSSL engines   Quentin Schulz
    • [PATCH v2 3/4] tools: binman: fit: add support for OpenSSL engines   Simon Glass
  • [PATCH v2 4/4] tools: binman: fit: add tests for signing with an OpenSSL engine   Quentin Schulz
    • [PATCH v2 4/4] tools: binman: fit: add tests for signing with an OpenSSL engine   Simon Glass
• [PATCH v2] board: ti: am335x: Do not call disabled PMIC functions   Markus Schneider-Pargmann
  • [PATCH v2] board: ti: am335x: Do not call disabled PMIC functions   Maarten Brock
• [PATCH v2] doc: board: starfive: update jh7110 common description   E Shattow
  • [PATCH v2] doc: board: starfive: update jh7110 common description   Heinrich Schuchardt
    • [PATCH v2] doc: board: starfive: update jh7110 common description   Yao Zi
      • [PATCH v2] doc: board: starfive: update jh7110 common description   Heinrich Schuchardt
    • [PATCH v2] doc: board: starfive: update jh7110 common description   E Shattow
• [PATCH] mailmap: Add entry for Sam Protsenko   Sam Protsenko
  • [PATCH] mailmap: Add entry for Sam Protsenko   Tom Rini
• [PATCH v3 0/6] Add support for SM3 secure hash   Heiko Schocher
  • [PATCH v3 3/6] lib: sm3: implement U-Boot parts   Heiko Schocher
    • [PATCH v3 3/6] lib: sm3: implement U-Boot parts   Quentin Schulz
      • [PATCH v3 3/6] lib: sm3: implement U-Boot parts   Heiko Schocher
  • [PATCH v3 0/6] Add support for SM3 secure hash   Ilias Apalodimas
  • [PATCH v3 0/6] Add support for SM3 secure hash   Raymond Mao
    • [PATCH v3 0/6] Add support for SM3 secure hash   Heiko Schocher
      • [PATCH v3 0/6] Add support for SM3 secure hash   Ilias Apalodimas
• [PATCH v3 1/6] lib: Import rol32 function from Linux   Heiko Schocher
• [PATCH v3 2/6] lib: import sm3 256 hash parts from linux   Heiko Schocher
  • [PATCH v3 2/6] lib: import sm3 256 hash parts from linux   Ilias Apalodimas
• [PATCH v3 4/6] test: cmd: hash: add unit test for sm3_256   Heiko Schocher
• [PATCH v3 5/6] tpm2: add sm3 256 hash support   Heiko Schocher
• [PATCH v3 6/6] test: cmd: fix a typo in md5 test   Heiko Schocher
• [PATCH 00/12] sc5xx: Add complete board support for all ADI SC5xx boards   Greg Malysa
  • [PATCH 01/12] mach-sc5xx: Introduce Kconfig symbols for image addresses   Greg Malysa
  • [PATCH 02/12] mach-sc5xx: Rename SC_BOOT_MODE   Greg Malysa
  • [PATCH 03/12] mach-sc5xx: Kconfig: Make EZKIT and EZLITE carriers mutually exclusive   Greg Malysa
  • [PATCH 04/12] mach-sc5xx: Add preliminary support for binman   Greg Malysa
  • [PATCH 05/12] docker: add Analog Devices tools to docker image   Greg Malysa
    • [PATCH 05/12] docker: add Analog Devices tools to docker image   Tom Rini
      • [PATCH 05/12] docker: add Analog Devices tools to docker image   Greg Malysa
      • [PATCH 05/12] docker: add Analog Devices tools to docker image   Tom Rini
  • [PATCH 06/12] board: adi: Add SOMCRR infrastructure   Greg Malysa
  • [PATCH 07/12] board: adi: Add support for SC573-ezkit   Greg Malysa
  • [PATCH 08/12] board: adi: Add support for SC589 boards   Greg Malysa
  • [PATCH 09/12] board: adi: Add support for SC584-ezkit   Greg Malysa
  • [PATCH 10/12] board: adi: Add support for SC598   Greg Malysa
  • [PATCH 11/12] board: adi: Add support for SC594   Greg Malysa
  • [PATCH 12/12] MAINTAINERS: Update ADI entries for new boards   Greg Malysa
  • [PATCH 00/12] sc5xx: Add complete board support for all ADI SC5xx boards   Greg Malysa
• [PATCH v4 0/7] Implement the Generic System Interconnect Subsystem for U-Boot   Neil Armstrong
  • [PATCH v4 1/7] Introduce the Generic System Interconnect Subsystem   Neil Armstrong
  • [PATCH v4 2/7] interconnect: add DM test suite   Neil Armstrong
  • [PATCH v4 3/7] MAINTAINERS: add myself as Maintainer of the Generic System Interconnect Subsystem   Neil Armstrong
  • [PATCH v4 4/7] interconnect: add support for the Qualcomm RPMh helpers   Neil Armstrong
  • [PATCH v4 5/7] interconnect: add support for the SM8650 SoC   Neil Armstrong
  • [PATCH v4 6/7] ufs: qcom: vote for interconnect bandwidth on probe   Neil Armstrong
  • [PATCH v4 7/7] qcom_defconfig: enable interconnect for SM8650   Neil Armstrong
• [PATCH 00/15] arm: am335x: Switch to upstream devicetree   Markus Schneider-Pargmann (TI.com)
  • [PATCH 01/15] board: ti: am335x: Fix DM_TPS65910 condition   Markus Schneider-Pargmann (TI.com)
  • [PATCH 02/15] arm: dts: am335x-evm: Add backlight to the panel   Markus Schneider-Pargmann (TI.com)
    • [PATCH 02/15] arm: dts: am335x-evm: Add backlight to the panel   Kory Maincent
      • [PATCH 02/15] arm: dts: am335x-evm: Add backlight to the panel   Markus Schneider-Pargmann
      • [PATCH 02/15] arm: dts: am335x-evm: Add backlight to the panel   Kory Maincent
  • [PATCH 03/15] arm: omap2plus: Select REGMAP   Markus Schneider-Pargmann (TI.com)
    • [PATCH 03/15] arm: omap2plus: Select REGMAP   Tom Rini
      • [PATCH 03/15] arm: omap2plus: Select REGMAP   Markus Schneider-Pargmann
      • [PATCH 03/15] arm: omap2plus: Select REGMAP   Tom Rini
  • [PATCH 04/15] configs: am335x_evm_defconfig: Enable panel   Markus Schneider-Pargmann (TI.com)
  • [PATCH 05/15] simple-pm-bus: Make clocks optional   Markus Schneider-Pargmann (TI.com)
    • [PATCH 05/15] simple-pm-bus: Make clocks optional   Kory Maincent
  • [PATCH 06/15] power: domain: Add ti-omap-prm stub   Markus Schneider-Pargmann (TI.com)
  • [PATCH 07/15] arm: dts: am335x-evm-u-boot: Add chosen tick-timer   Markus Schneider-Pargmann (TI.com)
    • [PATCH 07/15] arm: dts: am335x-evm-u-boot: Add chosen tick-timer   Tom Rini
  • [PATCH 08/15] dm: core: Support multiple drivers with same compatibles   Markus Schneider-Pargmann (TI.com)
    • [PATCH 08/15] dm: core: Support multiple drivers with same compatibles   Tom Rini
      • [PATCH 08/15] dm: core: Support multiple drivers with same compatibles   Markus Schneider-Pargmann
      • [PATCH 08/15] dm: core: Support multiple drivers with same compatibles   Tom Rini
      • [PATCH 08/15] dm: core: Support multiple drivers with same compatibles   Marek Vasut
      • [PATCH 08/15] dm: core: Support multiple drivers with same compatibles   Markus Schneider-Pargmann
      • [PATCH 08/15] dm: core: Support multiple drivers with same compatibles   Marek Vasut
      • [PATCH 08/15] dm: core: Support multiple drivers with same compatibles   Markus Schneider-Pargmann
      • [PATCH 08/15] dm: core: Support multiple drivers with same compatibles   Marek Vasut
      • [PATCH 08/15] dm: core: Support multiple drivers with same compatibles   Markus Schneider-Pargmann
      • [PATCH 08/15] dm: core: Support multiple drivers with same compatibles   Simon Glass
  • [PATCH 09/15] usb: musb-new: Relative ctrl_mod address parsing   Markus Schneider-Pargmann (TI.com)
  • [PATCH 10/15] usb: musb-new: Add compatibles for ti,musb-am33xx   Markus Schneider-Pargmann (TI.com)
  • [PATCH 11/15] am33xx: Fix comment about config symbols   Markus Schneider-Pargmann (TI.com)
  • [PATCH 12/15] am33xx: Support upstream devicetree binding   Markus Schneider-Pargmann (TI.com)
  • [PATCH 13/15] video: simple_panel: Add tfc_s9700rtwv43tr_01b   Markus Schneider-Pargmann (TI.com)
  • [PATCH 14/15] video: ti: am335x: Support OF graph   Markus Schneider-Pargmann (TI.com)
  • [PATCH 15/15] configs: am335x_evm_defconfig: Switch to upstream devicetree   Markus Schneider-Pargmann (TI.com)
• [PATCH 15/15] configs: am335x_evm_defconfig: Switch to upstream devicetree   Kory Maincent
  • [PATCH 15/15] configs: am335x_evm_defconfig: Switch to upstream devicetree   Markus Schneider-Pargmann
• [PATCH 01/15] board: ti: am335x: Fix DM_TPS65910 condition   Maarten Brock
  • [PATCH 01/15] board: ti: am335x: Fix DM_TPS65910 condition   Tom Rini
• booti command fdt argument   Manuel Rota
• [PATCH v3] power: domain: ti: fix ti_pd_get() to return after verifying transition   Siddharth Vadapalli
  • [PATCH v3] power: domain: ti: fix ti_pd_get() to return after verifying transition   Hrushikesh Salunke
  • [PATCH v3] power: domain: ti: fix ti_pd_get() to return after verifying transition   Tom Rini
• [PATCH v1] configs: colibri-imx7*: set 'fdtfile' generically in PREBOOT   Ernest Van Hoecke
  • [PATCH v1] configs: colibri-imx7*: set 'fdtfile' generically in PREBOOT   Francesco Dolcini
    • [PATCH v1] configs: colibri-imx7*: set 'fdtfile' generically in PREBOOT   Francesco Dolcini
• [PATCH] adi: Stop disabling device tree relocation   Tom Rini
  • [PATCH] adi: Stop disabling device tree relocation   Greg Malysa
• [PATCH 1/2] bootstd: rauc: Don't check root part filesystem   Leonard Anderweit
  • [PATCH 2/2] bootstd: rauc: Only require partitions for one slot   Leonard Anderweit
  • [PATCH 1/2] bootstd: rauc: Don't check root part filesystem   Tom Rini
• [PATCH v2] configs: colibri-imx7*: set 'fdtfile' generically in PREBOOT   Ernest Van Hoecke
  • [PATCH v2] configs: colibri-imx7*: set 'fdtfile' generically in PREBOOT   Francesco Dolcini
  • [PATCH v2] configs: colibri-imx7*: set 'fdtfile' generically in PREBOOT   Fabio Estevam
• [PATCH] opos6uldev: Stop disabling device tree relocation   Tom Rini
