[PATCH] arm: Remove remainder of xpress board code

[Tom Rini]

When this platform was removed the config header file was missed. Remove
that now.

Fixes: ddfc00400965 ("arm: Remove xpress board")
Signed-off-by: Tom Rini <trini at konsulko.com>
---
 include/configs/xpress.h | 86 ----------------------------------------
 1 file changed, 86 deletions(-)
 delete mode 100644 include/configs/xpress.h

diff --git a/include/configs/xpress.h b/include/configs/xpress.h
deleted file mode 100644
index aa4dd3e9b8d9..000000000000
--- a/include/configs/xpress.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2015-2016 Stefan Roese <sr at denx.de>
- *
- * Configuration settings for the CCV xPress board
- */
-#ifndef __XPRESS_CONFIG_H
-#define __XPRESS_CONFIG_H
-
-#include "mx6_common.h"
-#include <asm/mach-imx/gpio.h>
-
-#define CFG_MXC_UART_BASE		MX6UL_UART7_BASE_ADDR
-
-/* MMC Configs */
-#define CFG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
-
-/* Miscellaneous configurable options */
-
-/* Physical Memory Map */
-#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE			(128 << 20)
-
-#define CFG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CFG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CFG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-
-/* Environment is in stored in the eMMC boot partition */
-
-#define CFG_FEC_ENET_DEV		0
-#define CFG_FEC_MXC_PHYADDR          0x0
-
-#define CFG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"image=zImage\0" \
-	"console=ttymxc6\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
-	"fdt_file=undefined\0" \
-	"fdt_addr=0x83000000\0" \
-	"boot_fdt=try\0" \
-	"ip_dyn=yes\0" \
-	"mmcdev="__stringify(CONFIG_ENV_MMC_DEVICE_INDEX)"\0" \
-	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-	"mmcautodetect=yes\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
-	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	"uboot=ccv/u-boot.imx\0"					\
-	"uboot_start=0x2\0"						\
-	"uboot_size=0x3fe\0"						\
-	"update_uboot=if tftp ${uboot}; then "				\
-		"if itest ${filesize} > 0; then "			\
-			"mmc dev 0 1;"					\
-			"setexpr blkc ${filesize} / 0x200;"		\
-			"setexpr blkc ${blkc} + 1;"			\
-			"if itest ${blkc} <= ${uboot_size}; then "	\
-				"mmc write ${loadaddr} ${uboot_start} "	\
-					"${blkc};"			\
-			"fi;"						\
-		"fi; fi;"						\
-		"setenv filesize; setenv blkc\0"			\
-	"update_bootpart=mmc bootbus 0 2 1 2;mmc partconf 0 1 1 0\0"
-
-#endif /* __XPRESS_CONFIG_H */
-- 
2.43.0