  • [PATCH] opos6uldev: Stop disabling device tree relocation   Sébastien Szymanski
• [PATCH] gw_ventana: Stop disabling device tree relocation   Tom Rini
  • [PATCH] gw_ventana: Stop disabling device tree relocation   Tim Harvey
• [PATCH] imx6dl-sielaff: Stop disabling device tree relocation   Tom Rini
• [PATCH] bk4r1: Stop disabling device tree relocation   Tom Rini
• [PATCH] cl-som-imx7: Stop disabling device tree relocation   Tom Rini
• [PATCH] cm_fx6: Stop disabling device tree relocation   Tom Rini
• [PATCH] dart_6ul: Stop disabling device tree relocation   Tom Rini
• [PATCH] display5: Stop disabling device tree relocation   Tom Rini
  • [PATCH] display5: Stop disabling device tree relocation   Łukasz Majewski
• [PATCH] imx6-engicam: Stop disabling device tree relocation   Tom Rini
• [PATCH] imx6dl-mamoj: Stop disabling device tree relocation   Tom Rini
• [PATCH] kp_imx53: Stop disabling device tree relocation   Tom Rini
  • [PATCH] kp_imx53: Stop disabling device tree relocation   Łukasz Majewski
• [PATCH] kp_imx6q_tpc: Stop disabling device tree relocation   Tom Rini
  • [PATCH] kp_imx6q_tpc: Stop disabling device tree relocation   Łukasz Majewski
• [PATCH] mccmon6: Stop disabling device tree relocation   Tom Rini
  • [PATCH] mccmon6: Stop disabling device tree relocation   Łukasz Majewski
• [PATCH] mx53cx9020: Stop disabling device tree relocation   Tom Rini
• [PATCH] mx6sabre: Stop disabling device tree relocation   Tom Rini
  • [PATCH] mx6sabre: Stop disabling device tree relocation   Peng Fan
• [PATCH] mx6slevk: Stop disabling device tree relocation   Tom Rini
  • [PATCH] mx6slevk: Stop disabling device tree relocation   Peng Fan
• [PATCH] mx6sllevk: Stop disabling device tree relocation   Tom Rini
  • [PATCH] mx6sllevk: Stop disabling device tree relocation   Peng Fan
• [PATCH] mx6sxsabreauto: Stop disabling device tree relocation   Tom Rini
  • [PATCH] mx6sxsabreauto: Stop disabling device tree relocation   Peng Fan
• [PATCH] mx6sxsabresd: Stop disabling device tree relocation   Tom Rini
• [PATCH] mx6ul_14x14_evk: Stop disabling device tree relocation   Tom Rini
  • [PATCH] mx6ul_14x14_evk: Stop disabling device tree relocation   Peng Fan
• [PATCH] mx6ullevk: Stop disabling device tree relocation   Tom Rini
  • [PATCH] mx6ullevk: Stop disabling device tree relocation   Peng Fan
• [PATCH] mx7dsabresd: Stop disabling device tree relocation   Tom Rini
• [PATCH] mx7ulp_com: Stop disabling device tree relocation   Tom Rini
• [PATCH] mx7ulp_evk: Stop disabling device tree relocation   Tom Rini
  • [PATCH] mx7ulp_evk: Stop disabling device tree relocation   Peng Fan
• [PATCH] mys_6ulx: Stop disabling device tree relocation   Tom Rini
• [PATCH] nitrogen6x: Stop disabling device tree relocation   Tom Rini
• [PATCH] novena: Stop disabling device tree relocation   Tom Rini
  • [PATCH] novena: Stop disabling device tree relocation   Marek Vasut
• [PATCH] pico-imx6: Stop disabling device tree relocation   Tom Rini
• [PATCH] pico-imx6ul: Stop disabling device tree relocation   Tom Rini
• [PATCH] pico-imx7d: Stop disabling device tree relocation   Tom Rini
• [PATCH] tqma6: Stop disabling device tree relocation   Tom Rini
  • [PATCH] tqma6: Stop disabling device tree relocation   Max Merchel
• [PATCH] udoo: Stop disabling device tree relocation   Tom Rini
• [PATCH] udoo_neo: Stop disabling device tree relocation   Tom Rini
• [PATCH] wandboard: Stop disabling device tree relocation   Tom Rini
• [PATCH] warp7: Stop disabling device tree relocation   Tom Rini
• [PATCH v2] labgrid: sage: Add new lab   Tom Rini
• [PATCH 0/4] doc: improve C test documentation   Heinrich Schuchardt
  • [PATCH 1/4] doc: make writing DM test subsection of writing C test   Heinrich Schuchardt
    • [PATCH 1/4] doc: make writing DM test subsection of writing C test   Simon Glass
    • [PATCH 1/4] doc: make writing DM test subsection of writing C test   Ilias Apalodimas
  • [PATCH 2/4] test: document ut.h   Heinrich Schuchardt
    • [PATCH 2/4] test: document ut.h   Simon Glass
  • [PATCH 3/4] doc: add include/test/ut.h to HTML documentation   Heinrich Schuchardt
    • [PATCH 3/4] doc: add include/test/ut.h to HTML documentation   Simon Glass
    • [PATCH 3/4] doc: add include/test/ut.h to HTML documentation   Ilias Apalodimas
  • [PATCH 4/4] doc: describe return values of C tests   Heinrich Schuchardt
    • [PATCH 4/4] doc: describe return values of C tests   Simon Glass
    • [PATCH 4/4] doc: describe return values of C tests   Ilias Apalodimas
• [PATCH v2 1/4] Gitlab: Add a "sage-lab" stage to access a board farm   Tom Rini
  • [PATCH v2 2/4] Docker: Add building TF-A for pine64_plus   Tom Rini
  • [PATCH v2 3/4] Gitlab: sage: Add Pine64+ platform   Tom Rini
    • [PATCH v2 3/4] Gitlab: sage: Add Pine64+ platform   Jerome Forissier
      • [PATCH v2 3/4] Gitlab: sage: Add Pine64+ platform   Tom Rini
      • [PATCH v2 3/4] Gitlab: sage: Add Pine64+ platform   Jerome Forissier
      • [PATCH v2 3/4] Gitlab: sage: Add Pine64+ platform   Tom Rini
      • [PATCH v2 3/4] Gitlab: sage: Add Pine64+ platform   Jerome Forissier
  • [PATCH v2 4/4] Gitlab sage, Docker: Add snmp and rsync   Tom Rini
• [PATCH] doc: samsung: Fix PXE doc for E850-96 board   Sam Protsenko
• [PATCH] stm32mp: Fix handling of OPTEE in the middle of DRAM   Marek Vasut
• [PATCH] ARM: stm32: Add missing build of debug UART init code on DH STM32MP1 DHSOM   Marek Vasut
  • [PATCH] ARM: stm32: Add missing build of debug UART init code on DH STM32MP1 DHSOM   Tom Rini
• [PATCH] ARM: dts: stm32: Fix 512 MiB DRAM settings for DH STM32MP13xx DHCOR SoM   Marek Vasut
• [PATCH] ARM: dts: stm32: Add 1 GiB DRAM settings for DH STM32MP13xx DHCOR SoM   Marek Vasut
• [PATCH] mkimage: Add support for bundling TEE in mkimage -f auto   Marek Vasut
  • [PATCH] mkimage: Add support for bundling TEE in mkimage -f auto   Quentin Schulz
    • [PATCH] mkimage: Add support for bundling TEE in mkimage -f auto   Marek Vasut
      • [PATCH] mkimage: Add support for bundling TEE in mkimage -f auto   Quentin Schulz
      • [PATCH] mkimage: Add support for bundling TEE in mkimage -f auto   Marek Vasut
      • [PATCH] mkimage: Add support for bundling TEE in mkimage -f auto   Quentin Schulz
      • [PATCH] mkimage: Add support for bundling TEE in mkimage -f auto   Marek Vasut
• [PATCH v3 0/6] board: samsung: e850-96: Support USB boot   Sam Protsenko
  • [PATCH v3 1/6] board: samsung: e850-96: Keep public functions together   Sam Protsenko
  • [PATCH v3 2/6] board: samsung: e850-96: Add routines for checking boot dev   Sam Protsenko
  • [PATCH v3 3/6] board: samsung: e850-96: Split LDFW loading and init   Sam Protsenko
  • [PATCH v3 4/6] board: samsung: e850-96: Add routine for loading images over USB   Sam Protsenko
  • [PATCH v3 5/6] board: samsung: e850-96: Load firmwares over USB on USB boot   Sam Protsenko
  • [PATCH v3 6/6] board: samsung: e850-96: Enter DFU automatically on USB boot   Sam Protsenko
  • [PATCH v3 0/6] board: samsung: e850-96: Support USB boot   Sam Protsenko
    • [PATCH v3 0/6] board: samsung: e850-96: Support USB boot   Minkyu Kang
• [PATCH] configs: rockchip: Enable RK806 PMIC on rk3588-evb   Chaoyi Chen
  • [PATCH] configs: rockchip: Enable RK806 PMIC on rk3588-evb   Quentin Schulz
    • [PATCH] configs: rockchip: Enable RK806 PMIC on rk3588-evb   Chaoyi Chen
    • [PATCH] configs: rockchip: Enable RK806 PMIC on rk3588-evb   Quentin Schulz
      • [PATCH] configs: rockchip: Enable RK806 PMIC on rk3588-evb   Chaoyi Chen
• [PATCH v2] arm: dts: imx8ulp: Update device tree to fix boot issue on i.MX8ULP EVK   alice.guo at oss.nxp.com
  • [PATCH v2] arm: dts: imx8ulp: Update device tree to fix boot issue on i.MX8ULP EVK   Fabio Estevam
• [PATCH 00/11] mtd: spi-nor: Isolate stacked/parallel support from core   Takahiro Kuwano via B4 Relay
  • [PATCH 01/11] spi: zynqmp-gqspi: Set priv->is_parallel in child_pre_probe()   Takahiro Kuwano via B4 Relay
  • [PATCH 02/11] spi: zynqmp_gqspi: Remove reference to SPI_XFER_LOWER flag.   Takahiro Kuwano via B4 Relay
  • [PATCH 03/11] spi: zynqmp_gqspi: Read two bytes of SR and FSR in parallel mode   Takahiro Kuwano via B4 Relay
  • [PATCH 04/11] spi: zynq-qspi: Set priv->is_parallel/stacked in child_pre_probe()   Takahiro Kuwano via B4 Relay
  • [PATCH 05/11] spi: zynq_qspi: Remove reference to SPI_XFER_LOWER flag.   Takahiro Kuwano via B4 Relay
  • [PATCH 06/11] spi: zynq_qspi: Read two bytes of SR and FSR in parallel mode   Takahiro Kuwano via B4 Relay
  • [PATCH 07/11] mtd: spi-nor: Migrate stacked/parallel part to new modules   Takahiro Kuwano via B4 Relay
  • [PATCH 08/11] mtd: spi-nor: stacked: Cleanup stacked/parallel flags   Takahiro Kuwano via B4 Relay
  • [PATCH 09/11] mtd: spi-nor: parallel: Cleanup stacked/parallel flags   Takahiro Kuwano via B4 Relay
  • [PATCH 10/11] mtd: spi-nor: Revert stacked/parallel related commits   Takahiro Kuwano via B4 Relay
  • [PATCH 11/11] mtd: spi-nor: Call stacked/parallel post init fixups   Takahiro Kuwano via B4 Relay
• [PATCH] net: tftp: Remove tftp_init_load_addr error path   Leonard Anderweit
  • [PATCH] net: tftp: Remove tftp_init_load_addr error path   Yannic Moog
• [PATCH] board: xilinx: Retry FRU EEPROM read on timeout   Michal Simek
  • [PATCH] board: xilinx: Retry FRU EEPROM read on timeout   Matthias Brugger
  • [PATCH] board: xilinx: Retry FRU EEPROM read on timeout   Michal Simek
• [PATCH v2 4/7] arm: dts: k3-{j721s2/j784s4}-binman: Pack HSM firmware inside tispl.bin   Beleswar Prasad Padhi
• Pull request for uboot-nand-20250918   Michael Nazzareno Trimarchi
  • Pull request for uboot-nand-20250918   Tom Rini
• [PATCH v8] Add optimized Makefile support for SoCFPGA handoff   Brian Sune
  • [PATCH v8] Add optimized Makefile support for SoCFPGA handoff   Sune Brian
    • [PATCH v8] Add optimized Makefile support for SoCFPGA handoff   Sune Brian
  • [PATCH v8] Add optimized Makefile support for SoCFPGA handoff   Chee, Tien Fong
• [PATCH] arm64: xilinx: Remove unnecessary #address/size-cells   Michal Simek
  • [PATCH] arm64: xilinx: Remove unnecessary #address/size-cells   Michal Simek
• [PATCH 0/2] Add MPFS CPU Implementation   Jamie Gibbons
  • [PATCH 1/2] riscv: create a custom CPU implementation for PolarFire SoC   Jamie Gibbons
  • [PATCH 2/2] riscv: mpfs: move SoC level options to the CPU Kconfig   Jamie Gibbons
• [GIT PULL] AMD/Xilinx changes for 2026-01-rc3   Michal Simek
  • [GIT PULL] AMD/Xilinx changes for 2026-01-rc3   Tom Rini
  • [GIT PULL] AMD/Xilinx changes for 2026-01-rc3   Tom Rini
• [PATCH v3] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Adriana Nicolae
  • [PATCH v3] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Simon Glass
• [PATCH for v2026.10] Docker: Update QEMU to 10.0.6   Tom Rini
  • [PATCH for v2026.10] Docker: Update QEMU to 10.0.6   Tom Rini
• [PATCH for next] Docker: Update QEMU to 10.1.x   Tom Rini
• [PATCH] capricorn: Stop disabling device tree relocation   Tom Rini
  • [PATCH] capricorn: Stop disabling device tree relocation   Sverdlin, Alexander
  • [PATCH] capricorn: Stop disabling device tree relocation   Heiko Schocher
• [PATCH] imx8mq_phanbell: Stop disabling device tree relocation   Tom Rini
• [PATCH] imx8qm_mek: Stop disabling device tree relocation   Tom Rini
  • [PATCH] imx8qm_mek: Stop disabling device tree relocation   Peng Fan
• [PATCH] imx8qxp_mek: Stop disabling device tree relocation   Tom Rini
  • [PATCH] imx8qxp_mek: Stop disabling device tree relocation   Peng Fan
• [PATCH] liteboard: Stop disabling device tree relocation   Tom Rini
• [PATCH] pcl063: Stop disabling device tree relocation   Tom Rini
• [PATCH] pcl063_ull: Stop disabling device tree relocation   Tom Rini
• [PATCH] pico-imx8mq: Stop disabling device tree relocation   Tom Rini
  • [PATCH] pico-imx8mq: Stop disabling device tree relocation   Marek Vasut
• [PATCH] arm: Remove remainder of zc5xxx board code   Tom Rini
• [PATCH] arm: Remove remainder of xpress board code   Tom Rini
• [PATCH] qemu-arm-sba: Stop disabling device tree relocation   Tom Rini
• [PATCH] ae350: Stop disabling device tree relocation   Tom Rini
• [PATCH] am335x_shc: Stop disabling device tree relocation   Tom Rini
  • [PATCH] am335x_shc: Stop disabling device tree relocation   Heiko Schocher
• [PATCH] bcmstb: Make use of bootm_size rather than fdt_high   Tom Rini
• [PATCH] dragonboard820c: Stop disabling device tree relocation   Tom Rini
• [PATCH] hikey: Stop disabling device tree relocation   Tom Rini
• [PATCH] hikey960: Stop disabling device tree relocation   Tom Rini
• [PATCH] ls1012afrdm: Stop disabling device tree relocation   Tom Rini
  • [PATCH] ls1012afrdm: Stop disabling device tree relocation   Peng Fan (OSS)
• [PATCH] ls1043a: Stop disabling device tree relocation   Tom Rini
  • [PATCH] ls1043a: Stop disabling device tree relocation   Peng Fan (OSS)
• [PATCH] omap3_evm: Stop disabling device tree relocation   Tom Rini
• [PATCH] pcm052: Stop disabling device tree relocation   Tom Rini
• [PATCH] s5p4418_nanopi2: Stop disabling device tree relocation   Tom Rini
  • [PATCH] s5p4418_nanopi2: Stop disabling device tree relocation   Stefan Bosch
    • [PATCH] s5p4418_nanopi2: Stop disabling device tree relocation   Minkyu Kang
• [PATCH] sifive-unleashed: Stop disabling device tree relocation   Tom Rini
• [PATCH] socfpga_vining_fpga: Stop disabling device tree relocation   Tom Rini
  • [PATCH] socfpga_vining_fpga: Stop disabling device tree relocation   Marek Vasut
• [PATCH] tegra: Stop disabling device tree relocation   Tom Rini
  • [PATCH] tegra: Stop disabling device tree relocation   Svyatoslav Ryhel
    • [PATCH] tegra: Stop disabling device tree relocation   Tom Rini
• [PATCH] vexpress_aemv8: Stop disabling device tree relocation   Tom Rini
  • [PATCH] vexpress_aemv8: Stop disabling device tree relocation   Linus Walleij
• [GIT PULL] Please pull u-boot-ufs-20251119   Neil Armstrong
  • [GIT PULL] Please pull u-boot-ufs-20251119   Tom Rini
• [PATCH v1] configs: qcom_qcs615: Correct debug UART clock frequency   Balaji Selvanathan
• [PATCH v1 0/6] Enable USB3 Super-Speed support for QCM6490/SC7280   Balaji Selvanathan
  • [PATCH v1 1/6] drivers: clk: qcom: sc7280: Add USB3 PHY pipe clock   Balaji Selvanathan
    • [PATCH v1 1/6] drivers: clk: qcom: sc7280: Add USB3 PHY pipe clock   neil.armstrong at linaro.org
  • [PATCH v1 2/6] drivers: usb: dwc3: Add delay after core soft reset   Balaji Selvanathan
    • [PATCH v1 2/6] drivers: usb: dwc3: Add delay after core soft reset   neil.armstrong at linaro.org
      • [PATCH v1 2/6] drivers: usb: dwc3: Add delay after core soft reset   Balaji Selvanathan
    • [PATCH v1 2/6] drivers: usb: dwc3: Add delay after core soft reset   Marek Vasut
      • [PATCH v1 2/6] drivers: usb: dwc3: Add delay after core soft reset   Balaji Selvanathan
  • [PATCH v1 3/6] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   Balaji Selvanathan
    • [PATCH v1 3/6] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   Tom Rini
      • [PATCH v1 3/6] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   Balaji Selvanathan
      • [PATCH v1 3/6] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   Tom Rini
    • [PATCH v1 3/6] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   neil.armstrong at linaro.org
      • [PATCH v1 3/6] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   Balaji Selvanathan
  • [PATCH v1 4/6] arch: arm: mach-snapdragon: Make USB speed fixup configurable   Balaji Selvanathan
  • [PATCH v1 5/6] arch: arm: dts: qcs6490-rb3gen2: Override USB3 PHY clocks   Balaji Selvanathan
  • [PATCH v1 6/6] configs: qcm6490: Enable super-speed USB support   Balaji Selvanathan
• [PATCH 0/5] led: remove unused legacy LED code   Quentin Schulz
  • [PATCH 1/5] led: remove code guarded by always false conditions   Quentin Schulz
    • [PATCH 1/5] led: remove code guarded by always false conditions   Tom Rini
  • [PATCH 2/5] led: remove coloured_LED_init, yellow and blue status LEDs in legacy API   Quentin Schulz
  • [PATCH 3/5] arm: omap3: remove leftover from CM_T35 support removal   Quentin Schulz
    • [PATCH 3/5] arm: omap3: remove leftover from CM_T35 support removal   Tom Rini
  • [PATCH 4/5] net: remove unreachable legacy LED code   Quentin Schulz
    • [PATCH 4/5] net: remove unreachable legacy LED code   Tom Rini
  • [PATCH 5/5] powerpc: remove unused legacy LED API   Quentin Schulz
  • [PATCH 0/5] led: remove unused legacy LED code   Simon Glass
• [PATCH 0/4] led: remove green and red status LEDs from legacy LED API   Quentin Schulz
  • [PATCH 1/4] corvus: remove green led support   Quentin Schulz
    • [PATCH 1/4] corvus: remove green led support   Heiko Schocher
  • [PATCH 2/4] led: remove support for green status led in legacy API   Quentin Schulz
    • [PATCH 2/4] led: remove support for green status led in legacy API   Heiko Schocher
  • [PATCH 3/4] corvus: migrate red LED to the modern API   Quentin Schulz
    • [PATCH 3/4] corvus: migrate red LED to the modern API   Heiko Schocher
      • [PATCH 3/4] corvus: migrate red LED to the modern API   Freihofer, Adrian
  • [PATCH 4/4] led: remove support for red LED in legacy API   Quentin Schulz
    • [PATCH 4/4] led: remove support for red LED in legacy API   Heiko Schocher
  • [PATCH 0/4] led: remove green and red status LEDs from legacy LED API   Heiko Schocher
• [PATCH] board: softing: vining: migrate to modern LED framework   Quentin Schulz
• [PATCH] board: BuS: remove support for BOOT LED   Quentin Schulz
• [PATCH v2] boot: Warn users about fdt_high=~0 usage   Marek Vasut
  • [PATCH v2] boot: Warn users about fdt_high=~0 usage   Tom Rini
  • [PATCH v2] boot: Warn users about fdt_high=~0 usage   Ilias Apalodimas
• [PATCH] sh: Assure end of U-Boot is at 8-byte aligned offset   Marek Vasut
• [PATCH v4] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Adriana Nicolae
  • [PATCH v4] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Simon Glass
  • Re: [PATCH v4] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Heinrich Schuchardt
• [PATCH v3 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Marek Vasut
  • [PATCH v3 2/2] test/py: android: Point fdt command to aligned addresses   Marek Vasut
    • [PATCH v3 2/2] test/py: android: Point fdt command to aligned addresses   Mattijs Korpershoek
  • [PATCH v3 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Tom Rini
  • [PATCH v3 1/2] boot: android: Always use 8-byte aligned DT with libfdt   Mattijs Korpershoek
• [PATCH] arm64: renesas: r8a779g3: Use redundant env on Retronix R-Car V4H Sparrow Hawk board   Marek Vasut
• [PATCH] ARM: dts: renesas: Enable R8A779G0 V4H White Hawk RPC SPI DT node   Marek Vasut
• [PATCH v2 1/3] arm64: renesas: Add Renesas R-Car Gen5 infrastructure   Marek Vasut
  • [PATCH v2 2/3] arm64: dts: renesas: Add Renesas R-Car X5H R8A78000 SoC DTs   Marek Vasut
  • [PATCH v2 3/3] arm64: dts: renesas: Add Renesas R-Car X5H R8A78000 Ironhide board code   Marek Vasut
• tcp server with tftp   Yonkee, Nathan Paul
  • tcp server with tftp   Nathaniel Hourt
    • [EXTERNAL] Re: tcp server with tftp   Yonkee, Nathan Paul
• [PATCH] clk: fixed_rate: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Marek Vasut
  • [PATCH] clk: fixed_rate: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Simon Glass
    • [PATCH] clk: fixed_rate: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Marek Vasut
      • [PATCH] clk: fixed_rate: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Simon Glass
      • [PATCH] clk: fixed_rate: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Tom Rini
      • [PATCH] clk: fixed_rate: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Simon Glass
      • [PATCH] clk: fixed_rate: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Marek Vasut
      • [PATCH] clk: fixed_rate: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Simon Glass
      • [PATCH] clk: fixed_rate: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Tom Rini
      • [PATCH] clk: fixed_rate: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Simon Glass
• [PATCH] gpio: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Marek Vasut
• [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Marek Vasut
  • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Heiko Schocher
    • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Marek Vasut
      • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Heiko Schocher
      • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Simon Glass
      • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Marek Vasut
      • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Simon Glass
      • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Marek Vasut
      • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Simon Glass
      • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Marek Vasut
      • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Simon Glass
      • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Tom Rini
      • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Marek Vasut
      • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Simon Glass
      • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Tom Rini
      • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Simon Glass
      • [PATCH] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Tom Rini
• [PATCH] boot: Check noffset before use   Marek Vasut
  • [PATCH] boot: Check noffset before use   Heinrich Schuchardt
• [PATCH v5 0/7] Implement the Generic System Interconnect Subsystem for U-Boot   Neil Armstrong
  • [PATCH v5 1/7] Introduce the Generic System Interconnect Subsystem   Neil Armstrong
  • [PATCH v5 2/7] interconnect: add DM test suite   Neil Armstrong
  • [PATCH v5 3/7] MAINTAINERS: add myself as Maintainer of the Generic System Interconnect Subsystem   Neil Armstrong
  • [PATCH v5 4/7] interconnect: add support for the Qualcomm RPMh helpers   Neil Armstrong
  • [PATCH v5 5/7] interconnect: add support for the SM8650 SoC   Neil Armstrong
  • [PATCH v5 6/7] ufs: qcom: vote for interconnect bandwidth on probe   Neil Armstrong
  • [PATCH v5 7/7] qcom_defconfig: enable interconnect for SM8650   Neil Armstrong
  • [PATCH v5 0/7] Implement the Generic System Interconnect Subsystem for U-Boot   Neil Armstrong
• [PATCH v2] net: tftp: Remove tftp_init_load_addr error path   Leonard Anderweit
  • [PATCH v2] net: tftp: Remove tftp_init_load_addr error path   Yannic Moog
• [PATCH v5] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Adriana Nicolae
  • [PATCH v5] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Simon Glass
  • [PATCH v5] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Heinrich Schuchardt
  • [PATCH v5] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Tom Rini
• [PATCH next] configs: am64x, am65x: add CONFIG_DA8XX_GPIO   Anshul Dalal
• [PULL] Please pull interconnect-next-20251120   Neil Armstrong
  • [PULL] Please pull interconnect-next-20251120   Tom Rini
• [PATCH v3 1/2] arm: dts: imx8ulp: Ensure mu at 27020000 and lpuart5 availability during all boot phases   alice.guo at oss.nxp.com
  • [PATCH v3 2/2] arm: dts: imx8ulp: Disable wdog3 until DM watchdog support is available   alice.guo at oss.nxp.com
  • [PATCH v3 1/2] arm: dts: imx8ulp: Ensure mu at 27020000 and lpuart5 availability during all boot phases   Fabio Estevam
• [PATCH] sunxi: remove usage of legacy LED API   Quentin Schulz
  • [PATCH] sunxi: remove usage of legacy LED API   Andre Przywara
    • [PATCH] sunxi: remove usage of legacy LED API   Quentin Schulz
• [PATCH 0/2] led: remove legacy API   Quentin Schulz
  • [PATCH 1/2] led: migrate last legacy LED user (olinuxino+net) to modern LED framework   Quentin Schulz
  • [PATCH 2/2] led: remove legacy API   Quentin Schulz
• [PATCH] reboot-mode: Correct macro name from U_BOOT_DEVICE to U_BOOT_DRVINFO   Cibil Pankiras
• [PATCH v6 00/13] am62: IO+DDR resume support   Markus Schneider-Pargmann (TI.com)
  • [PATCH v6 01/13] arm: mach-k3: Remove CANUART IO isolation   Markus Schneider-Pargmann (TI.com)
    • [PATCH v6 01/13] arm: mach-k3: Remove CANUART IO isolation   Kumar, Udit
  • [PATCH v6 02/13] arm: mach-k3: Kconfig: Add symbol for IO+DDR Low Power Mode   Markus Schneider-Pargmann (TI.com)
  • [PATCH v6 03/13] ram: k3-ddrss: Add support for DDR in self-refresh   Markus Schneider-Pargmann (TI.com)
    • [PATCH v6 03/13] ram: k3-ddrss: Add support for DDR in self-refresh   Kumar, Udit
  • [PATCH v6 04/13] firmware: ti_sci: Add TI_SCI_MSG_MIN_CONTEXT_RESTORE   Markus Schneider-Pargmann (TI.com)
    • [PATCH v6 04/13] firmware: ti_sci: Add TI_SCI_MSG_MIN_CONTEXT_RESTORE   Kumar, Udit
  • [PATCH v6 05/13] arm: mach-k3: common: Add CANUART wakeup check helpers   Markus Schneider-Pargmann (TI.com)
    • [PATCH v6 05/13] arm: mach-k3: common: Add CANUART wakeup check helpers   Kumar, Udit
  • [PATCH v6 06/13] arm: mach-k3: common: Add lpm_resume_from_ddr   Markus Schneider-Pargmann (TI.com)
  • [PATCH v6 07/13] arm: mach-k3: common: Helper for LPM meta data address from DT   Markus Schneider-Pargmann (TI.com)
    • [PATCH v6 07/13] arm: mach-k3: common: Helper for LPM meta data address from DT   Kendall Willis
    • [PATCH v6 07/13] arm: mach-k3: common: Helper for LPM meta data address from DT   Kumar, Udit
  • [PATCH v6 08/13] arm: mach-k3: am62a7_init: Resume on LPM exit   Markus Schneider-Pargmann (TI.com)
    • [PATCH v6 08/13] arm: mach-k3: am62a7_init: Resume on LPM exit   Kumar, Udit
  • [PATCH v6 09/13] arm: mach-k3: am62p5_init: Resume on LPM exit   Markus Schneider-Pargmann (TI.com)
  • [PATCH v6 10/13] arm: dts: k3-am62a: Add r5 device nodes   Markus Schneider-Pargmann (TI.com)
    • [PATCH v6 10/13] arm: dts: k3-am62a: Add r5 device nodes   Kumar, Udit
  • [PATCH v6 11/13] arm: dts: k3-am62p: Add r5 device nodes   Markus Schneider-Pargmann (TI.com)
    • [PATCH v6 11/13] arm: dts: k3-am62p: Add r5 device nodes   Chawdhry, Manorit
  • [PATCH v6 12/13] configs: am62ax_evm_r5: Enable IODDR resume support   Markus Schneider-Pargmann (TI.com)
    • [PATCH v6 12/13] configs: am62ax_evm_r5: Enable IODDR resume support   Kendall Willis
  • [PATCH v6 13/13] configs: am62p_evm_r5_defconfig: Enable IODDR resume support   Markus Schneider-Pargmann (TI.com)
    • [PATCH v6 13/13] configs: am62p_evm_r5_defconfig: Enable IODDR resume support   Kendall Willis
• [PATCH] boot: pxe_utils: Allocate space for overlay_dir before writing into it   Surkov Kirill
  • [PATCH] boot: pxe_utils: Allocate space for overlay_dir before writing into it   Quentin Schulz
• [PATCH v3] boot: pxe_utils: Fix incorrect allocation of overlay_dir   Surkov Kirill
  • [PATCH v3] boot: pxe_utils: Fix incorrect allocation of overlay_dir   Quentin Schulz
• [PATCH v3 1/1] video: add DejaVu Mono font   Heinrich Schuchardt
  • [PATCH v3 1/1] video: add DejaVu Mono font   Simon Glass
• [PATCH] configs: phycore_am64x_a53_defconfig: Drop eMMC HS400 mode   Dominik Haller
• [PATCH] bootm: fix boot failure from compressed image for IH_OS_EFI   Masahisa Kojima
  • [PATCH] bootm: fix boot failure from compressed image for IH_OS_EFI   Heinrich Schuchardt
    • [PATCH] bootm: fix boot failure from compressed image for IH_OS_EFI   kojima.masahisa at socionext.com
    • [PATCH] bootm: fix boot failure from compressed image for IH_OS_EFI   Kunihiko Hayashi
• Query on RISC-V booting ABI   Ivan Velickovic
  • Query on RISC-V booting ABI   Ivan Velickovic
  • Query on RISC-V booting ABI   Yao Zi
    • Query on RISC-V booting ABI   Ivan Velickovic
• [PATCH 0/4] board: tqma6: non-functional changes   Max Merchel
  • [PATCH 1/4] tqma6: Remove empty function tqma6_iomuxc_spi()   Max Merchel
  • [PATCH 2/4] board: tqma6: style fixes   Max Merchel
  • [PATCH 3/4] board: [cosmetic] tqma6: adjust SPDX tag   Max Merchel
    • [PATCH 3/4] board: [cosmetic] tqma6: adjust SPDX tag   Tom Rini
  • [PATCH 4/4] board: tqma6: update MAINTAINERS   Max Merchel
• [PATCH 0/2] net: phy: micrel_ksz90x1: workarounds for ksz9031 ERRATA   Max Merchel
• [PATCH 1/2] net: phy: micrel_ksz90x1: disable asymmetric pause for KSZ9031   Max Merchel
  • [PATCH 1/2] net: phy: micrel_ksz90x1: disable asymmetric pause for KSZ9031   Quentin Schulz
• [PATCH 2/2] net: phy: micrel_ksz90x1: support forced GIGE master for KSZ9031   Max Merchel
• [PATCH v1 1/2] efi_loader: improve device path matching for partition lookup   Balaji Selvanathan
  • [PATCH v1 1/2] efi_loader: improve device path matching for partition lookup   Ilias Apalodimas
    • [PATCH v1 1/2] efi_loader: improve device path matching for partition lookup   Ilias Apalodimas
  • [PATCH v1 1/2] efi_loader: improve device path matching for partition lookup   Ilias Apalodimas
    • [PATCH v1 1/2] efi_loader: improve device path matching for partition lookup   Balaji Selvanathan
    • [PATCH v1 1/2] efi_loader: improve device path matching for partition lookup   Balaji Selvanathan
• [PATCH RFT v7 0/3] fastboot: add support for generic block flashing   Neil Armstrong
  • [PATCH RFT v7 1/3] fastboot: blk: introduce fastboot block flashing support   Neil Armstrong
  • [PATCH RFT v7 2/3] fastboot: blk: switch emmc to use the block helpers   Neil Armstrong
  • [PATCH RFT v7 3/3] fastboot: integrate block flashing back-end   Neil Armstrong
  • [PATCH RFT v7 0/3] fastboot: add support for generic block flashing   Mattijs Korpershoek
• [PATCH v4 01/21] net: ti: am65-cpsw-nuss: Define bind method for CPSW driver   Wadim Egorov
  • [PATCH v4 01/21] net: ti: am65-cpsw-nuss: Define bind method for CPSW driver   Siddharth Vadapalli
• [PATCH] net: ti: am65-cpsw-nuss: Ignore disabled ethernet ports   Siddharth Vadapalli
  • [PATCH] net: ti: am65-cpsw-nuss: Ignore disabled ethernet ports   Tom Rini
• [PATCH next 0/3] CI: use mirrors for GNU tools   Quentin Schulz
  • [PATCH next 1/3] CI: use GNU mirror for grub (and switch to HTTPS)   Quentin Schulz
    • [PATCH next 1/3] CI: use GNU mirror for grub (and switch to HTTPS)   Tom Rini
  • [PATCH next 2/3] CI: use mirror for gnulib dependency of grub   Quentin Schulz
    • [PATCH next 2/3] CI: use mirror for gnulib dependency of grub   Tom Rini
      • [PATCH next 2/3] CI: use mirror for gnulib dependency of grub   Quentin Schulz
      • [PATCH next 2/3] CI: use mirror for gnulib dependency of grub   Quentin Schulz
  • [PATCH next 3/3] CI: use coreboot mirror for GNU dependencies of coreboot   Quentin Schulz
    • [PATCH next 3/3] CI: use coreboot mirror for GNU dependencies of coreboot   Tom Rini
• [PATCH 0/2] a few test.py improvements   David Lechner
  • [PATCH 1/2] test/py/requirements.txt: add setuptools   David Lechner
  • [PATCH 2/2] test.py: check ubconfig exists before using it   David Lechner
    • [PATCH 2/2] test.py: check ubconfig exists before using it   Simon Glass
      • [PATCH 2/2] test.py: check ubconfig exists before using it   David Lechner
      • [PATCH 2/2] test.py: check ubconfig exists before using it   Simon Glass
• [PATCH 1/2] test/py/requirements.txt: add setuptools   Tom Rini
  • [PATCH 1/2] test/py/requirements.txt: add setuptools   David Lechner
  • [PATCH 1/2] test/py/requirements.txt: add setuptools   Tom Rini
    • [PATCH 1/2] test/py/requirements.txt: add setuptools   Marek Vasut
• [RFC PATCH 0/5] drivers: usb: dwc3: sync code with Linux v6.16-rc1   Jerome Forissier
  • [RFC PATCH 1/5] usb: dwc3: re-import from kernel v6.16-rc7   Jerome Forissier
  • [RFC PATCH 2/5] usb: host: re-import xhci-ext-caps.h from kernel v6.16-rc7   Jerome Forissier
  • [RFC PATCH 3/5] usb: gadget: re-import epautoconf.c from kernel v6.16-rc7   Jerome Forissier
  • [RFC PATCH 4/5] usb: udc: re-import udc-core.c from kernel v6.16-rc7   Jerome Forissier
  • [RFC PATCH 5/5] usb: fix build after resync of DWC3 with kernel v6.16-rc7   Jerome Forissier
  • [RFC PATCH 0/5] drivers: usb: dwc3: sync code with Linux v6.16-rc1   Marek Vasut
    • [RFC PATCH 0/5] drivers: usb: dwc3: sync code with Linux v6.16-rc1   Jerome Forissier
      • [RFC PATCH 0/5] drivers: usb: dwc3: sync code with Linux v6.16-rc1   Marek Vasut
• [PATCH v4 14/21] arm: mach-k3: j722s: Update SoC autogenerated data to enable Ethernet boot   Michael Walle
• [PATCH v2] clk: fixed_rate: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Marek Vasut
• [PATCH v2] gpio: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Marek Vasut
• [PATCH] CI: add libengine-pkcs11-openssl package for pkcs11   Quentin Schulz
  • [PATCH] CI: add libengine-pkcs11-openssl package for pkcs11   Tom Rini
• [PATCH v3 0/4] fit: allow signing with an OpenSSL engine   Quentin Schulz
  • [PATCH v3 1/4] fit: support signing with only an engine_id   Quentin Schulz
  • [PATCH v3 2/4] tools: binman: mkimage: add support for passing the engine   Quentin Schulz
  • [PATCH v3 3/4] tools: binman: fit: add support for OpenSSL engines   Quentin Schulz
    • [PATCH v3 3/4] tools: binman: fit: add support for OpenSSL engines   Simon Glass
      • [PATCH v3 3/4] tools: binman: fit: add support for OpenSSL engines   Quentin Schulz
  • [PATCH v3 4/4] tools: binman: fit: add tests for signing with an OpenSSL engine   Quentin Schulz
    • [PATCH v3 4/4] tools: binman: fit: add tests for signing with an OpenSSL engine   Simon Glass
      • [PATCH v3 4/4] tools: binman: fit: add tests for signing with an OpenSSL engine   Quentin Schulz
• [PATCH 0/8] net: fec_mxc: fix bugs when using DM_MDIO and DM_ETH_PHY.   Alexander Feilke
• [PATCH v2 0/3] clk: Return value calculated by ERR_PTR   Andrew Goodbody
  • [PATCH v2 1/3] clk: Prevent SIGSEGV on debug   Andrew Goodbody
    • [PATCH v2 1/3] clk: Prevent SIGSEGV on debug   Andrew Goodbody
  • [PATCH v2 2/3] clk: Return value calculated by ERR_PTR   Andrew Goodbody
  • [PATCH v2 3/3] clk: Prevent memory leak on error   Andrew Goodbody
• [PATCH 1/8] net: fec_mxc: respect return value of phy_config   Alexander Feilke
  • [PATCH 2/8] net: fec-mxc: prevent crash if no MAC address is set   Alexander Feilke
  • [PATCH 3/8] net: fec_mxc: fix probe of MDIO bus for DM_MDIO   Alexander Feilke
  • [PATCH 4/8] net: fec_mxc: fix remove with DM_MDIO   Alexander Feilke
  • [PATCH 5/8] net: fec_mxc: rewrite fallback MDIO Bus allocation   Alexander Feilke
  • [PATCH 6/8] net: fec_mxc: fix usage of DM_MDIO and DM_ETH_PHY   Alexander Feilke
  • [PATCH 7/8] net: fec_mxc: add unique bus and device names for DM_MDIO   Alexander Feilke
  • [PATCH 8/8] net: fec_mxc.c: improve readability of dm_fec_bind_mdio   Alexander Feilke
• [PATCH] doc: pytest: fix u-boot-test-flash typo   David Lechner
• [PATCH v2 1/2] i2c: sandbox: Inline i2c_chip_of_to_plat() into i2c_child_post_bind()   Marek Vasut
  • [PATCH v2 2/2] i2c: sandbox: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Marek Vasut
• Pull request efi-next-2025-11-25 for next branch   Heinrich Schuchardt
  • Pull request efi-next-2025-11-25 for next branch   Tom Rini
• Pull request efi-2026-01-rc3-2 for master branch   Heinrich Schuchardt
  • Pull request efi-2026-01-rc3-2 for master branch   Tom Rini
• [PATCH] board: freescale: Fix error handling in ls1088a board setup   Francois Berder
  • [PATCH] board: freescale: Fix error handling in ls1088a board setup   Peng Fan (OSS)
• v2025.10 env Kconfig rename (fb5235239aad) removed backward compatibility   Ozan Durgut
  • v2025.10 env Kconfig rename (fb5235239aad) removed backward compatibility   Quentin Schulz
    • v2025.10 env Kconfig rename (fb5235239aad) removed backward compatibility   Quentin Schulz
    • v2025.10 env Kconfig rename (fb5235239aad) removed backward compatibility   Philip Molloy
• [PATCH] examples: Fix checking id parameter in thread_start   Francois Berder
• [PATCH 0/2] doc: add a page for downloading the U-Boot logo   Heinrich Schuchardt
  • [PATCH 1/2] tools/logos: Add U-Boot logo with text 'U-Boot'   Heinrich Schuchardt
  • [PATCH 2/2] doc: add a page for downloading the U-Boot logo   Heinrich Schuchardt
• [PATCH 1/1] test: Let pytest indicate skipped C unit tests   Heinrich Schuchardt
• [PATCH 0/3] board: qemu-arm: enable CONFIG_CONSOLE_RECORD   Heinrich Schuchardt
  • [PATCH 1/3] test: cmd/bdinfo: consider ARM architecture specific info   Heinrich Schuchardt
    • [PATCH 1/3] test: cmd/bdinfo: consider ARM architecture specific info   Ilias Apalodimas
  • [PATCH 2/3] test: print_display_buffer must consider 64bit support   Heinrich Schuchardt
  • [PATCH 3/3] board: qemu-arm: enable CONFIG_CONSOLE_RECORD   Heinrich Schuchardt
  • [PATCH 0/3] board: qemu-arm: enable CONFIG_CONSOLE_RECORD   Tom Rini
• [Security] Heap Buffer Overflow in CramFS   Koon
• [PATCH] sunxi: avoid double vendor prefix when CONFIG_OF_UPSTREAM is enabled   Bohdan Chubuk
• [PATCH 00/19] test: let UNIT_TEST imply CONSOLE_RECORD   Heinrich Schuchardt
  • [RESEND][PATCH 01/19] test: Let pytest indicate skipped C unit tests   Heinrich Schuchardt
  • [[RESEND][PATCH 02/19] test: cmd/bdinfo: consider ARM architecture specific info   Heinrich Schuchardt
  • [RESEND][PATCH 03/19] test: print_display_buffer must consider 64bit support   Heinrich Schuchardt
  • [PATCH 04/19] test: don't test for CONFIG_UNIT_TEST twice   Heinrich Schuchardt
  • [PATCH 05/19] test: print_do_hex_dump test depends on HEXDUMP   Heinrich Schuchardt
    • [PATCH 05/19] test: print_do_hex_dump test depends on HEXDUMP   Ilias Apalodimas
  • [PATCH 06/19] test: bdinfo: correct expected X86 arch info   Heinrich Schuchardt
  • [PATCH 07/19] test: cmd_exit_test depends on CONFIG_HUSH_PARSER   Heinrich Schuchardt
    • [PATCH 07/19] test: cmd_exit_test depends on CONFIG_HUSH_PARSER   Tom Rini
  • [PATCH 08/19] test: do not assume memory size 256 MiB in cmd_test_meminfo   Heinrich Schuchardt
    • [PATCH 08/19] test: do not assume memory size 256 MiB in cmd_test_meminfo   Ilias Apalodimas
  • [PATCH 09/19] ppce500: increase SYS_MALLOC_F_LEN to 0x800   Heinrich Schuchardt
  • [PATCH 10/19] test: the cmd/font test requires the sandbox   Heinrich Schuchardt
  • [PATCH 11/19] test: correct comments in test/cmd/font.c   Heinrich Schuchardt
  • [PATCH 12/19] test: fix bdinfo_test_all boot_params expectation   Heinrich Schuchardt
  • [PATCH 13/19] malta: increase SYS_MALLOC_F_LEN and SYS_MALLOC_LEN   Heinrich Schuchardt
  • [PATCH 14/19] test: consider endianness in print_display_buffer   Heinrich Schuchardt
  • [PATCH 15/19] test: fix cmt/msr test   Heinrich Schuchardt
  • [PATCH 16/19] test: relax cread_test time constraint   Heinrich Schuchardt
  • [PATCH 17/19] test: cmd/bdinfo: consider PPC architecture specific info   Heinrich Schuchardt
  • [PATCH 18/19] cmd: fix 'fdt get value'   Heinrich Schuchardt
  • [PATCH 19/19] test: let UNIT_TEST imply CONSOLE_RECORD   Heinrich Schuchardt
• [PATCH v2 0/4] board: tqma6: non-functional changes   Max Merchel
  • [PATCH v2 2/4] board: tqma6: style fixes   Max Merchel
  • [PATCH v2 4/4] board: tqma6: update MAINTAINERS   Max Merchel
• [PATCH v2 1/4] tqma6: Remove empty function tqma6_iomuxc_spi()   Max Merchel
• [PATCH v2 3/4] board: [cosmetic] tqma6: adjust SPDX tag   Max Merchel
• [PATCH v2 1/2] board: phytec: phytec_som_detection: Add missing assignment   Daniel Schultz
  • [PATCH v2 2/2] board: phytec: phytec_som_detection: Add support for phyFLEX   Daniel Schultz
• [PATCH v3 1/2] i2c: Inline i2c_chip_of_to_plat() into i2c_child_post_bind()   Marek Vasut
  • [PATCH v3 2/2] i2c: Avoid calling dev_read_*() if CONFIG_OF_PLATDATA=y   Marek Vasut
• [PATCH] board: ti: am6x: Restore do_board_detect functions   Guillaume La Roque (TI.com)
  • [PATCH] board: ti: am6x: Restore do_board_detect functions   Tom Rini
• [ANN] U-Boot v2026.01-rc3 released   Tom Rini
• [PATCH v2 0/7] Enable USB3 Super-Speed support for QCM6490/SC7280   Balaji Selvanathan
  • [PATCH v2 1/7] drivers: clk: qcom: sc7280: Add USB3 PHY pipe clock   Balaji Selvanathan
    • [PATCH v2 1/7] drivers: clk: qcom: sc7280: Add USB3 PHY pipe clock   Casey Connolly
  • [PATCH v2 2/7] drivers: usb: dwc3: Add delay after core soft reset   Balaji Selvanathan
  • [PATCH v2 3/7] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   Balaji Selvanathan
    • [PATCH v2 3/7] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   Tom Rini
      • [PATCH v2 3/7] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   Balaji Selvanathan
    • [PATCH v2 3/7] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   Casey Connolly
      • [PATCH v2 3/7] drivers: phy: qcom: Add QMP USB3-DP Combo PHY driver   Balaji Selvanathan
  • [PATCH v2 4/7] arch: arm: mach-snapdragon: Make USB speed fixup configurable   Balaji Selvanathan
    • [PATCH v2 4/7] arch: arm: mach-snapdragon: Make USB speed fixup configurable   Casey Connolly
  • [PATCH v2 5/7] arch: arm: dts: qcs6490-rb3gen2: Override USB3 PHY clocks   Balaji Selvanathan
    • [PATCH v2 5/7] arch: arm: dts: qcs6490-rb3gen2: Override USB3 PHY clocks   Casey Connolly
  • [PATCH v2 6/7] configs: qcm6490: Enable super-speed USB support   Balaji Selvanathan
  • [PATCH v2 7/7] MAINTAINERS: Add entry for Qualcomm PHY drivers   Balaji Selvanathan
• [PATCH v1] test: correct strlcat license information   Denis 'GNUtoo' Carikli
  • [PATCH v1] test: correct strlcat license information   Tom Rini
• [PATCH v2 1/2] test/py: fit: Deduplicate the test   Marek Vasut
  • [PATCH v2 2/2] mkimage: Add support for bundling TEE in mkimage -f auto   Marek Vasut
    • [PATCH v2 2/2] mkimage: Add support for bundling TEE in mkimage -f auto   Quentin Schulz
      • [PATCH v2 2/2] mkimage: Add support for bundling TEE in mkimage -f auto   Marek Vasut
  • [PATCH v2 1/2] test/py: fit: Deduplicate the test   Quentin Schulz
    • [PATCH v2 1/2] test/py: fit: Deduplicate the test   Tom Rini
    • [PATCH v2 1/2] test/py: fit: Deduplicate the test   Marek Vasut
      • [PATCH v2 1/2] test/py: fit: Deduplicate the test   Quentin Schulz
• [PATCH] autoboot: Fix inconsistent countdown output   Sam Protsenko
  • [PATCH] autoboot: Fix inconsistent countdown output   Tom Rini
    • [PATCH] autoboot: Fix inconsistent countdown output   David Zang
• [PATCH 0/2] doc: pytest: fix hook script env vars   David Lechner
  • [PATCH 1/2] doc: pytest: fix hook script environment variable names   David Lechner
  • [PATCH 2/2] doc: pytest: add missing hook script env vars   David Lechner
• [PATCH 1/2] doc: pytest: fix hook script environment variable names   Heinrich Schuchardt
  • [PATCH 1/2] doc: pytest: fix hook script environment variable names   David Lechner
• [PATCH 2/2] doc: pytest: add missing hook script env vars   Heinrich Schuchardt
  • [PATCH 2/2] doc: pytest: add missing hook script env vars   David Lechner
• [PATCH v1 0/8]SoCFPGA: Update Boot Support for CycloneV in U-Boot   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   alif.zakuan.yuslaimi at altera.com
    • [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Marek Vasut
      • [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Yuslaimi, Alif Zakuan
      • [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Marek Vasut
      • [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Yuslaimi, Alif Zakuan
      • [PATCH v1 2/8] arm: Fix "file truncated" linker errors from empty built-in.a in SPL/TPL/VPL builds   Tom Rini
  • [PATCH v1 3/8] configs: cyclone5: Enable random MAC address   alif.zakuan.yuslaimi at altera.com
    • [PATCH v1 3/8] configs: cyclone5: Enable random MAC address   Marek Vasut
      • [PATCH v1 3/8] configs: cyclone5: Enable random MAC address   Yuslaimi, Alif Zakuan
  • [PATCH v1 4/8] mmc: socfpga_dw_mmc: Restore legacy clkmgr address retrieval   alif.zakuan.yuslaimi at altera.com
    • [PATCH v1 4/8] mmc: socfpga_dw_mmc: Restore legacy clkmgr address retrieval   Marek Vasut
      • [PATCH v1 4/8] mmc: socfpga_dw_mmc: Restore legacy clkmgr address retrieval   Yuslaimi, Alif Zakuan
  • [PATCH v1 5/8] spl: Remove ARCH_SOCFPGA from MMC raw mode enablement   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   alif.zakuan.yuslaimi at altera.com
    • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Jan Kiszka
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Jan Kiszka
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Chee, Tien Fong
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Chee, Tien Fong
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Jan Kiszka
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Sune Brian
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Jan Kiszka
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Sune Brian
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Jan Kiszka
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Sune Brian
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Jan Kiszka
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Sune Brian
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Jan Kiszka
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Sune Brian
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Jan Kiszka
      • [PATCH v1 6/8] configs: cyclone5: Enable SPL FAT support   Sune Brian
  • [PATCH v1 7/8] configs: cyclone5: Update boot command for CycloneV   alif.zakuan.yuslaimi at altera.com
  • [PATCH v1 8/8] configs: cyclone5: Disable SPI in SPL   alif.zakuan.yuslaimi at altera.com
• [PATCH v1 1/8] configs: cyclone5: Disable mkeficapsule tool build   alif.zakuan.yuslaimi at altera.com
• [PATCH 1/2] usb: ci_udc: Check ci_ep->desc before use   Michal Vokáč
  • [PATCH 2/2] usb: ci_udc: cosmetics: EP and requests debug info   Michal Vokáč
    • [PATCH 2/2] usb: ci_udc: cosmetics: EP and requests debug info   Mattijs Korpershoek
  • [PATCH 1/2] usb: ci_udc: Check ci_ep->desc before use   Marek Vasut
    • [PATCH 1/2] usb: ci_udc: Check ci_ep->desc before use   Petr Benes
  • [PATCH 1/2] usb: ci_udc: Check ci_ep->desc before use   Mattijs Korpershoek
    • [PATCH 1/2] usb: ci_udc: Check ci_ep->desc before use   Petr Benes
      • [PATCH 1/2] usb: ci_udc: Check ci_ep->desc before use   Mattijs Korpershoek
• [PATCH] arm: mach-k3: j722s: Update SoC auto-gen data   Chintan Vankar
  • [PATCH] arm: mach-k3: j722s: Update SoC auto-gen data   Michael Walle
    • [PATCH] arm: mach-k3: j722s: Update SoC auto-gen data   Chintan Vankar
      • [PATCH] arm: mach-k3: j722s: Update SoC auto-gen data   Chintan Vankar
      • [PATCH] arm: mach-k3: j722s: Update SoC auto-gen data   Michael Walle
• [RFC][PATCH] rpi: Fix DRAM size reporting to show total RAM   Peter Robinson
  • [RFC][PATCH] rpi: Fix DRAM size reporting to show total RAM   Anders Roxell
  • [RFC][PATCH] rpi: Fix DRAM size reporting to show total RAM   Anders Roxell
    • [RFC][PATCH] rpi: Fix DRAM size reporting to show total RAM   Peter Robinson
• [PATCH v2] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Brian Sune
• [PATCH v3] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Brian Sune
  • [PATCH v3] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Quentin Schulz
    • [PATCH v3] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
      • [PATCH v3] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Quentin Schulz
      • [PATCH v3] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
      • [PATCH v3] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Quentin Schulz
      • [PATCH v3] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
• [PATCH] board: ti: am335x: Fix DM_TPS65910 condition   Maarten Brock
  • [PATCH] board: ti: am335x: Fix DM_TPS65910 condition   Kory Maincent
  • [PATCH] board: ti: am335x: Fix DM_TPS65910 condition   Tom Rini
  • [PATCH] board: ti: am335x: Fix DM_TPS65910 condition   Markus Schneider-Pargmann
• [PATCH 1/4] ufs: cadence: Rename CONFIG_CADENCE_UFS to CONFIG_UFS_CADENCE   Marek Vasut
  • [PATCH 1/4] ufs: cadence: Rename CONFIG_CADENCE_UFS to CONFIG_UFS_CADENCE   Neil Armstrong
• [PATCH v3 1/2] test/py: fit: Deduplicate the test   Marek Vasut
  • [PATCH v3 2/2] mkimage: Add support for bundling TEE in mkimage -f auto   Marek Vasut
• [BUG] silent hangup when debugging lib/fdtdec.c   Tom Rini
  • [BUG] silent hangup when debugging lib/fdtdec.c   Alexander Feilke
    • Re: [BUG] silent hangup when debugging lib/fdtdec.c   alexander.feilke at ew.tq-group.com
  • Re: [BUG] silent hangup when debugging lib/fdtdec.c   alexander.feilke at ew.tq-group.com
    • [BUG] silent hangup when debugging lib/fdtdec.c   Tom Rini
      • Re: [BUG] silent hangup when debugging lib/fdtdec.c   alexander.feilke at ew.tq-group.com
      • [BUG] silent hangup when debugging lib/fdtdec.c   Fabio Estevam
• [PATCH 0/6] phytec: imx8: cleanup environments   Benjamin Hahn
  • [PATCH 2/6] phytec: adapt env to ampliphy-boot bootscripts for imx8 boards   Benjamin Hahn
  • [PATCH 3/6] phytec: add emmc_dev and sd_dev env vars for imx8 boards   Benjamin Hahn
  • [PATCH 4/6] phytec: set bootdevices and bootmeths in devicetree for imx8 boards   Benjamin Hahn
  • [PATCH 5/6] phytec: use fdtoverlay_addr_r   Benjamin Hahn
  • [PATCH 6/6] phytec: sort .env files alphabetically for imx8 boards   Benjamin Hahn
• [PATCH 1/6] phytec: change preferred bootdevice dynamically   Benjamin Hahn
  • [PATCH 1/6] phytec: change preferred bootdevice dynamically   Benjamin Hahn
• [PATCH] arm: dts: mediatek: switch mt8365 to OF_UPSTREAM   David Lechner
• [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Heinrich Schuchardt
  • [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Quentin Schulz
    • [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Heinrich Schuchardt
      • [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Quentin Schulz
      • [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Quentin Schulz
      • [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Heinrich Schuchardt
      • [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Quentin Schulz
      • [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Anand Moon
      • [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Heinrich Schuchardt
      • [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Anand Moon
      • [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Quentin Schulz
      • [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Anand Moon
      • [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Quentin Schulz
      • [BUG] Raxda Rock Pi 4A serial console output stops prematurely   Anand Moon
• [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Brian Sune
  • [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
    • [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Quentin Schulz
      • [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
      • [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
      • [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Chee, Tien Fong
      • [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
      • [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
      • [PATCH v4] SDRAM Calibration Failed fix for GEN5 SoCFPGA   Sune Brian
• [PATCH 0/5] i.MX7 Splash Screen and PWM fixes   Thomas Bonnefille
  • [PATCH 1/5] drivers: video: mxsfb: Use kconfig VIDEO_REMOVE to remove video   Thomas Bonnefille
  • [PATCH 2/5] arm: include: imx7: rename PWM registers to match driver name   Thomas Bonnefille
  • [PATCH 3/5] mx7: clock: add pwm enabling clock function   Thomas Bonnefille
  • [PATCH 4/5] pwm: imx: allow i.MX7 to use PWM3 and PWM4   Thomas Bonnefille
  • [PATCH 5/5] board: toradex: add splash screen to Toradex i.MX7D Colibri board   Thomas Bonnefille
    • [PATCH 5/5] board: toradex: add splash screen to Toradex i.MX7D Colibri board   Francesco Dolcini
      • [PATCH 5/5] board: toradex: add splash screen to Toradex i.MX7D Colibri board   Thomas Bonnefille
      • [PATCH 5/5] board: toradex: add splash screen to Toradex i.MX7D Colibri board   Francesco Dolcini
    • [PATCH 5/5] board: toradex: add splash screen to Toradex i.MX7D Colibri board   Francesco Dolcini
• [PATCH] mtd: spi-nor-tiny: fix 4-Byte address instructions for Cypress and ISSI   Shiji Yang
• [PATCH] mtd: spi-nor-ids: remove duplicate IDs for w25q32 and w25q512 series   Shiji Yang
• [PATCH 0/6] Support for Samsung Exynos 7870 CCF driver   Minkyu Kang
• [PATCH 0/2] Support for Samsung Exynos 7870 pin controllers in driver   Minkyu Kang
• [PATCH] serial: s5p: add compatible for exynos8895   Minkyu Kang
• [PATCH] soc: exynos-pmu: add support for Exynos7 PMU   Minkyu Kang
• [PATCH v2] gpio: s5p: increment bank base address only if bank is initialized   Minkyu Kang
• [GIT PULL] Please pull u-boot-imx-master-20251126   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-master-20251126   Tom Rini
• [PATCH] common: spl: Enable Instruction cache after relocation in board_init_r   Ernest Van Hoecke
  • [PATCH] common: spl: Enable Instruction cache after relocation in board_init_r   Kumar, Udit
• [PATCH v5 00/10] initial U-Boot SPL support on Amlogic GX SoCs   Ferass El Hafidi
  • [PATCH v5 02/10] mmc: meson_gx_mmc: add minimal non-DM driver   Ferass El Hafidi
    • [PATCH v5 02/10] mmc: meson_gx_mmc: add minimal non-DM driver   Neil Armstrong
  • [PATCH v5 03/10] serial: serial_meson: add minimal non-DM driver   Ferass El Hafidi
  • [PATCH v5 04/10] arm: meson: initial u-boot SPL support for GX SoCs   Ferass El Hafidi
  • [PATCH v5 05/10] arm: meson: spl: add support for SPL DRAM init   Ferass El Hafidi
  • [PATCH v5 06/10] arm: dts: meson: add meson-gxbb-u-boot.dtsi   Ferass El Hafidi
    • [PATCH v5 06/10] arm: dts: meson: add meson-gxbb-u-boot.dtsi   Neil Armstrong
  • [PATCH v5 07/10] arm: dts: meson-gx-u-boot: add binman configuration for U-Boot SPL   Ferass El Hafidi
  • [PATCH v5 08/10] board: amlogic: add kconfig fragments for SPL   Ferass El Hafidi
  • [PATCH v5 09/10] spl: meson: set SPL max size for GX SoCs   Ferass El Hafidi
    • [PATCH v5 09/10] spl: meson: set SPL max size for GX SoCs   Neil Armstrong
  • [PATCH v5 10/10] doc: board: amlogic: add u-boot-spl documentation   Ferass El Hafidi
• [PATCH v5 01/10] tools: mkimage: Add Amlogic Boot Image type   Ferass El Hafidi
• [PATCH] configs: toradex-smarc-imx95: set spl_stack   max.oss.09 at gmail.com
  • [PATCH] configs: toradex-smarc-imx95: set spl_stack   Francesco Dolcini
    • [PATCH] configs: toradex-smarc-imx95: set spl_stack   Fabio Estevam
  • [PATCH] configs: toradex-smarc-imx95: set spl_stack   Tom Rini
• [PATCH] ufs: Disable UTP command timeout in slow mode   Michal Simek
• [PATCH] common: memtop: Update the MEM_RGN_COUNT macro to 64   Michal Simek
• [PATCH] i2c: cdns: Add timeout for RXDV status bit polling   Michal Simek
• [PATCH 1/4] xilinx: amd: Enable the PCA9541 I2C Bus arbiter   Michal Simek
  • [PATCH 2/4] arm64: versal2: Enable USB5744 usb hub   Michal Simek
  • [PATCH 3/4] arm64: versal2: Update the text base and dtb address   Michal Simek
  • [PATCH 4/4] arm64: versal2: Enable reset and poweroff via sysreset framework   Michal Simek
• [PATCH] Dockerfile: Update building trace tools slightly   Tom Rini
  • [PATCH] Dockerfile: Update building trace tools slightly   Tom Rini
• [PATCH] cadence_qspi: Remove duplicated return   Michal Simek
• [PATCH] cadence_qspi: Update the delays for flash reset   Michal Simek
• [PATCH] CI: Update to latest container   Tom Rini
  • [PATCH] CI: Update to latest container   Tom Rini
• [PATCH] board: adi: Fix missing semicolon in nfsroot   Greg Malysa
  • [PATCH] board: adi: Fix missing semicolon in nfsroot   Tom Rini
• [PATCH] configs: am335x_hs_evm_spi_defconfig: Remove duplicate symbols   Tom Rini
  • [PATCH] configs: am335x_hs_evm_spi_defconfig: Remove duplicate symbols   Markus Schneider-Pargmann (TI.com)
  • [PATCH] configs: am335x_hs_evm_spi_defconfig: Remove duplicate symbols   Markus Schneider-Pargmann
  • [PATCH] configs: am335x_hs_evm_spi_defconfig: Remove duplicate symbols   Tom Rini
• [PATCH 0/4] dm: core: Support same compatible in host/gadget musb drivers   Markus Schneider-Pargmann (TI.com)
  • [PATCH 1/4] dm: core: Support multiple drivers with same compatibles   Markus Schneider-Pargmann (TI.com)
  • [PATCH 2/4] test: dm: Add compatible multimatch test   Markus Schneider-Pargmann (TI.com)
  • [PATCH 3/4] usb: musb-new: Relative ctrl_mod address parsing   Markus Schneider-Pargmann (TI.com)
  • [PATCH 4/4] usb: musb-new: Add compatibles for ti,musb-am33xx   Markus Schneider-Pargmann (TI.com)
• [PATCH] Dockerfile: Switch to distro-provided trace-cmd   Tom Rini
• [RFC PATCH v1 0/4] Add upstream board Xunlong Orange Pi RV   E Shattow
  • [RFC PATCH v1 1/4] riscv: dts: starfive: Add Orange Pi RV from upstream Linux for-next   E Shattow
  • [RFC PATCH v1 2/4] board: starfive: visionfive2: Add Orange Pi RV selection by product_id   E Shattow
  • [RFC PATCH v1 3/4] riscv: dts: Add placeholder files for pending upstream Orange Pi RV   E Shattow
  • [RFC PATCH v1 4/4] configs: starfive: Add Orange Pi RV to visionfive2   E Shattow
  • [RFC PATCH v1 0/4] Add upstream board Xunlong Orange Pi RV   Heinrich Schuchardt
    • [RFC PATCH v1 0/4] Add upstream board Xunlong Orange Pi RV   E Shattow
      • [RFC PATCH v1 0/4] Add upstream board Xunlong Orange Pi RV   Icenowy Zheng
• [for-master PATCH] Azure: Rework jobs for disk space and 29 jobs   Tom Rini
• [for-next PATCH 1/2] Azure: Rework world build to directly use the container   Tom Rini
  • [for-next PATCH 2/2] Azure: Rework binman testsuite job to directly use the container   Tom Rini
• [PATCH] arm64: versal2: Read and show multiboot value   Michal Simek
• [PATCH] xilinx: versal: Get rid of xlnx-versal-power.h from bindings   Michal Simek
• [PATCH 0/2] Add FRDM-IMX91 initial support   Joseph Guo
  • [PATCH 1/2] arm64: dts: add NXP FRDM-IMX91 device tree   Joseph Guo
  • [PATCH 2/2] imx: Support i.MX91 11x11 FRDM board   Joseph Guo
    • [PATCH 2/2] imx: Support i.MX91 11x11 FRDM board   Tom Rini
• [PATCH v2] test/py: nand: Add tests for NAND flash device   Love Kumar
  • [PATCH v2] test/py: nand: Add tests for NAND flash device   Tom Rini
• [PATCH 1/2] arm64: dts: add NXP FRDM-IMX91 device tree   Fabio Estevam
• [PATCH] efi_loader: Fix a memory leak when retrieving device paths from boot vars   Ilias Apalodimas
• [PATCH next v2 0/3] CI: use mirrors for GNU tools   Quentin Schulz
  • [PATCH next v2 1/3] CI: use GNU mirror for grub (and switch to HTTPS)   Quentin Schulz
  • [PATCH next v2 2/3] CI: use mirror for gnulib dependency of grub   Quentin Schulz
  • [PATCH next v2 3/3] CI: use coreboot mirror for GNU dependencies of coreboot   Quentin Schulz
• [PATCH 1/2] arch: arm: dts: k3-am625-phyboard-lyra: Drop bootph properties   Wadim Egorov
  • [PATCH 2/2] arch: arm: dts: k3-am642-phyboard-electra: Drop bootph properties   Wadim Egorov
• [PATCH] net: phy: broadcom: fix RGMII delays for BCM54210E   Michael Walle
  • [PATCH] net: phy: broadcom: fix RGMII delays for BCM54210E   Rafał Miłecki
• [PATCH 1/1] corstone1000: Add Cortex-A320 support on FVP   Frazer Carsley
• [PATCH] arm64: dts: rockchip: Fix audio-supply for ROCK Pi 4   Heinrich Schuchardt
• [PATCH 1/1] usb/xhci: debug message Register NbrPorts   Heinrich Schuchardt
  • [PATCH 1/1] usb/xhci: debug message Register NbrPorts   Marek Vasut
• [PATCH v6] boot/bootfdt: Add smbios3-entrypoint to FDT for non-EFI boots   Adriana Nicolae
• [PATCH 0/2] nxp-imx93image etype for the imx93   Jérémie Dautheribes
  • [PATCH 1/2] imx93-u-boot: move binman description   Jérémie Dautheribes
  • [PATCH 2/2] imx93-u-boot: use nxp-imx9image etype for binman node   Jérémie Dautheribes
• [PATCH v2] usb/xhci: avoid noisy 'Register NbrPorts' message   Heinrich Schuchardt
  • [PATCH v2] usb/xhci: avoid noisy 'Register NbrPorts' message   Marek Vasut
• [PATCH] binman: blob_dtb: improve error message when SPL is not found   Jérémie Dautheribes
  • [PATCH] binman: blob_dtb: improve error message when SPL is not found   Tom Rini
    • [PATCH] binman: blob_dtb: improve error message when SPL is not found   Jérémie Dautheribes
• [PATCH] imx9: scmi: soc: USB instance number change for silicon revision B0   Marek Vasut
  • [PATCH] imx9: scmi: soc: USB instance number change for silicon revision B0   Fedor Ross
    • 回复: [EXT] [PATCH] imx9: scmi: soc: USB instance number change for silicon revision B0   Alice Guo
• [PATCH v1] Fix socfpga GEN5 boot by spl+u-boot sfp on RAW   Brian Sune
  • [PATCH v1] Fix socfpga GEN5 boot by spl+u-boot sfp on RAW   Jan Kiszka
    • [PATCH v1] Fix socfpga GEN5 boot by spl+u-boot sfp on RAW   Sune Brian
      • [PATCH v1] Fix socfpga GEN5 boot by spl+u-boot sfp on RAW   Jan Kiszka
      • [PATCH v1] Fix socfpga GEN5 boot by spl+u-boot sfp on RAW   Sune Brian
• [PATCH 1/2] imx: container: Eliminate IMX_PQC_SUPPORT   Marek Vasut
  • [PATCH 2/2] imx: Eliminate IMX95_A0   Marek Vasut
  • [PATCH 1/2] imx: container: Eliminate IMX_PQC_SUPPORT   Ye Li
    • [PATCH 1/2] imx: container: Eliminate IMX_PQC_SUPPORT   Marek Vasut
      • [PATCH 1/2] imx: container: Eliminate IMX_PQC_SUPPORT   Ye Li
      • [PATCH 1/2] imx: container: Eliminate IMX_PQC_SUPPORT   Marek Vasut
• [PATCH 0/2] Fix boot for TI AM571x HS EVM board   Beleswar Padhi
  • [PATCH 1/2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Beleswar Padhi
    • [PATCH 1/2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Kumar, Udit
    • [PATCH 1/2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Tom Rini
  • [PATCH 2/2] arm: dts: am571x-idk: Reserve EMIF memory used by PPA   Beleswar Padhi
    • [PATCH 2/2] arm: dts: am571x-idk: Reserve EMIF memory used by PPA   Kumar, Udit
      • [PATCH 2/2] arm: dts: am571x-idk: Reserve EMIF memory used by PPA   Padhi, Beleswar
• [PATCH 1/1] usb: xhci: avoid noisy 'Starting the controller' message.   Heinrich Schuchardt
  • [PATCH 1/1] usb: xhci: avoid noisy 'Starting the controller' message.   Mattijs Korpershoek
• 撤回: [EXT] [PATCH] imx9: scmi: soc: USB instance number change for silicon revision B0   Alice Guo
• [PATCH 0/2] clk: ti: Cleanup common functions and omap-cm   Markus Schneider-Pargmann (TI.com)
  • [PATCH 1/2] clk: ti: Split common omap2plus functions into new symbol   Markus Schneider-Pargmann (TI.com)
  • [PATCH 2/2] clk: ti: omap4-cm: Add Kconfig symbol   Markus Schneider-Pargmann (TI.com)
• [PATCH] simple-pm-bus: Make clocks optional   Markus Schneider-Pargmann (TI.com)
• [PATCH 0/2] video: simple_panel support for am335x evm panel   Markus Schneider-Pargmann (TI.com)
  • [PATCH 1/2] video: simple_panel: Add tfc_s9700rtwv43tr_01b   Markus Schneider-Pargmann (TI.com)
    • [PATCH 1/2] video: simple_panel: Add tfc_s9700rtwv43tr_01b   Fabio Estevam
  • [PATCH 2/2] video: ti: am335x: Support OF graph   Markus Schneider-Pargmann (TI.com)
• [PATCH] arm: dts: k3-am62d-evm-binman: Update DM   Paresh Bhagat
• [PATCH v2] binman: blob_dtb: improve error message when SPL is not found   Jérémie Dautheribes
• [PATCH 0/4] Enable USB on i.MX8ULP EVK   alice.guo at oss.nxp.com
  • [PATCH v1 1/4] ehci-mx6: Add powerup_fixup implementation   alice.guo at oss.nxp.com
  • [PATCH v1 2/4] ehci-mx6: Update USB host driver for iMX8ULP   alice.guo at oss.nxp.com
  • [PATCH v1 3/4] imx8ulp: clock: Drop CONFIG_USB_MAX_CONTROLLER_COUNT dependency   alice.guo at oss.nxp.com
  • [PATCH v1 4/4] imx8ulp: dst: Enable USB controller at 0x29920000 in host mode   alice.guo at oss.nxp.com
    • [PATCH v1 4/4] imx8ulp: dst: Enable USB controller at 0x29920000 in host mode   Fabio Estevam
• Pull request: rpi-2026.01   Peter Robinson
  • Pull request: rpi-2026.01   Tom Rini
• [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Beleswar Padhi
  • [PATCH v2] configs: am571x_hs_evm_defconfig: Reserve EMIF memory used by PPA   Kumar, Udit